diff options
Diffstat (limited to 'resources/i18n/pl_PL/cura.po')
| -rw-r--r-- | resources/i18n/pl_PL/cura.po | 9010 |
1 files changed, 4602 insertions, 4408 deletions
diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po index 13e50c3379..06c7fd647b 100644 --- a/resources/i18n/pl_PL/cura.po +++ b/resources/i18n/pl_PL/cura.po @@ -1,12 +1,12 @@ # Cura -# Copyright (C) 2021 Ultimaker B.V. +# Copyright (C) 2022 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # msgid "" msgstr "" -"Project-Id-Version: Cura 4.13\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-04-13 10:49+0200\n" +"Project-Id-Version: Cura 5.1\n" +"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" +"POT-Creation-Date: 2022-06-21 12:50+0200\n" "PO-Revision-Date: 2021-09-07 08:02+0200\n" "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n" "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n" @@ -18,489 +18,813 @@ msgstr "" "X-Generator: Poedit 3.0\n" "X-Poedit-SourceCharset: UTF-8\n" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12 -msgctxt "@item:inmenu" -msgid "Prepare" -msgstr "Przygotuj" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 +msgctxt "@label" +msgid "Unknown" +msgstr "Nieznany" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14 -msgctxt "@item:inlistbox" -msgid "Cura Profile" -msgstr "Profile Cura" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 +msgctxt "@label" +msgid "The printer(s) below cannot be connected because they are part of a group" +msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15 -msgctxt "@item:inlistbox 'Open' is part of the name of this file format." -msgid "Open Compressed Triangle Mesh" -msgstr "Otwórz skompresowaną siatkę trójkątów" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 +msgctxt "@label" +msgid "Available networked printers" +msgstr "Dostępne drukarki sieciowe" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19 -msgctxt "@item:inlistbox" -msgid "COLLADA Digital Asset Exchange" -msgstr "Cyfrowa wymiana zasobów COLLADA" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:219 +msgctxt "@menuitem" +msgid "Not overridden" +msgstr "Nie zastąpione" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23 -msgctxt "@item:inlistbox" -msgid "glTF Binary" -msgstr "Biblioteka glTF" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 +msgctxt "@label" +msgid "Connected printers" +msgstr "Podłączone drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27 -msgctxt "@item:inlistbox" -msgid "glTF Embedded JSON" -msgstr "Załączony JSON glTF" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 +msgctxt "@label" +msgid "Preset printers" +msgstr "Zdefiniowane drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36 -msgctxt "@item:inlistbox" -msgid "Stanford Triangle Format" -msgstr "Format trójkątów Stanforda" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:143 +#, python-brace-format +msgctxt "@label {0} is the name of a printer that's about to be deleted." +msgid "Are you sure you wish to remove {0}? This cannot be undone!" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40 -msgctxt "@item:inlistbox" -msgid "Compressed COLLADA Digital Asset Exchange" -msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:61 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 +msgctxt "@label" +msgid "Default" +msgstr "Domyślne" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 -msgctxt "@info" -msgid "Could not access update information." -msgstr "Nie można uzyskać dostępu do informacji o aktualizacji." +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:65 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 +msgctxt "@label" +msgid "Visual" +msgstr "Wizualny" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 -#, python-brace-format -msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" -msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:66 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 +msgctxt "@text" +msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." +msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 -#, python-format -msgctxt "@info:title The %s gets replaced with the printer name." -msgid "New %s stable firmware available" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:70 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 +msgctxt "@label" +msgid "Engineering" +msgstr "Inżynieria" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 -msgctxt "@action:button" -msgid "How to update" -msgstr "Jak zaktualizować" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:71 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 +msgctxt "@text" +msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." +msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14 -msgctxt "@item:inmenu" -msgid "Monitor" -msgstr "Monitor" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:75 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 +msgctxt "@label" +msgid "Draft" +msgstr "Szkic" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 -msgctxt "@action:button Preceded by 'Ready to'." -msgid "Save to Removable Drive" -msgstr "Zapisz na dysk wymienny" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:76 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 +msgctxt "@text" +msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." +msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania." + +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:232 +msgctxt "@label" +msgid "Custom Material" +msgstr "Niestandardowy materiał" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:233 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340 +msgctxt "@label" +msgid "Custom" +msgstr "Niestandardowy" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:391 +msgctxt "@label" +msgid "Custom profiles" +msgstr "Profile niestandardowe" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:426 #, python-brace-format msgctxt "@item:inlistbox" -msgid "Save to Removable Drive {0}" -msgstr "Zapisz na dysk wymienny {0}" +msgid "All Supported Types ({0})" +msgstr "Wszystkie Wspierane Typy ({0})" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 -msgctxt "@info:status" -msgid "There are no file formats available to write with!" -msgstr "Nie ma żadnych formatów plików do zapisania!" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:427 +msgctxt "@item:inlistbox" +msgid "All Files (*)" +msgstr "Wszystkie Pliki (*)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97 -#, python-brace-format -msgctxt "@info:progress Don't translate the XML tags <filename>!" -msgid "Saving to Removable Drive <filename>{0}</filename>" -msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>" +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualitySettingsModel.py:182 +msgctxt "@info:status" +msgid "Calculated" +msgstr "Przeliczone" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98 +#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:190 msgctxt "@info:title" -msgid "Saving" -msgstr "Zapisywanie" +msgid "Login failed" +msgstr "Logowanie nie powiodło się" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>" -msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>" +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 +msgctxt "@info:status" +msgid "Finding new location for objects" +msgstr "Znajdowanie nowej lokalizacji obiektów" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127 -#, python-brace-format -msgctxt "@info:status Don't translate the tag {device}!" -msgid "Could not find a file name when trying to write to {device}." -msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}." +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 +msgctxt "@info:title" +msgid "Finding Location" +msgstr "Szukanie Lokalizacji" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 +#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" -msgid "Could not save to removable drive {0}: {1}" -msgstr "Nie można zapisać na wymiennym dysku {0}: {1}" +msgid "Unable to find a location within the build volume for all objects" +msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" -msgid "Error" -msgstr "Błąd" +msgid "Can't Find Location" +msgstr "Nie można Znaleźć Lokalizacji" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150 -#, python-brace-format -msgctxt "@info:status" -msgid "Saved to Removable Drive {0} as {1}" -msgstr "Zapisano na dysk wymienny {0} jako {1}" +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:115 +msgctxt "@info:backup_failed" +msgid "Could not create archive from user data directory: {}" +msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151 +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" -msgid "File Saved" -msgstr "Plik Zapisany" +msgid "Backup" +msgstr "Kopia zapasowa" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 -msgctxt "@action:button" -msgid "Eject" -msgstr "Wyjmij" +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134 +msgctxt "@info:backup_failed" +msgid "Tried to restore a Cura backup without having proper data or meta data." +msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 -#, python-brace-format -msgctxt "@action" -msgid "Eject removable device {0}" -msgstr "Wyjmij urządzenie wymienne {0}" +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:145 +msgctxt "@info:backup_failed" +msgid "Tried to restore a Cura backup that is higher than the current version." +msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:158 +msgctxt "@info:backup_failed" +msgid "The following error occurred while trying to restore a Cura backup:" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100 msgctxt "@info:status" -msgid "Ejected {0}. You can now safely remove the drive." -msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk." +msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." +msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 +#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:103 msgctxt "@info:title" -msgid "Safely Remove Hardware" -msgstr "Bezpiecznie Odłącz Urządzenie" +msgid "Build Volume" +msgstr "Obszar Roboczy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176 -#, python-brace-format -msgctxt "@info:status" -msgid "Failed to eject {0}. Another program may be using the drive." -msgstr "Nie można wysunąć {0}. Inny program może używać dysku." +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107 +msgctxt "@title:window" +msgid "Cura can't start" +msgstr "Cura nie może się uruchomić" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177 -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770 -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217 -msgctxt "@info:title" -msgid "Warning" -msgstr "Ostrzeżenie" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113 +msgctxt "@label crash message" +msgid "" +"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n" +" <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n" +" <p>Backups can be found in the configuration folder.</p>\n" +" <p>Please send us this Crash Report to fix the problem.</p>\n" +" " +msgstr "" +"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n" +" <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n" +" <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n" +" <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n" +" " -#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 -msgctxt "@item:intext" -msgid "Removable Drive" -msgstr "Dysk wymienny" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122 +msgctxt "@action:button" +msgid "Send crash report to Ultimaker" +msgstr "Wyślij raport błędu do Ultimaker" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15 -msgctxt "@item:inlistbox" -msgid "AMF File" -msgstr "Plik AMF" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125 +msgctxt "@action:button" +msgid "Show detailed crash report" +msgstr "Pokaż szczegółowy raport błędu" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28 -msgctxt "@item:inlistbox" -msgid "Ultimaker Format Package" -msgstr "Pakiet Formatu Ultimaker" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129 +msgctxt "@action:button" +msgid "Show configuration folder" +msgstr "Pokaż folder konfiguracyjny" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140 +msgctxt "@action:button" +msgid "Backup and Reset Configuration" +msgstr "Zrób Backup i Zresetuj Konfigurację" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171 +msgctxt "@title:window" +msgid "Crash Report" +msgstr "Raport Błędu" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190 +msgctxt "@label crash message" +msgid "" +"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n" +" <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n" +" " +msgstr "" +"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n" +" <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n" +" " + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198 +msgctxt "@title:groupbox" +msgid "System information" +msgstr "Informacje o systemie" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207 +msgctxt "@label unknown version of Cura" +msgid "Unknown" +msgstr "Nieznany" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228 +msgctxt "@label Cura version number" +msgid "Cura version" +msgstr "Wersja Cura" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229 msgctxt "@label" -msgid "Per Model Settings" -msgstr "Ustawienia każdego modelu osobno" +msgid "Cura language" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15 -msgctxt "@info:tooltip" -msgid "Configure Per Model Settings" -msgstr "Konfiguruj ustawienia każdego modelu z osobna" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230 +msgctxt "@label" +msgid "OS language" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 -msgctxt "@action" -msgid "Update Firmware" -msgstr "Aktualizacja Oprogramowania Sprzętowego" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231 +msgctxt "@label Type of platform" +msgid "Platform" +msgstr "Platforma" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232 +msgctxt "@label" +msgid "Qt version" +msgstr "Wersja Qt" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233 +msgctxt "@label" +msgid "PyQt version" +msgstr "Wersja PyQt" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234 +msgctxt "@label OpenGL version" +msgid "OpenGL" +msgstr "OpenGL" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264 +msgctxt "@label" +msgid "Not yet initialized" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267 #, python-brace-format -msgctxt "@info:status" -msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." -msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}." +msgctxt "@label OpenGL version" +msgid "<li>OpenGL Version: {version}</li>" +msgstr "<li>Wersja OpenGL: {version}</li>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 -msgctxt "@info:title" -msgid "Sending materials to printer" -msgstr "Wysyłanie materiałów do drukarki" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268 +#, python-brace-format +msgctxt "@label OpenGL vendor" +msgid "<li>OpenGL Vendor: {vendor}</li>" +msgstr "<li>Wydawca OpenGL: {vendor}</li>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269 #, python-brace-format -msgctxt "@info:status" -msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." -msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza." +msgctxt "@label OpenGL renderer" +msgid "<li>OpenGL Renderer: {renderer}</li>" +msgstr "<li>OpenGL Renderer: {renderer}</li>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 -msgctxt "@info:title" -msgid "Not a group host" -msgstr "Nie jest gospodarzem grupy" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:304 +msgctxt "@title:groupbox" +msgid "Error traceback" +msgstr "Śledzenie błedu" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 -msgctxt "@action" -msgid "Configure group" -msgstr "Konfiguruj grupę" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:390 +msgctxt "@title:groupbox" +msgid "Logs" +msgstr "Logi" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 -msgctxt "@info:status" -msgid "Sending Print Job" -msgstr "Wysyłanie zadania druku" +#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:418 +msgctxt "@action:button" +msgid "Send report" +msgstr "Wyślij raport" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 -msgctxt "@info:status" -msgid "Uploading print job to printer." -msgstr "Przesyłanie zadania do drukarki." +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:531 +msgctxt "@info:progress" +msgid "Loading machines..." +msgstr "Ładowanie drukarek..." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 -msgctxt "@info:status" -msgid "Print job queue is full. The printer can't accept a new job." +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:538 +msgctxt "@info:progress" +msgid "Setting up preferences..." +msgstr "Ustawianie preferencji..." + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:683 +msgctxt "@info:progress" +msgid "Initializing Active Machine..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 -msgctxt "@info:title" -msgid "Queue Full" +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:823 +msgctxt "@info:progress" +msgid "Initializing machine manager..." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:837 +msgctxt "@info:progress" +msgid "Initializing build volume..." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:905 +msgctxt "@info:progress" +msgid "Setting up scene..." +msgstr "Ustawianie sceny ..." + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:941 +msgctxt "@info:progress" +msgid "Loading interface..." +msgstr "Ładowanie interfejsu ..." + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:946 +msgctxt "@info:progress" +msgid "Initializing engine..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1272 +#, python-format +msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." +msgid "%(width).1f x %(depth).1f x %(height).1f mm" +msgstr "%(width).1f x %(depth).1f x %(height).1f mm" + +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1798 +#, python-brace-format msgctxt "@info:status" -msgid "Please wait until the current job has been sent." -msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane." +msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" +msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1800 +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:217 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189 msgctxt "@info:title" -msgid "Print error" -msgstr "Błąd druku" +msgid "Warning" +msgstr "Ostrzeżenie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1810 +#, python-brace-format msgctxt "@info:status" -msgid "Print job was successfully sent to the printer." -msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki." +msgid "Can't open any other file if G-code is loading. Skipped importing {0}" +msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1812 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:166 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" -msgid "Data Sent" -msgstr "Dane Wysłane" +msgid "Error" +msgstr "Błąd" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" -msgid "" -"Your printer <b>{printer_name}</b> could be connected via cloud.\n" -" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" -msgstr "" +msgid "Multiplying and placing objects" +msgstr "Zwielokrotnienie i umieszczanie przedmiotów" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 +#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" -msgid "Are you ready for cloud printing?" +msgid "Placing Objects" +msgstr "Umieść Obiekty" + +#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:100 +msgctxt "@info:title" +msgid "Placing Object" +msgstr "Rozmieszczenie Obiektów" + +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:89 +msgctxt "@message" +msgid "Could not read response." +msgstr "Nie można odczytać odpowiedzi." + +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75 +msgctxt "@message" +msgid "The provided state is not correct." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 -msgctxt "@action" -msgid "Get started" -msgstr "Rozpocznij" +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80 +msgctxt "@message" +msgid "Timeout when authenticating with the account server." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 -msgctxt "@action" -msgid "Learn more" +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97 +msgctxt "@message" +msgid "Please give the required permissions when authorizing this application." +msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji." + +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104 +msgctxt "@message" +msgid "Something unexpected happened when trying to log in, please try again." +msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie." + +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:216 +msgctxt "@info" +msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 -msgctxt "@info:status" -msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." -msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware." +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:277 +msgctxt "@info" +msgid "Unable to reach the Ultimaker account server." +msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 +#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" -msgid "Update your printer" -msgstr "Zaktualizuj swoją drukarkę" +msgid "Log-in failed" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 -msgctxt "@info:text" -msgid "Could not upload the data to the printer." -msgstr "Nie można wgrać danych do drukarki." +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104 +msgctxt "@text:error" +msgid "Failed to create archive of materials to sync with printers." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 -msgctxt "@info:title" -msgid "Network error" -msgstr "Błąd sieci" +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165 +msgctxt "@text:error" +msgid "Failed to load the archive of materials to sync it with printers." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 -msgctxt "@action:button Preceded by 'Ready to'." -msgid "Print over network" -msgstr "Drukuj przez sieć" +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143 +msgctxt "@text:error" +msgid "The response from Digital Factory appears to be corrupted." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 -msgctxt "@properties:tooltip" -msgid "Print over network" -msgstr "Drukuj przez sieć" +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155 +msgctxt "@text:error" +msgid "The response from Digital Factory is missing important information." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 -msgctxt "@info:status" -msgid "Connected over the network" -msgstr "Połączone przez sieć" +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218 +msgctxt "@text:error" +msgid "Failed to connect to Digital Factory to sync materials with some of the printers." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 -msgctxt "@info:status" -msgid "tomorrow" -msgstr "jutro" +#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232 +msgctxt "@text:error" +msgid "Failed to connect to Digital Factory." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:207 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140 +msgctxt "@title:window" +msgid "File Already Exists" +msgstr "Plik już istnieje" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:208 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141 +#, python-brace-format +msgctxt "@label Don't translate the XML tag <filename>!" +msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?" +msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:459 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:462 msgctxt "@info:status" -msgid "today" -msgstr "dziś" +msgid "Invalid file URL:" +msgstr "Nieprawidłowy adres URL pliku:" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 -msgctxt "@action" -msgid "Connect via Network" -msgstr "Połącz przez sieć" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>" +msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229 -msgctxt "info:status" -msgid "New printer detected from your Ultimaker account" -msgid_plural "New printers detected from your Ultimaker account" -msgstr[0] "" -msgstr[1] "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:163 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure." +msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format -msgctxt "info:status Filled in with printer name and printer model." -msgid "Adding printer {name} ({model}) from your account" -msgstr "" +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Exported profile to <filename>{0}</filename>" +msgstr "Wyeksportowano profil do <filename>{0}</filename>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:173 +msgctxt "@info:title" +msgid "Export succeeded" +msgstr "Eksport udany" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format -msgctxt "info:{0} gets replaced by a number of printers" -msgid "... and {0} other" -msgid_plural "... and {0} others" -msgstr[0] "" -msgstr[1] "" +msgctxt "@info:status Don't translate the XML tags <filename>!" +msgid "Failed to import profile from <filename>{0}</filename>: {1}" +msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262 -msgctxt "info:status" -msgid "Printers added from Digital Factory:" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:209 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename>!" +msgid "Can't import profile from <filename>{0}</filename> before a printer is added." +msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328 -msgctxt "info:status" -msgid "A cloud connection is not available for a printer" -msgid_plural "A cloud connection is not available for some printers" -msgstr[0] "" -msgstr[1] "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:224 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename>!" +msgid "No custom profile to import in file <filename>{0}</filename>" +msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 -msgctxt "info:status" -msgid "This printer is not linked to the Digital Factory:" -msgid_plural "These printers are not linked to the Digital Factory:" -msgstr[0] "" -msgstr[1] "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename>!" +msgid "Failed to import profile from <filename>{0}</filename>:" +msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432 -msgctxt "info:name" -msgid "Ultimaker Digital Factory" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:252 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:262 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename>!" +msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it." +msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format -msgctxt "info:status" -msgid "To establish a connection, please visit the {website_link}" -msgstr "" +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Failed to import profile from <filename>{0}</filename>:" +msgstr "Błąd importu profilu z <filename>{0}</filename>:" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350 -msgctxt "@action:button" -msgid "Keep printer configurations" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359 +#, python-brace-format +msgctxt "@info:status" +msgid "Successfully imported profile {0}." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355 -msgctxt "@action:button" -msgid "Remove printers" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:366 +#, python-brace-format +msgctxt "@info:status" +msgid "File {0} does not contain any valid profile." +msgstr "Plik {0} nie zawiera żadnego poprawnego profilu." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format -msgctxt "@message {printer_name} is replaced with the name of the printer" -msgid "{printer_name} will be removed until the next account sync." +msgctxt "@info:status" +msgid "Profile {0} has an unknown file type or is corrupted." +msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony." + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443 +msgctxt "@label" +msgid "Custom profile" +msgstr "Niestandardowy profil" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:459 +msgctxt "@info:status" +msgid "Profile is missing a quality type." +msgstr "Profilowi brakuje typu jakości." + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463 +msgctxt "@info:status" +msgid "There is no active printer yet." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:469 +msgctxt "@info:status" +msgid "Unable to add the profile." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format -msgctxt "@message {printer_name} is replaced with the name of the printer" -msgid "To remove {printer_name} permanently, visit {digital_factory_link}" +msgctxt "@info:status" +msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format -msgctxt "@message {printer_name} is replaced with the name of the printer" -msgid "Are you sure you want to remove {printer_name} temporarily?" +msgctxt "@info:status" +msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473 -msgctxt "@title:window" -msgid "Remove printers?" +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36 +msgctxt "@info:not supported profile" +msgid "Not supported" +msgstr "Niewspierany" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55 +msgctxt "@info:No intent profile selected" +msgid "Default" +msgstr "Domyślne" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:219 +msgctxt "@label" +msgid "Nozzle" +msgstr "Dysza" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:857 +msgctxt "@info:message Followed by a list of settings." +msgid "Settings have been changed to match the current availability of extruders:" +msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:858 +msgctxt "@info:title" +msgid "Settings updated" +msgstr "Ustawienia zostały zaaktualizowane" + +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1480 +msgctxt "@info:title" +msgid "Extruder(s) Disabled" +msgstr "Ekstruder(y) wyłączony(/e)" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 +msgctxt "@action:button" +msgid "Add" +msgstr "Dodaj" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:290 +msgctxt "@action:button" +msgid "Finish" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:508 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:323 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:147 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:139 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:291 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:74 +msgctxt "@action:button" +msgid "Cancel" +msgstr "Anuluj" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" -msgid "" -"You are about to remove {0} printer from Cura. This action cannot be undone.\n" -"Are you sure you want to continue?" -msgid_plural "" -"You are about to remove {0} printers from Cura. This action cannot be undone.\n" -"Are you sure you want to continue?" -msgstr[0] "" -msgstr[1] "" +msgid "Group #{group_nr}" +msgstr "Grupa #{group_nr}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481 -msgctxt "@label" -msgid "" -"You are about to remove all printers from Cura. This action cannot be undone.\n" -"Are you sure you want to continue?" +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85 +msgctxt "@tooltip" +msgid "Outer Wall" +msgstr "Zewnętrzna ściana" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86 +msgctxt "@tooltip" +msgid "Inner Walls" +msgstr "Ściany wewnętrzne" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87 +msgctxt "@tooltip" +msgid "Skin" +msgstr "Skin" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88 +msgctxt "@tooltip" +msgid "Infill" +msgstr "Wypełnienie" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89 +msgctxt "@tooltip" +msgid "Support Infill" +msgstr "Wypełnienie podpór" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90 +msgctxt "@tooltip" +msgid "Support Interface" +msgstr "Łączenie podpory" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91 +msgctxt "@tooltip" +msgid "Support" +msgstr "Podpory" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92 +msgctxt "@tooltip" +msgid "Skirt" +msgstr "Obwódka" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93 +msgctxt "@tooltip" +msgid "Prime Tower" +msgstr "Wieża czyszcząca" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94 +msgctxt "@tooltip" +msgid "Travel" +msgstr "Ruch jałowy" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:95 +msgctxt "@tooltip" +msgid "Retractions" +msgstr "Retrakcja" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:96 +msgctxt "@tooltip" +msgid "Other" +msgstr "Inny" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:63 +msgctxt "@text:window" +msgid "The release notes could not be opened." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:57 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" -msgid "Print via cloud" +msgid "Next" +msgstr "Następny" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:286 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:67 +msgctxt "@action:button" +msgid "Skip" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155 -msgctxt "@properties:tooltip" -msgid "Print via cloud" +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:72 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:443 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:186 +msgctxt "@action:button" +msgid "Close" +msgstr "Zamknij" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 +msgctxt "@action:button" +msgid "Please sync the material profiles with your printers before starting to print." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156 -msgctxt "@info:status" -msgid "Connected via cloud" +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 +msgctxt "@action:button" +msgid "New materials installed" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" -msgid "Monitor print" +msgid "Sync materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 -msgctxt "@action:tooltip" -msgid "Track the print in Ultimaker Digital Factory" +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:397 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:80 +msgctxt "@action:button" +msgid "Learn more" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 -#, python-brace-format -msgctxt "@error:send" -msgid "Unknown error code when uploading print job: {0}" +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135 +msgctxt "@message:text" +msgid "Could not save material archive to {}:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31 +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136 +msgctxt "@message:title" +msgid "Failed to save material archive" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188 +msgctxt "@text" +msgid "Unknown error." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "Asystent Modelu 3D" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" @@ -514,156 +838,229 @@ msgstr "" "<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n" "<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129 -msgctxt "@info:status" -msgid "Cura does not accurately display layers when Wire Printing is enabled." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead." +msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:548 msgctxt "@info:title" -msgid "Simulation View" -msgstr "Widok symulacji" +msgid "Open Project File" +msgstr "Otwórz Plik Projektu" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133 -msgctxt "@info:status" -msgid "Nothing is shown because you need to slice first." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:659 msgctxt "@info:title" -msgid "No layers to show" +msgid "Can't Open Project File" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74 -msgctxt "@info:option_text" -msgid "Do not show this message again" -msgstr "Nie pokazuj tego komunikatu ponownie" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:658 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15 -msgctxt "@item:inlistbox" -msgid "Layer view" -msgstr "Widok warstwy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:711 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tag <filename>!" +msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74 -msgctxt "@error:not supported" -msgid "GCodeWriter does not support non-text mode." -msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:212 +msgctxt "@title:tab" +msgid "Recommended" +msgstr "Zalecane" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96 -msgctxt "@warning:status" -msgid "Please prepare G-code before exporting." -msgstr "Przygotuj G-code przed eksportem." