diff options
Diffstat (limited to 'resources/definitions')
-rw-r--r-- | resources/definitions/SV02.def.json | 1 | ||||
-rw-r--r-- | resources/definitions/fdmprinter.def.json | 2 | ||||
-rw-r--r-- | resources/definitions/ultimaker.def.json | 133 | ||||
-rw-r--r-- | resources/definitions/ultimaker3.def.json | 16 | ||||
-rw-r--r-- | resources/definitions/ultimaker_s3.def.json | 17 | ||||
-rw-r--r-- | resources/definitions/ultimaker_s5.def.json | 17 | ||||
-rw-r--r-- | resources/definitions/uni_base.def.json | 1 | ||||
-rw-r--r-- | resources/definitions/voron2_base.def.json | 3 | ||||
-rw-r--r-- | resources/definitions/zav_base.def.json | 1 |
9 files changed, 129 insertions, 62 deletions
diff --git a/resources/definitions/SV02.def.json b/resources/definitions/SV02.def.json index 067422354e..352cd23394 100644 --- a/resources/definitions/SV02.def.json +++ b/resources/definitions/SV02.def.json @@ -44,7 +44,6 @@ "machine_max_jerk_xy": { "value": 8 },
"machine_max_jerk_z": { "value": 0.4 },
"machine_max_jerk_e": { "value": 5 },
- "machine_heated_bed": { "default_value": true },
"material_diameter": { "default_value": 1.75 },
"infill_overlap": { "default_value": 15 },
"acceleration_print": { "value": 500 },
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index c411162359..6763cbb7f2 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -2256,7 +2256,7 @@ "maximum_value": "machine_height", "maximum_value_warning": "resolveOrValue('infill_sparse_thickness') * 10", "type": "float", - "value": "0 if infill_sparse_density > 0 else 0", + "value": "0", "limit_to_extruder": "infill_extruder_nr", "enabled": "infill_sparse_density > 0", "settable_per_mesh": true, diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 5818c11a6f..8c6d8c0dda 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -50,23 +50,29 @@ "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }, - "infill_before_walls": { - "value": "False" - }, "infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" }, "retraction_combing": { "value": "'no_outer_surfaces'" }, + "retraction_count_max": { + "value": 25 + }, + "retraction_extrusion_window": { + "value": 1 + }, "roofing_layer_count": { - "value": "0" + "value": "1" }, "roofing_material_flow": { "value": "material_flow" }, "skin_material_flow": { - "value": "0.97 * material_flow" + "value": "0.95 * material_flow" + }, + "support_interface_material_flow": { + "value": "skin_material_flow" }, "skin_monotonic" : { "value": true @@ -89,11 +95,124 @@ "meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" }, - "jerk_travel": { - "value": "jerk_print" + "jerk_travel_enabled": { + "value": false + }, + "acceleration_travel_enabled": { + "value": false }, "acceleration_travel": { "value": "acceleration_wall" + }, + "skin_edge_support_thickness": { + "value": "4 * layer_height if infill_sparse_density < 30 else 0" + }, + "bridge_settings_enabled": { + "value": false + }, + "bridge_wall_min_length": { + "value": 0 + }, + "bridge_skin_support_threshold": { + "value": 50 + }, + "bridge_sparse_infill_max_density": { + "value": 0 + }, + "bridge_wall_coast": { + "value": 0 + }, + "bridge_wall_speed": { + "value": "speed_wall" + }, + "bridge_wall_material_flow": { + "value": "wall_material_flow" + }, + "bridge_skin_speed": { + "value": "speed_topbottom" + }, + "bridge_skin_material_flow": { + "value": "skin_material_flow" + }, + "bridge_skin_density": { + "value": "80" + }, + "bridge_fan_speed": { + "value": "cool_fan_speed_max" + }, + "bridge_enable_more_layers": { + "value": false + }, + "bridge_skin_speed_2": { + "value": "speed_topbottom" + }, + "bridge_skin_material_flow_2": { + "value": "skin_material_flow" + }, + "bridge_skin_density_2": { + "value": 100 + }, + "bridge_fan_speed_2": { + "value": "cool_fan_speed_min" + }, + "bridge_skin_speed_3": { + "value": "speed_topbottom" + }, + "bridge_skin_material_flow_3": { + "value": "skin_material_flow" + }, + "bridge_skin_density_3": { + "value": 100 + }, + "bridge_fan_speed_3": { + "value": "cool_fan_speed_min" + }, + "jerk_print": { + "value": "20", + "minimum_value_warning": 20 + }, + "jerk_infill": { + "minimum_value_warning": 20 + }, + "jerk_wall": { + "minimum_value_warning": 20 + }, + "jerk_wall_0": { + "minimum_value_warning": 20 + }, + "jerk_roofing": { + "minimum_value_warning": 20 + }, + "jerk_topbottom": { + "minimum_value_warning": 20 + }, + "jerk_support": { + "minimum_value_warning": 20 + }, + "jerk_support_infill": { + "minimum_value_warning": 20 + }, + "jerk_support_interface": { + "minimum_value_warning": 20 + }, + "jerk_prime_tower": { + "minimum_value_warning": 20 + }, + "jerk_layer_0": { + "minimum_value_warning": 20 + }, + "jerk_print_layer_0": { + "minimum_value_warning": 20 + }, + "jerk_travel": { + "value": "jerk_print", + "minimum_value_warning": 20 + }, + "jerk_travel_layer_0": { + "minimum_value_warning": 20 + }, + "jerk_skirt_brim": { + "minimum_value_warning": 20 } } } diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index fd21ab5271..858d5f91a7 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -101,20 +101,6 @@ "infill_wipe_dist": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, - "jerk_print": { "value": "20", "minimum_value_warning": 20 }, - "jerk_infill": {"minimum_value_warning": 