diff options
Diffstat (limited to 'resources/i18n/de_DE/fdmprinter.def.json.po')
| -rw-r--r-- | resources/i18n/de_DE/fdmprinter.def.json.po | 418 |
1 files changed, 335 insertions, 83 deletions
diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po index 25ee8fcf09..deb12a31b2 100644 --- a/resources/i18n/de_DE/fdmprinter.def.json.po +++ b/resources/i18n/de_DE/fdmprinter.def.json.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 4.13\n" "Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2021-12-10 11:59+0000\n" +"POT-Creation-Date: 2022-04-13 10:49+0000\n" "PO-Revision-Date: 2021-04-16 15:16+0200\n" "Last-Translator: Lionbridge <info@lionbridge.com>\n" "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n" @@ -466,8 +466,8 @@ msgstr "Gerätekopf und Lüfter Polygon" #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon description" -msgid "A 2D silhouette of the print head (fan caps included)." -msgstr "Eine 2D-Shilhouette des Druckkopfes (mit Lüfterkappen)." +msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates." +msgstr "" #: fdmprinter.def.json msgctxt "gantry_height label" @@ -740,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder." msgstr "Der Durchmesser des Rades für den Transport des Materials in den Feeder." #: fdmprinter.def.json +msgctxt "machine_scale_fan_speed_zero_to_one label" +msgid "Scale Fan Speed To 0-1" +msgstr "" + +#: fdmprinter.def.json +msgctxt "machine_scale_fan_speed_zero_to_one description" +msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256." +msgstr "" + +#: fdmprinter.def.json msgctxt "resolution label" msgid "Quality" msgstr "Qualität" @@ -960,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is msgstr "Die Anzahl der Wände. Wenn diese anhand der Wanddicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet." #: fdmprinter.def.json +msgctxt "wall_transition_length label" +msgid "Wall Transition Length" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_length description" +msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_distribution_count label" +msgid "Wall Distribution Count" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_distribution_count description" +msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_angle label" +msgid "Wall Transitioning Threshold Angle" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_angle description" +msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_filter_distance label" +msgid "Wall Transitioning Filter Distance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_filter_distance description" +msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_filter_deviation label" +msgid "Wall Transitioning Filter Margin" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_transition_filter_deviation description" +msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." +msgstr "" + +#: fdmprinter.def.json msgctxt "wall_0_wipe_dist label" msgid "Outer Wall Wipe Distance" msgstr "Wipe-Abstand der Außenwand" @@ -990,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number msgstr "Optimieren Sie die Reihenfolge, in der die Wände gedruckt werden, um die Anzahl der Einzüge und die zurückgelegten Distanzen zu reduzieren. Dieser Schritt bringt für die meisten Teile Vorteile, allerdings werden einige möglicherweise länger benötigen. Vergleichen Sie deshalb bitte die Schätzung der Druckzeiten mit und ohne Optimierung. Bei Wahl eines Brims als Druckplattenhaftungstyp ist die erste Schicht nicht optimiert." #: fdmprinter.def.json -msgctxt "outer_inset_first label" -msgid "Outer Before Inner Walls" -msgstr "Außenwände vor Innenwänden" +msgctxt "inset_direction label" +msgid "Wall Ordering" +msgstr "" + +#: fdmprinter.def.json +msgctxt "inset_direction description" +msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed." +msgstr "" + +#: fdmprinter.def.json +msgctxt "inset_direction option inside_out" +msgid "Inside To Outside" +msgstr "" #: fdmprinter.def.json -msgctxt "outer_inset_first description" -msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs." -msgstr "Druckt Wände bei Aktivierung von außen nach innen. Dies kann die Maßgenauigkeit in X und Y erhöhen, wenn hochviskose Kunststoffe wie ABS verwendet werden; allerdings kann es die Druckqualität der Außenfläche