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:214 +msgctxt "@title:tab" +msgid "Custom" +msgstr "Niestandardowe" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14 -msgctxt "@item:inlistbox" -msgid "G-code File" -msgstr "Pliki G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:390 +msgctxt "@info:status" +msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226 -msgctxt "@error:zip" -msgid "Error writing 3mf file." -msgstr "Błąd zapisu pliku 3mf." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:392 +msgctxt "@info:title" +msgid "Material profiles not installed" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:405 +msgctxt "@action:button" +msgid "Install Materials" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 +msgctxt "@item:inlistbox" +msgid "3MF File" +msgstr "Plik 3MF" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:238 +msgctxt "@error:zip" +msgid "Error writing 3mf file." +msgstr "Błąd zapisu pliku 3mf." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:282 +#, python-brace-format +msgctxt "@error:material" +msgid "It was not possible to store material package information in project file: {material}. This project may not open correctly on other systems." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:283 +msgctxt "@info:title" +msgid "Failed to save material package information" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "Plik 3MF" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:36 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Plik Cura Project 3MF" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17 +#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" -msgid "Compressed G-code File" -msgstr "Skompresowany Plik G-code" +msgid "AMF File" +msgstr "Plik AMF" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25 +msgctxt "@info:title" +msgid "Backups" +msgstr "Kopie zapasowe" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 +msgctxt "@info:backup_status" +msgid "There was an error while uploading your backup." +msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46 +msgctxt "@info:backup_status" +msgid "Creating your backup..." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55 +msgctxt "@info:backup_status" +msgid "There was an error while creating your backup." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59 +msgctxt "@info:backup_status" +msgid "Uploading your backup..." +msgstr "Wgrywanie kopii zapasowej..." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69 +msgctxt "@info:backup_status" +msgid "Your backup has finished uploading." +msgstr "Wgrywanie kopii zapasowej zakończone." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103 +msgctxt "@error:file_size" +msgid "The backup exceeds the maximum file size." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 +msgctxt "@info:backup_status" +msgid "There was an error trying to restore your backup." +msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69 +msgctxt "@item:inmenu" +msgid "Manage backups" +msgstr "Zarządzaj kopiami zapasowymi" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:button" msgid "Report a bug" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:400 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:401 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:434 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:461 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:473 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:485 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:498 msgctxt "@info:title" msgid "Unable to slice" msgstr "Nie można pociąć" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:433 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:460 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:472 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:484 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:494 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" @@ -672,4944 +1069,4701 @@ msgid "" "- Are not all set as modifier meshes" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Przetwarzanie warstw" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Informacja" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" -msgid "X3D File" -msgstr "X3D Plik" +msgid "Cura Profile" +msgstr "Profile Cura" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 +msgctxt "@info" +msgid "Could not access update information." +msgstr "Nie można uzyskać dostępu do informacji o aktualizacji." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 +#, python-brace-format +msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" +msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 +#, python-format +msgctxt "@info:title The %s gets replaced with the printer name." +msgid "New %s stable firmware available" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 +msgctxt "@action:button" +msgid "How to update" +msgstr "Jak zaktualizować" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 +msgctxt "@action" +msgid "Update Firmware" +msgstr "Aktualizacja Oprogramowania Sprzętowego" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 +msgctxt "@item:inlistbox" +msgid "Compressed G-code File" +msgstr "Skompresowany Plik G-code" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 +msgctxt "@error:not supported" +msgid "GCodeGzWriter does not support text mode." +msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 +msgctxt "@item:inlistbox" +msgid "G-code File" +msgstr "Pliki G-code" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:350 +msgctxt "@info:status" +msgid "Parsing G-code" +msgstr "Analizowanie G-code" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:352 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:506 +msgctxt "@info:title" +msgid "G-code Details" +msgstr "Szczegóły G-code" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:504 +msgctxt "@info:generic" +msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." +msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18 +msgctxt "@item:inlistbox" +msgid "G File" +msgstr "Plik G-code" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74 +msgctxt "@error:not supported" +msgid "GCodeWriter does not support non-text mode." +msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 +msgctxt "@warning:status" +msgid "Please prepare G-code before exporting." +msgstr "Przygotuj G-code przed eksportem." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "Obraz JPG" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "Obraz JPEG" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "Obraz PNG" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "Obraz BMP" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "Obraz GIF" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713 -msgctxt "@label" -msgid "Nozzle" -msgstr "Dysza" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead." -msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547 -msgctxt "@info:title" -msgid "Open Project File" -msgstr "Otwórz Plik Projektu" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644 -#, python-brace-format -msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" -msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>." -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653 -msgctxt "@info:title" -msgid "Can't Open Project File" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652 -#, python-brace-format -msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" -msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>." -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705 -#, python-brace-format -msgctxt "@info:error Don't translate the XML tag <filename>!" -msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura." -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203 -msgctxt "@title:tab" -msgid "Recommended" -msgstr "Zalecane" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205 -msgctxt "@title:tab" -msgid "Custom" -msgstr "Niestandardowe" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33 -msgctxt "@item:inlistbox" -msgid "3MF File" -msgstr "Plik 3MF" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159 -msgctxt "@info:error" -msgid "Can't write to UFP file:" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Profile Cura 15.04" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25 -msgctxt "@info:title" -msgid "Backups" -msgstr "Kopie zapasowe" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 -msgctxt "@info:backup_status" -msgid "There was an error while uploading your backup." -msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej." +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 +msgctxt "@action" +msgid "Machine Settings" +msgstr "Ustawienia drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46 -msgctxt "@info:backup_status" -msgid "Creating your backup..." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:144 +msgctxt "@info:generic" +msgid "Do you want to sync material and software packages with your account?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55 -msgctxt "@info:backup_status" -msgid "There was an error while creating your backup." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:145 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:95 +msgctxt "@info:title" +msgid "Changes detected from your Ultimaker account" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59 -msgctxt "@info:backup_status" -msgid "Uploading your backup..." -msgstr "Wgrywanie kopii zapasowej..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69 -msgctxt "@info:backup_status" -msgid "Your backup has finished uploading." -msgstr "Wgrywanie kopii zapasowej zakończone." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103 -msgctxt "@error:file_size" -msgid "The backup exceeds the maximum file size." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:147 +msgctxt "@action:button" +msgid "Sync" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69 -msgctxt "@item:inmenu" -msgid "Manage backups" -msgstr "Zarządzaj kopiami zapasowymi" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159 -msgctxt "@info:title" -msgid "Backup" -msgstr "Kopia zapasowa" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 -msgctxt "@info:backup_status" -msgid "There was an error trying to restore your backup." -msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 -msgctxt "@text" -msgid "Unable to read example data file." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:91 +msgctxt "@info:generic" +msgid "Syncing..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 -msgctxt "@error:not supported" -msgid "GCodeGzWriter does not support text mode." -msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 -msgctxt "@item:inmenu" -msgid "Post Processing" -msgstr "Przetwarzanie końcowe" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 -msgctxt "@item:inmenu" -msgid "Modify G-Code" -msgstr "Modyfikuj G-code" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12 -msgctxt "@label" -msgid "Support Blocker" -msgstr "Blokada Podpory" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13 -msgctxt "@info:tooltip" -msgid "Create a volume in which supports are not printed." -msgstr "Stwórz obszar, w którym podpory nie będą drukowane." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13 -msgctxt "@item:inmenu" -msgid "Preview" -msgstr "Podgląd" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12 -msgctxt "@item:inlistbox" -msgid "X-Ray view" -msgstr "Widok X-Ray" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 -msgctxt "@action" -msgid "Level build plate" -msgstr "Wypoziomuj stół" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:12 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:79 +msgctxt "@button" +msgid "Decline" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 -msgctxt "@action" -msgid "Select upgrades" -msgstr "Wybierz aktualizacje" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:13 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53 +msgctxt "@button" +msgid "Agree" +msgstr "Zgadzam się" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43 -msgctxt "@label:property" -msgid "Unknown Package" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:77 +msgctxt "@title:window" +msgid "Plugin License Agreement" +msgstr "Akceptowanie Licencji Wtyczki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66 -msgctxt "@label:property" -msgid "Unknown Author" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicensePresenter.py:42 +msgctxt "@button" +msgid "Decline and remove from account" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116 -msgctxt "@info:error" -msgid "Could not interpret the server's response." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22 +msgctxt "@info:generic" +msgid "You need to quit and restart {} before changes have effect." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146 -msgctxt "@info:error" -msgid "Could not reach Marketplace." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/SyncOrchestrator.py:79 +msgctxt "@info:generic" +msgid "{} plugins failed to download" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71 -msgctxt "@info:status" -msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:43 +msgctxt "@label:property" +msgid "Unknown Package" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73 -msgctxt "@info:title" -msgid "Model Errors" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:66 +msgctxt "@label:property" +msgid "Unknown Author" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 -msgctxt "@action:button" -msgid "Learn more" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:117 +msgctxt "@info:error" +msgid "Could not interpret the server's response." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:148 +msgctxt "@info:error" +msgid "Could not reach Marketplace." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" -msgid "Solid view" -msgstr "Widok modelu" +msgid "Monitor" +msgstr "Monitor" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350 -msgctxt "@info:status" -msgid "Parsing G-code" -msgstr "Analizowanie G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 +msgctxt "@label" +msgid "Per Model Settings" +msgstr "Ustawienia każdego modelu osobno" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506 -msgctxt "@info:title" -msgid "G-code Details" -msgstr "Szczegóły G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15 +msgctxt "@info:tooltip" +msgid "Configure Per Model Settings" +msgstr "Konfiguruj ustawienia każdego modelu z osobna" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504 -msgctxt "@info:generic" -msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." -msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne." +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 +msgctxt "@item:inmenu" +msgid "Post Processing" +msgstr "Przetwarzanie końcowe" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18 -msgctxt "@item:inlistbox" -msgid "G File" -msgstr "Plik G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 +msgctxt "@item:inmenu" +msgid "Modify G-Code" +msgstr "Modyfikuj G-code" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 -msgctxt "@action" -msgid "Machine Settings" -msgstr "Ustawienia drukarki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12 +msgctxt "@item:inmenu" +msgid "Prepare" +msgstr "Przygotuj" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" -msgid "USB printing" -msgstr "Drukowanie USB" +msgid "Preview" +msgstr "Podgląd" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." -msgid "Print via USB" -msgstr "Drukuj przez USB" +msgid "Save to Removable Drive" +msgstr "Zapisz na dysk wymienny" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 -msgctxt "@info:tooltip" -msgid "Print via USB" -msgstr "Drukuj przez USB" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 +#, python-brace-format +msgctxt "@item:inlistbox" +msgid "Save to Removable Drive {0}" +msgstr "Zapisz na dysk wymienny {0}" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" -msgid "Connected via USB" -msgstr "Połączono przez USB" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 -msgctxt "@label" -msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" -msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135 -msgctxt "@message" -msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." -msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136 -msgctxt "@message" -msgid "Print in Progress" -msgstr "Drukowanie w toku" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529 -msgctxt "@info:progress" -msgid "Loading machines..." -msgstr "Ładowanie drukarek..." +msgid "There are no file formats available to write with!" +msgstr "Nie ma żadnych formatów plików do zapisania!" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536 -msgctxt "@info:progress" -msgid "Setting up preferences..." -msgstr "Ustawianie preferencji..." +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 +#, python-brace-format +msgctxt "@info:progress Don't translate the XML tags <filename>!" +msgid "Saving to Removable Drive <filename>{0}</filename>" +msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678 -msgctxt "@info:progress" -msgid "Initializing Active Machine..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110 +msgctxt "@info:title" +msgid "Saving" +msgstr "Zapisywanie" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802 -msgctxt "@info:progress" -msgid "Initializing machine manager..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>" +msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816 -msgctxt "@info:progress" -msgid "Initializing build volume..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 +#, python-brace-format +msgctxt "@info:status Don't translate the tag {device}!" +msgid "Could not find a file name when trying to write to {device}." +msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}." -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884 -msgctxt "@info:progress" -msgid "Setting up scene..." -msgstr "Ustawianie sceny ..." +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171 +#, python-brace-format +msgctxt "@info:status" +msgid "Could not save to removable drive {0}: {1}" +msgstr "Nie można zapisać na wymiennym dysku {0}: {1}" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920 -msgctxt "@info:progress" -msgid "Loading interface..." -msgstr "Ładowanie interfejsu ..." +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162 +#, python-brace-format +msgctxt "@info:status" +msgid "Saved to Removable Drive {0} as {1}" +msgstr "Zapisano na dysk wymienny {0} jako {1}" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925 -msgctxt "@info:progress" -msgid "Initializing engine..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 +msgctxt "@info:title" +msgid "File Saved" +msgstr "Plik Zapisany" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242 -#, python-format -msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." -msgid "%(width).1f x %(depth).1f x %(height).1f mm" -msgstr "%(width).1f x %(depth).1f x %(height).1f mm" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 +msgctxt "@action:button" +msgid "Eject" +msgstr "Wyjmij" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format -msgctxt "@info:status" -msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" -msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}" +msgctxt "@action" +msgid "Eject removable device {0}" +msgstr "Wyjmij urządzenie wymienne {0}" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184 #, python-brace-format msgctxt "@info:status" -msgid "Can't open any other file if G-code is loading. Skipped importing {0}" -msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11 -msgctxt "@label" -msgid "Default" -msgstr "Domyślne" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14 -msgctxt "@label" -msgid "Visual" -msgstr "Wizualny" +msgid "Ejected {0}. You can now safely remove the drive." +msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15 -msgctxt "@text" -msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." -msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni." +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185 +msgctxt "@info:title" +msgid "Safely Remove Hardware" +msgstr "Bezpiecznie Odłącz Urządzenie" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18 -msgctxt "@label" -msgid "Engineering" -msgstr "Inżynieria" +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188 +#, python-brace-format +msgctxt "@info:status" +msgid "Failed to eject {0}. Another program may be using the drive." +msgstr "Nie można wysunąć {0}. Inny program może używać dysku." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19 -msgctxt "@text" -msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." -msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję." +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 +msgctxt "@item:intext" +msgid "Removable Drive" +msgstr "Dysk wymienny" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22 -msgctxt "@label" -msgid "Draft" -msgstr "Szkic" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:129 +msgctxt "@info:status" +msgid "Cura does not accurately display layers when Wire Printing is enabled." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23 -msgctxt "@text" -msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." -msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania." +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:130 +msgctxt "@info:title" +msgid "Simulation View" +msgstr "Widok symulacji" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219 -msgctxt "@menuitem" -msgid "Not overridden" -msgstr "Nie zastąpione" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:133 +msgctxt "@info:status" +msgid "Nothing is shown because you need to slice first." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143 -#, python-brace-format -msgctxt "@label {0} is the name of a printer that's about to be deleted." -msgid "Are you sure you wish to remove {0}? This cannot be undone!" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:134 +msgctxt "@info:title" +msgid "No layers to show" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614 -msgctxt "@label" -msgid "Unknown" -msgstr "Nieznany" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 +msgctxt "@info:option_text" +msgid "Do not show this message again" +msgstr "Nie pokazuj tego komunikatu ponownie" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 -msgctxt "@label" -msgid "The printer(s) below cannot be connected because they are part of a group" -msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15 +msgctxt "@item:inlistbox" +msgid "Layer view" +msgstr "Widok warstwy" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 -msgctxt "@label" -msgid "Available networked printers" -msgstr "Dostępne drukarki sieciowe" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 +msgctxt "@text" +msgid "Unable to read example data file." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" -msgid "Calculated" -msgstr "Przeliczone" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 -msgctxt "@action:button" -msgid "Please sync the material profiles with your printers before starting to print." +msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 -msgctxt "@action:button" -msgid "New materials installed" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73 +msgctxt "@info:title" +msgid "Model Errors" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 -msgctxt "@action:button" -msgid "Sync materials" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12 +msgctxt "@item:inmenu" +msgid "Solid view" +msgstr "Widok modelu" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" -msgid "Custom Material" -msgstr "Niestandardowy materiał" +msgid "Support Blocker" +msgstr "Blokada Podpory" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336 -msgctxt "@label" -msgid "Custom" -msgstr "Niestandardowy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13 +msgctxt "@info:tooltip" +msgid "Create a volume in which supports are not printed." +msgstr "Stwórz obszar, w którym podpory nie będą drukowane." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390 -msgctxt "@label" -msgid "Custom profiles" -msgstr "Profile niestandardowe" +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15 +msgctxt "@item:inlistbox 'Open' is part of the name of this file format." +msgid "Open Compressed Triangle Mesh" +msgstr "Otwórz skompresowaną siatkę trójkątów" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" -msgid "All Supported Types ({0})" -msgstr "Wszystkie Wspierane Typy ({0})" +msgid "COLLADA Digital Asset Exchange" +msgstr "Cyfrowa wymiana zasobów COLLADA" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426 +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" -msgid "All Files (*)" -msgstr "Wszystkie Pliki (*)" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104 -msgctxt "@text:error" -msgid "Failed to create archive of materials to sync with printers." -msgstr "" +msgid "glTF Binary" +msgstr "Biblioteka glTF" -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165 -msgctxt "@text:error" -msgid "Failed to load the archive of materials to sync it with printers." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27 +msgctxt "@item:inlistbox" +msgid "glTF Embedded JSON" +msgstr "Załączony JSON glTF" -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143 -msgctxt "@text:error" -msgid "The response from Digital Factory appears to be corrupted." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36 +msgctxt "@item:inlistbox" +msgid "Stanford Triangle Format" +msgstr "Format trójkątów Stanforda" -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155 -msgctxt "@text:error" -msgid "The response from Digital Factory is missing important information." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40 +msgctxt "@item:inlistbox" +msgid "Compressed COLLADA Digital Asset Exchange" +msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA" -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218 -msgctxt "@text:error" -msgid "Failed to connect to Digital Factory to sync materials with some of the printers." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 +msgctxt "@item:inlistbox" +msgid "Ultimaker Format Package" +msgstr "Pakiet Formatu Ultimaker" -#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232 -msgctxt "@text:error" -msgid "Failed to connect to Digital Factory." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159 +msgctxt "@info:error" +msgid "Can't write to UFP file:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115 -msgctxt "@info:backup_failed" -msgid "Could not create archive from user data directory: {}" -msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134 -msgctxt "@info:backup_failed" -msgid "Tried to restore a Cura backup without having proper data or meta data." -msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 +msgctxt "@action" +msgid "Level build plate" +msgstr "Wypoziomuj stół" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145 -msgctxt "@info:backup_failed" -msgid "Tried to restore a Cura backup that is higher than the current version." -msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 +msgctxt "@action" +msgid "Select upgrades" +msgstr "Wybierz aktualizacje" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158 -msgctxt "@info:backup_failed" -msgid "The following error occurred while trying to restore a Cura backup:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 +msgctxt "@action:button" +msgid "Print via cloud" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24 -msgctxt "@info:status" -msgid "Finding new location for objects" -msgstr "Znajdowanie nowej lokalizacji obiektów" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28 -msgctxt "@info:title" -msgid "Finding Location" -msgstr "Szukanie Lokalizacji" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155 +msgctxt "@properties:tooltip" +msgid "Print via cloud" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41 -#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156 msgctxt "@info:status" -msgid "Unable to find a location within the build volume for all objects" -msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42 -msgctxt "@info:title" -msgid "Can't Find Location" -msgstr "Nie można Znaleźć Lokalizacji" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190 -msgctxt "@info:title" -msgid "Login failed" -msgstr "Logowanie nie powiodło się" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85 -msgctxt "@tooltip" -msgid "Outer Wall" -msgstr "Zewnętrzna ściana" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86 -msgctxt "@tooltip" -msgid "Inner Walls" -msgstr "Ściany wewnętrzne" +msgid "Connected via cloud" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87 -msgctxt "@tooltip" -msgid "Skin" -msgstr "Skin" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 +msgctxt "@action:button" +msgid "Monitor print" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88 -msgctxt "@tooltip" -msgid "Infill" -msgstr "Wypełnienie" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 +msgctxt "@action:tooltip" +msgid "Track the print in Ultimaker Digital Factory" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89 -msgctxt "@tooltip" -msgid "Support Infill" -msgstr "Wypełnienie podpór" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 +#, python-brace-format +msgctxt "@error:send" +msgid "Unknown error code when uploading print job: {0}" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90 -msgctxt "@tooltip" -msgid "Support Interface" -msgstr "Łączenie podpory" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229 +msgctxt "info:status" +msgid "New printer detected from your Ultimaker account" +msgid_plural "New printers detected from your Ultimaker account" +msgstr[0] "" +msgstr[1] "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91 -msgctxt "@tooltip" -msgid "Support" -msgstr "Podpory" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:242 +#, python-brace-format +msgctxt "info:status Filled in with printer name and printer model." +msgid "Adding printer {name} ({model}) from your account" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92 -msgctxt "@tooltip" -msgid "Skirt" -msgstr "Obwódka" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:261 +#, python-brace-format +msgctxt "info:{0} gets replaced by a number of printers" +msgid "... and {0} other" +msgid_plural "... and {0} others" +msgstr[0] "" +msgstr[1] "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93 -msgctxt "@tooltip" -msgid "Prime Tower" -msgstr "Wieża czyszcząca" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:266 +msgctxt "info:status" +msgid "Printers added from Digital Factory:" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94 -msgctxt "@tooltip" -msgid "Travel" -msgstr "Ruch jałowy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:334 +msgctxt "info:status" +msgid "A cloud connection is not available for a printer" +msgid_plural "A cloud connection is not available for some printers" +msgstr[0] "" +msgstr[1] "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95 -msgctxt "@tooltip" -msgid "Retractions" -msgstr "Retrakcja" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:343 +msgctxt "info:status" +msgid "This printer is not linked to the Digital Factory:" +msgid_plural "These printers are not linked to the Digital Factory:" +msgstr[0] "" +msgstr[1] "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96 -msgctxt "@tooltip" -msgid "Other" -msgstr "Inny" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:348 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:440 +msgctxt "info:name" +msgid "Ultimaker Digital Factory" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:352 #, python-brace-format -msgctxt "@label" -msgid "Group #{group_nr}" -msgstr "Grupa #{group_nr}" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63 -msgctxt "@text:window" -msgid "The release notes could not be opened." +msgctxt "info:status" +msgid "To establish a connection, please visit the {website_link}" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:356 msgctxt "@action:button" -msgid "Skip" +msgid "Keep printer configurations" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172 -msgctxt "@action:button" -msgid "Close" -msgstr "Zamknij" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 -msgctxt "@action:button" -msgid "Add" -msgstr "Dodaj" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:361 msgctxt "@action:button" -msgid "Finish" +msgid "Remove printers" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136 -msgctxt "@action:button" -msgid "Cancel" -msgstr "Anuluj" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57 -#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277 -msgctxt "@action:button" -msgid "Next" -msgstr "Następny" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100 -msgctxt "@info:status" -msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." -msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami." - -#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103 -msgctxt "@info:title" -msgid "Build Volume" -msgstr "Obszar Roboczy" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135 -msgctxt "@message:text" -msgid "Could not save material archive to {}:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:442 +#, python-brace-format +msgctxt "@message {printer_name} is replaced with the name of the printer" +msgid "{printer_name} will be removed until the next account sync." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136 -msgctxt "@message:title" -msgid "Failed to save material archive" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:443 +#, python-brace-format +msgctxt "@message {printer_name} is replaced with the name of the printer" +msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188 -msgctxt "@text" -msgid "Unknown error." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:444 +#, python-brace-format +msgctxt "@message {printer_name} is replaced with the name of the printer" +msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481 msgctxt "@title:window" -msgid "File Already Exists" -msgstr "Plik już istnieje" +msgid "Remove printers?" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484 #, python-brace-format -msgctxt "@label Don't translate the XML tag <filename>!" -msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?" -msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?" +msgctxt "@label" +msgid "" +"You are about to remove {0} printer from Cura. This action cannot be undone.\n" +"Are you sure you want to continue?" +msgid_plural "" +"You are about to remove {0} printers from Cura. This action cannot be undone.\n" +"Are you sure you want to continue?" +msgstr[0] "" +msgstr[1] "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:489 +msgctxt "@label" +msgid "" +"You are about to remove all printers from Cura. This action cannot be undone.\n" +"Are you sure you want to continue?" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 +#, python-brace-format msgctxt "@info:status" -msgid "Invalid file URL:" -msgstr "Nieprawidłowy adres URL pliku:" +msgid "" +"Your printer <b>{printer_name}</b> could be connected via cloud.\n" +" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36 -msgctxt "@info:not supported profile" -msgid "Not supported" -msgstr "Niewspierany" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 +msgctxt "@info:title" +msgid "Are you ready for cloud printing?" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55 -msgctxt "@info:No intent profile selected" -msgid "Default" -msgstr "Domyślne" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 +msgctxt "@action" +msgid "Get started" +msgstr "Rozpocznij" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857 -msgctxt "@info:message Followed by a list of settings." -msgid "Settings have been changed to match the current availability of extruders:" -msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 +msgctxt "@action" +msgid "Learn more" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858 -msgctxt "@info:title" -msgid "Settings updated" -msgstr "Ustawienia zostały zaaktualizowane" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 +msgctxt "@info:status" +msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." +msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" -msgid "Extruder(s) Disabled" -msgstr "Ekstruder(y) wyłączony(/e)" +msgid "Update your printer" +msgstr "Zaktualizuj swoją drukarkę" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>" -msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>" +msgctxt "@info:status" +msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." +msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure." -msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 +msgctxt "@info:title" +msgid "Sending materials to printer" +msgstr "Wysyłanie materiałów do drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Exported profile to <filename>{0}</filename>" -msgstr "Wyeksportowano profil do <filename>{0}</filename>" +msgctxt "@info:status" +msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." +msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" -msgid "Export succeeded" -msgstr "Eksport udany" - -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename>!" -msgid "Failed to import profile from <filename>{0}</filename>: {1}" -msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}" +msgid "Not a group host" +msgstr "Nie jest gospodarzem grupy" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename>!" -msgid "Can't import profile from <filename>{0}</filename> before a printer is added." -msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 +msgctxt "@action" +msgid "Configure group" +msgstr "Konfiguruj grupę" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename>!" -msgid "No custom profile to import in file <filename>{0}</filename>" -msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 +msgctxt "@info:status" +msgid "Please wait until the current job has been sent." +msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename>!" -msgid "Failed to import profile from <filename>{0}</filename>:" -msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 +msgctxt "@info:title" +msgid "Print error" +msgstr "Błąd druku" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252 -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename>!" -msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it." -msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 +msgctxt "@info:text" +msgid "Could not upload the data to the printer." +msgstr "Nie można wgrać danych do drukarki." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Failed to import profile from <filename>{0}</filename>:" -msgstr "Błąd importu profilu z <filename>{0}</filename>:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 +msgctxt "@info:title" +msgid "Network error" +msgstr "Błąd sieci" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" -msgid "Successfully imported profile {0}." -msgstr "" +msgid "Sending Print Job" +msgstr "Wysyłanie zadania druku" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" -msgid "File {0} does not contain any valid profile." -msgstr "Plik {0} nie zawiera żadnego poprawnego profilu." +msgid "Uploading print job to printer." +msgstr "Przesyłanie zadania do drukarki." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" -msgid "Profile {0} has an unknown file type or is corrupted." -msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony." +msgid "Print job queue is full. The printer can't accept a new job." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443 -msgctxt "@label" -msgid "Custom profile" -msgstr "Niestandardowy profil" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 +msgctxt "@info:title" +msgid "Queue Full" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" -msgid "Profile is missing a quality type." -msgstr "Profilowi brakuje typu jakości." +msgid "Print job was successfully sent to the printer." +msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki." -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463 -msgctxt "@info:status" -msgid "There is no active printer yet." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 +msgctxt "@info:title" +msgid "Data Sent" +msgstr "Dane Wysłane" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469 -msgctxt "@info:status" -msgid "Unable to add the profile." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 +msgctxt "@action:button Preceded by 'Ready to'." +msgid "Print over network" +msgstr "Drukuj przez sieć" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483 -#, python-brace-format -msgctxt "@info:status" -msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 +msgctxt "@properties:tooltip" +msgid "Print over network" +msgstr "Drukuj przez sieć" -#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488 -#, python-brace-format +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" -msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." -msgstr "" +msgid "Connected over the network" +msgstr "Połączone przez sieć" -#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 +msgctxt "@action" +msgid "Connect via Network" +msgstr "Połącz przez sieć" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" -msgid "Multiplying and placing objects" -msgstr "Zwielokrotnienie i umieszczanie przedmiotów" +msgid "tomorrow" +msgstr "jutro" -#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32 -msgctxt "@info:title" -msgid "Placing Objects" -msgstr "Umieść Obiekty" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 +msgctxt "@info:status" +msgid "today" +msgstr "dziś" -#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100 -msgctxt "@info:title" -msgid "Placing Object" -msgstr "Rozmieszczenie Obiektów" +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 +msgctxt "@item:inmenu" +msgid "USB printing" +msgstr "Drukowanie USB" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216 -msgctxt "@info" -msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 +msgctxt "@action:button Preceded by 'Ready to'." +msgid "Print via USB" +msgstr "Drukuj przez USB" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277 -msgctxt "@info" -msgid "Unable to reach the Ultimaker account server." -msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker." +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 +msgctxt "@info:tooltip" +msgid "Print via USB" +msgstr "Drukuj przez USB" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278 -msgctxt "@info:title" -msgid "Log-in failed" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 +msgctxt "@info:status" +msgid "Connected via USB" +msgstr "Połączono przez USB" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89 -msgctxt "@message" -msgid "Could not read response." -msgstr "Nie można odczytać odpowiedzi." +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 +msgctxt "@label" +msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" +msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75 +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" -msgid "The provided state is not correct." -msgstr "" +msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." +msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony." -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80 +#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" -msgid "Timeout when authenticating with the account server." -msgstr "" +msgid "Print in Progress" +msgstr "Drukowanie w toku" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97 -msgctxt "@message" -msgid "Please give the required permissions when authorizing this application." -msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji." +#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13 +msgctxt "@item:inlistbox" +msgid "X3D File" +msgstr "X3D Plik" -#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104 -msgctxt "@message" -msgid "Something unexpected happened when trying to log in, please try again." -msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie." +#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12 +msgctxt "@item:inlistbox" +msgid "X-Ray view" +msgstr "Widok X-Ray" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" -msgid "Cura can't start" -msgstr "Cura nie może się uruchomić" +msgid "Open Project" +msgstr "Otwórz projekt" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113 -msgctxt "@label crash message" -msgid "" -"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n" -" <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n" -" <p>Backups can be found in the configuration folder.</p>\n" -" <p>Please send us this Crash Report to fix the problem.</p>\n" -" " -msgstr "" -"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n" -" <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n" -" <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n" -" <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n" -" " +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:63 +msgctxt "@action:ComboBox Update/override existing profile" +msgid "Update existing" +msgstr "Zaktualizuj istniejące" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122 -msgctxt "@action:button" -msgid "Send crash report to Ultimaker" -msgstr "Wyślij raport błędu do Ultimaker" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:64 +msgctxt "@action:ComboBox Save settings in a new profile" +msgid "Create new" +msgstr "Utwórz nowy" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125 -msgctxt "@action:button" -msgid "Show detailed crash report" -msgstr "Pokaż szczegółowy raport błędu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:59 +msgctxt "@action:title" +msgid "Summary - Cura Project" +msgstr "Podsumowanie - Projekt Cura" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129 -msgctxt "@action:button" -msgid "Show configuration folder" -msgstr "Pokaż folder konfiguracyjny" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108 +msgctxt "@info:tooltip" +msgid "How should the conflict in the machine be resolved?" +msgstr "Jak powinny być rozwiązywane błędy w maszynie?" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140 -msgctxt "@action:button" -msgid "Backup and Reset Configuration" -msgstr "Zrób Backup i Zresetuj Konfigurację" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:164 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:95 +msgctxt "@action:label" +msgid "Printer settings" +msgstr "Ustawienia drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171 -msgctxt "@title:window" -msgid "Crash Report" -msgstr "Raport Błędu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:175 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:104 +msgctxt "@action:label" +msgid "Type" +msgstr "Typ" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190 -msgctxt "@label crash message" -msgid "" -"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n" -" <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n" -" " -msgstr "" -"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n" -" <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n" -" " +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:192 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119 +msgctxt "@action:label" +msgid "Printer Group" +msgstr "Grupa drukarek" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198 -msgctxt "@title:groupbox" -msgid "System information" -msgstr "Informacje o systemie" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:217 +msgctxt "@info:tooltip" +msgid "How should the conflict in the profile be resolved?" +msgstr "Jak powinien zostać rozwiązany problem z profilem?" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207 -msgctxt "@label unknown version of Cura" -msgid "Unknown" -msgstr "Nieznany" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:220 +msgctxt "@action:label" +msgid "Profile settings" +msgstr "Ustawienia profilu" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228 -msgctxt "@label Cura version number" -msgid "Cura version" -msgstr "Wersja Cura" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:250 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:375 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:244 +msgctxt "@action:label" +msgid "Name" +msgstr "Nazwa" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229 -msgctxt "@label" -msgid "Cura language" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:268 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:261 +msgctxt "@action:label" +msgid "Intent" +msgstr "Cel" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230 -msgctxt "@label" -msgid "OS language" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:286 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:228 +msgctxt "@action:label" +msgid "Not in profile" +msgstr "Nie w profilu" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231 -msgctxt "@label Type of platform" -msgid "Platform" -msgstr "Platforma" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:233 +msgctxt "@action:label" +msgid "%1 override" +msgid_plural "%1 overrides" +msgstr[0] "%1 nadpisanie" +msgstr[1] "%1 Zastępuje" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232 -msgctxt "@label" -msgid "Qt version" -msgstr "Wersja Qt" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:305 +msgctxt "@action:label" +msgid "Derivative from" +msgstr "Pochodna z" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233 -msgctxt "@label" -msgid "PyQt version" -msgstr "Wersja PyQt" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:311 +msgctxt "@action:label" +msgid "%1, %2 override" +msgid_plural "%1, %2 overrides" +msgstr[0] "%1, %2 nadpisanie" +msgstr[1] "%1, %2 zastępuje" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234 -msgctxt "@label OpenGL version" -msgid "OpenGL" -msgstr "OpenGL" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:333 +msgctxt "@info:tooltip" +msgid "How should the conflict in the material be resolved?" +msgstr "Jak powinien zostać rozwiązany problem z materiałem?" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264 -msgctxt "@label" -msgid "Not yet initialized<br/>" -msgstr "Jeszcze nie uruchomiono<br/>" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:360 +msgctxt "@action:label" +msgid "Material settings" +msgstr "Ustawienia materiału" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267 -#, python-brace-format -msgctxt "@label OpenGL version" -msgid "<li>OpenGL Version: {version}</li>" -msgstr "<li>Wersja OpenGL: {version}</li>" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:396 +msgctxt "@action:label" +msgid "Setting visibility" +msgstr "Ustawienie widoczności" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268 -#, python-brace-format -msgctxt "@label OpenGL vendor" -msgid "<li>OpenGL Vendor: {vendor}</li>" -msgstr "<li>Wydawca OpenGL: {vendor}</li>" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:405 +msgctxt "@action:label" +msgid "Mode" +msgstr "Tryb" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269 -#, python-brace-format -msgctxt "@label OpenGL renderer" -msgid "<li>OpenGL Renderer: {renderer}</li>" -msgstr "<li>OpenGL Renderer: {renderer}</li>" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:421 +msgctxt "@action:label" +msgid "Visible settings:" +msgstr "Widoczne ustawienie:" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303 -msgctxt "@title:groupbox" -msgid "Error traceback" -msgstr "Śledzenie błedu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:426 +msgctxt "@action:label" +msgid "%1 out of %2" +msgstr "%1 poza %2" -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389 -msgctxt "@title:groupbox" -msgid "Logs" -msgstr "Logi" +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:447 +msgctxt "@action:warning" +msgid "Loading a project will clear all models on the build plate." +msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej." -#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:514 msgctxt "@action:button" -msgid "Send report" -msgstr "Wyślij raport" +msgid "Open" +msgstr "Otwórz" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100 -msgctxt "@info" -msgid "" -"Please make sure your printer has a connection:\n" -"- Check if the printer is turned on.\n" -"- Check if the printer is connected to the network.\n" -"- Check if you are signed in to discover cloud-connected printers." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:520 +msgctxt "@action:button" +msgid "Open project anyway" msgstr "" -"Upewnij się, że drukarka ma połączenie:\n" -"- Sprawdź, czy drukarka jest włączona.\n" -"- Sprawdź, czy drukarka jest podłączona do sieci.\n" -"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113 -msgctxt "@info" -msgid "Please connect your printer to the network." -msgstr "Podłącz drukarkę do sieci." +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:529 +msgctxt "@action:button" +msgid "Install missing material" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146 -msgctxt "@label link to technical assistance" -msgid "View user manuals online" -msgstr "Pokaż instrukcję użytkownika online" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 +msgctxt "@button" +msgid "Want more?" +msgstr "Chcesz więcej?" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163 -msgctxt "@info" -msgid "In order to monitor your print from Cura, please connect the printer." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 +msgctxt "@button" +msgid "Backup Now" +msgstr "Utwórz kopię zapasową" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 -msgctxt "@title:window" -msgid "Select Settings to Customize for this model" -msgstr "Wybierz Ustawienia, aby dostosować ten model" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 +msgctxt "@checkbox:description" +msgid "Auto Backup" +msgstr "Automatyczne tworzenie kopii zapasowej" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100 -msgctxt "@label:textbox" -msgid "Filter..." -msgstr "Filtr..." +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 +msgctxt "@checkbox:description" +msgid "Automatically create a backup each day that Cura is started." +msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 -msgctxt "@label:checkbox" -msgid "Show all" -msgstr "Pokaż wszystko" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 +msgctxt "@button" +msgid "Restore" +msgstr "Przywróć" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 -msgctxt "@label" -msgid "Mesh Type" -msgstr "Typ siatki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 +msgctxt "@dialog:title" +msgid "Delete Backup" +msgstr "Usuń kopię zapasową" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 -msgctxt "@label" -msgid "Normal model" -msgstr "Normalny model" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 +msgctxt "@dialog:info" +msgid "Are you sure you want to delete this backup? This cannot be undone." +msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 -msgctxt "@label" -msgid "Print as support" -msgstr "Drukuj jako podpora" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 +msgctxt "@dialog:title" +msgid "Restore Backup" +msgstr "Przywróć kopię zapasową" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 -msgctxt "@label" -msgid "Modify settings for overlaps" -msgstr "Modyfikuj ustawienia nakładania" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 +msgctxt "@dialog:info" +msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" +msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 -msgctxt "@label" -msgid "Don't support overlaps" -msgstr "Nie wspieraj nałożenia" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 +msgctxt "@backuplist:label" +msgid "Cura Version" +msgstr "Wersja Cura" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159 -msgctxt "@item:inlistbox" -msgid "Infill mesh only" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 +msgctxt "@backuplist:label" +msgid "Machines" +msgstr "Drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 -msgctxt "@item:inlistbox" -msgid "Cutting mesh" +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 +msgctxt "@backuplist:label" +msgid "Materials" +msgstr "Materiały" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 +msgctxt "@backuplist:label" +msgid "Profiles" +msgstr "Profile" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 +msgctxt "@backuplist:label" +msgid "Plugins" +msgstr "Pluginy" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25 +msgctxt "@title:window" +msgid "Cura Backups" +msgstr "Kopie zapasowe cura" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 +msgctxt "@title" +msgid "My Backups" +msgstr "Moje Kopie Zapasowe" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36 +msgctxt "@empty_state" +msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." +msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55 +msgctxt "@backup_limit_info" +msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." +msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 +msgctxt "@description" +msgid "Backup and synchronize your Cura settings." +msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:49 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:164 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:212 +msgctxt "@button" +msgid "Sign in" +msgstr "Zaloguj" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216 +msgctxt "@option" +msgid "Save Cura project and print file" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385 -msgctxt "@action:button" -msgid "Select settings" -msgstr "Wybierz ustawienia" +#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217 +msgctxt "@option" +msgid "Save Cura project" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Aktualizacja Oprogramowania Sprzętowego" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Automatycznie uaktualnij oprogramowanie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Prześlij niestandardowe oprogramowanie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Wybierz niestandardowe oprogramowanie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113 msgctxt "@title:window" msgid "Firmware Update" msgstr "Aktualizacja oprogramowania układowego" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137 msgctxt "@label" msgid "Updating firmware." msgstr "Aktualizowanie oprogramowania." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139 msgctxt "@label" msgid "Firmware update completed." msgstr "Aktualizacja oprogramowania zakończona." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148 +#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 -msgctxt "@label:status" -msgid "Aborted" -msgstr "Anulowano" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 -msgctxt "@label:status" -msgid "Finished" -msgstr "Zakończono" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351 -msgctxt "@label:status" -msgid "Preparing..." -msgstr "Przygotowyję..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 -msgctxt "@label:status" -msgid "Aborting..." -msgstr "Przerywanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 -msgctxt "@label:status" -msgid "Failed" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 -msgctxt "@label:status" -msgid "Pausing..." -msgstr "Zatrzymywanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 -msgctxt "@label:status" -msgid "Paused" -msgstr "Wstrzymana" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 -msgctxt "@label:status" -msgid "Resuming..." -msgstr "Przywracanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 -msgctxt "@label:status" -msgid "Action required" -msgstr "Konieczne są działania" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 -msgctxt "@label:status" -msgid "Finishes %1 at %2" -msgstr "Zakończone %1 z %2" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 -msgctxt "@label link to Connect and Cloud interfaces" -msgid "Manage printer" -msgstr "Zarządzaj drukarkami" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175 -msgctxt "@label" -msgid "Glass" -msgstr "Szkło" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239 -msgctxt "@info" -msgid "Please update your printer's firmware to manage the queue remotely." -msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275 -msgctxt "@info" -msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335 -msgctxt "@label:status" -msgid "Loading..." -msgstr "Wczytywanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339 -msgctxt "@label:status" -msgid "Unavailable" -msgstr "Niedostępne" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343 -msgctxt "@label:status" -msgid "Unreachable" -msgstr "Nieosiągalna" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347 -msgctxt "@label:status" -msgid "Idle" -msgstr "Zajęta" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 -msgctxt "@label:status" -msgid "Printing" -msgstr "Drukowanie" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397 -msgctxt "@label" -msgid "Untitled" -msgstr "Bez tytułu" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412 -msgctxt "@label" -msgid "Anonymous" -msgstr "Anonimowa" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433 -msgctxt "@label:status" -msgid "Requires configuration changes" -msgstr "Wymaga zmian konfiguracji" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447 -msgctxt "@action:button" -msgid "Details" -msgstr "Szczegóły" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 -msgctxt "@title:window" -msgid "Configuration Changes" -msgstr "Zmiany konfiguracji" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 -msgctxt "@action:button" -msgid "Override" -msgstr "Nadpisz" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 -msgctxt "@label" -msgid "The assigned printer, %1, requires the following configuration change:" -msgid_plural "The assigned printer, %1, requires the following configuration changes:" -msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:" -msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 -msgctxt "@label" -msgid "The printer %1 is assigned, but the job contains an unknown material configuration." -msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 -msgctxt "@label" -msgid "Change material %1 from %2 to %3." -msgstr "Zmień materiał %1 z %2 na %3." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 -msgctxt "@label" -msgid "Load %3 as material %1 (This cannot be overridden)." -msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 -msgctxt "@label" -msgid "Change print core %1 from %2 to %3." -msgstr "Zmień rdzeń drukujący %1 z %2 na %3." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106 -msgctxt "@label" -msgid "Change build plate to %1 (This cannot be overridden)." -msgstr "Zmień stół na %1 (Nie można nadpisać)." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113 -msgctxt "@label" -msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." -msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154 -msgctxt "@label" -msgid "Aluminum" -msgstr "Aluminum" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 -msgctxt "@title:window" -msgid "Print over network" -msgstr "Drukuj przez sieć" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 -msgctxt "@action:button" -msgid "Print" -msgstr "Drukuj" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 -msgctxt "@label" -msgid "Printer selection" -msgstr "Wybór drukarki" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 -msgctxt "@title:window" -msgid "Connect to Networked Printer" -msgstr "Połącz się z drukarką sieciową" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 -msgctxt "@label" -msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." -msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 -msgctxt "@label" -msgid "Select your printer from the list below:" -msgstr "Wybierz swoją drukarkę z poniższej listy:" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 -msgctxt "@action:button" -msgid "Edit" -msgstr "Edycja" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320 -msgctxt "@action:button" -msgid "Remove" -msgstr "Usunąć" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 -msgctxt "@action:button" -msgid "Refresh" -msgstr "Odśwież" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 -msgctxt "@label" -msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>" -msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 -msgctxt "@label" -msgid "Type" -msgstr "Rodzaj" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 -msgctxt "@label" -msgid "Firmware version" -msgstr "Wersja oprogramowania" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 -msgctxt "@label" -msgid "Address" -msgstr "Adres" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 -msgctxt "@label" -msgid "This printer is not set up to host a group of printers." -msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 -msgctxt "@label" -msgid "This printer is the host for a group of %1 printers." -msgstr "Ta drukarka jest hostem grupy %1 drukarek." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 -msgctxt "@label" -msgid "The printer at this address has not yet responded." -msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 -msgctxt "@action:button" -msgid "Connect" -msgstr "Połącz" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 -msgctxt "@title:window" -msgid "Invalid IP address" -msgstr "Nieprawidłowy adres IP" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 -msgctxt "@text" -msgid "Please enter a valid IP address." -msgstr "Proszę podać poprawny adres IP." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 -msgctxt "@title:window" -msgid "Printer Address" -msgstr "Adres drukarki" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 -msgctxt "@label" -msgid "Enter the IP address of your printer on the network." -msgstr "Wprowadź adres IP drukarki." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 -msgctxt "@label" -msgid "Unavailable printer" -msgstr "Drukarka niedostępna" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 -msgctxt "@label" -msgid "First available" -msgstr "Pierwsza dostępna" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 -msgctxt "@label" -msgid "Move to top" -msgstr "Przesuń na początek" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 -msgctxt "@label" -msgid "Delete" -msgstr "Usuń" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284 -msgctxt "@label" -msgid "Resume" -msgstr "Ponów" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 -msgctxt "@label" -msgid "Pausing..." -msgstr "Zatrzymywanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 -msgctxt "@label" -msgid "Resuming..." -msgstr "Przywracanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288 -msgctxt "@label" -msgid "Pause" -msgstr "Wstrzymaj" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 -msgctxt "@label" -msgid "Aborting..." -msgstr "Przerywanie..." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 -msgctxt "@label" -msgid "Abort" -msgstr "Anuluj" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142 -msgctxt "@label %1 is the name of a print job." -msgid "Are you sure you want to move %1 to the top of the queue?" -msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 -msgctxt "@window:title" -msgid "Move print job to top" -msgstr "Przesuń zadanie drukowania na początek" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151 -msgctxt "@label %1 is the name of a print job." -msgid "Are you sure you want to delete %1?" -msgstr "Czy jesteś pewien, że chcesz usunąć %1?" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152 -msgctxt "@window:title" -msgid "Delete print job" -msgstr "Usuń zadanie drukowania" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160 -msgctxt "@label %1 is the name of a print job." -msgid "Are you sure you want to abort %1?" -msgstr "Czy jesteś pewien, że chcesz anulować %1?" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326 -msgctxt "@window:title" -msgid "Abort print" -msgstr "Anuluj wydruk" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 -msgctxt "@label" -msgid "Queued" -msgstr "W kolejce" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63 -msgctxt "@label link to connect manager" -msgid "Manage in browser" -msgstr "Zarządzaj w przeglądarce" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90 -msgctxt "@label" -msgid "There are no print jobs in the queue. Slice and send a job to add one." -msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98 -msgctxt "@label" -msgid "Print jobs" -msgstr "Zadania druku" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107 -msgctxt "@label" -msgid "Total print time" -msgstr "Łączny czas druku" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116 -msgctxt "@label" -msgid "Waiting for" -msgstr "Oczekiwanie na" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48 -msgctxt "@label" -msgid "Color scheme" -msgstr "Schemat kolorów" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105 -msgctxt "@label:listbox" -msgid "Material Color" -msgstr "Kolor materiału" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109 -msgctxt "@label:listbox" -msgid "Line Type" -msgstr "Rodzaj linii" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113 -msgctxt "@label:listbox" -msgid "Speed" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117 -msgctxt "@label:listbox" -msgid "Layer Thickness" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121 -msgctxt "@label:listbox" -msgid "Line Width" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125 -msgctxt "@label:listbox" -msgid "Flow" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165 -msgctxt "@label" -msgid "Compatibility Mode" -msgstr "Tryb zgodności" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232 -msgctxt "@label" -msgid "Travels" -msgstr "Ruchy" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238 -msgctxt "@label" -msgid "Helpers" -msgstr "Pomoce" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244 -msgctxt "@label" -msgid "Shell" -msgstr "Obrys" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64 -msgctxt "@label" -msgid "Infill" -msgstr "Wypełnienie" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258 -msgctxt "@label" -msgid "Starts" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307 -msgctxt "@label" -msgid "Only Show Top Layers" -msgstr "Pokaż tylko najwyższe warstwy" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316 -msgctxt "@label" -msgid "Show 5 Detailed Layers On Top" -msgstr "Pokaż 5 Szczegółowych Warstw" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329 -msgctxt "@label" -msgid "Top / Bottom" -msgstr "Góra/ Dół" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333 -msgctxt "@label" -msgid "Inner Wall" -msgstr "Wewnętrzna ściana" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400 -msgctxt "@label" -msgid "min" -msgstr "min" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465 -msgctxt "@label" -msgid "max" -msgstr "max" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Wysokość (mm)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "Maksymalna odległość każdego piksela od \"Bazy.\"" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Baza (mm)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "Wysokość podstawy od stołu w milimetrach." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Szerokość (mm)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Głębokość (mm)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "Głębokość w milimetrach na stole" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "Ciemniejsze jest wyższe" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "Jaśniejszy jest wyższy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Wygładzanie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "Ilość wygładzania do zastosowania do obrazu." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:329 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:136 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:143 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:80 msgctxt "@action:button" msgid "OK" msgstr "OK" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 -msgctxt "@title:window" -msgid "Open Project" -msgstr "Otwórz projekt" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55 -msgctxt "@action:ComboBox Update/override existing profile" -msgid "Update existing" -msgstr "Zaktualizuj istniejące" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56 -msgctxt "@action:ComboBox Save settings in a new profile" -msgid "Create new" -msgstr "Utwórz nowy" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52 -msgctxt "@action:title" -msgid "Summary - Cura Project" -msgstr "Podsumowanie - Projekt Cura" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 +msgctxt "@title:tab" +msgid "Printer" +msgstr "Drukarka" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100 -msgctxt "@info:tooltip" -msgid "How should the conflict in the machine be resolved?" -msgstr "Jak powinny być rozwiązywane błędy w maszynie?