20 }, - "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 }, - "jerk_roofing": {"minimum_value_warning": 20 }, - "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support_infill": {"minimum_value_warning": 20 }, - "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"}, - "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20}, - "jerk_print_layer_0": {"minimum_value_warning": 20 }, - "jerk_travel_layer_0": {"minimum_value_warning": 20 }, - "jerk_skirt_brim": {"minimum_value_warning": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -136,8 +122,6 @@ "raft_margin": { "value": "10" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, - "retraction_count_max": { "value": "10" }, - "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 640a062c6d..67f8ddab83 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -93,20 +93,6 @@ "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, - "jerk_print": { "value": "20", "minimum_value_warning": 20 }, - "jerk_infill": {"minimum_value_warning": 20 }, - "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 }, - "jerk_roofing": {"minimum_value_warning": 20 }, - "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support_infill": {"minimum_value_warning": 20 }, - "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"}, - "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20}, - "jerk_print_layer_0": {"minimum_value_warning": 20 }, - "jerk_travel_layer_0": {"minimum_value_warning": 20 }, - "jerk_skirt_brim": {"minimum_value_warning": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -128,8 +114,6 @@ "raft_speed": { "value": "25" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, - "retraction_count_max": { "value": "10" }, - "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, @@ -155,7 +139,6 @@ "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, "top_bottom_thickness": { "value": "1" }, - "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 0d5d7499cc..005c876117 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -95,20 +95,6 @@ "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, - "jerk_print": { "value": "20", "minimum_value_warning": 20 }, - "jerk_infill": {"minimum_value_warning": 20 }, - "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 }, - "jerk_roofing": {"minimum_value_warning": 20 }, - "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_support_infill": {"minimum_value_warning": 20 }, - "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"}, - "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 }, - "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20}, - "jerk_print_layer_0": {"minimum_value_warning": 20 }, - "jerk_travel_layer_0": {"minimum_value_warning": 20 }, - "jerk_skirt_brim": {"minimum_value_warning": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -130,8 +116,6 @@ "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'"}, - "retraction_count_max": { "value": "10" }, - "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, @@ -157,7 +141,6 @@ "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, "top_bottom_thickness": { "value": "1" }, - "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, diff --git a/resources/definitions/uni_base.def.json b/resources/definitions/uni_base.def.json index 06ba86de2d..82b05f3366 100644 --- a/resources/definitions/uni_base.def.json +++ b/resources/definitions/uni_base.def.json @@ -138,7 +138,6 @@ "machine_height": {"default_value": 250}, "machine_extruder_count": {"value": 2}, "machine_buildplate_type": {"value": "glass"}, - "machine_heated_bed": {"default_value": true}, "machine_center_is_zero": {"default_value": false}, "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"}, "machine_head_with_fans_polygon": {"default_value": [ diff --git a/resources/definitions/voron2_base.def.json b/resources/definitions/voron2_base.def.json index ec069b24fb..b9a1484ae7 100644 --- a/resources/definitions/voron2_base.def.json +++ b/resources/definitions/voron2_base.def.json @@ -98,8 +98,9 @@ "machine_start_gcode": { "default_value": "print_start" }, "machine_end_gcode": { "default_value": "print_end" }, "adhesion_type": { "default_value": "skirt" }, + "retraction_amount": { "default_value": 0.75 }, "skirt_brim_minimal_length": { "default_value": 550 }, - "retraction_speed": { "default_value": 80, "maximum_value_warning": 130 }, + "retraction_speed": { "default_value": 30, "maximum_value_warning": 130 }, "retraction_retract_speed": { "maximum_value_warning": 130 }, "retraction_prime_speed": { "value": "math.ceil(retraction_speed * 0.4)", "maximum_value_warning": 130 }, "retraction_hop_enabled": { "default_value": true }, diff --git a/resources/definitions/zav_base.def.json b/resources/definitions/zav_base.def.json index 1ef9398987..9f73419d46 100644 --- a/resources/definitions/zav_base.def.json +++ b/resources/definitions/zav_base.def.json @@ -147,7 +147,6 @@ "machine_height": {"default_value": 270}, "machine_extruder_count": {"value": 1}, "machine_buildplate_type": {"value": "glass"}, - "machine_heated_bed": {"default_value": true}, "machine_center_is_zero": {"default_value": false}, "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"}, "machine_head_with_fans_polygon": {"default_value": [ |