vermindern, insbesondere bei Überhängen." +msgctxt "inset_direction option outside_in" +msgid "Outside To Inside" +msgstr "" #: fdmprinter.def.json msgctxt "alternate_extra_perimeter label" @@ -1010,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be msgstr "Es wird eine Zusatzwand für jede zweite Schicht gedruckt. Auf diese Weise gelangt Füllung zwischen diese Zusatzwände, was zu stärkeren Drucken führt." #: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_enabled label" -msgid "Compensate Wall Overlaps" -msgstr "Wandüberlappungen ausgleichen" - -#: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_enabled description" -msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place." -msgstr "Der Fluss für Teile einer Wand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." - -#: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_0_enabled label" -msgid "Compensate Outer Wall Overlaps" -msgstr "Außenwandüberlappungen ausgleichen" +msgctxt "min_wall_line_width label" +msgid "Minimum Wall Line Width" +msgstr "" #: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_0_enabled description" -msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place." -msgstr "Der Fluss für Teile einer Außenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." +msgctxt "min_wall_line_width description" +msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width." +msgstr "" #: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_x_enabled label" -msgid "Compensate Inner Wall Overlaps" -msgstr "Innenwandüberlappungen ausgleichen" +msgctxt "min_even_wall_line_width label" +msgid "Minimum Even Wall Line Width" +msgstr "" #: fdmprinter.def.json -msgctxt "travel_compensate_overlapping_walls_x_enabled description" -msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place." -msgstr "Der Fluss für Teile einer Innenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." +msgctxt "min_even_wall_line_width description" +msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width." +msgstr "" #: fdmprinter.def.json -msgctxt "wall_min_flow label" -msgid "Minimum Wall Flow" -msgstr "Mindestwandfluss" +msgctxt "wall_split_middle_threshold label" +msgid "Split Middle Line Threshold" +msgstr "" #: fdmprinter.def.json -msgctxt "wall_min_flow description" -msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls." -msgstr "Minimal zulässiger Fluss als Prozentwert für eine Wandlinie. Die Wand-Überlappungskompensation reduziert den Fluss einer Wand, wenn sie nah an einer vorhandenen Wand liegt. Wände, deren Fluss unter diesem Wert liegt, werden durch eine Fahrbewegung ersetzt. Bei Verwendung dieser Einstellung müssen Sie die Wand-Überlappungskompensation aktivieren und die Außenwand vor den Innenwänden drucken." +msgctxt "wall_split_middle_threshold description" +msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall." +msgstr "" #: fdmprinter.def.json -msgctxt "wall_min_flow_retract label" -msgid "Prefer Retract" -msgstr "Einziehen bevorzugt" +msgctxt "min_odd_wall_line_width label" +msgid "Minimum Odd Wall Line Width" +msgstr "" #: fdmprinter.def.json -msgctxt "wall_min_flow_retract description" -msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold." -msgstr "Bei Aktivierung wird der Einzug anstelle des Combings für zurückzulegende Wege verwendet, die Wände ersetzen, deren Fluss unter der mindestens erforderlichen Flussschwelle liegt." +msgctxt "min_odd_wall_line_width description" +msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width," +msgstr "" #: fdmprinter.def.json -msgctxt "fill_perimeter_gaps label" -msgid "Fill Gaps Between Walls" -msgstr "Lücken zwischen Wänden füllen" +msgctxt "wall_add_middle_threshold label" +msgid "Add Middle Line Threshold" +msgstr "" #: fdmprinter.def.json -msgctxt "fill_perimeter_gaps description" -msgid "Fills the gaps between walls where no walls fit." -msgstr "Füllt die Lücken zwischen den Wänden, wo keine Wand passt." +msgctxt "wall_add_middle_threshold description" +msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall." +msgstr "" #: fdmprinter.def.json -msgctxt "fill_perimeter_gaps option nowhere" -msgid "Nowhere" -msgstr "Nirgends" +msgctxt "fill_outline_gaps label" +msgid "Print Thin Walls" +msgstr "Drucken von dünnen Wänden" #: fdmprinter.def.json -msgctxt "fill_perimeter_gaps option everywhere" -msgid "Everywhere" -msgstr "Überall" +msgctxt "fill_outline_gaps description" +msgid "Print pieces of the model which are horizontally thinner than the nozzle size." +msgstr "Drucken Sie Teile des Modells, die horizontal dünner als die Düsengröße sind." #: fdmprinter.def.json -msgctxt "filter_out_tiny_gaps label" -msgid "Filter Out Tiny Gaps" -msgstr "Kleine Lücken ausfiltern" +msgctxt "min_feature_size label" +msgid "Minimum Feature Size" +msgstr "" #: fdmprinter.def.json -msgctxt "filter_out_tiny_gaps description" -msgid "Filter out tiny gaps to reduce blobs on outside of model." -msgstr "Kleine Lücken ausfiltern, um Tropfen an der Außenseite des Modells zu reduzieren." +msgctxt "min_feature_size description" +msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width." +msgstr "" #: fdmprinter.def.json -msgctxt "fill_outline_gaps label" -msgid "Print Thin Walls" -msgstr "Drucken von dünnen Wänden" +msgctxt "min_bead_width label" +msgid "Minimum Thin Wall Line Width" +msgstr "" #: fdmprinter.def.json -msgctxt "fill_outline_gaps description" -msgid "Print pieces of the model which are horizontally thinner than the nozzle size." -msgstr "Drucken Sie Teile des Modells, die horizontal dünner als die Düsengröße sind." +msgctxt "min_bead_width description" +msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself." +msgstr "" #: fdmprinter.def.json msgctxt "xy_offset label" @@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod msgstr "Um die Schrumpfung des Materials beim Abkühlen zu kompensieren, wird das Modell mit diesem Faktor skaliert." #: fdmprinter.def.json +msgctxt "material_shrinkage_percentage_xy label" +msgid "Horizontal Scaling Factor Shrinkage Compensation" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_shrinkage_percentage_xy description" +msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_shrinkage_percentage_z label" +msgid "Vertical Scaling Factor Shrinkage Compensation" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_shrinkage_percentage_z description" +msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)." +msgstr "" + +#: fdmprinter.def.json msgctxt "material_crystallinity label" msgid "Crystalline Material" msgstr "Kristallines Material" @@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge msgstr "Die ersten Schichten werden langsamer als der Rest des Modells gedruckt, damit sie besser am Druckbett haften und um die Wahrscheinlichkeit eines erfolgreichen Drucks zu erhöhen. Die Geschwindigkeit wird während des Druckens dieser Schichten schrittweise erhöht." #: fdmprinter.def.json -msgctxt "speed_equalize_flow_enabled label" -msgid "Equalize Filament Flow" -msgstr "Ausgleich des Filamentflusses" - -#: fdmprinter.def.json -msgctxt "speed_equalize_flow_enabled description" -msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines." -msgstr "Drucken Sie dünnere Linien schneller als normale Linien, so dass die Menge des extrudierten Materials pro Sekunde gleich bleibt. Dünne Teile in Ihrem Modell erfordern möglicherweise einen Liniendruck mit geringerer Linienbreite als in den Einstellungen vorgesehen. Diese Einstellung steuert die Geschwindigkeitsänderungen für diese Linien." - -#: fdmprinter.def.json -msgctxt "speed_equalize_flow_max label" -msgid "Maximum Speed for Flow Equalization" -msgstr "Maximale Geschwindigkeit für Flussausgleich" +msgctxt "speed_equalize_flow_width_factor label" +msgid "Flow Equalization Ratio" +msgstr "" #: fdmprinter.def.json -msgctxt "speed_equalize_flow_max description" -msgid "Maximum print speed when adjusting the print speed in order to equalize flow." -msgstr "Maximale Druckgeschwindigkeit bei der Justierung der Druckgeschwindigkeit zum Ausgleich des Flusses." +msgctxt "speed_equalize_flow_width_factor description" +msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines." +msgstr "" #: fdmprinter.def.json msgctxt "acceleration_enabled label" @@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used msgstr "Das für das Drucken von Skirt/Brim/Raft verwendete Extruder-Element. Diese wird für die Mehrfach-Extrusion benutzt." #: fdmprinter.def.json +msgctxt "skirt_brim_extruder_nr label" +msgid "Skirt/Brim Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "skirt_brim_extruder_nr description" +msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_base_extruder_nr label" +msgid "Raft Base Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_base_extruder_nr description" +msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_interface_extruder_nr label" +msgid "Raft Middle Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_interface_extruder_nr description" +msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_surface_extruder_nr label" +msgid "Raft Top Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_surface_extruder_nr description" +msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json msgctxt "skirt_line_count label" msgid "Skirt Line Count" msgstr "Anzahl der Skirt-Linien" @@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing msgstr "Der Abstand zwischen den Raft-Linien der Raft-Oberflächenschichten. Der Abstand sollte der Linienbreite entsprechen, damit die Oberfläche stabil ist." #: fdmprinter.def.json +msgctxt "raft_interface_layers label" +msgid "Raft Middle Layers" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_interface_layers description" +msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft." +msgstr "" + +#: fdmprinter.def.json msgctxt "raft_interface_thickness label" msgid "Raft Middle Thickness" msgstr "Dicke der Raft-Mittelbereichs" @@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu msgstr "Die maximal zulässige Abweichung bei Reduzierung der maximalen Auflösung. Wenn Sie diesen Wert erhöhen, wird der Druck ungenauer, der G-Code wird jedoch kleiner. Die maximale Abweichung ist eine Grenze für die maximale Auflösung. Wenn die beiden Werte sich widersprechen, wird stets die maximale Abweichung eingehalten." #: fdmprinter.def.json +msgctxt "meshfix_maximum_extrusion_area_deviation label" +msgid "Maximum Extrusion Area Deviation" +msgstr "" + +#: fdmprinter.def.json +msgctxt "meshfix_maximum_extrusion_area_deviation description" +msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller." +msgstr "" + +#: fdmprinter.def.json msgctxt "blackmagic label" msgid "Special Modes" msgstr "Sonderfunktionen" @@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t msgstr "Bei kleinen Details wird die Geschwindigkeit bei der ersten Schicht auf diesen Prozentsatz der normalen Druckgeschwindigkeit gesetzt. Durch eine niedrigere Druckgeschwindigkeit können die Haftung und die Genauigkeit verbessert werden." #: fdmprinter.def.json +msgctxt "material_alternate_walls label" +msgid "Alternate Wall Directions" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_alternate_walls description" +msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing." +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_remove_inside_corners label" +msgid "Remove Raft Inside Corners" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_remove_inside_corners description" +msgid "Remove inside corners from the raft, causing the raft to become convex." +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_base_wall_count label" +msgid "Raft Base Wall Count" +msgstr "" + +#: fdmprinter.def.json +msgctxt "raft_base_wall_count description" +msgid "The number of contours to print around the linear pattern in the base layer of the raft." +msgstr "" + +#: fdmprinter.def.json msgctxt "command_line_settings label" msgid "Command Line Settings" msgstr "Einstellungen Befehlszeile" @@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description" msgid "Transformation matrix to be applied to the model when loading it from file." msgstr "Transformationsmatrix, die beim Laden aus der Datei auf das Modell angewandt wird." +#~ msgctxt "machine_head_with_fans_polygon description" +#~ msgid "A 2D silhouette of the print head (fan caps included)." +#~ msgstr "Eine 2D-Shilhouette des Druckkopfes (mit Lüfterkappen)." + +#~ msgctxt "outer_inset_first label" +#~ msgid "Outer Before Inner Walls" +#~ msgstr "Außenwände vor Innenwänden" + +#~ msgctxt "outer_inset_first description" +#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs." +#~ msgstr "Druckt Wände bei Aktivierung von außen nach innen. Dies kann die Maßgenauigkeit in X und Y erhöhen, wenn hochviskose Kunststoffe wie ABS verwendet werden; allerdings