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 +msgctxt "@title:label" +msgid "Nozzle Settings" +msgstr "Ustawienia dyszy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88 -msgctxt "@action:label" -msgid "Printer settings" -msgstr "Ustawienia drukarki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74 +msgctxt "@label" +msgid "Nozzle size" +msgstr "Rozmiar dyszy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97 -msgctxt "@action:label" -msgid "Type" -msgstr "Typ" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 +msgctxt "@label" +msgid "mm" +msgstr "mm" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 -msgctxt "@action:label" -msgid "Printer Group" -msgstr "Grupa drukarek" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88 +msgctxt "@label" +msgid "Compatible material diameter" +msgstr "Kompatybilna średnica materiału" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209 -msgctxt "@info:tooltip" -msgid "How should the conflict in the profile be resolved?" -msgstr "Jak powinien zostać rozwiązany problem z profilem?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104 +msgctxt "@label" +msgid "Nozzle offset X" +msgstr "Korekcja dyszy X" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213 -msgctxt "@action:label" -msgid "Profile settings" -msgstr "Ustawienia profilu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119 +msgctxt "@label" +msgid "Nozzle offset Y" +msgstr "Korekcja dyszy Y" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237 -msgctxt "@action:label" -msgid "Name" -msgstr "Nazwa" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134 +msgctxt "@label" +msgid "Cooling Fan Number" +msgstr "Numer Wentylatora" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254 -msgctxt "@action:label" -msgid "Intent" -msgstr "Cel" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 +msgctxt "@title:label" +msgid "Extruder Start G-code" +msgstr "Początkowy G-code ekstrudera" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221 -msgctxt "@action:label" -msgid "Not in profile" -msgstr "Nie w profilu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 +msgctxt "@title:label" +msgid "Extruder End G-code" +msgstr "Końcowy G-code ekstrudera" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 -msgctxt "@action:label" -msgid "%1 override" -msgid_plural "%1 overrides" -msgstr[0] "%1 nadpisanie" -msgstr[1] "%1 Zastępuje" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 +msgctxt "@title:label" +msgid "Printer Settings" +msgstr "Ustawienia drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297 -msgctxt "@action:label" -msgid "Derivative from" -msgstr "Pochodna z" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68 +msgctxt "@label" +msgid "X (Width)" +msgstr "X (Szerokość)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303 -msgctxt "@action:label" -msgid "%1, %2 override" -msgid_plural "%1, %2 overrides" -msgstr[0] "%1, %2 nadpisanie" -msgstr[1] "%1, %2 zastępuje" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83 +msgctxt "@label" +msgid "Y (Depth)" +msgstr "Y (Głębokość)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 -msgctxt "@info:tooltip" -msgid "How should the conflict in the material be resolved?" -msgstr "Jak powinien zostać rozwiązany problem z materiałem?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98 +msgctxt "@label" +msgid "Z (Height)" +msgstr "Z (Wysokość)" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352 -msgctxt "@action:label" -msgid "Material settings" -msgstr "Ustawienia materiału" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112 +msgctxt "@label" +msgid "Build plate shape" +msgstr "Kształt stołu roboczego" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388 -msgctxt "@action:label" -msgid "Setting visibility" -msgstr "Ustawienie widoczności" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125 +msgctxt "@label" +msgid "Origin at center" +msgstr "Początek na środku" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397 -msgctxt "@action:label" -msgid "Mode" -msgstr "Tryb" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137 +msgctxt "@label" +msgid "Heated bed" +msgstr "Podgrzewany stół" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413 -msgctxt "@action:label" -msgid "Visible settings:" -msgstr "Widoczne ustawienie:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149 +msgctxt "@label" +msgid "Heated build volume" +msgstr "Grzany obszar roboczy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418 -msgctxt "@action:label" -msgid "%1 out of %2" -msgstr "%1 poza %2" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161 +msgctxt "@label" +msgid "G-code flavor" +msgstr "Wersja G-code" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439 -msgctxt "@action:warning" -msgid "Loading a project will clear all models on the build plate." -msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej." +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185 +msgctxt "@title:label" +msgid "Printhead Settings" +msgstr "Ustawienia głowicy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456 -msgctxt "@action:button" -msgid "Open" -msgstr "Otwórz" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197 +msgctxt "@label" +msgid "X min" +msgstr "X min" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 -msgctxt "@button" -msgid "Want more?" -msgstr "Chcesz więcej?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217 +msgctxt "@label" +msgid "Y min" +msgstr "Y min" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 -msgctxt "@button" -msgid "Backup Now" -msgstr "Utwórz kopię zapasową" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237 +msgctxt "@label" +msgid "X max" +msgstr "X max" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 -msgctxt "@checkbox:description" -msgid "Auto Backup" -msgstr "Automatyczne tworzenie kopii zapasowej" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257 +msgctxt "@label" +msgid "Y max" +msgstr "Y max" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 -msgctxt "@checkbox:description" -msgid "Automatically create a backup each day that Cura is started." -msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę." +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275 +msgctxt "@label" +msgid "Gantry Height" +msgstr "Wysokość wózka" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 -msgctxt "@backuplist:label" -msgid "Cura Version" -msgstr "Wersja Cura" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289 +msgctxt "@label" +msgid "Number of Extruders" +msgstr "Liczba ekstruderów" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 -msgctxt "@backuplist:label" -msgid "Machines" -msgstr "Drukarki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341 +msgctxt "@label" +msgid "Apply Extruder offsets to GCode" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 -msgctxt "@backuplist:label" -msgid "Materials" -msgstr "Materiały" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:389 +msgctxt "@title:label" +msgid "Start G-code" +msgstr "Początkowy G-code" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 -msgctxt "@backuplist:label" -msgid "Profiles" -msgstr "Profile" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:400 +msgctxt "@title:label" +msgid "End G-code" +msgstr "Końcowy G-code" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 -msgctxt "@backuplist:label" -msgid "Plugins" -msgstr "Pluginy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15 +msgctxt "@title" +msgid "Changes from your account" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 msgctxt "@button" -msgid "Restore" -msgstr "Przywróć" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 -msgctxt "@dialog:title" -msgid "Delete Backup" -msgstr "Usuń kopię zapasową" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 -msgctxt "@dialog:info" -msgid "Are you sure you want to delete this backup? This cannot be undone." -msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 -msgctxt "@dialog:title" -msgid "Restore Backup" -msgstr "Przywróć kopię zapasową" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 -msgctxt "@dialog:info" -msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" -msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 -msgctxt "@description" -msgid "Backup and synchronize your Cura settings." -msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura." +msgid "Dismiss" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:118 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:175 msgctxt "@button" -msgid "Sign in" -msgstr "Zaloguj" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 -msgctxt "@title" -msgid "My Backups" -msgstr "Moje Kopie Zapasowe" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 -msgctxt "@empty_state" -msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." -msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 -msgctxt "@backup_limit_info" -msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." -msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze." - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25 -msgctxt "@title:window" -msgid "Cura Backups" -msgstr "Kopie zapasowe cura" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 -msgctxt "@title:window" -msgid "More information on anonymous data collection" -msgstr "Wiećej informacji o zbieraniu anonimowych danych" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 -msgctxt "@text:window" -msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" -msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 -msgctxt "@text:window" -msgid "I don't want to send anonymous data" -msgstr "Nie chcę wysyłać anonimowych danych" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 -msgctxt "@text:window" -msgid "Allow sending anonymous data" -msgstr "Pozwól na wysyłanie anonimowych danych" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 -msgctxt "@title:window" -msgid "Post Processing Plugin" -msgstr "Plugin post-processingu" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 -msgctxt "@label" -msgid "Post Processing Scripts" -msgstr "Skrypty post-processingu" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221 -msgctxt "@action" -msgid "Add a script" -msgstr "Dodaj skrypt" +msgid "Next" +msgstr "Dalej" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52 msgctxt "@label" -msgid "Settings" -msgstr "Ustawienia" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466 -msgctxt "@info:tooltip" -msgid "Change active post-processing scripts." +msgid "The following packages will be added:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470 -msgctxt "@info:tooltip" -msgid "The following script is active:" -msgid_plural "The following scripts are active:" -msgstr[0] "" -msgstr[1] "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 -msgctxt "@label" -msgid "Please select any upgrades made to this Ultimaker Original" -msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94 msgctxt "@label" -msgid "Heated Build Plate (official kit or self-built)" -msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)" +msgid "The following packages can not be installed because of an incompatible Cura version:" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15 msgctxt "@title" -msgid "Build Plate Leveling" -msgstr "Poziomowanie stołu" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 -msgctxt "@label" -msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." -msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować." +msgid "Install missing Materials" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 -msgctxt "@label" -msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." -msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:15 +msgctxt "@button" +msgid "Plugin license agreement" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 -msgctxt "@action:button" -msgid "Start Build Plate Leveling" -msgstr "Rozpocznij poziomowanie stołu roboczego" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:47 +msgctxt "@text" +msgid "Please read and agree with the plugin licence." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 -msgctxt "@action:button" -msgid "Move to Next Position" -msgstr "Przejdź do następnego położenia" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:70 +msgctxt "@button" +msgid "Accept" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 -msgctxt "@info" -msgid "Ultimaker Verified Plug-in" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11 +msgctxt "@header" +msgid "Manage packages" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 -msgctxt "@info" -msgid "Ultimaker Certified Material" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15 +msgctxt "@text" +msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 -msgctxt "@info" -msgid "Ultimaker Verified Package" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 +msgctxt "@info:tooltip" +msgid "Manage packages" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:87 msgctxt "@title" msgid "Loading..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:148 msgctxt "@button" msgid "Plugins" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:156 msgctxt "@button" msgid "Materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:193 msgctxt "@info" msgid "Search in the browser" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:271 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:279 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:8 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MissingPackages.qml:8 +msgctxt "@header" +msgid "Install Materials" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:12 +msgctxt "@text" +msgid "Select and install material profiles optimised for your Ultimaker 3D printers." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35 msgctxt "@label" +msgid "You need to accept the license to install the package" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/OnboardBanner.qml:101 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:207 +msgctxt "@button:label" +msgid "Learn More" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:172 +msgctxt "@label Is followed by the name of an author" msgid "By" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226 msgctxt "@button" msgid "Enable" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226 msgctxt "@button" msgid "Disable" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:244 msgctxt "@button" msgid "Downgrading..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:245 msgctxt "@button" msgid "Downgrade" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:249 msgctxt "@button" msgid "Installing..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:250 msgctxt "@button" msgid "Install" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:254 msgctxt "@button" msgid "Uninstall" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269 msgctxt "@button" msgid "Updating..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269 msgctxt "@button" msgid "Update" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" -msgid "Install Plugins" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12 -msgctxt "@text" -msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users." +msgid "Package details" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 -msgctxt "@info:tooltip" -msgid "Manage packages" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40 +msgctxt "@button:tooltip" +msgid "Back" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:81 msgctxt "@header" msgid "Description" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:110 msgctxt "@header" msgid "Compatible printers" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:134 msgctxt "@info" msgid "No compatibility information" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:152 msgctxt "@header" msgid "Compatible support materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:176 msgctxt "@info No materials" msgid "None" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:193 msgctxt "@header" msgid "Compatible with Material Station" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "Yes" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "No" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:219 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Visit plug-in website" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Website" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:252 msgctxt "@button" msgid "Buy spool" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:261 msgctxt "@button" msgid "Safety datasheet" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:270 msgctxt "@button" msgid "Technical datasheet" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15 -msgctxt "@header" -msgid "Package details" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40 -msgctxt "@button:tooltip" -msgid "Back" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16 -msgctxt "@button" -msgid "Plugin license agreement" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48 -msgctxt "@text" -msgid "Please read and agree with the plugin licence." -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74 -msgctxt "@button" -msgid "Accept" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83 -msgctxt "@button" -msgid "Decline" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Failed to load packages:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Retry?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:167 msgctxt "@button" msgid "Loading" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No more results to load" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No results found with current filter" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:226 msgctxt "@button" msgid "Load more" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" -msgid "Manage packages" +msgid "Install Plugins" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" -msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." +msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8 -msgctxt "@header" -msgid "Install Materials" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 +msgctxt "@info" +msgid "Ultimaker Verified Plug-in" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12 -msgctxt "@text" -msgid "Select and install material profiles optimised for your Ultimaker 3D printers." +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 +msgctxt "@info" +msgid "Ultimaker Certified Material" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 -msgctxt "@title:tab" -msgid "Printer" -msgstr "Drukarka" +#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 +msgctxt "@info" +msgid "Ultimaker Verified Package" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 -msgctxt "@title:label" -msgid "Nozzle Settings" -msgstr "Ustawienia dyszy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100 +msgctxt "@info" +msgid "" +"Please make sure your printer has a connection:\n" +"- Check if the printer is turned on.\n" +"- Check if the printer is connected to the network.\n" +"- Check if you are signed in to discover cloud-connected printers." +msgstr "" +"Upewnij się, że drukarka ma połączenie:\n" +"- Sprawdź, czy drukarka jest włączona.\n" +"- Sprawdź, czy drukarka jest podłączona do sieci.\n" +"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury." -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 -msgctxt "@label" -msgid "Nozzle size" -msgstr "Rozmiar dyszy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:113 +msgctxt "@info" +msgid "Please connect your printer to the network." +msgstr "Podłącz drukarkę do sieci." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:147 +msgctxt "@label link to technical assistance" +msgid "View user manuals online" +msgstr "Pokaż instrukcję użytkownika online" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:163 +msgctxt "@info" +msgid "In order to monitor your print from Cura, please connect the printer." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" -msgid "mm" -msgstr "mm" +msgid "Mesh Type" +msgstr "Typ siatki" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" -msgid "Compatible material diameter" -msgstr "Kompatybilna średnica materiału" +msgid "Normal model" +msgstr "Normalny model" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" -msgid "Nozzle offset X" -msgstr "Korekcja dyszy X" +msgid "Print as support" +msgstr "Drukuj jako podpora" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" -msgid "Nozzle offset Y" -msgstr "Korekcja dyszy Y" +msgid "Modify settings for overlaps" +msgstr "Modyfikuj ustawienia nakładania" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" -msgid "Cooling Fan Number" -msgstr "Numer Wentylatora" +msgid "Don't support overlaps" +msgstr "Nie wspieraj nałożenia" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163 -msgctxt "@title:label" -msgid "Extruder Start G-code" -msgstr "Początkowy G-code ekstrudera" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159 +msgctxt "@item:inlistbox" +msgid "Infill mesh only" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177 -msgctxt "@title:label" -msgid "Extruder End G-code" -msgstr "Końcowy G-code ekstrudera" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 +msgctxt "@item:inlistbox" +msgid "Cutting mesh" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 -msgctxt "@title:label" -msgid "Printer Settings" -msgstr "Ustawienia drukarki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385 +msgctxt "@action:button" +msgid "Select settings" +msgstr "Wybierz ustawienia" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 -msgctxt "@label" -msgid "X (Width)" -msgstr "X (Szerokość)" +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 +msgctxt "@title:window" +msgid "Select Settings to Customize for this model" +msgstr "Wybierz Ustawienia, aby dostosować ten model" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:102 +msgctxt "@label:textbox" +msgid "Filter..." +msgstr "Filtr..." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 +msgctxt "@label:checkbox" +msgid "Show all" +msgstr "Pokaż wszystko" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 +msgctxt "@title:window" +msgid "Post Processing Plugin" +msgstr "Plugin post-processingu" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" -msgid "Y (Depth)" -msgstr "Y (Głębokość)" +msgid "Post Processing Scripts" +msgstr "Skrypty post-processingu" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215 +msgctxt "@action" +msgid "Add a script" +msgstr "Dodaj skrypt" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251 msgctxt "@label" -msgid "Z (Height)" -msgstr "Z (Wysokość)" +msgid "Settings" +msgstr "Ustawienia" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:459 +msgctxt "@info:tooltip" +msgid "Change active post-processing scripts." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:463 +msgctxt "@info:tooltip" +msgid "The following script is active:" +msgid_plural "The following scripts are active:" +msgstr[0] "" +msgstr[1] "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:18 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:47 msgctxt "@label" -msgid "Build plate shape" -msgstr "Kształt stołu roboczego" +msgid "Color scheme" +msgstr "Schemat kolorów" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:104 +msgctxt "@label:listbox" +msgid "Material Color" +msgstr "Kolor materiału" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:108 +msgctxt "@label:listbox" +msgid "Line Type" +msgstr "Rodzaj linii" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:112 +msgctxt "@label:listbox" +msgid "Speed" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:116 +msgctxt "@label:listbox" +msgid "Layer Thickness" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:120 +msgctxt "@label:listbox" +msgid "Line Width" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:124 +msgctxt "@label:listbox" +msgid "Flow" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:164 msgctxt "@label" -msgid "Origin at center" -msgstr "Początek na środku" +msgid "Compatibility Mode" +msgstr "Tryb zgodności" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:231 msgctxt "@label" -msgid "Heated bed" -msgstr "Podgrzewany stół" +msgid "Travels" +msgstr "Ruchy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237 msgctxt "@label" -msgid "Heated build volume" -msgstr "Grzany obszar roboczy" +msgid "Helpers" +msgstr "Pomoce" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243 msgctxt "@label" -msgid "G-code flavor" -msgstr "Wersja G-code" +msgid "Shell" +msgstr "Obrys" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 -msgctxt "@title:label" -msgid "Printhead Settings" -msgstr "Ustawienia głowicy" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64 +msgctxt "@label" +msgid "Infill" +msgstr "Wypełnienie" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257 msgctxt "@label" -msgid "X min" -msgstr "X min" +msgid "Starts" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:304 msgctxt "@label" -msgid "Y min" -msgstr "Y min" +msgid "Only Show Top Layers" +msgstr "Pokaż tylko najwyższe warstwy" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:313 msgctxt "@label" -msgid "X max" -msgstr "X max" +msgid "Show 5 Detailed Layers On Top" +msgstr "Pokaż 5 Szczegółowych Warstw" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" -msgid "Y max" -msgstr "Y max" +msgid "Top / Bottom" +msgstr "Góra/ Dół" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:330 msgctxt "@label" -msgid "Gantry Height" -msgstr "Wysokość wózka" +msgid "Inner Wall" +msgstr "Wewnętrzna ściana" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:397 msgctxt "@label" -msgid "Number of Extruders" -msgstr "Liczba ekstruderów" +msgid "min" +msgstr "min" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:462 msgctxt "@label" -msgid "Apply Extruder offsets to GCode" -msgstr "" +msgid "max" +msgstr "max" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393 -msgctxt "@title:label" -msgid "Start G-code" -msgstr "Początkowy G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:16 +msgctxt "@title:window" +msgid "More information on anonymous data collection" +msgstr "Wiećej informacji o zbieraniu anonimowych danych" -#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404 -msgctxt "@title:label" -msgid "End G-code" -msgstr "Końcowy G-code" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:73 +msgctxt "@text:window" +msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" +msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 -msgctxt "@label:button" -msgid "My printers" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:107 +msgctxt "@text:window" +msgid "I don't want to send anonymous data" +msgstr "Nie chcę wysyłać anonimowych danych" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 -msgctxt "@tooltip:button" -msgid "Monitor printers in Ultimaker Digital Factory." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:116 +msgctxt "@text:window" +msgid "Allow sending anonymous data" +msgstr "Pozwól na wysyłanie anonimowych danych" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 -msgctxt "@tooltip:button" -msgid "Create print projects in Digital Library." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 +msgctxt "@title" +msgid "Build Plate Leveling" +msgstr "Poziomowanie stołu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 -msgctxt "@label:button" -msgid "Print jobs" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42 +msgctxt "@label" +msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." +msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 -msgctxt "@tooltip:button" -msgid "Monitor print jobs and reprint from your print history." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52 +msgctxt "@label" +msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." +msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 -msgctxt "@tooltip:button" -msgid "Extend Ultimaker Cura with plugins and material profiles." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67 +msgctxt "@action:button" +msgid "Start Build Plate Leveling" +msgstr "Rozpocznij poziomowanie stołu roboczego" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 -msgctxt "@tooltip:button" -msgid "Become a 3D printing expert with Ultimaker e-learning." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79 +msgctxt "@action:button" +msgid "Move to Next Position" +msgstr "Przejdź do następnego położenia" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 -msgctxt "@label:button" -msgid "Ultimaker support" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 +msgctxt "@label" +msgid "Please select any upgrades made to this Ultimaker Original" +msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 -msgctxt "@tooltip:button" -msgid "Learn how to get started with Ultimaker Cura." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39 +msgctxt "@label" +msgid "Heated Build Plate (official kit or self-built)" +msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 -msgctxt "@label:button" -msgid "Ask a question" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 +msgctxt "@title:window" +msgid "Connect to Networked Printer" +msgstr "Połącz się z drukarką sieciową" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 -msgctxt "@tooltip:button" -msgid "Consult the Ultimaker Community." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 +msgctxt "@label" +msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." +msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 -msgctxt "@label:button" -msgid "Report a bug" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 +msgctxt "@label" +msgid "Select your printer from the list below:" +msgstr "Wybierz swoją drukarkę z poniższej listy:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 -msgctxt "@tooltip:button" -msgid "Let developers know that something is going wrong." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 +msgctxt "@action:button" +msgid "Edit" +msgstr "Edycja" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 -msgctxt "@tooltip:button" -msgid "Visit the Ultimaker website." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:140 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:321 +msgctxt "@action:button" +msgid "Remove" +msgstr "Usunąć" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16 -msgctxt "@label %1 is filled in with the name of an extruder" -msgid "Print Selected Model with %1" -msgid_plural "Print Selected Models with %1" -msgstr[0] "Drukuj Wybrany Model z %1" -msgstr[1] "Drukuj Wybrane Modele z %1" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 +msgctxt "@action:button" +msgid "Refresh" +msgstr "Odśwież" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "&Settings" -msgstr "Opcje" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 +msgctxt "@label" +msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>" +msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87 -msgctxt "@title:window" -msgid "New project" -msgstr "Nowy projekt" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:247 +msgctxt "@label" +msgid "Type" +msgstr "Rodzaj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88 -msgctxt "@info:question" -msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." -msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:256 +msgctxt "@label" +msgid "Firmware version" +msgstr "Wersja oprogramowania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135 -msgctxt "@action:button" -msgid "Marketplace" -msgstr "Marketplace" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:266 +msgctxt "@label" +msgid "Address" +msgstr "Adres" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" -msgid "Build plate" -msgstr "Stół roboczy" +msgid "This printer is not set up to host a group of printers." +msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55 -msgctxt "@tooltip" -msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." -msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 +msgctxt "@label" +msgid "This printer is the host for a group of %1 printers." +msgstr "Ta drukarka jest hostem grupy %1 drukarek." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 -msgctxt "@tooltip" -msgid "The current temperature of the heated bed." -msgstr "Bieżąca temperatura podgrzewanego stołu." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 +msgctxt "@label" +msgid "The printer at this address has not yet responded." +msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162 -msgctxt "@tooltip of temperature input" -msgid "The temperature to pre-heat the bed to." -msgstr "Temperatura do wstępnego podgrzewania stołu." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 +msgctxt "@action:button" +msgid "Connect" +msgstr "Połącz" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271 -msgctxt "@button Cancel pre-heating" -msgid "Cancel" -msgstr "Anuluj" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 +msgctxt "@title:window" +msgid "Invalid IP address" +msgstr "Nieprawidłowy adres IP" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274 -msgctxt "@button" -msgid "Pre-heat" -msgstr "Podgrzewanie wstępne" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:141 +msgctxt "@text" +msgid "Please enter a valid IP address." +msgstr "Proszę podać poprawny adres IP." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286 -msgctxt "@tooltip of pre-heat" -msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." -msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 +msgctxt "@title:window" +msgid "Printer Address" +msgstr "Adres drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56 -msgctxt "@info:status" -msgid "The printer is not connected." -msgstr "Drukarka nie jest podłączona." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:97 +msgctxt "@label" +msgid "Enter the IP address of your printer on the network." +msgstr "Wprowadź adres IP drukarki." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 +msgctxt "@title:window" +msgid "Configuration Changes" +msgstr "Zmiany konfiguracji" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 +msgctxt "@action:button" +msgid "Override" +msgstr "Nadpisz" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" -msgid "Printer control" -msgstr "Kontrola drukarką" +msgid "The assigned printer, %1, requires the following configuration change:" +msgid_plural "The assigned printer, %1, requires the following configuration changes:" +msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:" +msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" -msgid "Jog Position" -msgstr "Pozycja Swobodnego Ruchu" +msgid "The printer %1 is assigned, but the job contains an unknown material configuration." +msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" -msgid "X/Y" -msgstr "X/Y" +msgid "Change material %1 from %2 to %3." +msgstr "Zmień materiał %1 z %2 na %3." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" -msgid "Z" -msgstr "Z" +msgid "Load %3 as material %1 (This cannot be overridden)." +msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" -msgid "Jog Distance" -msgstr "Dystans Swobodnego Ruchu" +msgid "Change print core %1 from %2 to %3." +msgstr "Zmień rdzeń drukujący %1 z %2 na %3." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106 msgctxt "@label" -msgid "Send G-code" -msgstr "Wyślij G-code" +msgid "Change build plate to %1 (This cannot be overridden)." +msgstr "Zmień stół na %1 (Nie można nadpisać)." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319 -msgctxt "@tooltip of G-code command input" -msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." -msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113 +msgctxt "@label" +msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." +msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175 msgctxt "@label" -msgid "Extruder" -msgstr "Ekstruder" +msgid "Glass" +msgstr "Szkło" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70 -msgctxt "@tooltip" -msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154 +msgctxt "@label" +msgid "Aluminum" +msgstr "Aluminum" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105 -msgctxt "@tooltip" -msgid "The current temperature of this hotend." -msgstr "Aktualna temperatura tej głowicy." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 +msgctxt "@label" +msgid "Move to top" +msgstr "Przesuń na początek" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182 -msgctxt "@tooltip of temperature input" -msgid "The temperature to pre-heat the hotend to." -msgstr "Temperatura do wstępnego podgrzewania głowicy." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 +msgctxt "@label" +msgid "Delete" +msgstr "Usuń" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297 -msgctxt "@tooltip of pre-heat" -msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." -msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 +msgctxt "@label" +msgid "Resume" +msgstr "Ponów" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335 -msgctxt "@tooltip" -msgid "The colour of the material in this extruder." -msgstr "Kolor materiału w tym ekstruderze." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 +msgctxt "@label" +msgid "Pausing..." +msgstr "Zatrzymywanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367 -msgctxt "@tooltip" -msgid "The material in this extruder." -msgstr "Materiał w głowicy drukującej." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 +msgctxt "@label" +msgid "Resuming..." +msgstr "Przywracanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400 -msgctxt "@tooltip" -msgid "The nozzle inserted in this extruder." -msgstr "Dysza włożona do tego ekstrudera." +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:279 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:288 +msgctxt "@label" +msgid "Pause" +msgstr "Wstrzymaj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 -msgctxt "@title:window" -msgid "Open project file" -msgstr "Otwórz plik projektu" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 +msgctxt "@label" +msgid "Aborting..." +msgstr "Przerywanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83 -msgctxt "@text:window" -msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" -msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 +msgctxt "@label" +msgid "Abort" +msgstr "Anuluj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91 -msgctxt "@text:window" -msgid "Remember my choice" -msgstr "Zapamiętaj mój wybór" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142 +msgctxt "@label %1 is the name of a print job." +msgid "Are you sure you want to move %1 to the top of the queue?" +msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105 -msgctxt "@action:button" -msgid "Open as project" -msgstr "Otwórz jako projekt" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 +msgctxt "@window:title" +msgid "Move print job to top" +msgstr "Przesuń zadanie drukowania na początek" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110 -msgctxt "@action:button" -msgid "Import models" -msgstr "Importuj modele" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151 +msgctxt "@label %1 is the name of a print job." +msgid "Are you sure you want to delete %1?" +msgstr "Czy jesteś pewien, że chcesz usunąć %1?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 -msgctxt "@title:window" -msgid "Save Project" -msgstr "Zapisz projekt" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152 +msgctxt "@window:title" +msgid "Delete print job" +msgstr "Usuń zadanie drukowania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168 -msgctxt "@action:label" -msgid "Extruder %1" -msgstr "Ekstruder %1" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160 +msgctxt "@label %1 is the name of a print job." +msgid "Are you sure you want to abort %1?" +msgstr "Czy jesteś pewien, że chcesz anulować %1?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184 -msgctxt "@action:label" -msgid "%1 & material" -msgstr "%1 & materiał" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:326 +msgctxt "@window:title" +msgid "Abort print" +msgstr "Anuluj wydruk" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186 -msgctxt "@action:label" -msgid "Material" -msgstr "Materiał" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 +msgctxt "@label link to Connect and Cloud interfaces" +msgid "Manage printer" +msgstr "Zarządzaj drukarkami" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275 -msgctxt "@action:label" -msgid "Don't show project summary on save again" -msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239 +msgctxt "@info" +msgid "Please update your printer's firmware to manage the queue remotely." +msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289 -msgctxt "@action:button" -msgid "Save" -msgstr "Zapisz" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275 +msgctxt "@info" +msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637 -msgctxt "@title:window" -msgid "Open file(s)" -msgstr "Otwórz plik(i)" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335 +msgctxt "@label:status" +msgid "Loading..." +msgstr "Wczytywanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 -msgctxt "@text:window" -msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" -msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339 +msgctxt "@label:status" +msgid "Unavailable" +msgstr "Niedostępne" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 -msgctxt "@action:button" -msgid "Import all as models" -msgstr "Importuj wszystkie jako modele" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343 +msgctxt "@label:status" +msgid "Unreachable" +msgstr "Nieosiągalna" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15 -msgctxt "@title:window The argument is the application name." -msgid "About %1" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347 +msgctxt "@label:status" +msgid "Idle" +msgstr "Zajęta" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 +msgctxt "@label:status" +msgid "Preparing..." +msgstr "Przygotowyję..." + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 +msgctxt "@label:status" +msgid "Printing" +msgstr "Drukowanie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397 msgctxt "@label" -msgid "version: %1" -msgstr "version: %1" +msgid "Untitled" +msgstr "Bez tytułu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412 msgctxt "@label" -msgid "End-to-end solution for fused filament 3D printing." -msgstr "Kompletne rozwiązanie do druku przestrzennego." +msgid "Anonymous" +msgstr "Anonimowa" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85 -msgctxt "@info:credit" -msgid "" -"Cura is developed by Ultimaker B.V. in cooperation with the community.\n" -"Cura proudly uses the following open source projects:" -msgstr "" -"Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n" -"Cura z dumą korzysta z następujących projektów open source:" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433 +msgctxt "@label:status" +msgid "Requires configuration changes" +msgstr "Wymaga zmian konfiguracji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134 -msgctxt "@label" -msgid "Graphical user interface" -msgstr "Graficzny interfejs użytkownika" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447 +msgctxt "@action:button" +msgid "Details" +msgstr "Szczegóły" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" -msgid "Application framework" -msgstr "Struktura aplikacji" +msgid "Unavailable printer" +msgstr "Drukarka niedostępna" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" -msgid "G-code generator" -msgstr "Generator g-code" +msgid "First available" +msgstr "Pierwsza dostępna" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137 -msgctxt "@label" -msgid "Interprocess communication library" -msgstr "Biblioteka komunikacji międzyprocesowej" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 +msgctxt "@label:status" +msgid "Aborted" +msgstr "Anulowano" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139 -msgctxt "@label" -msgid "Programming language" -msgstr "Język programowania" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 +msgctxt "@label:status" +msgid "Finished" +msgstr "Zakończono" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140 -msgctxt "@label" -msgid "GUI framework" -msgstr "Framework GUI" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 +msgctxt "@label:status" +msgid "Aborting..." +msgstr "Przerywanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141 -msgctxt "@label" -msgid "GUI framework bindings" -msgstr "Powiązania Frameworka GUI" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 +msgctxt "@label:status" +msgid "Failed" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142 -msgctxt "@label" -msgid "C/C++ Binding library" -msgstr "Biblioteka Powiązań C/C++" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 +msgctxt "@label:status" +msgid "Pausing..." +msgstr "Zatrzymywanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143 -msgctxt "@label" -msgid "Data interchange format" -msgstr "Format wymiany danych" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 +msgctxt "@label:status" +msgid "Paused" +msgstr "Wstrzymana" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144 -msgctxt "@label" -msgid "Support library for scientific computing" -msgstr "Wsparcie biblioteki do obliczeń naukowych" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 +msgctxt "@label:status" +msgid "Resuming..." +msgstr "Przywracanie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145 -msgctxt "@label" -msgid "Support library for faster math" -msgstr "Wsparcie biblioteki dla szybszej matematyki" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 +msgctxt "@label:status" +msgid "Action required" +msgstr "Konieczne są działania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146 -msgctxt "@label" -msgid "Support library for handling STL files" -msgstr "Wsparcie biblioteki do obsługi plików STL" +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 +msgctxt "@label:status" +msgid "Finishes %1 at %2" +msgstr "Zakończone %1 z %2" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" -msgid "Support library for handling triangular meshes" -msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów" +msgid "Queued" +msgstr "W kolejce" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63 +msgctxt "@label link to connect manager" +msgid "Manage in browser" +msgstr "Zarządzaj w przeglądarce" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90 msgctxt "@label" -msgid "Support library for handling 3MF files" -msgstr "Wsparcie biblioteki do obsługi plików 3MF" +msgid "There are no print jobs in the queue. Slice and send a job to add one." +msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98 msgctxt "@label" -msgid "Support library for file metadata and streaming" -msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego" +msgid "Print jobs" +msgstr "Zadania druku" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107 msgctxt "@label" -msgid "Serial communication library" -msgstr "Biblioteka komunikacji szeregowej" +msgid "Total print time" +msgstr "Łączny czas druku" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116 msgctxt "@label" -msgid "ZeroConf discovery library" -msgstr "Bilbiotek poszukująca Zeroconf" +msgid "Waiting for" +msgstr "Oczekiwanie na" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 +msgctxt "@title:window" +msgid "Print over network" +msgstr "Drukuj przez sieć" + +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 +msgctxt "@action:button" +msgid "Print" +msgstr "Drukuj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" -msgid "Polygon clipping library" -msgstr "Biblioteka edytująca pola" +msgid "Printer selection" +msgstr "Wybór drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24 +msgctxt "@action:button" +msgid "Sign in" +msgstr "Zaloguj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:19 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" -msgid "Python bindings for Clipper" +msgid "Sign in to the Ultimaker platform" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154 -msgctxt "@Label" -msgid "Static type checker for Python" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:39 +msgctxt "@text" +msgid "" +"- Add material profiles and plug-ins from the Marketplace\n" +"- Back-up and sync your material profiles and plug-ins\n" +"- Share ideas and get help from 48,000+ users in the Ultimaker community" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156 -msgctxt "@Label" -msgid "Root Certificates for validating SSL trustworthiness" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:58 +msgctxt "@button" +msgid "Create a free Ultimaker account" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157 -msgctxt "@Label" -msgid "Python Error tracking library" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35 +msgctxt "@label" +msgid "Checking..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" -msgid "Polygon packing library, developed by Prusa Research" +msgid "Account synced" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:49 msgctxt "@label" -msgid "Python bindings for libnest2d" +msgid "Something went wrong..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160 -msgctxt "@label" -msgid "Support library for system keyring access" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:102 +msgctxt "@button" +msgid "Install pending updates" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161 -msgctxt "@label" -msgid "Python extensions for Microsoft Windows" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:123 +msgctxt "@button" +msgid "Check for account updates" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162 -msgctxt "@label" -msgid "Font" -msgstr "Czcionka" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:78 +msgctxt "@label The argument is a timestamp" +msgid "Last update: %1" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:107 +msgctxt "@button" +msgid "Ultimaker Account" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:126 +msgctxt "@button" +msgid "Sign Out" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" -msgid "SVG icons" -msgstr "Ikony SVG" +msgid "No time estimation available" +msgstr "Szacunkowy czas niedostępny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" -msgid "Linux cross-distribution application deployment" -msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux" +msgid "No cost estimation available" +msgstr "Szacunkowy koszt niedostępny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14 -msgctxt "@title:window" -msgid "Discard or Keep changes" -msgstr "Odrzuć lub zachowaj zmiany" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 +msgctxt "@button" +msgid "Preview" +msgstr "Podgląd" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50 -msgctxt "@text:window, %1 is a profile name" -msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 +msgctxt "@label" +msgid "Time estimation" +msgstr "Szacunkowy czas" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76 -msgctxt "@title:column" -msgid "Profile settings" -msgstr "Ustawienia profilu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:107 +msgctxt "@label" +msgid "Material estimation" +msgstr "Szacunkowy materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78 -msgctxt "@title:column" -msgid "Current changes" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:156 +msgctxt "@label m for meter" +msgid "%1m" +msgstr "%1m" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798 -msgctxt "@option:discardOrKeep" -msgid "Always ask me this" -msgstr "Zawsze pytaj o to" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:157 +msgctxt "@label g for grams" +msgid "%1g" +msgstr "%1g" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108 -msgctxt "@option:discardOrKeep" -msgid "Discard and never ask again" -msgstr "Odrzuć i nigdy nie pytaj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54 +msgctxt "@label:PrintjobStatus" +msgid "Slicing..." +msgstr "Cięcie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109 -msgctxt "@option:discardOrKeep" -msgid "Keep and never ask again" -msgstr "Zachowaj i nigdy nie pytaj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:78 +msgctxt "@label:PrintjobStatus" +msgid "Unable to slice" +msgstr "Nie można pociąć" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139 -msgctxt "@action:button" -msgid "Discard changes" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114 +msgctxt "@button" +msgid "Processing" +msgstr "Przetwarzanie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145 -msgctxt "@action:button" -msgid "Keep changes" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114 +msgctxt "@button" +msgid "Slice" +msgstr "Potnij" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:115 msgctxt "@label" -msgid "No items to select from" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 -msgctxt "@title:menu menubar:file" -msgid "Open File(s)..." -msgstr "" +msgid "Start the slicing process" +msgstr "Rozpocznij proces cięcia" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 -msgctxt "@title:menu menubar:file" -msgid "Open &Recent" -msgstr "Otwórz &ostatnio używane" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:132 +msgctxt "@button" +msgid "Cancel" +msgstr "Anuluj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:81 msgctxt "@action:inmenu" -msgid "Visible Settings" -msgstr "Widoczne Ustawienia" +msgid "Show Online Troubleshooting" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:88 msgctxt "@action:inmenu" -msgid "Collapse All Categories" -msgstr "" +msgid "Toggle Full Screen" +msgstr "Przełącz tryb pełnoekranowy" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:96 msgctxt "@action:inmenu" -msgid "Manage Setting Visibility..." -msgstr "Ustaw Widoczność Ustawień..." +msgid "Exit Full Screen" +msgstr "Wyłącz tryb pełnoekranowy" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34 -msgctxt "@title:menu" -msgid "&Material" -msgstr "&Materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:103 +msgctxt "@action:inmenu menubar:edit" +msgid "&Undo" +msgstr "&Cofnij" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49 -msgctxt "@action:inmenu" -msgid "Set as Active Extruder" -msgstr "Ustaw jako aktywną głowicę" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:113 +msgctxt "@action:inmenu menubar:edit" +msgid "&Redo" +msgstr "&Ponów" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55 -msgctxt "@action:inmenu" -msgid "Enable Extruder" -msgstr "Włącz Ekstruder" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:131 +msgctxt "@action:inmenu menubar:file" +msgid "&Quit" +msgstr "&Zamknij" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63 -msgctxt "@action:inmenu" -msgid "Disable Extruder" -msgstr "Wyłącz Ekstruder" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139 +msgctxt "@action:inmenu menubar:view" +msgid "3D View" +msgstr "Widok 3D" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13 -msgctxt "@label:category menu label" -msgid "Material" -msgstr "Materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146 +msgctxt "@action:inmenu menubar:view" +msgid "Front View" +msgstr "Widok z przodu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53 -msgctxt "@label:category menu label" -msgid "Favorites" -msgstr "Ulubione" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153 +msgctxt "@action:inmenu menubar:view" +msgid "Top View" +msgstr "Widok z góry" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78 -msgctxt "@label:category menu label" -msgid "Generic" -msgstr "Podstawowe" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160 +msgctxt "@action:inmenu menubar:view" +msgid "Bottom View" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14 -msgctxt "@title:menu menubar:toplevel" -msgid "&Help" -msgstr "P&omoc" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167 +msgctxt "@action:inmenu menubar:view" +msgid "Left Side View" +msgstr "Widok z lewej strony" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "&File" -msgstr "&Plik" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174 +msgctxt "@action:inmenu menubar:view" +msgid "Right Side View" +msgstr "Widok z prawej strony" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44 -msgctxt "@title:menu menubar:file" -msgid "&Save Project..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:188 +msgctxt "@action:inmenu" +msgid "Configure Cura..." +msgstr "Konfiguruj Cura..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77 -msgctxt "@title:menu menubar:file" -msgid "&Export..." -msgstr "&Eksportuj..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195 +msgctxt "@action:inmenu menubar:printer" +msgid "&Add Printer..." +msgstr "&Dodaj drukarkę..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88 -msgctxt "@action:inmenu menubar:file" -msgid "Export Selection..." -msgstr "Eksportuj Zaznaczenie..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:201 +msgctxt "@action:inmenu menubar:printer" +msgid "Manage Pr&inters..." +msgstr "Zarządzaj drukarkami..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21 -msgctxt "@title:menu menubar:toplevel" -msgid "P&references" -msgstr "Preferencje" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:208 +msgctxt "@action:inmenu" +msgid "Manage Materials..." +msgstr "Zarządzaj materiałami..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12 -msgctxt "@title:menu menubar:toplevel" -msgid "&Edit" -msgstr "&Edytuj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:216 +msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate." +msgid "Add more materials from Marketplace" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13 -msgctxt "@title:menu menubar:settings" -msgid "&Printer" -msgstr "&Drukarka" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:223 +msgctxt "@action:inmenu menubar:profile" +msgid "&Update profile with current settings/overrides" +msgstr "&Aktualizuj profil z bieżącymi ustawieniami" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17 -msgctxt "@label:category menu label" -msgid "Network enabled printers" -msgstr "Drukarki dostępne w sieci" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:231 +msgctxt "@action:inmenu menubar:profile" +msgid "&Discard current changes" +msgstr "&Odrzuć bieżące zmiany" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50 -msgctxt "@label:category menu label" -msgid "Local printers" -msgstr "Drukarki lokalne" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:243 +msgctxt "@action:inmenu menubar:profile" +msgid "&Create profile from current settings/overrides..." +msgstr "&Utwórz profil z bieżących ustawień..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "E&xtensions" -msgstr "&Rozszerzenia" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:249 +msgctxt "@action:inmenu menubar:profile" +msgid "Manage Profiles..." +msgstr "Zarządzaj profilami..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 -msgctxt "@header" -msgid "Configurations" -msgstr "Konfiguracje" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:257 +msgctxt "@action:inmenu menubar:help" +msgid "Show Online &Documentation" +msgstr "Pokaż dokumentację internetową" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 -msgctxt "@label" -msgid "Loading available configurations from the printer..." -msgstr "Ładowanie dostępnych konfiguracji z drukarki..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265 +msgctxt "@action:inmenu menubar:help" +msgid "Report a &Bug" +msgstr "Zgłoś błąd" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 -msgctxt "@label" -msgid "The configurations are not available because the printer is disconnected." -msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:273 +msgctxt "@action:inmenu menubar:help" +msgid "What's New" +msgstr "Co nowego" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 -msgctxt "@label" -msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." -msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:287 +msgctxt "@action:inmenu menubar:help" +msgid "About..." +msgstr "O..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 -msgctxt "@label" -msgid "Marketplace" -msgstr "Marketplace" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:294 +msgctxt "@action:inmenu menubar:edit" +msgid "Delete Selected" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101 -msgctxt "@tooltip" -msgid "The configuration of this extruder is not allowed, and prohibits slicing." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:304 +msgctxt "@action:inmenu menubar:edit" +msgid "Center Selected" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105 -msgctxt "@tooltip" -msgid "There are no profiles matching the configuration of this extruder." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:313 +msgctxt "@action:inmenu menubar:edit" +msgid "Multiply Selected" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245 -msgctxt "@label" -msgid "Select configuration" -msgstr "Wybierz konfigurację" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:322 +msgctxt "@action:inmenu" +msgid "Delete Model" +msgstr "Usuń model" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354 -msgctxt "@label" -msgid "Configurations" -msgstr "Konfiguracje" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:330 +msgctxt "@action:inmenu" +msgid "Ce&nter Model on Platform" +msgstr "Wyśrodkuj model na platformie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 -msgctxt "@header" -msgid "Custom" -msgstr "Niestandardowe" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:336 +msgctxt "@action:inmenu menubar:edit" +msgid "&Group Models" +msgstr "&Grupuj modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62 -msgctxt "@label" -msgid "Printer" -msgstr "Drukarka" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:356 +msgctxt "@action:inmenu menubar:edit" +msgid "Ungroup Models" +msgstr "Rozgrupuj modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214 -msgctxt "@label" -msgid "Enabled" -msgstr "Włączona" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:366 +msgctxt "@action:inmenu menubar:edit" +msgid "&Merge Models" +msgstr "Połącz modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263 -msgctxt "@label" -msgid "Material" -msgstr "Materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:376 +msgctxt "@action:inmenu" +msgid "&Multiply Model..." +msgstr "&Powiel model..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391 -msgctxt "@label" -msgid "Use glue for better adhesion with this material combination." -msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383 +msgctxt "@action:inmenu menubar:edit" +msgid "Select All Models" +msgstr "Wybierz wszystkie modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29 -msgctxt "@label" -msgid "Print Selected Model With:" -msgid_plural "Print Selected Models With:" -msgstr[0] "Wydrukuj wybrany model z:" -msgstr[1] "Wydrukuj wybrane modele z:" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:393 +msgctxt "@action:inmenu menubar:edit" +msgid "Clear Build Plate" +msgstr "Wyczyść stół" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92 -msgctxt "@title:window" -msgid "Multiply Selected Model" -msgid_plural "Multiply Selected Models" -msgstr[0] "Zduplikuj wybrany model" -msgstr[1] "Zduplikuj wybrane modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:403 +msgctxt "@action:inmenu menubar:file" +msgid "Reload All Models" +msgstr "Przeładuj wszystkie modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123 -msgctxt "@label" -msgid "Number of Copies" -msgstr "Liczba kopii" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412 +msgctxt "@action:inmenu menubar:edit" +msgid "Arrange All Models" +msgstr "Ułóż wszystkie modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 -msgctxt "@title:menu menubar:file" -msgid "Save Project..." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:420 +msgctxt "@action:inmenu menubar:edit" +msgid "Arrange Selection" +msgstr "Wybór ułożenia" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "&View" -msgstr "&Widok" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427 +msgctxt "@action:inmenu menubar:edit" +msgid "Reset All Model Positions" +msgstr "Zresetuj wszystkie pozycje modelu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17 -msgctxt "@action:inmenu menubar:view" -msgid "&Camera position" -msgstr "&Pozycja kamery" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434 +msgctxt "@action:inmenu menubar:edit" +msgid "Reset All Model Transformations" +msgstr "Zresetuj wszystkie przekształcenia modelu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30 -msgctxt "@action:inmenu menubar:view" -msgid "Camera view" -msgstr "Widok z kamery" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:443 +msgctxt "@action:inmenu menubar:file" +msgid "&Open File(s)..." +msgstr "&Otwórz plik(i)..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48 -msgctxt "@action:inmenu menubar:view" -msgid "Perspective" -msgstr "Perspektywiczny" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:453 +msgctxt "@action:inmenu menubar:file" +msgid "&New Project..." +msgstr "&Nowy projekt..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59 -msgctxt "@action:inmenu menubar:view" -msgid "Orthographic" -msgstr "Rzut ortograficzny" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:460 +msgctxt "@action:inmenu menubar:help" +msgid "Show Configuration Folder" +msgstr "Pokaż folder konfiguracji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50 -msgctxt "@label" -msgid "View type" -msgstr "Typ widoku" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:467 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:476 +msgctxt "@action:menu" +msgid "Configure setting visibility..." +msgstr "Skonfiguruj widoczność ustawień ..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64 -msgctxt "@label" -msgid "Sign in to the Ultimaker platform" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 +msgctxt "@label:button" +msgid "My printers" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39 -msgctxt "@text" -msgid "" -"- Add material profiles and plug-ins from the Marketplace\n" -"- Back-up and sync your material profiles and plug-ins\n" -"- Share ideas and get help from 48,000+ users in the Ultimaker community" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 +msgctxt "@tooltip:button" +msgid "Monitor printers in Ultimaker Digital Factory." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58 -msgctxt "@button" -msgid "Create a free Ultimaker account" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 +msgctxt "@tooltip:button" +msgid "Create print projects in Digital Library." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24 -msgctxt "@action:button" -msgid "Sign in" -msgstr "Zaloguj" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77 -msgctxt "@label The argument is a timestamp" -msgid "Last update: %1" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 +msgctxt "@label:button" +msgid "Print jobs" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104 -msgctxt "@button" -msgid "Ultimaker Account" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 +msgctxt "@tooltip:button" +msgid "Monitor print jobs and reprint from your print history." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120 -msgctxt "@button" -msgid "Sign Out" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 +msgctxt "@tooltip:button" +msgid "Extend Ultimaker Cura with plugins and material profiles." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28 -msgctxt "@label" -msgid "Checking..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 +msgctxt "@tooltip:button" +msgid "Become a 3D printing expert with Ultimaker e-learning." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35 -msgctxt "@label" -msgid "Account synced" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 +msgctxt "@label:button" +msgid "Ultimaker support" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42 -msgctxt "@label" -msgid "Something went wrong..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 +msgctxt "@tooltip:button" +msgid "Learn how to get started with Ultimaker Cura." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95 -msgctxt "@button" -msgid "Install pending updates" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 +msgctxt "@label:button" +msgid "Ask a question" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116 -msgctxt "@button" -msgid "Check for account updates" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 +msgctxt "@tooltip:button" +msgid "Consult the Ultimaker Community." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54 -msgctxt "@label:PrintjobStatus" -msgid "Slicing..." -msgstr "Cięcie..." - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81 -msgctxt "@label:PrintjobStatus" -msgid "Unable to slice" -msgstr "Nie można pociąć" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 -msgctxt "@button" -msgid "Processing" -msgstr "Przetwarzanie" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 -msgctxt "@button" -msgid "Slice" -msgstr "Potnij" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121 -msgctxt "@label" -msgid "Start the slicing process" -msgstr "Rozpocznij proces cięcia" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137 -msgctxt "@button" -msgid "Cancel" -msgstr "Anuluj" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 -msgctxt "@label" -msgid "Time estimation" -msgstr "Szacunkowy czas" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 -msgctxt "@label" -msgid "Material estimation" -msgstr "Szacunkowy materiał" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 -msgctxt "@label m for meter" -msgid "%1m" -msgstr "%1m" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 +msgctxt "@label:button" +msgid "Report a bug" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 -msgctxt "@label g for grams" -msgid "%1g" -msgstr "%1g" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 +msgctxt "@tooltip:button" +msgid "Let developers know that something is going wrong." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 -msgctxt "@label" -msgid "No time estimation available" -msgstr "Szacunkowy czas niedostępny" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 +msgctxt "@tooltip:button" +msgid "Visit the Ultimaker website." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:107 msgctxt "@label" -msgid "No cost estimation available" -msgstr "Szacunkowy koszt niedostępny" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 -msgctxt "@button" -msgid "Preview" -msgstr "Podgląd" +msgid "Hex" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:250 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:463 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Ogólny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 msgctxt "@title:tab" msgid "Settings" msgstr "Ustawienia" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:17 msgctxt "@title:tab" msgid "Printers" msgstr "Drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:470 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:472 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:57 msgctxt "@title:tab" msgid "Profiles" msgstr "Profile" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:589 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:590 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:599 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:637 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 +msgctxt "@title:window" +msgid "Open file(s)" +msgstr "Otwórz plik(i)" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:742 msgctxt "@window:title" msgid "Install Package" msgstr "Instaluj pakiety" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:749 msgctxt "@title:window" msgid "Open File(s)" msgstr "Otwórz plik(i)" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:751 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:831 msgctxt "@title:window" msgid "Add Printer" msgstr "Dodaj drukarkę" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:839 msgctxt "@title:window" msgid "What's New" msgstr "Co nowego" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 -msgctxt "@label:Should be short" -msgid "On" -msgstr "Wł" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 -msgctxt "@label:Should be short" -msgid "Off" -msgstr "Wył" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15 +msgctxt "@title:window The argument is the application name." +msgid "About %1" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" -msgid "Experimental" -msgstr "Eksperymentalne" +msgid "version: %1" +msgstr "version: %1" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" -msgid "Print settings" -msgstr "Ustawienia druku" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 -msgctxt "@label shown when we load a Gcode file" -msgid "Print setup disabled. G-code file can not be modified." -msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany." - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 -msgctxt "@button" -msgid "Recommended" -msgstr "Polecane" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 -msgctxt "@button" -msgid "Custom" -msgstr "Niestandardowe" +msgid "End-to-end solution for fused filament 3D printing." +msgstr "Kompletne rozwiązanie do druku przestrzennego." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 -msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" -msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" -msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" -msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale" -msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85 +msgctxt "@info:credit" +msgid "" +"Cura is developed by Ultimaker B.V. in cooperation with the community.\n" +"Cura proudly uses the following open source projects:" +msgstr "" +"Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n" +"Cura z dumą korzysta z następujących projektów open source:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" -msgid "Gradual infill" -msgstr "Stopniowe wypełnienie" +msgid "Graphical user interface" +msgstr "Graficzny interfejs użytkownika" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" -msgid "Gradual infill will gradually increase the amount of infill towards the top." -msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę." +msgid "Application framework" +msgstr "Struktura aplikacji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label" -msgid "Support" -msgstr "Podpory" +msgid "G-code generator" +msgstr "Generator g-code" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label" -msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." -msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania." +msgid "Interprocess communication library" +msgstr "Biblioteka komunikacji międzyprocesowej" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" -msgid "Profiles" -msgstr "Profile" +msgid "Python bindings for libnest2d" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80 -msgctxt "@tooltip" -msgid "You have modified some profile settings. If you want to change these go to custom mode." -msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141 +msgctxt "@label" +msgid "Polygon packing library, developed by Prusa Research" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" -msgid "Adhesion" -msgstr "Przyczepność" +msgid "Support library for handling 3MF files" +msgstr "Wsparcie biblioteki do obsługi plików 3MF" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" -msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." -msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku." +msgid "Support library for file metadata and streaming" +msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 -msgctxt "@label:header" -msgid "Custom profiles" -msgstr "Profile niestandardowe" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146 +msgctxt "@label" +msgid "Programming language" +msgstr "Język programowania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147 -msgctxt "@action:button" -msgid "Discard current changes" -msgstr "Odrzuć bieżące zmiany" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147 +msgctxt "@label" +msgid "GUI framework" +msgstr "Framework GUI" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" -msgid "Profile" -msgstr "Profil" +msgid "GUI framework bindings" +msgstr "Powiązania Frameworka GUI" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157 -msgctxt "@tooltip" -msgid "" -"Some setting/override values are different from the values stored in the profile.\n" -"\n" -"Click to open the profile manager." -msgstr "" -"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n" -"\n" -"Kliknij, aby otworzyć menedżer profili." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149 +msgctxt "@label" +msgid "C/C++ Binding library" +msgstr "Biblioteka Powiązań C/C++" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37 -msgctxt "@title:column" -msgid "Setting" -msgstr "Ustawienie" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150 +msgctxt "@label" +msgid "Data interchange format" +msgstr "Format wymiany danych" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38 -msgctxt "@title:column" -msgid "Profile" -msgstr "Profil" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151 +msgctxt "@label" +msgid "Font" +msgstr "Czcionka" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39 -msgctxt "@title:column" -msgid "Current" -msgstr "Aktualny" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154 +msgctxt "@label" +msgid "Polygon clipping library" +msgstr "Biblioteka edytująca pola" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40 -msgctxt "@title:column Unit of measurement" -msgid "Unit" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155 +msgctxt "@label" +msgid "JSON parser" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22 -msgctxt "@title:window" -msgid "Rename" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 +msgctxt "@label" +msgid "Utility functions, including an image loader" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23 -msgctxt "@info" -msgid "Please provide a new name." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 +msgctxt "@label" +msgid "Utility library, including Voronoi generation" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56 -msgctxt "@item:tooltip" -msgid "This setting has been hidden by the active machine and will not be visible." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161 +msgctxt "@label" +msgid "Root Certificates for validating SSL trustworthiness" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73 -msgctxt "@item:tooltip %1 is list of setting names" -msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." -msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." -msgstr[0] "" -msgstr[1] "" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13 -msgctxt "@title:tab" -msgid "Setting Visibility" -msgstr "Widoczność ustawienia" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131 -msgctxt "@action:button" -msgid "Defaults" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162 +msgctxt "@label" +msgid "Compatibility between Python 2 and 3" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53 -msgctxt "@label:textbox" -msgid "Check all" -msgstr "Zaznacz wszystko" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49 -msgctxt "@action:button" -msgid "Add New" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163 +msgctxt "@label" +msgid "Support library for system keyring access" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293 -msgctxt "@action:button" -msgid "Activate" -msgstr "Aktywuj" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330 -msgctxt "@action:button" -msgid "Rename" -msgstr "Zmień nazwę" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121 -msgctxt "@title:window" -msgid "Confirm Diameter Change" -msgstr "Potwierdź Zmianę Średnicy" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122 -msgctxt "@label (%1 is a number)" -msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" -msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164 +msgctxt "@label" +msgid "Support library for faster math" +msgstr "Wsparcie biblioteki dla szybszej matematyki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:165 msgctxt "@label" -msgid "Display Name" -msgstr "Wyświetlana nazwa" +msgid "Support library for handling STL files" +msgstr "Wsparcie biblioteki do obsługi plików STL" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:166 msgctxt "@label" -msgid "Brand" -msgstr "Marka" +msgid "Python bindings for Clipper" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:167 msgctxt "@label" -msgid "Material Type" -msgstr "Typ Materiału" +msgid "Serial communication library" +msgstr "Biblioteka komunikacji szeregowej" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:168 msgctxt "@label" -msgid "Color" -msgstr "Kolor" +msgid "Support library for scientific computing" +msgstr "Wsparcie biblioteki do obliczeń naukowych" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261 -msgctxt "@title" -msgid "Material color picker" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169 +msgctxt "@Label" +msgid "Python Error tracking library" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:170 msgctxt "@label" -msgid "Properties" -msgstr "Właściwości" +msgid "Support library for handling triangular meshes" +msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:171 msgctxt "@label" -msgid "Density" -msgstr "Gęstość" +msgid "ZeroConf discovery library" +msgstr "Bilbiotek poszukująca Zeroconf" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 msgctxt "@label" -msgid "Diameter" -msgstr "Średnica" +msgid "Universal build system configuration" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:175 msgctxt "@label" -msgid "Filament Cost" -msgstr "Koszt Filamentu" +msgid "Dependency and package manager" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:176 msgctxt "@label" -msgid "Filament weight" -msgstr "Waga filamentu" +msgid "Packaging Python-applications" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:177 msgctxt "@label" -msgid "Filament length" -msgstr "Długość Filamentu" +msgid "Linux cross-distribution application deployment" +msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:178 msgctxt "@label" -msgid "Cost per Meter" -msgstr "Koszt na metr" +msgid "Generating Windows installers" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464 -msgctxt "@label" -msgid "This material is linked to %1 and shares some of its properties." -msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 +msgctxt "@title:window" +msgid "Open project file" +msgstr "Otwórz plik projektu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471 -msgctxt "@label" -msgid "Unlink Material" -msgstr "Odłącz materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83 +msgctxt "@text:window" +msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" +msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484 -msgctxt "@label" -msgid "Description" -msgstr "Opis" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:90 +msgctxt "@text:window" +msgid "Remember my choice" +msgstr "Zapamiętaj mój wybór" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502 -msgctxt "@label" -msgid "Adhesion Information" -msgstr "Informacje dotyczące przyczepności" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:104 +msgctxt "@action:button" +msgid "Open as project" +msgstr "Otwórz jako projekt" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637 -msgctxt "@title" -msgid "Information" -msgstr "Informacja" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:109 +msgctxt "@action:button" +msgid "Import models" +msgstr "Importuj modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13 msgctxt "@title:window" -msgid "Sync materials with printers" -msgstr "" +msgid "Discard or Keep changes" +msgstr "Odrzuć lub zachowaj zmiany" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48 -msgctxt "@title:header" -msgid "Sync materials with printers" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:49 +msgctxt "@text:window, %1 is a profile name" +msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54 -msgctxt "@text" -msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:75 +msgctxt "@title:column" +msgid "Profile settings" +msgstr "Ustawienia profilu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76 -msgctxt "@button" -msgid "Why do I need to sync material profiles?" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:77 +msgctxt "@title:column" +msgid "Current changes" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85 -msgctxt "@button" -msgid "Start" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:104 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:799 +msgctxt "@option:discardOrKeep" +msgid "Always ask me this" +msgstr "Zawsze pytaj o to" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127 -msgctxt "@title:header" -msgid "Sign in" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:105 +msgctxt "@option:discardOrKeep" +msgid "Discard and never ask again" +msgstr "Odrzuć i nigdy nie pytaj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133 -msgctxt "@text" -msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:106 +msgctxt "@option:discardOrKeep" +msgid "Keep and never ask again" +msgstr "Zachowaj i nigdy nie pytaj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587 -msgctxt "@button" -msgid "Sync materials with USB" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:136 +msgctxt "@action:button" +msgid "Discard changes" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190 -msgctxt "@title:header" -msgid "The following printers will receive the new material profiles:" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:142 +msgctxt "@action:button" +msgid "Keep changes" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197 -msgctxt "@title:header" -msgid "Something went wrong when sending the materials to the printers." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 +msgctxt "@text:window" +msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" +msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204 -msgctxt "@title:header" -msgid "Material profiles successfully synced with the following printers:" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 +msgctxt "@action:button" +msgid "Import all as models" +msgstr "Importuj wszystkie jako modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429 -msgctxt "@button" -msgid "Troubleshooting" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 +msgctxt "@title:window" +msgid "Save Project" +msgstr "Zapisz projekt" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406 -msgctxt "@text Asking the user whether printers are missing in a list." -msgid "Printers missing?" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:175 +msgctxt "@action:label" +msgid "Extruder %1" +msgstr "Ekstruder %1" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408 -msgctxt "@text" -msgid "Make sure all your printers are turned ON and connected to Digital Factory." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 +msgctxt "@action:label" +msgid "%1 & material" +msgstr "%1 & materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417 -msgctxt "@button" -msgid "Refresh List" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193 +msgctxt "@action:label" +msgid "Material" +msgstr "Materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457 -msgctxt "@button" -msgid "Try again" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282 +msgctxt "@action:label" +msgid "Don't show project summary on save again" +msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 -msgctxt "@button" -msgid "Done" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296 +msgctxt "@action:button" +msgid "Save" +msgstr "Zapisz" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607 -msgctxt "@button" -msgid "Sync" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16 +msgctxt "@label %1 is filled in with the name of an extruder" +msgid "Print Selected Model with %1" +msgid_plural "Print Selected Models with %1" +msgstr[0] "Drukuj Wybrany Model z %1" +msgstr[1] "Drukuj Wybrane Modele z %1" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519 -msgctxt "@button" -msgid "Syncing" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:93 +msgctxt "@text Print job name" +msgid "Untitled" +msgstr "Bez tytułu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537 -msgctxt "@title:header" -msgid "No printers found" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 +msgctxt "@title:menu menubar:toplevel" +msgid "&Settings" +msgstr "Opcje" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558 -msgctxt "@text" -msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87 +msgctxt "@title:window" +msgid "New project" +msgstr "Nowy projekt" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570 -msgctxt "@button" -msgid "Learn how to connect your printer to Digital Factory" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88 +msgctxt "@info:question" +msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." +msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598 -msgctxt "@button" -msgid "Refresh" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135 +msgctxt "@action:button" +msgid "Marketplace" +msgstr "Marketplace" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627 -msgctxt "@title:header" -msgid "Sync material profiles via USB" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 +msgctxt "@header" +msgid "Configurations" +msgstr "Konfiguracje" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633 -msgctxt "@text In the UI this is followed by a list of steps the user needs to take." -msgid "Follow the following steps to load the new material profiles to your printer." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 +msgctxt "@label" +msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." +msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665 -msgctxt "@text" -msgid "Click the export material archive button." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 +msgctxt "@label" +msgid "Marketplace" +msgstr "Marketplace" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666 -msgctxt "@text" -msgid "Save the .umm file on a USB stick." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 +msgctxt "@label" +msgid "Loading available configurations from the printer..." +msgstr "Ładowanie dostępnych konfiguracji z drukarki..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667 -msgctxt "@text" -msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 +msgctxt "@label" +msgid "The configurations are not available because the printer is disconnected." +msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106 +msgctxt "@tooltip" +msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675 -msgctxt "@button" -msgid "How to load new material profiles to my printer" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110 +msgctxt "@tooltip" +msgid "There are no profiles matching the configuration of this extruder." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 -msgctxt "@button" -msgid "Back" -msgstr "Wstecz" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250 +msgctxt "@label" +msgid "Select configuration" +msgstr "Wybierz konfigurację" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 -msgctxt "@button" -msgid "Export material archive" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358 +msgctxt "@label" +msgid "Configurations" +msgstr "Konfiguracje" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 +msgctxt "@header" +msgid "Custom" +msgstr "Niestandardowe" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62 +msgctxt "@label" +msgid "Printer" +msgstr "Drukarka" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:217 +msgctxt "@label" +msgid "Enabled" +msgstr "Włączona" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:266 +msgctxt "@label" +msgid "Material" +msgstr "Materiał" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:392 +msgctxt "@label" +msgid "Use glue for better adhesion with this material combination." +msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:29 +msgctxt "@label" +msgid "Print Selected Model With:" +msgid_plural "Print Selected Models With:" +msgstr[0] "Wydrukuj wybrany model z:" +msgstr[1] "Wydrukuj wybrane modele z:" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" -msgid "Export All Materials" -msgstr "" +msgid "Multiply Selected Model" +msgid_plural "Multiply Selected Models" +msgstr[0] "Zduplikuj wybrany model" +msgstr[1] "Zduplikuj wybrane modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" -msgid "Materials compatible with active printer:" -msgstr "" +msgid "Number of Copies" +msgstr "Liczba kopii" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93 -msgctxt "@action:button" -msgid "Create new" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/EditMenu.qml:12 +msgctxt "@title:menu menubar:toplevel" +msgid "&Edit" +msgstr "&Edytuj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87 -msgctxt "@action:button" -msgid "Import" -msgstr "Importuj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ExtensionMenu.qml:13 +msgctxt "@title:menu menubar:toplevel" +msgid "E&xtensions" +msgstr "&Rozszerzenia" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101 -msgctxt "@action:button" -msgid "Sync with Printers" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 +msgctxt "@title:menu menubar:toplevel" +msgid "&File" +msgstr "&Plik" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:45 +msgctxt "@title:menu menubar:file" +msgid "&Save Project..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310 -msgctxt "@action:button" -msgid "Duplicate" -msgstr "Duplikuj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:78 +msgctxt "@title:menu menubar:file" +msgid "&Export..." +msgstr "&Eksportuj..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341 -msgctxt "@action:button" -msgid "Export" -msgstr "Eksportuj" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:89 +msgctxt "@action:inmenu menubar:file" +msgid "Export Selection..." +msgstr "Eksportuj Zaznaczenie..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386 -msgctxt "@title:window" -msgid "Confirm Remove" -msgstr "Potwierdź Usunięcie" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/HelpMenu.qml:14 +msgctxt "@title:menu menubar:toplevel" +msgid "&Help" +msgstr "P&omoc" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387 -msgctxt "@label (%1 is object name)" -msgid "Are you sure you wish to remove %1? This cannot be undone!" -msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13 +msgctxt "@label:category menu label" +msgid "Material" +msgstr "Materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238 -msgctxt "@title:window" -msgid "Import Material" -msgstr "Importuj Materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:53 +msgctxt "@label:category menu label" +msgid "Favorites" +msgstr "Ulubione" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242 -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Successfully imported material <filename>%1</filename>" -msgstr "Udało się zaimportować materiał <filename>%1</filename>" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:78 +msgctxt "@label:category menu label" +msgid "Generic" +msgstr "Podstawowe" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245 -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Could not import material <filename>%1</filename>: <message>%2</message>" -msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Open File(s)..." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265 -msgctxt "@title:window" -msgid "Export Material" -msgstr "Eksportuj Materiał" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PreferencesMenu.qml:21 +msgctxt "@title:menu menubar:toplevel" +msgid "P&references" +msgstr "Preferencje" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270 -msgctxt "@info:status Don't translate the XML tags <filename> and <message>!" -msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>" -msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:13 +msgctxt "@title:menu menubar:settings" +msgid "&Printer" +msgstr "&Drukarka" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273 -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Successfully exported material to <filename>%1</filename>" -msgstr "Udało się wyeksportować materiał do <filename>%1</filename>" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:17 +msgctxt "@label:category menu label" +msgid "Network enabled printers" +msgstr "Drukarki dostępne w sieci" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58 -msgctxt "@label" -msgid "Profiles compatible with active printer:" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:50 +msgctxt "@label:category menu label" +msgid "Local printers" +msgstr "Drukarki lokalne" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97 -msgctxt "@action:tooltip" -msgid "Create new profile from current settings/overrides" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Open &Recent" +msgstr "Otwórz &ostatnio używane" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124 -msgctxt "@action:label" -msgid "Some settings from current profile were overwritten." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Save Project..." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139 -msgctxt "@action:button" -msgid "Update profile." -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:34 +msgctxt "@title:menu" +msgid "&Material" +msgstr "&Materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142 -msgctxt "@action:tooltip" -msgid "Update profile with current settings/overrides" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49 +msgctxt "@action:inmenu" +msgid "Set as Active Extruder" +msgstr "Ustaw jako aktywną głowicę" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:55 +msgctxt "@action:inmenu" +msgid "Enable Extruder" +msgstr "Włącz Ekstruder" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:63 +msgctxt "@action:inmenu" +msgid "Disable Extruder" +msgstr "Wyłącz Ekstruder" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 +msgctxt "@action:inmenu" +msgid "Visible Settings" +msgstr "Widoczne Ustawienia" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 +msgctxt "@action:inmenu" +msgid "Collapse All Categories" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157 -msgctxt "@action:label" -msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." -msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 +msgctxt "@action:inmenu" +msgid "Manage Setting Visibility..." +msgstr "Ustaw Widoczność Ustawień..." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164 -msgctxt "@action:label" -msgid "Your current settings match the selected profile." -msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:13 +msgctxt "@title:menu menubar:toplevel" +msgid "&View" +msgstr "&Widok" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174 -msgctxt "@title:tab" -msgid "Global Settings" -msgstr "Ustawienia ogólne" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:17 +msgctxt "@action:inmenu menubar:view" +msgid "&Camera position" +msgstr "&Pozycja kamery" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277 -msgctxt "@title:window" -msgid "Create Profile" -msgstr "Stwórz profil" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:30 +msgctxt "@action:inmenu menubar:view" +msgid "Camera view" +msgstr "Widok z kamery" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279 -msgctxt "@info" -msgid "Please provide a name for this profile." -msgstr "Podaj nazwę tego profilu." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:48 +msgctxt "@action:inmenu menubar:view" +msgid "Perspective" +msgstr "Perspektywiczny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362 -msgctxt "@title:window" -msgid "Export Profile" -msgstr "Eksportuj Profil" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59 +msgctxt "@action:inmenu menubar:view" +msgid "Orthographic" +msgstr "Rzut ortograficzny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376 -msgctxt "@title:window" -msgid "Duplicate Profile" -msgstr "Duplikuj profil" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:115 +msgctxt "@label:MonitorStatus" +msgid "Not connected to a printer" +msgstr "Nie podłączono do drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403 -msgctxt "@title:window" -msgid "Rename Profile" -msgstr "Zmień nazwę profilu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119 +msgctxt "@label:MonitorStatus" +msgid "Printer does not accept commands" +msgstr "Drukarka nie akceptuje poleceń" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423 -msgctxt "@title:window" -msgid "Import Profile" -msgstr "Importuj Profil" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:129 +msgctxt "@label:MonitorStatus" +msgid "In maintenance. Please check the printer" +msgstr "W naprawie. Sprawdź drukarkę" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:140 +msgctxt "@label:MonitorStatus" +msgid "Lost connection with the printer" +msgstr "Utracone połączenie z drukarką" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:142 +msgctxt "@label:MonitorStatus" +msgid "Printing..." +msgstr "Drukowanie..." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:145 +msgctxt "@label:MonitorStatus" +msgid "Paused" +msgstr "Wstrzymano" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:148 +msgctxt "@label:MonitorStatus" +msgid "Preparing..." +msgstr "Przygotowywanie ..." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:150 +msgctxt "@label:MonitorStatus" +msgid "Please remove the print" +msgstr "Usuń wydruk" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:318 +msgctxt "@label" +msgid "Abort Print" +msgstr "Anuluj Wydruk" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:327 +msgctxt "@label" +msgid "Are you sure you want to abort the print?" +msgstr "Czy na pewno chcesz przerwać drukowanie?" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:109 +msgctxt "@label" +msgid "Is printed as support." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:112 +msgctxt "@label" +msgid "Other models overlapping with this model are modified." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:115 +msgctxt "@label" +msgid "Infill overlapping with this model is modified." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118 +msgctxt "@label" +msgid "Overlaps with this model are not supported." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:125 +msgctxt "@label %1 is the number of settings it overrides." +msgid "Overrides %1 setting." +msgid_plural "Overrides %1 settings." +msgstr[0] "" +msgstr[1] "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59 +msgctxt "@label" +msgid "Object list" +msgstr "Lista obiektów" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:131 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:24 +msgctxt "@action:button" +msgid "Defaults" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:169 msgctxt "@label" msgid "Interface" msgstr "Interfejs" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:212 msgctxt "@heading" msgid "-- incomplete --" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:258 msgctxt "@label" msgid "Currency:" msgstr "Waluta:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:274 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Tnij automatycznie podczas zmiany ustawień." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:328 msgctxt "@option:check" msgid "Slice automatically" msgstr "Automatyczne Cięcie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:337 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:352 msgctxt "@label" msgid "Viewport behavior" msgstr "Zachowanie okna edycji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:369 msgctxt "@option:check" msgid "Display overhang" msgstr "Wyświetl zwis" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388 msgctxt "@option:check" msgid "Display model errors" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:396 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:401 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Odwróć kierunek zoomu kamery." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:437 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Przybliżaj w kierunku myszy" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:468 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Upewnij się, że modele są oddzielone" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:477 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:482 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Automatycznie upuść modele na stół roboczy" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:494 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Wiadomość ostrzegawcza w czytniku g-code" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:511 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:526 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531 msgctxt "@option:check" msgid "Restore window position on start" msgstr "Przywróć pozycję okna przy starcie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:541 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Jakiego rodzaju kamery należy użyć do renderowania?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:548 msgctxt "@window:text" msgid "Camera rendering:" msgstr "Renderowanie z kamery:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:555 msgid "Perspective" msgstr "Perspektywiczny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:556 msgid "Orthographic" msgstr "Rzut ortograficzny" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596 msgctxt "@label" msgid "Opening and saving files" msgstr "Otwieranie i zapisywanie plików" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:603 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:608 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:625 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:640 msgctxt "@option:check" msgid "Scale large models" msgstr "Skaluj duże modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:650 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:655 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Skaluj bardzo małe modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:665 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:670 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Zaznaczaj modele po załadowaniu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Dodaj przedrostek maszyny do nazwy zadania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:695 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:699 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Domyślne zachowanie podczas otwierania pliku projektu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:717 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Domyślne zachowanie podczas otwierania pliku projektu: " -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:732 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Zawsze pytaj" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Zawsze otwieraj jako projekt" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:734 msgctxt "@option:openProject" msgid "Always import models" msgstr "Zawsze importuj modele" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:36 +msgctxt "@label" +msgid "Profiles" +msgstr "Profile" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:785 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: " -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:800 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Zawsze odrzucaj wprowadzone zmiany" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:801 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:835 msgctxt "@label" msgid "Privacy" msgstr "Prywatność" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:841 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:846 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Wyślij (anonimowe) informacje o drukowaniu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:876 msgctxt "@label" msgid "Updates" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:883 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:888 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:904 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:910 msgctxt "@option:radio" msgid "Stable releases only" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:920 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:926 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:936 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:941 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:50 +msgctxt "@action:button" +msgid "Add New" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:134 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:294 +msgctxt "@action:button" +msgid "Activate" +msgstr "Aktywuj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:146 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:331 +msgctxt "@action:button" +msgid "Rename" +msgstr "Zmień nazwę" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" -msgid "Add printer by IP address" -msgstr "Dodaj drukarkę przez IP" +msgid "Materials compatible with active printer:" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:94 +msgctxt "@action:button" +msgid "Create new" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:88 +msgctxt "@action:button" +msgid "Import" +msgstr "Importuj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101 +msgctxt "@action:button" +msgid "Sync with Printers" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:311 +msgctxt "@action:button" +msgid "Duplicate" +msgstr "Duplikuj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:342 +msgctxt "@action:button" +msgid "Export" +msgstr "Eksportuj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:392 +msgctxt "@title:window" +msgid "Confirm Remove" +msgstr "Potwierdź Usunięcie" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:393 +msgctxt "@label (%1 is object name)" +msgid "Are you sure you wish to remove %1? This cannot be undone!" +msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238 +msgctxt "@title:window" +msgid "Import Material" +msgstr "Importuj Materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242 +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Successfully imported material <filename>%1</filename>" +msgstr "Udało się zaimportować materiał <filename>%1</filename>" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245 +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Could not import material <filename>%1</filename>: <message>%2</message>" +msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:267 +msgctxt "@title:window" +msgid "Export Material" +msgstr "Eksportuj Materiał" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:272 +msgctxt "@info:status Don't translate the XML tags <filename> and <message>!" +msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>" +msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:275 +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Successfully exported material to <filename>%1</filename>" +msgstr "Udało się wyeksportować materiał do <filename>%1</filename>" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18 +msgctxt "@title:window" +msgid "Sync materials with printers" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49 +msgctxt "@title:header" +msgid "Sync materials with printers" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55 msgctxt "@text" -msgid "Enter your printer's IP address." +msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77 msgctxt "@button" -msgid "Add" -msgstr "Dodaj" +msgid "Why do I need to sync material profiles?" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 -msgctxt "@label" -msgid "Could not connect to device." -msgstr "Nie można połączyć się z urządzeniem." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86 +msgctxt "@button" +msgid "Start" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 -msgctxt "@label" -msgid "Can't connect to your Ultimaker printer?" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:128 +msgctxt "@title:header" +msgid "Sign in" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 -msgctxt "@label" -msgid "The printer at this address has not responded yet." -msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:134 +msgctxt "@text" +msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 -msgctxt "@label" -msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." -msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:158 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:586 +msgctxt "@button" +msgid "Sync materials with USB" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:191 +msgctxt "@title:header" +msgid "The following printers will receive the new material profiles:" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:198 +msgctxt "@title:header" +msgid "Something went wrong when sending the materials to the printers." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:205 +msgctxt "@title:header" +msgid "Material profiles successfully synced with the following printers:" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429 msgctxt "@button" -msgid "Connect" -msgstr "Połącz" +msgid "Troubleshooting" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 -msgctxt "@label" -msgid "Release Notes" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406 +msgctxt "@text Asking the user whether printers are missing in a list." +msgid "Printers missing?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 -msgctxt "@label" -msgid "User Agreement" -msgstr "Umowa z użytkownikiem" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408 +msgctxt "@text" +msgid "Make sure all your printers are turned ON and connected to Digital Factory." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417 msgctxt "@button" -msgid "Agree" -msgstr "Zgadzam się" +msgid "Refresh List" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457 msgctxt "@button" -msgid "Decline and close" -msgstr "Odrzuć i zamknij" +msgid "Try again" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29 -msgctxt "@label" -msgid "What's New" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696 +msgctxt "@button" +msgid "Done" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:606 msgctxt "@button" -msgid "Next" -msgstr "Dalej" +msgid "Sync" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 -msgctxt "@label" -msgid "Add a Cloud printer" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519 +msgctxt "@button" +msgid "Syncing" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 -msgctxt "@label" -msgid "Waiting for Cloud response" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537 +msgctxt "@title:header" +msgid "No printers found" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 -msgctxt "@label" -msgid "No printers found in your account?" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558 +msgctxt "@text" +msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 -msgctxt "@label" -msgid "The following printers in your account have been added in Cura:" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:569 +msgctxt "@button" +msgid "Learn how to connect your printer to Digital Factory" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:597 msgctxt "@button" -msgid "Add printer manually" +msgid "Refresh" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:626 +msgctxt "@title:header" +msgid "Sync material profiles via USB" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:632 +msgctxt "@text In the UI this is followed by a list of steps the user needs to take." +msgid "Follow the following steps to load the new material profiles to your printer." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:663 msgctxt "@text" -msgid "Add material settings and plugins from the Marketplace" +msgid "Click the export material archive button." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:664 msgctxt "@text" -msgid "Backup and sync your material settings and plugins" +msgid "Save the .umm file on a USB stick." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665 msgctxt "@text" -msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" +msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:673 msgctxt "@button" -msgid "Skip" +msgid "How to load new material profiles to my printer" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214 -msgctxt "@text" -msgid "Create a free Ultimaker Account" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:687 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:299 +msgctxt "@button" +msgid "Back" +msgstr "Wstecz" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 -msgctxt "@label" -msgid "Welcome to Ultimaker Cura" -msgstr "Witaj w Ultimaker Cura" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696 +msgctxt "@button" +msgid "Export material archive" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68 -msgctxt "@text" -msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:731 +msgctxt "@title:window" +msgid "Export All Materials" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86 -msgctxt "@button" -msgid "Get started" -msgstr "Rozpocznij" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121 +msgctxt "@title:window" +msgid "Confirm Diameter Change" +msgstr "Potwierdź Zmianę Średnicy" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122 +msgctxt "@label (%1 is a number)" +msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" +msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" -msgid "Empty" -msgstr "Pusty" +msgid "Display Name" +msgstr "Wyświetlana nazwa" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" -msgid "Manufacturer" -msgstr "Producent" +msgid "Brand" +msgstr "Marka" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" -msgid "Profile author" -msgstr "" +msgid "Material Type" +msgstr "Typ Materiału" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" -msgid "Printer name" -msgstr "Nazwa drukarki" +msgid "Color" +msgstr "Kolor" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 -msgctxt "@text" -msgid "Please name your printer" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:262 +msgctxt "@title" +msgid "Material color picker" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275 msgctxt "@label" -msgid "Add a printer" -msgstr "Dodaj drukarkę" +msgid "Properties" +msgstr "Właściwości" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:286 msgctxt "@label" -msgid "Add a networked printer" -msgstr "Dodaj drukarkę sieciową" +msgid "Density" +msgstr "Gęstość" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:319 msgctxt "@label" -msgid "Add a non-networked printer" -msgstr "Dodaj drukarkę niesieciową" +msgid "Diameter" +msgstr "Średnica" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:369 msgctxt "@label" -msgid "There is no printer found over your network." -msgstr "Nie znaleziono drukarki w Twojej sieci." +msgid "Filament Cost" +msgstr "Koszt Filamentu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:401 msgctxt "@label" -msgid "Refresh" -msgstr "Odśwież" +msgid "Filament weight" +msgstr "Waga filamentu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:433 msgctxt "@label" -msgid "Add printer by IP" -msgstr "Dodaj drukarkę przez IP" +msgid "Filament length" +msgstr "Długość Filamentu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:451 msgctxt "@label" -msgid "Add cloud printer" -msgstr "" +msgid "Cost per Meter" +msgstr "Koszt na metr" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:465 msgctxt "@label" -msgid "Troubleshooting" -msgstr "Rozwiązywanie problemów" +msgid "This material is linked to %1 and shares some of its properties." +msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:472 msgctxt "@label" -msgid "Help us to improve Ultimaker Cura" -msgstr "Pomóż nam ulepszyć Ultimaker Cura" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 -msgctxt "@text" -msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" -msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:" +msgid "Unlink Material" +msgstr "Odłącz materiał" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 -msgctxt "@text" -msgid "Machine types" -msgstr "Typy maszyn" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:485 +msgctxt "@label" +msgid "Description" +msgstr "Opis" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 -msgctxt "@text" -msgid "Material usage" -msgstr "Zużycie materiału" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:503 +msgctxt "@label" +msgid "Adhesion Information" +msgstr "Informacje dotyczące przyczepności" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 -msgctxt "@text" -msgid "Number of slices" -msgstr "Ilość warstw" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642 +msgctxt "@title" +msgid "Information" +msgstr "Informacja" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 -msgctxt "@text" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:647 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:82 +msgctxt "@label" msgid "Print settings" msgstr "Ustawienia druku" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 -msgctxt "@text" -msgid "Data collected by Ultimaker Cura will not contain any personal information." -msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:59 +msgctxt "@label" +msgid "Profiles compatible with active printer:" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 -msgctxt "@text" -msgid "More information" -msgstr "Więcej informacji" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:98 +msgctxt "@action:tooltip" +msgid "Create new profile from current settings/overrides" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59 -msgctxt "@label" -msgid "Object list" -msgstr "Lista obiektów" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:125 +msgctxt "@action:label" +msgid "Some settings from current profile were overwritten." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109 -msgctxt "@label" -msgid "Is printed as support." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:140 +msgctxt "@action:button" +msgid "Update profile." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112 -msgctxt "@label" -msgid "Other models overlapping with this model are modified." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:143 +msgctxt "@action:tooltip" +msgid "Update profile with current settings/overrides" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115 -msgctxt "@label" -msgid "Infill overlapping with this model is modified." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:148 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256 +msgctxt "@action:button" +msgid "Discard current changes" +msgstr "Odrzuć bieżące zmiany" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:158 +msgctxt "@action:label" +msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." +msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:165 +msgctxt "@action:label" +msgid "Your current settings match the selected profile." +msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:175 +msgctxt "@title:tab" +msgid "Global Settings" +msgstr "Ustawienia ogólne" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 +msgctxt "@title:window" +msgid "Create Profile" +msgstr "Stwórz profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:280 +msgctxt "@info" +msgid "Please provide a name for this profile." +msgstr "Podaj nazwę tego profilu." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:352 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:368 +msgctxt "@title:window" +msgid "Export Profile" +msgstr "Eksportuj Profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:382 +msgctxt "@title:window" +msgid "Duplicate Profile" +msgstr "Duplikuj profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:409 +msgctxt "@title:window" +msgid "Rename Profile" +msgstr "Zmień nazwę profilu" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:422 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:429 +msgctxt "@title:window" +msgid "Import Profile" +msgstr "Importuj Profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:22 +msgctxt "@title:window" +msgid "Rename" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118 -msgctxt "@label" -msgid "Overlaps with this model are not supported." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:23 +msgctxt "@info" +msgid "Please provide a new name." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125 -msgctxt "@label %1 is the number of settings it overrides." -msgid "Overrides %1 setting." -msgid_plural "Overrides %1 settings." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56 +msgctxt "@item:tooltip" +msgid "This setting has been hidden by the active machine and will not be visible." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73 +msgctxt "@item:tooltip %1 is list of setting names" +msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." +msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "" msgstr[1] "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13 +msgctxt "@title:tab" +msgid "Setting Visibility" +msgstr "Widoczność ustawienia" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:55 +msgctxt "@label:textbox" +msgid "Check all" +msgstr "Zaznacz wszystko" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" -msgid "Connected printers" -msgstr "Podłączone drukarki" +msgid "Extruder" +msgstr "Ekstruder" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70 +msgctxt "@tooltip" +msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." +msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105 +msgctxt "@tooltip" +msgid "The current temperature of this hotend." +msgstr "Aktualna temperatura tej głowicy." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182 +msgctxt "@tooltip of temperature input" +msgid "The temperature to pre-heat the hotend to." +msgstr "Temperatura do wstępnego podgrzewania głowicy." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259 +msgctxt "@button Cancel pre-heating" +msgid "Cancel" +msgstr "Anuluj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263 +msgctxt "@button" +msgid "Pre-heat" +msgstr "Podgrzewanie wstępne" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297 +msgctxt "@tooltip of pre-heat" +msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." +msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335 +msgctxt "@tooltip" +msgid "The colour of the material in this extruder." +msgstr "Kolor materiału w tym ekstruderze." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367 +msgctxt "@tooltip" +msgid "The material in this extruder." +msgstr "Materiał w głowicy drukującej." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400 +msgctxt "@tooltip" +msgid "The nozzle inserted in this extruder." +msgstr "Dysza włożona do tego ekstrudera." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" -msgid "Preset printers" -msgstr "Zdefiniowane drukarki" +msgid "Build plate" +msgstr "Stół roboczy" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55 +msgctxt "@tooltip" +msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." +msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 +msgctxt "@tooltip" +msgid "The current temperature of the heated bed." +msgstr "Bieżąca temperatura podgrzewanego stołu." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162 +msgctxt "@tooltip of temperature input" +msgid "The temperature to pre-heat the bed to." +msgstr "Temperatura do wstępnego podgrzewania stołu." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286 +msgctxt "@tooltip of pre-heat" +msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." +msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51 +msgctxt "@label" +msgid "Printer control" +msgstr "Kontrola drukarką" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66 +msgctxt "@label" +msgid "Jog Position" +msgstr "Pozycja Swobodnego Ruchu" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82 +msgctxt "@label" +msgid "X/Y" +msgstr "X/Y" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162 +msgctxt "@label" +msgid "Z" +msgstr "Z" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217 +msgctxt "@label" +msgid "Jog Distance" +msgstr "Dystans Swobodnego Ruchu" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 +msgctxt "@label" +msgid "Send G-code" +msgstr "Wyślij G-code" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319 +msgctxt "@tooltip of G-code command input" +msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." +msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 +msgctxt "@info:status" +msgid "The printer is not connected." +msgstr "Drukarka nie jest podłączona." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:235 msgctxt "@button" msgid "Add printer" msgstr "Dodaj drukarkę" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252 msgctxt "@button" msgid "Manage printers" msgstr "Zarządzaj drukarkami" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17 -msgctxt "@placeholder" -msgid "Search" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156 +msgctxt "@label" +msgid "Active print" +msgstr "Aktywny wydruk" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164 +msgctxt "@label" +msgid "Job Name" +msgstr "Nazwa pracy" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:172 +msgctxt "@label" +msgid "Printing Time" +msgstr "Czas druku" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:180 +msgctxt "@label" +msgid "Estimated time left" +msgstr "Szacowany czas pozostały" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 +msgctxt "@label" +msgid "Profile" +msgstr "Profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:145 +msgctxt "@tooltip" +msgid "" +"Some setting/override values are different from the values stored in the profile.\n" +"\n" +"Click to open the profile manager." msgstr "" +"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n" +"\n" +"Kliknij, aby otworzyć menedżer profili." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93 -msgctxt "@text Print job name" -msgid "Untitled" -msgstr "Bez tytułu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 +msgctxt "@label:header" +msgid "Custom profiles" +msgstr "Profile niestandardowe" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115 -msgctxt "@label:MonitorStatus" -msgid "Not connected to a printer" -msgstr "Nie podłączono do drukarki" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20 +msgctxt "@label shown when we load a Gcode file" +msgid "Print setup disabled. G-code file can not be modified." +msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119 -msgctxt "@label:MonitorStatus" -msgid "Printer does not accept commands" -msgstr "Drukarka nie akceptuje poleceń" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:142 +msgctxt "@button" +msgid "Recommended" +msgstr "Polecane" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129 -msgctxt "@label:MonitorStatus" -msgid "In maintenance. Please check the printer" -msgstr "W naprawie. Sprawdź drukarkę" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:156 +msgctxt "@button" +msgid "Custom" +msgstr "Niestandardowe" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140 -msgctxt "@label:MonitorStatus" -msgid "Lost connection with the printer" -msgstr "Utracone połączenie z drukarką" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 +msgctxt "@label:Should be short" +msgid "On" +msgstr "Wł" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142 -msgctxt "@label:MonitorStatus" -msgid "Printing..." -msgstr "Drukowanie..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 +msgctxt "@label:Should be short" +msgid "Off" +msgstr "Wył" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145 -msgctxt "@label:MonitorStatus" -msgid "Paused" -msgstr "Wstrzymano" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34 +msgctxt "@label" +msgid "Experimental" +msgstr "Eksperymentalne" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148 -msgctxt "@label:MonitorStatus" -msgid "Preparing..." -msgstr "Przygotowywanie ..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:54 +msgctxt "@info" +msgid "custom profile is active and you overwrote some settings." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150 -msgctxt "@label:MonitorStatus" -msgid "Please remove the print" -msgstr "Usuń wydruk" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:68 +msgctxt "@info" +msgid "custom profile is overriding some settings." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:79 +msgctxt "@info" +msgid "Some settings were changed." +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27 msgctxt "@label" -msgid "Abort Print" -msgstr "Anuluj Wydruk" +msgid "Adhesion" +msgstr "Przyczepność" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72 msgctxt "@label" -msgid "Are you sure you want to abort the print?" -msgstr "Czy na pewno chcesz przerwać drukowanie?" +msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." +msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:198 msgctxt "@label" -msgid "" -"Some hidden settings use values different from their normal calculated value.\n" -"\n" -"Click to make these settings visible." +msgid "Gradual infill" +msgstr "Stopniowe wypełnienie" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:236 +msgctxt "@label" +msgid "Gradual infill will gradually increase the amount of infill towards the top." +msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:26 +msgctxt "@label" +msgid "Resolution" msgstr "" -"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n" -"\n" -"Kliknij, aby te ustawienia były widoczne." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47 -msgctxt "@label:textbox" -msgid "Search settings" -msgstr "Ustawienia wyszukiwania" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28 +msgctxt "@label" +msgid "Support" +msgstr "Podpory" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428 -msgctxt "@action:menu" -msgid "Copy value to all extruders" -msgstr "Skopiuj wartość do wszystkich ekstruderów" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69 +msgctxt "@label" +msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." +msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437 -msgctxt "@action:menu" -msgid "Copy all changed values to all extruders" -msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31 +msgctxt "@error" +msgid "Configuration not supported" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473 -msgctxt "@action:menu" -msgid "Hide this setting" -msgstr "Ukryj tę opcję" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39 +msgctxt "@message:text %1 is the name the printer uses for 'nozzle'." +msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration." +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486 -msgctxt "@action:menu" -msgid "Don't show this setting" -msgstr "Nie pokazuj tej opcji" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47 +msgctxt "@button:label" +msgid "Learn more" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490 -msgctxt "@action:menu" -msgid "Keep this setting visible" -msgstr "Pozostaw tę opcję widoczną" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:36 +msgctxt "@title:column" +msgid "Setting" +msgstr "Ustawienie" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509 -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467 -msgctxt "@action:menu" -msgid "Configure setting visibility..." -msgstr "Skonfiguruj widoczność ustawień ..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:37 +msgctxt "@title:column" +msgid "Profile" +msgstr "Profil" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:38 +msgctxt "@title:column" +msgid "Current" +msgstr "Aktualny" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:39 +msgctxt "@title:column Unit of measurement" +msgid "Unit" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/SearchBar.qml:17 +msgctxt "@placeholder" +msgid "Search" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:115 +msgctxt "@label" +msgid "" +"Some hidden settings use values different from their normal calculated value.\n" +"\n" +"Click to make these settings visible." +msgstr "" +"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n" +"\n" +"Kliknij, aby te ustawienia były widoczne." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:84 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:89 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Wpływać" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:94 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Pod wpływem" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:190 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:194 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:234 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" @@ -5620,7 +5774,7 @@ msgstr "" "\n" "Kliknij, aby przywrócić wartość z profilu." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:334 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" @@ -5631,365 +5785,381 @@ msgstr "" "\n" "Kliknij, aby przywrócić wartość obliczoną." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104 -msgctxt "@label" -msgid "Hex" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156 -msgctxt "@label" -msgid "Active print" -msgstr "Aktywny wydruk" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164 -msgctxt "@label" -msgid "Job Name" -msgstr "Nazwa pracy" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172 -msgctxt "@label" -msgid "Printing Time" -msgstr "Czas druku" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180 -msgctxt "@label" -msgid "Estimated time left" -msgstr "Szacowany czas pozostały" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81 -msgctxt "@action:inmenu" -msgid "Show Online Troubleshooting" -msgstr "" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:48 +msgctxt "@label:textbox" +msgid "Search settings" +msgstr "Ustawienia wyszukiwania" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88 -msgctxt "@action:inmenu" -msgid "Toggle Full Screen" -msgstr "Przełącz tryb pełnoekranowy" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:395 +msgctxt "@action:menu" +msgid "Copy value to all extruders" +msgstr "Skopiuj wartość do wszystkich ekstruderów" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96 -msgctxt "@action:inmenu" -msgid "Exit Full Screen" -msgstr "Wyłącz tryb pełnoekranowy" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:404 +msgctxt "@action:menu" +msgid "Copy all changed values to all extruders" +msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103 -msgctxt "@action:inmenu menubar:edit" -msgid "&Undo" -msgstr "&Cofnij" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:440 +msgctxt "@action:menu" +msgid "Hide this setting" +msgstr "Ukryj tę opcję" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113 -msgctxt "@action:inmenu menubar:edit" -msgid "&Redo" -msgstr "&Ponów" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:453 +msgctxt "@action:menu" +msgid "Don't show this setting" +msgstr "Nie pokazuj tej opcji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131 -msgctxt "@action:inmenu menubar:file" -msgid "&Quit" -msgstr "&Zamknij" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:457 +msgctxt "@action:menu" +msgid "Keep this setting visible" +msgstr "Pozostaw tę opcję widoczną" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139 -msgctxt "@action:inmenu menubar:view" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:25 +msgctxt "@info:tooltip" msgid "3D View" msgstr "Widok 3D" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146 -msgctxt "@action:inmenu menubar:view" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:38 +msgctxt "@info:tooltip" msgid "Front View" msgstr "Widok z przodu" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153 -msgctxt "@action:inmenu menubar:view" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:51 +msgctxt "@info:tooltip" msgid "Top View" msgstr "Widok z góry" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160 -msgctxt "@action:inmenu menubar:view" -msgid "Bottom View" -msgstr "" - -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167 -msgctxt "@action:inmenu menubar:view" -msgid "Left Side View" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:64 +msgctxt "@info:tooltip" +msgid "Left View" msgstr "Widok z lewej strony" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174 -msgctxt "@action:inmenu menubar:view" -msgid "Right Side View" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:77 +msgctxt "@info:tooltip" +msgid "Right View" msgstr "Widok z prawej strony" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188 -msgctxt "@action:inmenu" -msgid "Configure Cura..." -msgstr "Konfiguruj Cura..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50 +msgctxt "@label" +msgid "View type" +msgstr "Typ widoku" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195 -msgctxt "@action:inmenu menubar:printer" -msgid "&Add Printer..." -msgstr "&Dodaj drukarkę..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 +msgctxt "@label" +msgid "Add a Cloud printer" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201 -msgctxt "@action:inmenu menubar:printer" -msgid "Manage Pr&inters..." -msgstr "Zarządzaj drukarkami..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73 +msgctxt "@label" +msgid "Waiting for Cloud response" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208 -msgctxt "@action:inmenu" -msgid "Manage Materials..." -msgstr "Zarządzaj materiałami..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:83 +msgctxt "@label" +msgid "No printers found in your account?" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216 -msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate." -msgid "Add more materials from Marketplace" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:117 +msgctxt "@label" +msgid "The following printers in your account have been added in Cura:" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223 -msgctxt "@action:inmenu menubar:profile" -msgid "&Update profile with current settings/overrides" -msgstr "&Aktualizuj profil z bieżącymi ustawieniami" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:186 +msgctxt "@button" +msgid "Add printer manually" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231 -msgctxt "@action:inmenu menubar:profile" -msgid "&Discard current changes" -msgstr "&Odrzuć bieżące zmiany" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +msgctxt "@label" +msgid "Manufacturer" +msgstr "Producent" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243 -msgctxt "@action:inmenu menubar:profile" -msgid "&Create profile from current settings/overrides..." -msgstr "&Utwórz profil z bieżących ustawień..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +msgctxt "@label" +msgid "Profile author" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249 -msgctxt "@action:inmenu menubar:profile" -msgid "Manage Profiles..." -msgstr "Zarządzaj profilami..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +msgctxt "@label" +msgid "Printer name" +msgstr "Nazwa drukarki" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257 -msgctxt "@action:inmenu menubar:help" -msgid "Show Online &Documentation" -msgstr "Pokaż dokumentację internetową" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +msgctxt "@text" +msgid "Please name your printer" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265 -msgctxt "@action:inmenu menubar:help" -msgid "Report a &Bug" -msgstr "Zgłoś błąd" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 +msgctxt "@label" +msgid "Add a printer" +msgstr "Dodaj drukarkę" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273 -msgctxt "@action:inmenu menubar:help" -msgid "What's New" -msgstr "Co nowego" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:38 +msgctxt "@label" +msgid "Add a networked printer" +msgstr "Dodaj drukarkę sieciową" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287 -msgctxt "@action:inmenu menubar:help" -msgid "About..." -msgstr "O..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:87 +msgctxt "@label" +msgid "Add a non-networked printer" +msgstr "Dodaj drukarkę niesieciową" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294 -msgctxt "@action:inmenu menubar:edit" -msgid "Delete Selected" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 +msgctxt "@label" +msgid "There is no printer found over your network." +msgstr "Nie znaleziono drukarki w Twojej sieci." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 +msgctxt "@label" +msgid "Refresh" +msgstr "Odśwież" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 +msgctxt "@label" +msgid "Add printer by IP" +msgstr "Dodaj drukarkę przez IP" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184 +msgctxt "@label" +msgid "Add cloud printer" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304 -msgctxt "@action:inmenu menubar:edit" -msgid "Center Selected" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:220 +msgctxt "@label" +msgid "Troubleshooting" +msgstr "Rozwiązywanie problemów" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 +msgctxt "@label" +msgid "Add printer by IP address" +msgstr "Dodaj drukarkę przez IP" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:128 +msgctxt "@text" +msgid "Enter your printer's IP address." msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313 -msgctxt "@action:inmenu menubar:edit" -msgid "Multiply Selected" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:150 +msgctxt "@button" +msgid "Add" +msgstr "Dodaj" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:195 +msgctxt "@label" +msgid "Could not connect to device." +msgstr "Nie można połączyć się z urządzeniem." + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:196 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:201 +msgctxt "@label" +msgid "Can't connect to your Ultimaker printer?" msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322 -msgctxt "@action:inmenu" -msgid "Delete Model" -msgstr "Usuń model" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:200 +msgctxt "@label" +msgid "The printer at this address has not responded yet." +msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330 -msgctxt "@action:inmenu" -msgid "Ce&nter Model on Platform" -msgstr "Wyśrodkuj model na platformie" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:231 +msgctxt "@label" +msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." +msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336 -msgctxt "@action:inmenu menubar:edit" -msgid "&Group Models" -msgstr "&Grupuj modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:312 +msgctxt "@button" +msgid "Connect" +msgstr "Połącz" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356 -msgctxt "@action:inmenu menubar:edit" -msgid "Ungroup Models" -msgstr "Rozgrupuj modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 +msgctxt "@label" +msgid "Release Notes" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366 -msgctxt "@action:inmenu menubar:edit" -msgid "&Merge Models" -msgstr "Połącz modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:123 +msgctxt "@text" +msgid "Add material settings and plugins from the Marketplace" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376 -msgctxt "@action:inmenu" -msgid "&Multiply Model..." -msgstr "&Powiel model..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:149 +msgctxt "@text" +msgid "Backup and sync your material settings and plugins" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383 -msgctxt "@action:inmenu menubar:edit" -msgid "Select All Models" -msgstr "Wybierz wszystkie modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:175 +msgctxt "@text" +msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393 -msgctxt "@action:inmenu menubar:edit" -msgid "Clear Build Plate" -msgstr "Wyczyść stół" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:189 +msgctxt "@button" +msgid "Skip" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403 -msgctxt "@action:inmenu menubar:file" -msgid "Reload All Models" -msgstr "Przeładuj wszystkie modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:201 +msgctxt "@text" +msgid "Create a free Ultimaker Account" +msgstr "" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412 -msgctxt "@action:inmenu menubar:edit" -msgid "Arrange All Models" -msgstr "Ułóż wszystkie modele" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 +msgctxt "@label" +msgid "Help us to improve Ultimaker Cura" +msgstr "Pomóż nam ulepszyć Ultimaker Cura" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420 -msgctxt "@action:inmenu menubar:edit" -msgid "Arrange Selection" -msgstr "Wybór ułożenia" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:56 +msgctxt "@text" +msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" +msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427 -msgctxt "@action:inmenu menubar:edit" -msgid "Reset All Model Positions" -msgstr "Zresetuj wszystkie pozycje modelu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:68 +msgctxt "@text" +msgid "Machine types" +msgstr "Typy maszyn" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434 -msgctxt "@action:inmenu menubar:edit" -msgid "Reset All Model Transformations" -msgstr "Zresetuj wszystkie przekształcenia modelu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:74 +msgctxt "@text" +msgid "Material usage" +msgstr "Zużycie materiału" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443 -msgctxt "@action:inmenu menubar:file" -msgid "&Open File(s)..." -msgstr "&Otwórz plik(i)..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:80 +msgctxt "@text" +msgid "Number of slices" +msgstr "Ilość warstw" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453 -msgctxt "@action:inmenu menubar:file" -msgid "&New Project..." -msgstr "&Nowy projekt..." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:86 +msgctxt "@text" +msgid "Print settings" +msgstr "Ustawienia druku" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460 -msgctxt "@action:inmenu menubar:help" -msgid "Show Configuration Folder" -msgstr "Pokaż folder konfiguracji" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:99 +msgctxt "@text" +msgid "Data collected by Ultimaker Cura will not contain any personal information." +msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych." -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25 -msgctxt "@info:tooltip" -msgid "3D View" -msgstr "Widok 3D" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:100 +msgctxt "@text" +msgid "More information" +msgstr "Więcej informacji" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38 -msgctxt "@info:tooltip" -msgid "Front View" -msgstr "Widok z przodu" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 +msgctxt "@label" +msgid "Empty" +msgstr "Pusty" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51 -msgctxt "@info:tooltip" -msgid "Top View" -msgstr "Widok z góry" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 +msgctxt "@label" +msgid "User Agreement" +msgstr "Umowa z użytkownikiem" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64 -msgctxt "@info:tooltip" -msgid "Left View" -msgstr "Widok z lewej strony" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67 +msgctxt "@button" +msgid "Decline and close" +msgstr "Odrzuć i zamknij" -#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77 -msgctxt "@info:tooltip" -msgid "Right View" -msgstr "Widok z prawej strony" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 +msgctxt "@label" +msgid "Welcome to Ultimaker Cura" +msgstr "Witaj w Ultimaker Cura" -#: PrepareStage/plugin.json -msgctxt "description" -msgid "Provides a prepare stage in Cura." -msgstr "Zapewnia etap przygotowania w Cura." +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:67 +msgctxt "@text" +msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." +msgstr "" -#: PrepareStage/plugin.json -msgctxt "name" -msgid "Prepare Stage" -msgstr "Etap Przygotowania" +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:82 +msgctxt "@button" +msgid "Get started" +msgstr "Rozpocznij" -#: CuraProfileWriter/plugin.json +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28 +msgctxt "@label" +msgid "What's New" +msgstr "" + +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Widgets/ComboBox.qml:18 +msgctxt "@label" +msgid "No items to select from" +msgstr "" + +#: ModelChecker/plugin.json msgctxt "description" -msgid "Provides support for exporting Cura profiles." -msgstr "Zapewnia wsparcie dla eksportowania profili Cura." +msgid "Checks models and print configuration for possible printing issues and give suggestions." +msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady." -#: CuraProfileWriter/plugin.json +#: ModelChecker/plugin.json msgctxt "name" -msgid "Cura Profile Writer" -msgstr "Cura Profile Writer" +msgid "Model Checker" +msgstr "Sprawdzacz Modelu" -#: TrimeshReader/plugin.json +#: 3MFReader/plugin.json msgctxt "description" -msgid "Provides support for reading model files." -msgstr "Zapewnia wsparcie dla czytania plików modeli." +msgid "Provides support for reading 3MF files." +msgstr "Zapewnia wsparcie dla czytania plików 3MF." -#: TrimeshReader/plugin.json +#: 3MFReader/plugin.json msgctxt "name" -msgid "Trimesh Reader" -msgstr "Czytnik siatki trójkątów" +msgid "3MF Reader" +msgstr "Czytnik 3MF" -#: FirmwareUpdateChecker/plugin.json +#: 3MFWriter/plugin.json msgctxt "description" -msgid "Checks for firmware updates." -msgstr "Sprawdź aktualizacje oprogramowania." +msgid "Provides support for writing 3MF files." +msgstr "Zapewnia wsparcie dla tworzenia plików 3MF." -#: FirmwareUpdateChecker/plugin.json +#: 3MFWriter/plugin.json msgctxt "name" -msgid "Firmware Update Checker" -msgstr "Sprawdzacz Aktualizacji Oprogramowania" +msgid "3MF Writer" +msgstr "3MF Writer" -#: SentryLogger/plugin.json +#: AMFReader/plugin.json msgctxt "description" -msgid "Logs certain events so that they can be used by the crash reporter" -msgstr "" +msgid "Provides support for reading AMF files." +msgstr "Zapewnia wsparcie dla czytania plików AMF." -#: SentryLogger/plugin.json +#: AMFReader/plugin.json msgctxt "name" -msgid "Sentry Logger" -msgstr "" +msgid "AMF Reader" +msgstr "Czytnik AMF" -#: MonitorStage/plugin.json +#: CuraDrive/plugin.json msgctxt "description" -msgid "Provides a monitor stage in Cura." -msgstr "Zapewnia etap monitorowania w Cura." +msgid "Backup and restore your configuration." +msgstr "Utwórz kopię zapasową i przywróć konfigurację." -#: MonitorStage/plugin.json +#: CuraDrive/plugin.json msgctxt "name" -msgid "Monitor Stage" -msgstr "Etap Monitorowania" +msgid "Cura Backups" +msgstr "Kopie zapasowe Cura" -#: RemovableDriveOutputDevice/plugin.json +#: CuraEngineBackend/plugin.json msgctxt "description" -msgid "Provides removable drive hotplugging and writing support." -msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych." +msgid "Provides the link to the CuraEngine slicing backend." +msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine." -#: RemovableDriveOutputDevice/plugin.json +#: CuraEngineBackend/plugin.json msgctxt "name" -msgid "Removable Drive Output Device Plugin" -msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego" +msgid "CuraEngine Backend" +msgstr "Zaplecze CuraEngine" -#: AMFReader/plugin.json +#: CuraProfileReader/plugin.json msgctxt "description" -msgid "Provides support for reading AMF files." -msgstr "Zapewnia wsparcie dla czytania plików AMF." +msgid "Provides support for importing Cura profiles." +msgstr "Zapewnia wsparcie dla importowania profili Cura." -#: AMFReader/plugin.json +#: CuraProfileReader/plugin.json msgctxt "name" -msgid "AMF Reader" -msgstr "Czytnik AMF" +msgid "Cura Profile Reader" +msgstr "Czytnik Profili Cura" -#: UFPReader/plugin.json +#: CuraProfileWriter/plugin.json msgctxt "description" -msgid "Provides support for reading Ultimaker Format Packages." -msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker." +msgid "Provides support for exporting Cura profiles." +msgstr "Zapewnia wsparcie dla eksportowania profili Cura." -#: UFPReader/plugin.json +#: CuraProfileWriter/plugin.json msgctxt "name" -msgid "UFP Reader" -msgstr "Czytnik UFP" +msgid "Cura Profile Writer" +msgstr "Cura Profile Writer" #: DigitalLibrary/plugin.json msgctxt "description" @@ -6001,15 +6171,15 @@ msgctxt "name" msgid "Ultimaker Digital Library" msgstr "" -#: PerObjectSettingsTool/plugin.json +#: FirmwareUpdateChecker/plugin.json msgctxt "description" -msgid "Provides the Per Model Settings." -msgstr "Zapewnia Ustawienia dla Każdego Modelu." +msgid "Checks for firmware updates." +msgstr "Sprawdź aktualizacje oprogramowania." -#: PerObjectSettingsTool/plugin.json +#: FirmwareUpdateChecker/plugin.json msgctxt "name" -msgid "Per Model Settings Tool" -msgstr "Narzędzie Ustawień dla Każdego Modelu" +msgid "Firmware Update Checker" +msgstr "Sprawdzacz Aktualizacji Oprogramowania" #: FirmwareUpdater/plugin.json msgctxt "description" @@ -6021,35 +6191,45 @@ msgctxt "name" msgid "Firmware Updater" msgstr "Aktualizacja oprogramowania sprzętowego" -#: UM3NetworkPrinting/plugin.json +#: GCodeGzReader/plugin.json msgctxt "description" -msgid "Manages network connections to Ultimaker networked printers." -msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker." +msgid "Reads g-code from a compressed archive." +msgstr "Odczytuje g-code ze skompresowanych archiwum." -#: UM3NetworkPrinting/plugin.json +#: GCodeGzReader/plugin.json msgctxt "name" -msgid "Ultimaker Network Connection" -msgstr "Połączenie sieciowe Ultimaker" +msgid "Compressed G-code Reader" +msgstr "Czytnik Skompresowanego G-code" -#: ModelChecker/plugin.json +#: GCodeGzWriter/plugin.json msgctxt "description" -msgid "Checks models and print configuration for possible printing issues and give suggestions." -msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady." +msgid "Writes g-code to a compressed archive." +msgstr "Zapisuje g-code do skompresowanego archiwum." -#: ModelChecker/plugin.json +#: GCodeGzWriter/plugin.json msgctxt "name" -msgid "Model Checker" -msgstr "Sprawdzacz Modelu" +msgid "Compressed G-code Writer" +msgstr "Zapisywacz Skompresowanego G-code" -#: SimulationView/plugin.json +#: GCodeProfileReader/plugin.json msgctxt "description" -msgid "Provides the preview of sliced layerdata." -msgstr "" +msgid "Provides support for importing profiles from g-code files." +msgstr "Zapewnia wsparcie dla importowania profili z plików g-code." -#: SimulationView/plugin.json +#: GCodeProfileReader/plugin.json msgctxt "name" -msgid "Simulation View" -msgstr "Widok Symulacji" +msgid "G-code Profile Reader" +msgstr "Czytnik Profili G-code" + +#: GCodeReader/plugin.json +msgctxt "description" +msgid "Allows loading and displaying G-code files." +msgstr "Pozwala na ładowanie i wyświetlanie plików G-code." + +#: GCodeReader/plugin.json +msgctxt "name" +msgid "G-code Reader" +msgstr "Czytnik G-code" #: GCodeWriter/plugin.json msgctxt "description" @@ -6061,265 +6241,275 @@ msgctxt "name" msgid "G-code Writer" msgstr "Zapisywacz G-code" -#: 3MFWriter/plugin.json +#: ImageReader/plugin.json msgctxt "description" -msgid "Provides support for writing 3MF files." -msgstr "Zapewnia wsparcie dla tworzenia plików 3MF." +msgid "Enables ability to generate printable geometry from 2D image files." +msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D." -#: 3MFWriter/plugin.json +#: ImageReader/plugin.json msgctxt "name" -msgid "3MF Writer" -msgstr "3MF Writer" +msgid "Image Reader" +msgstr "Czytnik Obrazu" -#: GCodeGzReader/plugin.json +#: LegacyProfileReader/plugin.json msgctxt "description" -msgid "Reads g-code from a compressed archive." -msgstr "Odczytuje g-code ze skompresowanych archiwum." +msgid "Provides support for importing profiles from legacy Cura versions." +msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura." -#: GCodeGzReader/plugin.json +#: LegacyProfileReader/plugin.json msgctxt "name" -msgid "Compressed G-code Reader" -msgstr "Czytnik Skompresowanego G-code" +msgid "Legacy Cura Profile Reader" +msgstr "Czytnik Profili Starszej Cura" -#: XmlMaterialProfile/plugin.json +#: MachineSettingsAction/plugin.json msgctxt "description" -msgid "Provides capabilities to read and write XML-based material profiles." -msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML." +msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." +msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)." -#: XmlMaterialProfile/plugin.json +#: MachineSettingsAction/plugin.json msgctxt "name" -msgid "Material Profiles" -msgstr "Profile Materiału" +msgid "Machine Settings Action" +msgstr "" -#: CuraEngineBackend/plugin.json +#: Marketplace/plugin.json msgctxt "description" -msgid "Provides the link to the CuraEngine slicing backend." -msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine." +msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website." +msgstr "" -#: CuraEngineBackend/plugin.json +#: Marketplace/plugin.json msgctxt "name" -msgid "CuraEngine Backend" -msgstr "Zaplecze CuraEngine" +msgid "Marketplace" +msgstr "" -#: X3DReader/plugin.json +#: MonitorStage/plugin.json msgctxt "description" -msgid "Provides support for reading X3D files." -msgstr "Zapewnia możliwość czytania plików X3D." +msgid "Provides a monitor stage in Cura." +msgstr "Zapewnia etap monitorowania w Cura." -#: X3DReader/plugin.json +#: MonitorStage/plugin.json msgctxt "name" -msgid "X3D Reader" -msgstr "Czytnik X3D" +msgid "Monitor Stage" +msgstr "Etap Monitorowania" -#: ImageReader/plugin.json +#: PerObjectSettingsTool/plugin.json msgctxt "description" -msgid "Enables ability to generate printable geometry from 2D image files." -msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D." +msgid "Provides the Per Model Settings." +msgstr "Zapewnia Ustawienia dla Każdego Modelu." -#: ImageReader/plugin.json +#: PerObjectSettingsTool/plugin.json msgctxt "name" -msgid "Image Reader" -msgstr "Czytnik Obrazu" +msgid "Per Model Settings Tool" +msgstr "Narzędzie Ustawień dla Każdego Modelu" -#: 3MFReader/plugin.json +#: PostProcessingPlugin/plugin.json msgctxt "description" -msgid "Provides support for reading 3MF files." -msgstr "Zapewnia wsparcie dla czytania plików 3MF." +msgid "Extension that allows for user created scripts for post processing" +msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu" -#: 3MFReader/plugin.json +#: PostProcessingPlugin/plugin.json msgctxt "name" -msgid "3MF Reader" -msgstr "Czytnik 3MF" +msgid "Post Processing" +msgstr "Post Processing" -#: UFPWriter/plugin.json +#: PrepareStage/plugin.json msgctxt "description" -msgid "Provides support for writing Ultimaker Format Packages." -msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker." +msgid "Provides a prepare stage in Cura." +msgstr "Zapewnia etap przygotowania w Cura." -#: UFPWriter/plugin.json +#: PrepareStage/plugin.json msgctxt "name" -msgid "UFP Writer" -msgstr "Zapisywacz UFP" +msgid "Prepare Stage" +msgstr "Etap Przygotowania" -#: LegacyProfileReader/plugin.json +#: PreviewStage/plugin.json msgctxt "description" -msgid "Provides support for importing profiles from legacy Cura versions." -msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura." +msgid "Provides a preview stage in Cura." +msgstr "Dostarcza podgląd w Cura." -#: LegacyProfileReader/plugin.json +#: PreviewStage/plugin.json msgctxt "name" -msgid "Legacy Cura Profile Reader" -msgstr "Czytnik Profili Starszej Cura" +msgid "Preview Stage" +msgstr "Podgląd" -#: VersionUpgrade/VersionUpgrade43to44/plugin.json +#: RemovableDriveOutputDevice/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." -msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4." +msgid "Provides removable drive hotplugging and writing support." +msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych." -#: VersionUpgrade/VersionUpgrade43to44/plugin.json +#: RemovableDriveOutputDevice/plugin.json msgctxt "name" -msgid "Version Upgrade 4.3 to 4.4" -msgstr "Uaktualnij wersję 4.3 do 4.4" +msgid "Removable Drive Output Device Plugin" +msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego" -#: VersionUpgrade/VersionUpgrade21to22/plugin.json +#: SentryLogger/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." -msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2." +msgid "Logs certain events so that they can be used by the crash reporter" +msgstr "" -#: VersionUpgrade/VersionUpgrade21to22/plugin.json +#: SentryLogger/plugin.json msgctxt "name" -msgid "Version Upgrade 2.1 to 2.2" -msgstr "Ulepszenie Wersji z 2.1 do 2.2" +msgid "Sentry Logger" +msgstr "" -#: VersionUpgrade/VersionUpgrade41to42/plugin.json +#: SimulationView/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." -msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2." +msgid "Provides the preview of sliced layerdata." +msgstr "" -#: VersionUpgrade/VersionUpgrade41to42/plugin.json +#: SimulationView/plugin.json msgctxt "name" -msgid "Version Upgrade 4.1 to 4.2" -msgstr "Uaktualnij wersję 4.1 do 4.2" +msgid "Simulation View" +msgstr "Widok Symulacji" -#: VersionUpgrade/VersionUpgrade413to50/plugin.json +#: SliceInfoPlugin/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." -msgstr "" +msgid "Submits anonymous slice info. Can be disabled through preferences." +msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach." -#: VersionUpgrade/VersionUpgrade413to50/plugin.json +#: SliceInfoPlugin/plugin.json msgctxt "name" -msgid "Version Upgrade 4.13 to 5.0" -msgstr "" +msgid "Slice info" +msgstr "Informacje o cięciu" -#: VersionUpgrade/VersionUpgrade45to46/plugin.json +#: SolidView/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." -msgstr "" +msgid "Provides a normal solid mesh view." +msgstr "Zapewnia normalny widok siatki." -#: VersionUpgrade/VersionUpgrade45to46/plugin.json +#: SolidView/plugin.json msgctxt "name" -msgid "Version Upgrade 4.5 to 4.6" -msgstr "" +msgid "Solid View" +msgstr "Widok Bryły" -#: VersionUpgrade/VersionUpgrade33to34/plugin.json +#: SupportEraser/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." -msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4." +msgid "Creates an eraser mesh to block the printing of support in certain places" +msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach" -#: VersionUpgrade/VersionUpgrade33to34/plugin.json +#: SupportEraser/plugin.json msgctxt "name" -msgid "Version Upgrade 3.3 to 3.4" -msgstr "Ulepszenie Wersji z 3.3 do 3.4" +msgid "Support Eraser" +msgstr "Usuwacz Podpór" -#: VersionUpgrade/VersionUpgrade48to49/plugin.json +#: TrimeshReader/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." -msgstr "" +msgid "Provides support for reading model files." +msgstr "Zapewnia wsparcie dla czytania plików modeli." -#: VersionUpgrade/VersionUpgrade48to49/plugin.json +#: TrimeshReader/plugin.json msgctxt "name" -msgid "Version Upgrade 4.8 to 4.9" -msgstr "" +msgid "Trimesh Reader" +msgstr "Czytnik siatki trójkątów" -#: VersionUpgrade/VersionUpgrade27to30/plugin.json +#: UFPReader/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0." +msgid "Provides support for reading Ultimaker Format Packages." +msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker." -#: VersionUpgrade/VersionUpgrade27to30/plugin.json +#: UFPReader/plugin.json msgctxt "name" -msgid "Version Upgrade 2.7 to 3.0" -msgstr "Ulepszenie Wersji 2.7 do 3.0" +msgid "UFP Reader" +msgstr "Czytnik UFP" -#: VersionUpgrade/VersionUpgrade44to45/plugin.json +#: UFPWriter/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." -msgstr "" +msgid "Provides support for writing Ultimaker Format Packages." +msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker." -#: VersionUpgrade/VersionUpgrade44to45/plugin.json +#: UFPWriter/plugin.json msgctxt "name" -msgid "Version Upgrade 4.4 to 4.5" -msgstr "" +msgid "UFP Writer" +msgstr "Zapisywacz UFP" -#: VersionUpgrade/VersionUpgrade30to31/plugin.json +#: UltimakerMachineActions/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." -msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1." +msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." +msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)." -#: VersionUpgrade/VersionUpgrade30to31/plugin.json +#: UltimakerMachineActions/plugin.json msgctxt "name" -msgid "Version Upgrade 3.0 to 3.1" -msgstr "Ulepszenie Wersji 3.0 do 3.1" +msgid "Ultimaker machine actions" +msgstr "Czynności maszyny Ultimaker" -#: VersionUpgrade/VersionUpgrade460to462/plugin.json +#: UM3NetworkPrinting/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." -msgstr "" +msgid "Manages network connections to Ultimaker networked printers." +msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker." -#: VersionUpgrade/VersionUpgrade460to462/plugin.json +#: UM3NetworkPrinting/plugin.json msgctxt "name" -msgid "Version Upgrade 4.6.0 to 4.6.2" -msgstr "" +msgid "Ultimaker Network Connection" +msgstr "Połączenie sieciowe Ultimaker" -#: VersionUpgrade/VersionUpgrade26to27/plugin.json +#: USBPrinting/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." -msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7." +msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." +msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie." -#: VersionUpgrade/VersionUpgrade26to27/plugin.json +#: USBPrinting/plugin.json msgctxt "name" -msgid "Version Upgrade 2.6 to 2.7" -msgstr "Ulepszenie Wersji z 2.6 do 2.7" +msgid "USB printing" +msgstr "Drukowanie USB" -#: VersionUpgrade/VersionUpgrade42to43/plugin.json +#: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." -msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3." +msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." +msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2." -#: VersionUpgrade/VersionUpgrade42to43/plugin.json +#: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" -msgid "Version Upgrade 4.2 to 4.3" -msgstr "Uaktualnij wersję 4.2 do 4.3" +msgid "Version Upgrade 2.1 to 2.2" +msgstr "Ulepszenie Wersji z 2.1 do 2.2" -#: VersionUpgrade/VersionUpgrade40to41/plugin.json +#: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." -msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1." +msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." +msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4." -#: VersionUpgrade/VersionUpgrade40to41/plugin.json +#: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" -msgid "Version Upgrade 4.0 to 4.1" -msgstr "Uaktualnij wersję 4.0 do 4.1" +msgid "Version Upgrade 2.2 to 2.4" +msgstr "Ulepszenie Wersji z 2.2 do 2.4" -#: VersionUpgrade/VersionUpgrade462to47/plugin.json +#: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." -msgstr "" +msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." +msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6." -#: VersionUpgrade/VersionUpgrade462to47/plugin.json +#: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" -msgid "Version Upgrade 4.6.2 to 4.7" -msgstr "" +msgid "Version Upgrade 2.5 to 2.6" +msgstr "Ulepszenie Wersji z 2.5 do 2.6" -#: VersionUpgrade/VersionUpgrade49to410/plugin.json +#: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." -msgstr "" +msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." +msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7." -#: VersionUpgrade/VersionUpgrade49to410/plugin.json +#: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" -msgid "Version Upgrade 4.9 to 4.10" -msgstr "" +msgid "Version Upgrade 2.6 to 2.7" +msgstr "Ulepszenie Wersji z 2.6 do 2.7" -#: VersionUpgrade/VersionUpgrade22to24/plugin.json +#: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." -msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4." +msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." +msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0." -#: VersionUpgrade/VersionUpgrade22to24/plugin.json +#: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" -msgid "Version Upgrade 2.2 to 2.4" -msgstr "Ulepszenie Wersji z 2.2 do 2.4" +msgid "Version Upgrade 2.7 to 3.0" +msgstr "Ulepszenie Wersji 2.7 do 3.0" + +#: VersionUpgrade/VersionUpgrade30to31/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." +msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1." + +#: VersionUpgrade/VersionUpgrade30to31/plugin.json +msgctxt "name" +msgid "Version Upgrade 3.0 to 3.1" +msgstr "Ulepszenie Wersji 3.0 do 3.1" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" @@ -6331,25 +6521,15 @@ msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "Ulepszenie Wersji z 3.2 do 3.3" -#: VersionUpgrade/VersionUpgrade25to26/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." -msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6." - -#: VersionUpgrade/VersionUpgrade25to26/plugin.json -msgctxt "name" -msgid "Version Upgrade 2.5 to 2.6" -msgstr "Ulepszenie Wersji z 2.5 do 2.6" - -#: VersionUpgrade/VersionUpgrade35to40/plugin.json +#: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." -msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0." +msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." +msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4." -#: VersionUpgrade/VersionUpgrade35to40/plugin.json +#: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" -msgid "Version Upgrade 3.5 to 4.0" -msgstr "Uaktualnij wersję 3.5 do 4.0" +msgid "Version Upgrade 3.3 to 3.4" +msgstr "Ulepszenie Wersji z 3.3 do 3.4" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" @@ -6361,15 +6541,25 @@ msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "Ulepszenie Wersji z 3.4 do 3.5" -#: VersionUpgrade/VersionUpgrade47to48/plugin.json +#: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." -msgstr "" +msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." +msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0." -#: VersionUpgrade/VersionUpgrade47to48/plugin.json +#: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" -msgid "Version Upgrade 4.7 to 4.8" -msgstr "" +msgid "Version Upgrade 3.5 to 4.0" +msgstr "Uaktualnij wersję 3.5 do 4.0" + +#: VersionUpgrade/VersionUpgrade40to41/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." +msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1." + +#: VersionUpgrade/VersionUpgrade40to41/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.0 to 4.1" +msgstr "Uaktualnij wersję 4.0 do 4.1" #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" @@ -6381,159 +6571,163 @@ msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "" -#: CuraDrive/plugin.json +#: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" -msgid "Backup and restore your configuration." -msgstr "Utwórz kopię zapasową i przywróć konfigurację." +msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." +msgstr "" -#: CuraDrive/plugin.json +#: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" -msgid "Cura Backups" -msgstr "Kopie zapasowe Cura" +msgid "Version Upgrade 4.13 to 5.0" +msgstr "" -#: CuraProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" -msgid "Provides support for importing Cura profiles." -msgstr "Zapewnia wsparcie dla importowania profili Cura." +msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." +msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2." -#: CuraProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" -msgid "Cura Profile Reader" -msgstr "Czytnik Profili Cura" +msgid "Version Upgrade 4.1 to 4.2" +msgstr "Uaktualnij wersję 4.1 do 4.2" -#: SliceInfoPlugin/plugin.json +#: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" -msgid "Submits anonymous slice info. Can be disabled through preferences." -msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach." +msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." +msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3." -#: SliceInfoPlugin/plugin.json +#: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" -msgid "Slice info" -msgstr "Informacje o cięciu" +msgid "Version Upgrade 4.2 to 4.3" +msgstr "Uaktualnij wersję 4.2 do 4.3" -#: GCodeProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" -msgid "Provides support for importing profiles from g-code files." -msgstr "Zapewnia wsparcie dla importowania profili z plików g-code." +msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." +msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4." -#: GCodeProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" -msgid "G-code Profile Reader" -msgstr "Czytnik Profili G-code" +msgid "Version Upgrade 4.3 to 4.4" +msgstr "Uaktualnij wersję 4.3 do 4.4" -#: GCodeGzWriter/plugin.json +#: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" -msgid "Writes g-code to a compressed archive." -msgstr "Zapisuje g-code do skompresowanego archiwum." +msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." +msgstr "" -#: GCodeGzWriter/plugin.json +#: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" -msgid "Compressed G-code Writer" -msgstr "Zapisywacz Skompresowanego G-code" +msgid "Version Upgrade 4.4 to 4.5" +msgstr "" -#: PostProcessingPlugin/plugin.json +#: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" -msgid "Extension that allows for user created scripts for post processing" -msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu" +msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." +msgstr "" -#: PostProcessingPlugin/plugin.json +#: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" -msgid "Post Processing" -msgstr "Post Processing" +msgid "Version Upgrade 4.5 to 4.6" +msgstr "" -#: SupportEraser/plugin.json +#: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" -msgid "Creates an eraser mesh to block the printing of support in certain places" -msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach" +msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." +msgstr "" -#: SupportEraser/plugin.json +#: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" -msgid "Support Eraser" -msgstr "Usuwacz Podpór" +msgid "Version Upgrade 4.6.0 to 4.6.2" +msgstr "" -#: PreviewStage/plugin.json +#: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" -msgid "Provides a preview stage in Cura." -msgstr "Dostarcza podgląd w Cura." +msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." +msgstr "" -#: PreviewStage/plugin.json +#: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" -msgid "Preview Stage" -msgstr "Podgląd" +msgid "Version Upgrade 4.6.2 to 4.7" +msgstr "" -#: XRayView/plugin.json +#: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" -msgid "Provides the X-Ray view." -msgstr "Zapewnia widok rentgena." +msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." +msgstr "" -#: XRayView/plugin.json +#: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" -msgid "X-Ray View" -msgstr "Widok Rentgena" +msgid "Version Upgrade 4.7 to 4.8" +msgstr "" -#: UltimakerMachineActions/plugin.json +#: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" -msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." -msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)." +msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." +msgstr "" -#: UltimakerMachineActions/plugin.json +#: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" -msgid "Ultimaker machine actions" -msgstr "Czynności maszyny Ultimaker" +msgid "Version Upgrade 4.8 to 4.9" +msgstr "" -#: Marketplace/plugin.json +#: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" -msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website." +msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "" -#: Marketplace/plugin.json +#: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" -msgid "Marketplace" +msgid "Version Upgrade 4.9 to 4.10" msgstr "" -#: SolidView/plugin.json +#: X3DReader/plugin.json msgctxt "description" -msgid "Provides a normal solid mesh view." -msgstr "Zapewnia normalny widok siatki." +msgid "Provides support for reading X3D files." +msgstr "Zapewnia możliwość czytania plików X3D." -#: SolidView/plugin.json +#: X3DReader/plugin.json msgctxt "name" -msgid "Solid View" -msgstr "Widok Bryły" +msgid "X3D Reader" +msgstr "Czytnik X3D" -#: GCodeReader/plugin.json +#: XmlMaterialProfile/plugin.json msgctxt "description" -msgid "Allows loading and displaying G-code files." -msgstr "Pozwala na ładowanie i wyświetlanie plików G-code." +msgid "Provides capabilities to read and write XML-based material profiles." +msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML." -#: GCodeReader/plugin.json +#: XmlMaterialProfile/plugin.json msgctxt "name" -msgid "G-code Reader" -msgstr "Czytnik G-code" +msgid "Material Profiles" +msgstr "Profile Materiału" -#: MachineSettingsAction/plugin.json +#: XRayView/plugin.json msgctxt "description" -msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." -msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)." +msgid "Provides the X-Ray view." +msgstr "Zapewnia widok rentgena." -#: MachineSettingsAction/plugin.json +#: XRayView/plugin.json msgctxt "name" -msgid "Machine Settings Action" -msgstr "" +msgid "X-Ray View" +msgstr "Widok Rentgena" -#: USBPrinting/plugin.json -msgctxt "description" -msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." -msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie." +#~ msgctxt "@label" +#~ msgid "Not yet initialized<br/>" +#~ msgstr "Jeszcze nie uruchomiono<br/>" -#: USBPrinting/plugin.json -msgctxt "name" -msgid "USB printing" -msgstr "Drukowanie USB" +#~ msgctxt "@label" +#~ msgid "SVG icons" +#~ msgstr "Ikony SVG" -#~ msgctxt "@title:window" -#~ msgid "Plugin License Agreement" -#~ msgstr "Akceptowanie Licencji Wtyczki" +#~ msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" +#~ msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" +#~ msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" +#~ msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale" +#~ msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale" + +#~ msgctxt "@tooltip" +#~ msgid "You have modified some profile settings. If you want to change these go to custom mode." +#~ msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego." #~ msgctxt "@title:window" #~ msgid "Convert Image..." |