diff options
Diffstat (limited to 'resources/i18n/pt_PT/cura.po')
| -rw-r--r-- | resources/i18n/pt_PT/cura.po | 7828 |
1 files changed, 3982 insertions, 3846 deletions
diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po index b156b94b0d..dccd578e97 100644 --- a/resources/i18n/pt_PT/cura.po +++ b/resources/i18n/pt_PT/cura.po @@ -1,12 +1,12 @@ # Cura -# Copyright (C) 2020 Ultimaker B.V. +# Copyright (C) 2021 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # msgid "" msgstr "" -"Project-Id-Version: Cura 4.8\n" +"Project-Id-Version: Cura 4.9\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" -"POT-Creation-Date: 2020-10-19 13:15+0200\n" +"POT-Creation-Date: 2021-04-02 16:10+0200\n" "PO-Revision-Date: 2020-08-21 13:40+0200\n" "Last-Translator: Lionbridge <info@lionbridge.com>\n" "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n" @@ -17,178 +17,193 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 2.0.7\n" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 -msgctxt "@label" -msgid "Unknown" -msgstr "Desconhecido" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523 +msgctxt "@info:progress" +msgid "Loading machines..." +msgstr "A carregar máquinas..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 -msgctxt "@label" -msgid "The printer(s) below cannot be connected because they are part of a group" -msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530 +msgctxt "@info:progress" +msgid "Setting up preferences..." +msgstr "A configurar as preferências..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 -msgctxt "@label" -msgid "Available networked printers" -msgstr "Impressoras em rede disponíveis" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668 +msgctxt "@info:progress" +msgid "Initializing Active Machine..." +msgstr "A Inicializar a Máquina Ativa..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211 -msgctxt "@menuitem" -msgid "Not overridden" -msgstr "Manter" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799 +msgctxt "@info:progress" +msgid "Initializing machine manager..." +msgstr "A inicializar o gestor das máquinas..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76 -#, python-brace-format -msgctxt "@label {0} is the name of a printer that's about to be deleted." -msgid "Are you sure you wish to remove {0}? This cannot be undone!" -msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813 +msgctxt "@info:progress" +msgid "Initializing build volume..." +msgstr "A inicializar o volume de construção..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 -msgctxt "@label" -msgid "Default" -msgstr "Default" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884 +msgctxt "@info:progress" +msgid "Setting up scene..." +msgstr "A configurar cenário..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 -msgctxt "@label" -msgid "Visual" -msgstr "Acabamento" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920 +msgctxt "@info:progress" +msgid "Loading interface..." +msgstr "A carregar interface..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 -msgctxt "@text" -msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." -msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais." +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925 +msgctxt "@info:progress" +msgid "Initializing engine..." +msgstr "A inicializar o motor..." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 -msgctxt "@label" -msgid "Engineering" -msgstr "Engineering" +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242 +#, python-format +msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." +msgid "%(width).1f x %(depth).1f x %(height).1f mm" +msgstr "%(width).1f x %(depth).1f x %(height).1f mm" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 -msgctxt "@text" -msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." -msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores." +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799 +#, python-brace-format +msgctxt "@info:status" +msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" +msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 -msgctxt "@label" -msgid "Draft" -msgstr "Rascunho" +# rever! +# contexto! +# Atenção? +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 +msgctxt "@info:title" +msgid "Warning" +msgstr "Aviso" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 -msgctxt "@text" -msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." -msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão." +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809 +#, python-brace-format +msgctxt "@info:status" +msgid "Can't open any other file if G-code is loading. Skipped importing {0}" +msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226 +#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 +msgctxt "@info:title" +msgid "Error" +msgstr "Erro" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76 +#, python-brace-format +msgctxt "@label {0} is the name of a printer that's about to be deleted." +msgid "Are you sure you wish to remove {0}? This cannot be undone!" +msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226 msgctxt "@label" msgid "Custom Material" msgstr "Material Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205 msgctxt "@label" msgid "Custom" msgstr "Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42 +msgctxt "@label" +msgid "Default" +msgstr "Default" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 +msgctxt "@label" +msgid "Unknown" +msgstr "Desconhecido" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383 msgctxt "@label" msgid "Custom profiles" msgstr "Perfis personalizados" # rever! # contexto -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Todos os Formatos Suportados ({0})" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Todos os Ficheiros (*)" -#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178 -msgctxt "@info:title" -msgid "Login failed" -msgstr "Falha no início de sessão" - -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 -msgctxt "@info:status" -msgid "Finding new location for objects" -msgstr "A procurar nova posição para os objetos" - -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 -msgctxt "@info:title" -msgid "Finding Location" -msgstr "A Procurar Posição" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45 +msgctxt "@label" +msgid "Visual" +msgstr "Acabamento" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 -msgctxt "@info:status" -msgid "Unable to find a location within the build volume for all objects" -msgstr "Não é possível posicionar todos os objetos dentro do volume de construção" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46 +msgctxt "@text" +msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." +msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais." -# rever! -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 -msgctxt "@info:title" -msgid "Can't Find Location" -msgstr "Não é Possível Posicionar" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49 +msgctxt "@label" +msgid "Engineering" +msgstr "Engineering" -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104 -msgctxt "@info:backup_failed" -msgid "Could not create archive from user data directory: {}" -msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50 +msgctxt "@text" +msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." +msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores." -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113 -msgctxt "@info:title" -msgid "Backup" -msgstr "Backup" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53 +msgctxt "@label" +msgid "Draft" +msgstr "Rascunho" -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123 -msgctxt "@info:backup_failed" -msgid "Tried to restore a Cura backup without having proper data or meta data." -msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos." +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23 +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54 +msgctxt "@text" +msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." +msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão." -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134 -msgctxt "@info:backup_failed" -msgid "Tried to restore a Cura backup that is higher than the current version." -msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual." +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 +msgctxt "@label" +msgid "The printer(s) below cannot be connected because they are part of a group" +msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo" -#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98 -msgctxt "@info:status" -msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." -msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos." +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 +msgctxt "@label" +msgid "Available networked printers" +msgstr "Impressoras em rede disponíveis" -#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100 -msgctxt "@info:title" -msgid "Build Volume" -msgstr "Volume de construção" +#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211 +msgctxt "@menuitem" +msgid "Not overridden" +msgstr "Manter" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "Não é possível iniciar o Cura" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n" @@ -205,32 +220,32 @@ msgstr "" # rever! # button size? -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "Enviar relatório de falhas para a Ultimaker" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Mostrar relatório de falhas detalhado" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Mostrar pasta de