kann es die Druckqualität der Außenfläche vermindern, insbesondere bei Überhängen." + +#~ msgctxt "travel_compensate_overlapping_walls_enabled label" +#~ msgid "Compensate Wall Overlaps" +#~ msgstr "Wandüberlappungen ausgleichen" + +#~ msgctxt "travel_compensate_overlapping_walls_enabled description" +#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place." +#~ msgstr "Der Fluss für Teile einer Wand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." + +#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label" +#~ msgid "Compensate Outer Wall Overlaps" +#~ msgstr "Außenwandüberlappungen ausgleichen" + +#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description" +#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place." +#~ msgstr "Der Fluss für Teile einer Außenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." + +#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label" +#~ msgid "Compensate Inner Wall Overlaps" +#~ msgstr "Innenwandüberlappungen ausgleichen" + +#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description" +#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place." +#~ msgstr "Der Fluss für Teile einer Innenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet." + +#~ msgctxt "wall_min_flow label" +#~ msgid "Minimum Wall Flow" +#~ msgstr "Mindestwandfluss" + +#~ msgctxt "wall_min_flow description" +#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls." +#~ msgstr "Minimal zulässiger Fluss als Prozentwert für eine Wandlinie. Die Wand-Überlappungskompensation reduziert den Fluss einer Wand, wenn sie nah an einer vorhandenen Wand liegt. Wände, deren Fluss unter diesem Wert liegt, werden durch eine Fahrbewegung ersetzt. Bei Verwendung dieser Einstellung müssen Sie die Wand-Überlappungskompensation aktivieren und die Außenwand vor den Innenwänden drucken." + +#~ msgctxt "wall_min_flow_retract label" +#~ msgid "Prefer Retract" +#~ msgstr "Einziehen bevorzugt" + +#~ msgctxt "wall_min_flow_retract description" +#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold." +#~ msgstr "Bei Aktivierung wird der Einzug anstelle des Combings für zurückzulegende Wege verwendet, die Wände ersetzen, deren Fluss unter der mindestens erforderlichen Flussschwelle liegt." + +#~ msgctxt "fill_perimeter_gaps label" +#~ msgid "Fill Gaps Between Walls" +#~ msgstr "Lücken zwischen Wänden füllen" + +#~ msgctxt "fill_perimeter_gaps description" +#~ msgid "Fills the gaps between walls where no walls fit." +#~ msgstr "Füllt die Lücken zwischen den Wänden, wo keine Wand passt." + +#~ msgctxt "fill_perimeter_gaps option nowhere" +#~ msgid "Nowhere" +#~ msgstr "Nirgends" + +#~ msgctxt "fill_perimeter_gaps option everywhere" +#~ msgid "Everywhere" +#~ msgstr "Überall" + +#~ msgctxt "filter_out_tiny_gaps label" +#~ msgid "Filter Out Tiny Gaps" +#~ msgstr "Kleine Lücken ausfiltern" + +#~ msgctxt "filter_out_tiny_gaps description" +#~ msgid "Filter out tiny gaps to reduce blobs on outside of model." +#~ msgstr "Kleine Lücken ausfiltern, um Tropfen an der Außenseite des Modells zu reduzieren." + +#~ msgctxt "speed_equalize_flow_enabled label" +#~ msgid "Equalize Filament Flow" +#~ msgstr "Ausgleich des Filamentflusses" + +#~ msgctxt "speed_equalize_flow_enabled description" +#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines." +#~ msgstr "Drucken Sie dünnere Linien schneller als normale Linien, so dass die Menge des extrudierten Materials pro Sekunde gleich bleibt. Dünne Teile in Ihrem Modell erfordern möglicherweise einen Liniendruck mit geringerer Linienbreite als in den Einstellungen vorgesehen. Diese Einstellung steuert die Geschwindigkeitsänderungen für diese Linien." + +#~ msgctxt "speed_equalize_flow_max label" +#~ msgid "Maximum Speed for Flow Equalization" +#~ msgstr "Maximale Geschwindigkeit für Flussausgleich" + +#~ msgctxt "speed_equalize_flow_max description" +#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow." +#~ msgstr "Maximale Druckgeschwindigkeit bei der Justierung der Druckgeschwindigkeit zum Ausgleich des Flusses." + #~ msgctxt "machine_start_gcode description" #~ msgid "G-code commands to be executed at the very start - separated by \\n." #~ msgstr "G-Code-Befehle, die zu Beginn ausgeführt werden sollen – getrennt durch \\n." |