configuração" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Backup e Repor a Configuração" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Relatório de Falhas" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n" @@ -241,851 +256,481 @@ msgstr "" " <p>Por favor utilize o botão \"Enviar relatório\" para publicar um relatório de erros automaticamente nos nossos servidores</p>\n" " " -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Informações do sistema" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Desconhecido" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Versão do Cura" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "Idioma do Cura" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "Idioma do Sistema Operativo" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Plataforma" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Versão Qt" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "Versão PyQt" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized<br/>" msgstr "Ainda não inicializado<br/>" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "<li>OpenGL Version: {version}</li>" msgstr "<li>Versão do OpenGL: {version}</li>" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "<li>OpenGL Vendor: {vendor}</li>" msgstr "<li>Vendedor do OpenGL: {vendor}</li>" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "<li>OpenGL Renderer: {renderer}</li>" msgstr "<li>Processador do OpenGL: {renderer}</li>" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Determinação da origem do erro" # rever! # Registos? -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389 msgctxt "@title:groupbox" msgid "Logs" msgstr "Relatórios" -#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417 +#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417 msgctxt "@action:button" msgid "Send report" msgstr "Enviar relatório" -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521 -msgctxt "@info:progress" -msgid "Loading machines..." -msgstr "A carregar máquinas..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528 -msgctxt "@info:progress" -msgid "Setting up preferences..." -msgstr "A configurar as preferências..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657 -msgctxt "@info:progress" -msgid "Initializing Active Machine..." -msgstr "A Inicializar a Máquina Ativa..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788 -msgctxt "@info:progress" -msgid "Initializing machine manager..." -msgstr "A inicializar o gestor das máquinas..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802 -msgctxt "@info:progress" -msgid "Initializing build volume..." -msgstr "A inicializar o volume de construção..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870 -msgctxt "@info:progress" -msgid "Setting up scene..." -msgstr "A configurar cenário..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906 -msgctxt "@info:progress" -msgid "Loading interface..." -msgstr "A carregar interface..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911 -msgctxt "@info:progress" -msgid "Initializing engine..." -msgstr "A inicializar o motor..." - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221 -#, python-format -msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." -msgid "%(width).1f x %(depth).1f x %(height).1f mm" -msgstr "%(width).1f x %(depth).1f x %(height).1f mm" - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777 -#, python-brace-format -msgctxt "@info:status" -msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" -msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada" - -# rever! -# contexto! -# Atenção? -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 +#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179 msgctxt "@info:title" -msgid "Warning" -msgstr "Aviso" - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787 -#, python-brace-format -msgctxt "@info:status" -msgid "Can't open any other file if G-code is loading. Skipped importing {0}" -msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada" - -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 -msgctxt "@info:title" -msgid "Error" -msgstr "Erro" - -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26 -msgctxt "@info:status" -msgid "Multiplying and placing objects" -msgstr "Multiplicar e posicionar objetos" - -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28 -msgctxt "@info:title" -msgid "Placing Objects" -msgstr "A posicionar objetos" - -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77 -msgctxt "@info:title" -msgid "Placing Object" -msgstr "A Posicionar Objeto" +msgid "Login failed" +msgstr "Falha no início de sessão" -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92 msgctxt "@message" msgid "Could not read response." msgstr "Não foi possível ler a resposta." -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187 +msgctxt "@info" +msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." +msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão." + +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242 +msgctxt "@info" +msgid "Unable to reach the Ultimaker account server." +msgstr "Não é possível aceder ao servidor da conta Ultimaker." + +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74 msgctxt "@message" msgid "The provided state is not correct." msgstr "O estado apresentado não está correto." -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Forneça as permissões necessárias ao autorizar esta aplicação." -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92 +#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Ocorreu algo inesperado ao tentar iniciar sessão, tente novamente." -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187 -msgctxt "@info" -msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." -msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão." - -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 -msgctxt "@info" -msgid "Unable to reach the Ultimaker account server." -msgstr "Não é possível aceder ao servidor da conta Ultimaker." - -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132 msgctxt "@title:window" msgid "File Already Exists" msgstr "O Ficheiro Já Existe" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133 #, python-brace-format msgctxt "@label Don't translate the XML tag <filename>!" msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?" msgstr "O ficheiro <filename>{0}</filename> já existe. Tem a certeza de que deseja substituí-lo?" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "URL de ficheiro inválido:" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 +msgctxt "@label" +msgid "Nozzle" +msgstr "Nozzle" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856 +msgctxt "@info:message Followed by a list of settings." +msgid "Settings have been changed to match the current availability of extruders:" +msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858 +msgctxt "@info:title" +msgid "Settings updated" +msgstr "Definições atualizadas" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478 +msgctxt "@info:title" +msgid "Extruder(s) Disabled" +msgstr "Extrusor(es) desativado(s)" + +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>" msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151 #, python-brace-format msgctxt "@info:status Don't translate the XML tag <filename>!" msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure." msgstr "Falha ao exportar perfil para <filename>{0}</filename>: O plug-in de gravação comunicou uma falha." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156 #, python-brace-format msgctxt "@info:status Don't translate the XML tag <filename>!" msgid "Exported profile to <filename>{0}</filename>" msgstr "Perfil exportado para <filename>{0}</filename>" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157 msgctxt "@info:title" msgid "Export succeeded" msgstr "Exportação bem-sucedida" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename>!" msgid "Failed to import profile from <filename>{0}</filename>: {1}" msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename>!" msgid "Can't import profile from <filename>{0}</filename> before a printer is added." msgstr "Não é possível importar o perfil de <filename>{0}</filename> antes de ser adicionada uma impressora." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename>!" msgid "No custom profile to import in file <filename>{0}</filename>" msgstr "Nenhum perfil personalizado para importar no ficheiro <filename>{0}</filename>" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename>!" msgid "Failed to import profile from <filename>{0}</filename>:" msgstr "Falha ao importar perfil de <filename>{0}</filename>:" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename>!" msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it." msgstr "O perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338 #, python-brace-format msgctxt "@info:status Don't translate the XML tag <filename>!" msgid "Failed to import profile from <filename>{0}</filename>:" msgstr "Falha ao importar perfil de <filename>{0}</filename>:" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "Perfil {0} importado com êxito." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "O ficheiro {0} não contém qualquer perfil válido." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "O perfil {0} é de um formato de ficheiro desconhecido ou está corrompido." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426 msgctxt "@label" msgid "Custom profile" msgstr "Perfil personalizado" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "O perfil não inclui qualquer tipo de qualidade." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446 msgctxt "@info:status" -msgid "Global stack is missing." -msgstr "A pilha global está em falta." +msgid "There is no active printer yet." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "Não é possível adicionar o perfil." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "O tipo de qualidade '{0}' não é compatível com a definição de máquina atualmente ativa '{1}'." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." -msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal" -" que possa utilizar este tipo de qualidade." +msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal que possa utilizar este tipo de qualidade." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Não suportado" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55 +#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "Default" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 -msgctxt "@label" -msgid "Nozzle" -msgstr "Nozzle" - -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860 -msgctxt "@info:message Followed by a list of settings." -msgid "Settings have been changed to match the current availability of extruders:" -msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:" +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24 +msgctxt "@info:status" +msgid "Finding new location for objects" +msgstr "A procurar nova posição para os objetos" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" -msgid "Settings updated" -msgstr "Definições atualizadas" +msgid "Finding Location" +msgstr "A Procurar Posição" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41 +#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76 +msgctxt "@info:status" +msgid "Unable to find a location within the build volume for all objects" +msgstr "Não é possível posicionar todos os objetos dentro do volume de construção" + +# rever! +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 +#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" -msgid "Extruder(s) Disabled" -msgstr "Extrusor(es) desativado(s)" +msgid "Can't Find Location" +msgstr "Não é Possível Posicionar" + +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69 +#, python-brace-format +msgctxt "@label" +msgid "Group #{group_nr}" +msgstr "Grupo #{group_nr}" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268 msgctxt "@action:button" -msgid "Add" -msgstr "Adicionar" +msgid "Skip" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127 msgctxt "@action:button" -msgid "Finish" -msgstr "Concluir" +msgid "Close" +msgstr "Fechar" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259 msgctxt "@action:button" -msgid "Cancel" -msgstr "Cancelar" +msgid "Next" +msgstr "Seguinte" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69 -#, python-brace-format -msgctxt "@label" -msgid "Group #{group_nr}" -msgstr "Grupo #{group_nr}" +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26 +msgctxt "@action:button" +msgid "Finish" +msgstr "Concluir" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Parede Exterior" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Paredes Interiores" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84 msgctxt "@tooltip" msgid "Skin" msgstr "Revestimento" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Infill" msgstr "Enchimento" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Support Infill" msgstr "Enchimento dos Suportes" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Support Interface" msgstr "Interface dos Suportes" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Support" msgstr "Suportes" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Skirt" msgstr "Contorno" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Torre de preparação" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Travel" msgstr "Deslocação" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Retractions" msgstr "Retrações" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Other" msgstr "Outro" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48 msgctxt "@action:button" -msgid "Next" -msgstr "Seguinte" +msgid "Add" +msgstr "Adicionar" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 +#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292 msgctxt "@action:button" -msgid "Close" -msgstr "Fechar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31 -msgctxt "@info:title" -msgid "3D Model Assistant" -msgstr "Assistente de Modelos 3D" +msgid "Cancel" +msgstr "Cancelar" -# rever! -#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96 -#, python-brace-format +#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98 msgctxt "@info:status" -msgid "" -"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n" -"<p>{model_names}</p>\n" -"<p>Find out how to ensure the best possible print quality and reliability.</p>\n" -"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>" -msgstr "" -"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n" -"<p>{model_names}</p>\n" -"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n" -"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535 -#, python-brace-format -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead." -msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538 -msgctxt "@info:title" -msgid "Open Project File" -msgstr "Abrir ficheiro de projeto" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634 -#, python-brace-format -msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" -msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>." -msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635 -msgctxt "@info:title" -msgid "Can't Open Project File" -msgstr "Não é possível abrir o ficheiro de projeto" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686 -#, python-brace-format -msgctxt "@info:error Don't translate the XML tag <filename>!" -msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura." -msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203 -msgctxt "@title:tab" -msgid "Recommended" -msgstr "Recomendado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205 -msgctxt "@title:tab" -msgid "Custom" -msgstr "Personalizado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 -msgctxt "@item:inlistbox" -msgid "3MF File" -msgstr "Ficheiro 3MF" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 -msgctxt "@error:zip" -msgid "3MF Writer plug-in is corrupt." -msgstr "O plug-in Gravador 3MF está danificado." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 -msgctxt "@error:zip" -msgid "No permission to write the workspace here." -msgstr "Não tem permissão para escrever o espaço de trabalho aqui." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96 -msgctxt "@error:zip" -msgid "The operating system does not allow saving a project file to this location or with this file name." -msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185 -msgctxt "@error:zip" -msgid "Error writing 3mf file." -msgstr "Erro ao gravar ficheiro 3mf." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26 -msgctxt "@item:inlistbox" -msgid "3MF file" -msgstr "Ficheiro 3MF" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34 -msgctxt "@item:inlistbox" -msgid "Cura Project 3MF file" -msgstr "Ficheiro 3MF de Projeto Cura" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15 -msgctxt "@item:inlistbox" -msgid "AMF File" -msgstr "Ficheiro AMF" +msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." +msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 +#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100 msgctxt "@info:title" -msgid "Backups" -msgstr "Cópias de segurança" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27 -msgctxt "@info:backup_status" -msgid "There was an error while uploading your backup." -msgstr "Ocorreu um erro ao carregar a sua cópia de segurança." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47 -msgctxt "@info:backup_status" -msgid "Creating your backup..." -msgstr "A criar a cópia de segurança..." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54 -msgctxt "@info:backup_status" -msgid "There was an error while creating your backup." -msgstr "Ocorreu um erro ao criar a cópia de segurança." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58 -msgctxt "@info:backup_status" -msgid "Uploading your backup..." -msgstr "A carregar a sua cópia de segurança..." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68 -msgctxt "@info:backup_status" -msgid "Your backup has finished uploading." -msgstr "A cópia de segurança terminou o seu carregamento." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107 -msgctxt "@error:file_size" -msgid "The backup exceeds the maximum file size." -msgstr "A cópia de segurança excede o tamanho de ficheiro máximo." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23 -msgctxt "@info:backup_status" -msgid "There was an error trying to restore your backup." -msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64 -msgctxt "@item:inmenu" -msgid "Manage backups" -msgstr "Gerir cópias de segurança" +msgid "Build Volume" +msgstr "Volume de construção" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 -msgctxt "@info:status" -msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada." +#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113 +msgctxt "@info:backup_failed" +msgid "Could not create archive from user data directory: {}" +msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441 +#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113 msgctxt "@info:title" -msgid "Unable to slice" -msgstr "Não é possível Seccionar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386 -#, python-brace-format -msgctxt "@info:status" -msgid "Unable to slice with the current settings. The following settings have errors: {0}" -msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410 -#, python-brace-format -msgctxt "@info:status" -msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" -msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419 -msgctxt "@info:status" -msgid "Unable to slice because the prime tower or prime position(s) are invalid." -msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas." +msgid "Backup" +msgstr "Backup" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 -#, python-format -msgctxt "@info:status" -msgid "Unable to slice because there are objects associated with disabled Extruder %s." -msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado." +#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132 +msgctxt "@info:backup_failed" +msgid "Tried to restore a Cura backup without having proper data or meta data." +msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437 -msgctxt "@info:status" -msgid "" -"Please review settings and check if your models:\n" -"- Fit within the build volume\n" -"- Are assigned to an enabled extruder\n" -"- Are not all set as modifier meshes" -msgstr "" -"Reveja as definições e verifique se os seus modelos:\n" -"- Cabem dentro do volume de construção\n" -"- Estão atribuídos a uma extrusora ativada\n" -"- Não estão todos definidos como objetos modificadores" +#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143 +msgctxt "@info:backup_failed" +msgid "Tried to restore a Cura backup that is higher than the current version." +msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26 msgctxt "@info:status" -msgid "Processing Layers" -msgstr "A Processar Camadas" +msgid "Multiplying and placing objects" +msgstr "Multiplicar e posicionar objetos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28 msgctxt "@info:title" -msgid "Information" -msgstr "Informações" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 -msgctxt "@item:inlistbox" -msgid "Cura Profile" -msgstr "Perfil Cura" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 -msgctxt "@info" -msgid "Could not access update information." -msgstr "Não foi possível aceder às informações de atualização." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 -#, python-brace-format -msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" -msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}." -msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 -#, python-format -msgctxt "@info:title The %s gets replaced with the printer name." -msgid "New %s firmware available" -msgstr "Novo firmware para %s está disponível" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 -msgctxt "@action:button" -msgid "How to update" -msgstr "Como atualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 -msgctxt "@action" -msgid "Update Firmware" -msgstr "Atualizar firmware" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 -msgctxt "@item:inlistbox" -msgid "Compressed G-code File" -msgstr "Ficheiro G-code comprimido" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 -msgctxt "@error:not supported" -msgid "GCodeGzWriter does not support text mode." -msgstr "O GCodeGzWriter não suporta modo de texto." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 -msgctxt "@item:inlistbox" -msgid "G-code File" -msgstr "Ficheiro G-code" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347 -msgctxt "@info:status" -msgid "Parsing G-code" -msgstr "A analisar G-code" +msgid "Placing Objects" +msgstr "A posicionar objetos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 +#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77 msgctxt "@info:title" -msgid "G-code Details" -msgstr "Detalhes do G-code" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501 -msgctxt "@info:generic" -msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." -msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18 -msgctxt "@item:inlistbox" -msgid "G File" -msgstr "Ficheiro G" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74 -msgctxt "@error:not supported" -msgid "GCodeWriter does not support non-text mode." -msgstr "O GCodeWriter não suporta modo sem texto." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 -msgctxt "@warning:status" -msgid "Please prepare G-code before exporting." -msgstr "Prepare um G-code antes de exportar." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14 -msgctxt "@item:inlistbox" -msgid "JPG Image" -msgstr "Imagem JPG" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18 -msgctxt "@item:inlistbox" -msgid "JPEG Image" -msgstr "Imagem JPEG" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22 -msgctxt "@item:inlistbox" -msgid "PNG Image" -msgstr "Imagem PNG" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26 -msgctxt "@item:inlistbox" -msgid "BMP Image" -msgstr "Imagem BMP" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30 -msgctxt "@item:inlistbox" -msgid "GIF Image" -msgstr "Imagem GIF" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 -msgctxt "@item:inlistbox" -msgid "Cura 15.04 profiles" -msgstr "Perfis Cura 15.04" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 -msgctxt "@action" -msgid "Machine Settings" -msgstr "Definições da Máquina" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14 -msgctxt "@item:inmenu" -msgid "Monitor" -msgstr "Monitorizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 -msgctxt "@label" -msgid "Per Model Settings" -msgstr "Definições Por-Modelo" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15 -msgctxt "@info:tooltip" -msgid "Configure Per Model Settings" -msgstr "Configurar definições individuais Por-Modelo" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 -msgctxt "@item:inmenu" -msgid "Post Processing" -msgstr "Pós-Processamento" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 -msgctxt "@item:inmenu" -msgid "Modify G-Code" -msgstr "Modificar G-Code" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12 -msgctxt "@item:inmenu" -msgid "Prepare" -msgstr "Preparar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13 -msgctxt "@item:inmenu" -msgid "Preview" -msgstr "Pré-visualizar" +msgid "Placing Object" +msgstr "A Posicionar Objeto" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Guardar no Disco Externo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" @@ -1093,281 +738,303 @@ msgstr "Guardar no Disco Externo {0}" # rever! # contexto -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Não existem quaisquer formatos disponíveis para gravar o ficheiro!" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags <filename>!" msgid "Saving to Removable Drive <filename>{0}</filename>" msgstr "A Guardar no Disco Externo <filename>{0}</filename>" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 msgctxt "@info:title" msgid "Saving" msgstr "A Guardar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>" msgstr "Não foi possível guardar em <filename>{0}</filename>: <message>{1}</message>" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Não foi possível encontrar um nome do ficheiro ao tentar gravar em {device}." -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Não foi possível guardar no Disco Externo {0}: {1}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Guardado no Disco Externo {0} como {1}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 msgctxt "@info:title" msgid "File Saved" msgstr "Ficheiro Guardado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 msgctxt "@action:button" msgid "Eject" msgstr "Ejetar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "Ejetar Disco Externo {0}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "{0} foi ejetado. O Disco já pode ser removido de forma segura." -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Remover Hardware de forma segura" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "Não foi possível ejectar {0}. Outro programa pode estar a usar o disco." -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 +#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Disco Externo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121 -msgctxt "@info:status" -msgid "Cura does not accurately display layers when Wire Printing is enabled." -msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122 -msgctxt "@info:title" -msgid "Simulation View" -msgstr "Visualização por Camadas" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 -msgctxt "@info:status" -msgid "Nothing is shown because you need to slice first." -msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 -msgctxt "@info:title" -msgid "No layers to show" -msgstr "Sem camadas para visualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73 -msgctxt "@info:option_text" -msgid "Do not show this message again" -msgstr "Não mostrar esta mensagem novamente" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15 +#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" -msgid "Layer view" -msgstr "Vista Camadas" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70 -msgctxt "@info:status" -msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces." -msgstr "O seu modelo não é uma variedade. As áreas destacadas indicam superfícies extra ou em falta." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72 -msgctxt "@info:title" -msgid "Model errors" -msgstr "Erros de modelo" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12 -msgctxt "@item:inmenu" -msgid "Solid view" -msgstr "Vista Sólidos" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12 -msgctxt "@label" -msgid "Support Blocker" -msgstr "Remover Suportes" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13 -msgctxt "@info:tooltip" -msgid "Create a volume in which supports are not printed." -msgstr "Criar um volume dentro do qual não são impressos suportes." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142 -msgctxt "@info:generic" -msgid "Do you want to sync material and software packages with your account?" -msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?" +msgid "AMF File" +msgstr "Ficheiro AMF" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 -msgctxt "@info:title" -msgid "Changes detected from your Ultimaker account" -msgstr "Foram detetadas alterações da sua conta Ultimaker" +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16 +msgctxt "@item:inlistbox" +msgid "G-code File" +msgstr "Ficheiro G-code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146 -msgctxt "@action:button" -msgid "Sync" -msgstr "Sincronizar" +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 +msgctxt "@action" +msgid "Update Firmware" +msgstr "Atualizar firmware" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89 -msgctxt "@info:generic" -msgid "Syncing..." -msgstr "A sincronizar..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13 +msgctxt "@item:inlistbox" +msgid "X3D File" +msgstr "Ficheiro X3D" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9 msgctxt "@button" msgid "Decline" msgstr "Rejeitar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 msgctxt "@button" msgid "Agree" msgstr "Concordar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "Contrato de licença do plug-in" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38 msgctxt "@button" msgid "Decline and remove from account" msgstr "Rejeitar e remover da conta" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79 +msgctxt "@info:generic" +msgid "{} plugins failed to download" +msgstr "Falhou a transferência de {} plug-ins" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89 +msgctxt "@info:generic" +msgid "Syncing..." +msgstr "A sincronizar..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 +msgctxt "@info:title" +msgid "Changes detected from your Ultimaker account" +msgstr "Foram detetadas alterações da sua conta Ultimaker" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "É necessário reiniciar o {} para que as alterações tenham efeito." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142 msgctxt "@info:generic" -msgid "{} plugins failed to download" -msgstr "Falhou a transferência de {} plug-ins" +msgid "Do you want to sync material and software packages with your account?" +msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15 -msgctxt "@item:inlistbox 'Open' is part of the name of this file format." -msgid "Open Compressed Triangle Mesh" -msgstr "Open Compressed Triangle Mesh" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145 +msgctxt "@action:button" +msgid "Sync" +msgstr "Sincronizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19 -msgctxt "@item:inlistbox" -msgid "COLLADA Digital Asset Exchange" -msgstr "COLLADA Digital Asset Exchange" +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14 +msgctxt "@label" +msgid "Per Model Settings" +msgstr "Definições Por-Modelo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23 -msgctxt "@item:inlistbox" -msgid "glTF Binary" -msgstr "glTF Binary" +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15 +msgctxt "@info:tooltip" +msgid "Configure Per Model Settings" +msgstr "Configurar definições individuais Por-Modelo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27 -msgctxt "@item:inlistbox" -msgid "glTF Embedded JSON" -msgstr "glTF Embedded JSON" +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 +msgctxt "@item:inmenu" +msgid "Post Processing" +msgstr "Pós-Processamento" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36 -msgctxt "@item:inlistbox" -msgid "Stanford Triangle Format" -msgstr "Stanford Triangle Format" +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 +msgctxt "@item:inmenu" +msgid "Modify G-Code" +msgstr "Modificar G-Code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40 -msgctxt "@item:inlistbox" -msgid "Compressed COLLADA Digital Asset Exchange" -msgstr "Compressed COLLADA Digital Asset Exchange" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382 +msgctxt "@info:status" +msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." +msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 -msgctxt "@item:inlistbox" -msgid "Ultimaker Format Package" -msgstr "Arquivo Ultimaker Format" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467 +msgctxt "@info:title" +msgid "Unable to slice" +msgstr "Não é possível Seccionar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146 -msgctxt "@info:error" -msgid "Can't write to UFP file:" -msgstr "Não é possível escrever no ficheiro UFP:" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412 +#, python-brace-format +msgctxt "@info:status" +msgid "Unable to slice with the current settings. The following settings have errors: {0}" +msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 -msgctxt "@action" -msgid "Level build plate" -msgstr "Nivelar base de construção" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436 +#, python-brace-format +msgctxt "@info:status" +msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" +msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 -msgctxt "@action" -msgid "Select upgrades" -msgstr "Selecionar atualizações" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445 +msgctxt "@info:status" +msgid "Unable to slice because the prime tower or prime position(s) are invalid." +msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152 -msgctxt "@action:button" -msgid "Print via cloud" -msgstr "Imprimir através da cloud" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454 +#, python-format +msgctxt "@info:status" +msgid "Unable to slice because there are objects associated with disabled Extruder %s." +msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153 -msgctxt "@properties:tooltip" -msgid "Print via cloud" -msgstr "Imprimir através da cloud" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463 +msgctxt "@info:status" +msgid "" +"Please review settings and check if your models:\n" +"- Fit within the build volume\n" +"- Are assigned to an enabled extruder\n" +"- Are not all set as modifier meshes" +msgstr "" +"Reveja as definições e verifique se os seus modelos:\n" +"- Cabem dentro do volume de construção\n" +"- Estão atribuídos a uma extrusora ativada\n" +"- Não estão todos definidos como objetos modificadores" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" -msgid "Connected via cloud" -msgstr "Ligada através da cloud" +msgid "Processing Layers" +msgstr "A Processar Camadas" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264 -#, python-brace-format -msgctxt "@error:send" -msgid "Unknown error code when uploading print job: {0}" -msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +msgctxt "@info:title" +msgid "Information" +msgstr "Informações" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227 +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 +msgctxt "@item:inmenu" +msgid "USB printing" +msgstr "Impressão USB" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 +msgctxt "@action:button Preceded by 'Ready to'." +msgid "Print via USB" +msgstr "Imprimir por USB" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 +msgctxt "@info:tooltip" +msgid "Print via USB" +msgstr "Imprimir por USB" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 +msgctxt "@info:status" +msgid "Connected via USB" +msgstr "Ligado via USB" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 +msgctxt "@label" +msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" +msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 +msgctxt "@message" +msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." +msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 +msgctxt "@message" +msgid "Print in Progress" +msgstr "Impressão em curso" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14 +msgctxt "@item:inlistbox" +msgid "Cura Profile" +msgstr "Perfil Cura" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 +msgctxt "@action" +msgid "Connect via Network" +msgstr "Ligar Através da Rede" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "Nova impressora detetada a partir da sua conta Ultimaker" msgstr[1] "Novas impressoras detetadas a partir da sua conta Ultimaker" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "Adicionar impressora {name} ({model}) a partir da sua conta" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" @@ -1375,71 +1042,71 @@ msgid_plural "... and {0} others" msgstr[0] "... e {0} outra" msgstr[1] "... e {0} outras" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "Impressoras adicionadas a partir da Digital Factory:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "Não existe uma conectividade de cloud disponível para a impressora" msgstr[1] "Não existe uma conectividade de cloud disponível para algumas impressoras" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "Esta impressora não está associada à Digital Factory:" msgstr[1] "Estas impressoras não estão associadas à Digital Factory:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "Para estabelecer uma ligação, visite {website_link}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "Manter configurações da impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 msgctxt "@action:button" msgid "Remove printers" msgstr "Remover impressoras" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "A impressora {printer_name} vai ser removida até à próxima sincronização de conta." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "Para remover a impressora {printer_name} de forma permanente, visite {digital_factory_link}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "Tem a certeza de que pretende remover a impressora {printer_name} temporariamente?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460 msgctxt "@title:window" msgid "Remove printers?" msgstr "Remover impressoras?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463 #, python-brace-format msgctxt "@label" msgid "" @@ -1448,2175 +1115,2514 @@ msgid "" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" -msgstr[0] "Está prestes a remover {0} impressora do Cura. Esta ação não pode ser anulada.\nTem a certeza de que pretende continuar?" -msgstr[1] "Está prestes a remover {0} impressoras do Cura. Esta ação não pode ser anulada.\nTem a certeza de que pretende continuar?" +msgstr[0] "" +"Está prestes a remover {0} impressora do Cura. Esta ação não pode ser anulada.\n" +"Tem a certeza de que pretende continuar?" +msgstr[1] "" +"Está prestes a remover {0} impressoras do Cura. Esta ação não pode ser anulada.\n" +"Tem a certeza de que pretende continuar?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "Está prestes a remover todas as impressoras do Cura. Esta ação não pode ser anulada.Tem a certeza de que pretende continuar?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27 -msgctxt "@info:status" -msgid "Send and monitor print jobs from anywhere using your Ultimaker account." -msgstr "Envie e monitorize trabalhos de impressão a partir de qualquer lugar através da sua conta Ultimaker." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152 +msgctxt "@action:button" +msgid "Print via cloud" +msgstr "Imprimir através da cloud" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33 -msgctxt "@info:status Ultimaker Cloud should not be translated." -msgid "Connect to Ultimaker Digital Factory" -msgstr "Ligar à Ultimaker Digital Factory" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153 +msgctxt "@properties:tooltip" +msgid "Print via cloud" +msgstr "Imprimir através da cloud" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36 -msgctxt "@action" -msgid "Get started" -msgstr "Iniciar" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 +msgctxt "@info:status" +msgid "Connected via cloud" +msgstr "Ligada através da cloud" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264 +#, python-brace-format +msgctxt "@error:send" +msgid "Unknown error code when uploading print job: {0}" +msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" -msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." -msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente." +msgid "tomorrow" +msgstr "amanhã" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 -msgctxt "@info:title" -msgid "Update your printer" -msgstr "Atualizar a impressora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 +msgctxt "@info:status" +msgid "today" +msgstr "hoje" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 -#, python-brace-format +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" -msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." -msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}." +msgid "Sending Print Job" +msgstr "A enviar trabalho de impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 -msgctxt "@info:title" -msgid "Sending materials to printer" -msgstr "Enviar materiais para a impressora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 +msgctxt "@info:status" +msgid "Uploading print job to printer." +msgstr "Carregar um trabalho de impressão na impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "Está a tentar ligar a {0}, mas esta não é Host de um grupo. Pode visitar a página Web para a configurar como Host do grupo." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Não é Host do grupo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35 msgctxt "@action" msgid "Configure group" msgstr "Configurar grupo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27 +msgctxt "@info:status" +msgid "Send and monitor print jobs from anywhere using your Ultimaker account." +msgstr "Envie e monitorize trabalhos de impressão a partir de qualquer lugar através da sua conta Ultimaker." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33 +msgctxt "@info:status Ultimaker Cloud should not be translated." +msgid "Connect to Ultimaker Digital Factory" +msgstr "Ligar à Ultimaker Digital Factory" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36 +msgctxt "@action" +msgid "Get started" +msgstr "Iniciar" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Aguarde até o trabalho atual ter sido enviado." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Erro de impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Não foi possível carregar os dados para a impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Erro de rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 +#, python-brace-format msgctxt "@info:status" -msgid "Sending Print Job" -msgstr "A enviar trabalho de impressão" +msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." +msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 -msgctxt "@info:status" -msgid "Uploading print job to printer." -msgstr "Carregar um trabalho de impressão na impressora." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 +msgctxt "@info:title" +msgid "Sending materials to printer" +msgstr "Enviar materiais para a impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "A fila de trabalhos de impressão está cheia. A impressora não consegue aceitar um novo trabalho." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "Fila cheia" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "O trabalho de impressão foi enviado com sucesso para a impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Dados Enviados" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 +msgctxt "@info:status" +msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." +msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 +msgctxt "@info:title" +msgid "Update your printer" +msgstr "Atualizar a impressora" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Imprimir através da rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Imprimir através da rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "Ligado através da rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" -msgid "Connect via Network" -msgstr "Ligar Através da Rede" +msgid "Select upgrades" +msgstr "Selecionar atualizações" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 -msgctxt "@info:status" -msgid "tomorrow" -msgstr "amanhã" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 +msgctxt "@action" +msgid "Level build plate" +msgstr "Nivelar base de construção" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 -msgctxt "@info:status" -msgid "today" -msgstr "hoje" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203 +msgctxt "@title:tab" +msgid "Recommended" +msgstr "Recomendado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 -msgctxt "@item:inmenu" -msgid "USB printing" -msgstr "Impressão USB" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205 +msgctxt "@title:tab" +msgid "Custom" +msgstr "Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 -msgctxt "@action:button Preceded by 'Ready to'." -msgid "Print via USB" -msgstr "Imprimir por USB" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535 +#, python-brace-format +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead." +msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos." -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 -msgctxt "@info:tooltip" -msgid "Print via USB" -msgstr "Imprimir por USB" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538 +msgctxt "@info:title" +msgid "Open Project File" +msgstr "Abrir ficheiro de projeto" -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 -msgctxt "@info:status" -msgid "Connected via USB" -msgstr "Ligado via USB" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>." +msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>." -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 -msgctxt "@label" -msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" -msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642 +msgctxt "@info:title" +msgid "Can't Open Project File" +msgstr "Não é possível abrir o ficheiro de projeto" -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 -msgctxt "@message" -msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." -msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída." +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tags <filename> or <message>!" +msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 -msgctxt "@message" -msgid "Print in Progress" -msgstr "Impressão em curso" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693 +#, python-brace-format +msgctxt "@info:error Don't translate the XML tag <filename>!" +msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura." +msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura." -#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" -msgid "X3D File" -msgstr "Ficheiro X3D" +msgid "3MF File" +msgstr "Ficheiro 3MF" -#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17 msgctxt "@item:inlistbox" -msgid "X-Ray view" -msgstr "Vista Raio-X" +msgid "Compressed G-code File" +msgstr "Ficheiro G-code comprimido" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22 -msgctxt "@info:tooltip" -msgid "Some things could be problematic in this print. Click to see tips for adjustment." -msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão." +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 +msgctxt "@error:not supported" +msgid "GCodeGzWriter does not support text mode." +msgstr "O GCodeGzWriter não suporta modo de texto." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14 -msgctxt "@title:window" -msgid "Open Project" -msgstr "Abrir Projeto" +#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31 +msgctxt "@info:title" +msgid "3D Model Assistant" +msgstr "Assistente de Modelos 3D" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61 -msgctxt "@action:ComboBox Update/override existing profile" -msgid "Update existing" -msgstr "Atualizar existente" +# rever! +#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96 +#, python-brace-format +msgctxt "@info:status" +msgid "" +"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n" +"<p>{model_names}</p>\n" +"<p>Find out how to ensure the best possible print quality and reliability.</p>\n" +"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>" +msgstr "" +"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n" +"<p>{model_names}</p>\n" +"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n" +"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62 -msgctxt "@action:ComboBox Save settings in a new profile" -msgid "Create new" -msgstr "Criar nova" +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 +msgctxt "@info" +msgid "Could not access update information." +msgstr "Não foi possível aceder às informações de atualização." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69 -msgctxt "@action:title" -msgid "Summary - Cura Project" -msgstr "Resumo – Projeto Cura" +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 +#, python-brace-format +msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" +msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}." +msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93 -msgctxt "@action:label" -msgid "Printer settings" -msgstr "Definições da impressora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 +#, python-format +msgctxt "@info:title The %s gets replaced with the printer name." +msgid "New %s firmware available" +msgstr "Novo firmware para %s está disponível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112 -msgctxt "@info:tooltip" -msgid "How should the conflict in the machine be resolved?" -msgstr "Como deve ser resolvido o conflito da máquina?" +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 +msgctxt "@action:button" +msgid "How to update" +msgstr "Como atualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102 -msgctxt "@action:label" -msgid "Type" -msgstr "Tipo" +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18 +msgctxt "@item:inlistbox" +msgid "G File" +msgstr "Ficheiro G" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 -msgctxt "@action:label" -msgid "Printer Group" -msgstr "Grupo da Impressora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347 +msgctxt "@info:status" +msgid "Parsing G-code" +msgstr "A analisar G-code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218 -msgctxt "@action:label" -msgid "Profile settings" -msgstr "Definições do perfil" +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503 +msgctxt "@info:title" +msgid "G-code Details" +msgstr "Detalhes do G-code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501 +msgctxt "@info:generic" +msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." +msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12 +msgctxt "@label" +msgid "Support Blocker" +msgstr "Remover Suportes" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" -msgid "How should the conflict in the profile be resolved?" -msgstr "Como deve ser resolvido o conflito no perfil?" +msgid "Create a volume in which supports are not printed." +msgstr "Criar um volume dentro do qual não são impressos suportes." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242 -msgctxt "@action:label" -msgid "Name" -msgstr "Nome" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15 +msgctxt "@item:inlistbox 'Open' is part of the name of this file format." +msgid "Open Compressed Triangle Mesh" +msgstr "Open Compressed Triangle Mesh" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259 -msgctxt "@action:label" -msgid "Intent" -msgstr "Intent" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19 +msgctxt "@item:inlistbox" +msgid "COLLADA Digital Asset Exchange" +msgstr "COLLADA Digital Asset Exchange" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 -msgctxt "@action:label" -msgid "Not in profile" -msgstr "Inexistente no perfil" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23 +msgctxt "@item:inlistbox" +msgid "glTF Binary" +msgstr "glTF Binary" -# rever! -# contexto?! -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231 -msgctxt "@action:label" -msgid "%1 override" -msgid_plural "%1 overrides" -msgstr[0] "%1 substituição" -msgstr[1] "%1 substituições" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27 +msgctxt "@item:inlistbox" +msgid "glTF Embedded JSON" +msgstr "glTF Embedded JSON" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287 -msgctxt "@action:label" -msgid "Derivative from" -msgstr "Derivado de" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36 +msgctxt "@item:inlistbox" +msgid "Stanford Triangle Format" +msgstr "Stanford Triangle Format" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292 -msgctxt "@action:label" -msgid "%1, %2 override" -msgid_plural "%1, %2 overrides" -msgstr[0] "%1, %2 substituição" -msgstr[1] "%1, %2 substituições" +#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40 +msgctxt "@item:inlistbox" +msgid "Compressed COLLADA Digital Asset Exchange" +msgstr "Compressed COLLADA Digital Asset Exchange" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309 -msgctxt "@action:label" -msgid "Material settings" -msgstr "Definições de material" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28 +msgctxt "@item:inlistbox" +msgid "Ultimaker Format Package" +msgstr "Arquivo Ultimaker Format" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 -msgctxt "@info:tooltip" -msgid "How should the conflict in the material be resolved?" -msgstr "Como deve ser resolvido o conflito no material?" +#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14 +msgctxt "@item:inlistbox" +msgid "Cura 15.04 profiles" +msgstr "Perfis Cura 15.04" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369 -msgctxt "@action:label" -msgid "Setting visibility" -msgstr "Visibilidade das definições" +#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12 +msgctxt "@item:inmenu" +msgid "Prepare" +msgstr "Preparar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378 -msgctxt "@action:label" -msgid "Mode" -msgstr "Modo" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14 +msgctxt "@item:inmenu" +msgid "Monitor" +msgstr "Monitorizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394 -msgctxt "@action:label" -msgid "Visible settings:" -msgstr "Definições visíveis:" +#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12 +msgctxt "@item:inlistbox" +msgid "X-Ray view" +msgstr "Vista Raio-X" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399 -msgctxt "@action:label" -msgid "%1 out of %2" -msgstr "%1 de %2" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206 +msgctxt "@error:zip" +msgid "Error writing 3mf file." +msgstr "Erro ao gravar ficheiro 3mf." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425 -msgctxt "@action:warning" -msgid "Loading a project will clear all models on the build plate." -msgstr "Abrir um projeto irá apagar todos os modelos na base de construção." +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26 +msgctxt "@item:inlistbox" +msgid "3MF file" +msgstr "Ficheiro 3MF" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453 -msgctxt "@action:button" -msgid "Open" -msgstr "Abrir" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34 +msgctxt "@item:inlistbox" +msgid "Cura Project 3MF file" +msgstr "Ficheiro 3MF de Projeto Cura" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 -msgctxt "@button" -msgid "Want more?" -msgstr "Deseja mais?" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 +msgctxt "@error:zip" +msgid "3MF Writer plug-in is corrupt." +msgstr "O plug-in Gravador 3MF está danificado." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 -msgctxt "@button" -msgid "Backup Now" -msgstr "Efetuar cópia de segurança agora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 +msgctxt "@error:zip" +msgid "No permission to write the workspace here." +msgstr "Não tem permissão para escrever o espaço de trabalho aqui." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 -msgctxt "@checkbox:description" -msgid "Auto Backup" -msgstr "Efetuar cópia de segurança automaticamente" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96 +msgctxt "@error:zip" +msgid "The operating system does not allow saving a project file to this location or with this file name." +msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 -msgctxt "@checkbox:description" -msgid "Automatically create a backup each day that Cura is started." -msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado." +#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13 +msgctxt "@item:inmenu" +msgid "Preview" +msgstr "Pré-visualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71 -msgctxt "@button" -msgid "Restore" -msgstr "Restaurar" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15 +msgctxt "@item:inlistbox" +msgid "Layer view" +msgstr "Vista Camadas" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99 -msgctxt "@dialog:title" -msgid "Delete Backup" -msgstr "Eliminar cópia de segurança" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124 +msgctxt "@info:status" +msgid "Cura does not accurately display layers when Wire Printing is enabled." +msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100 -msgctxt "@dialog:info" -msgid "Are you sure you want to delete this backup? This cannot be undone." -msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada." +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125 +msgctxt "@info:title" +msgid "Simulation View" +msgstr "Visualização por Camadas" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108 -msgctxt "@dialog:title" -msgid "Restore Backup" -msgstr "Restaurar cópia de segurança" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126 +msgctxt "@info:status" +msgid "Nothing is shown because you need to slice first." +msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109 -msgctxt "@dialog:info" -msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" -msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126 +msgctxt "@info:title" +msgid "No layers to show" +msgstr "Sem camadas para visualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 -msgctxt "@backuplist:label" -msgid "Cura Version" -msgstr "Versão do Cura" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74 +msgctxt "@info:option_text" +msgid "Do not show this message again" +msgstr "Não mostrar esta mensagem novamente" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 -msgctxt "@backuplist:label" -msgid "Machines" -msgstr "Máquinas" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 +msgctxt "@action" +msgid "Machine Settings" +msgstr "Definições da Máquina" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 -msgctxt "@backuplist:label" -msgid "Materials" -msgstr "Materiais" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12 +msgctxt "@item:inmenu" +msgid "Solid view" +msgstr "Vista Sólidos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 -msgctxt "@backuplist:label" -msgid "Profiles" -msgstr "Perfis" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71 +msgctxt "@info:status" +msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 -msgctxt "@backuplist:label" -msgid "Plugins" -msgstr "Plug-ins" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73 +msgctxt "@info:title" +msgid "Model Errors" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25 -msgctxt "@title:window" -msgid "Cura Backups" -msgstr "Cópias de segurança do Cura" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79 +msgctxt "@action:button" +msgid "Learn more" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 -msgctxt "@title" -msgid "My Backups" -msgstr "As minhas cópias de segurança" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134 +msgctxt "@info:error" +msgid "Can't write to UFP file:" +msgstr "Não é possível escrever no ficheiro UFP:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 -msgctxt "@empty_state" -msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." -msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma." +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74 +msgctxt "@error:not supported" +msgid "GCodeWriter does not support non-text mode." +msgstr "O GCodeWriter não suporta modo sem texto." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 -msgctxt "@backup_limit_info" -msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." -msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas." +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80 +#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96 +msgctxt "@warning:status" +msgid "Please prepare G-code before exporting." +msgstr "Prepare um G-code antes de exportar." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 -msgctxt "@description" -msgid "Backup and synchronize your Cura settings." -msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura." +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14 +msgctxt "@item:inlistbox" +msgid "JPG Image" +msgstr "Imagem JPG" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125 -msgctxt "@button" -msgid "Sign in" -msgstr "Iniciar sessão" +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18 +msgctxt "@item:inlistbox" +msgid "JPEG Image" +msgstr "Imagem JPEG" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22 +msgctxt "@item:inlistbox" +msgid "PNG Image" +msgstr "Imagem PNG" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26 +msgctxt "@item:inlistbox" +msgid "BMP Image" +msgstr "Imagem BMP" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30 +msgctxt "@item:inlistbox" +msgid "GIF Image" +msgstr "Imagem GIF" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23 +msgctxt "@info:backup_status" +msgid "There was an error trying to restore your backup." +msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 +msgctxt "@info:title" +msgid "Backups" +msgstr "Cópias de segurança" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27 +msgctxt "@info:backup_status" +msgid "There was an error while uploading your backup." +msgstr "Ocorreu um erro ao carregar a sua cópia de segurança." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47 +msgctxt "@info:backup_status" +msgid "Creating your backup..." +msgstr "A criar a cópia de segurança..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54 +msgctxt "@info:backup_status" +msgid "There was an error while creating your backup." +msgstr "Ocorreu um erro ao criar a cópia de segurança." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58 +msgctxt "@info:backup_status" +msgid "Uploading your backup..." +msgstr "A carregar a sua cópia de segurança..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68 +msgctxt "@info:backup_status" +msgid "Your backup has finished uploading." +msgstr "A cópia de segurança terminou o seu carregamento." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107 +msgctxt "@error:file_size" +msgid "The backup exceeds the maximum file size." +msgstr "A cópia de segurança excede o tamanho de ficheiro máximo." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64 +msgctxt "@item:inmenu" +msgid "Manage backups" +msgstr "Gerir cópias de segurança" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Atualizar firmware" # rever! -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "O firmware é o software que é executado diretamente na sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e basicamente assegura o funcionamento da sua impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "O firmware que é expedido com as novas impressoras funciona corretamente, mas as novas versões costumam ter mais funcionalidades e melhorias." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Atualizar firmware automaticamente" -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Carregar firmware personalizado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "O firmware não pode ser atualizado por não existir ligação com a impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "O firmware não pode ser atualizado porque a ligação com a impressora não suporta a atualização de firmware." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Selecionar firmware personalizado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119 msgctxt "@title:window" msgid "Firmware Update" msgstr "Atualização de firmware" -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Updating firmware." msgstr "A atualizar firmware." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update completed." msgstr "Atualização de firmware concluída." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "A atualização de firmware falhou devido a um erro desconhecido." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "A atualização de firmware falhou devido a um erro de comunicação." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "A atualização de firmware falhou devido a um erro de entrada/saída." -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "A atualização de firmware falhou devido à ausência de firmware." -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19 -msgctxt "@title:window" -msgid "Convert Image..." -msgstr "Converter imagem..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19 +msgctxt "@title" +msgid "Marketplace" +msgstr "Mercado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33 -msgctxt "@info:tooltip" -msgid "The maximum distance of each pixel from \"Base.\"" -msgstr "A distância máxima de cada pixel desde a \"Base\"" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36 +msgctxt "@label" +msgid "You need to accept the license to install the package" +msgstr "É necessário aceitar a licença para instalar o pacote" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38 -msgctxt "@action:label" -msgid "Height (mm)" -msgstr "Altura (mm)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14 +msgctxt "@title" +msgid "Changes from your account" +msgstr "Alterações feitas desde a sua conta" -# rever! -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56 -msgctxt "@info:tooltip" -msgid "The base height from the build plate in millimeters." -msgstr "A altura da \"Base\" desde a base de construção em milímetros." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 +msgctxt "@button" +msgid "Dismiss" +msgstr "Descartar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61 -msgctxt "@action:label" -msgid "Base (mm)" -msgstr "Base (mm)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 +msgctxt "@button" +msgid "Next" +msgstr "Seguinte" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79 -msgctxt "@info:tooltip" -msgid "The width in millimeters on the build plate." -msgstr "A largura em milímetros na base de construção." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52 +msgctxt "@label" +msgid "The following packages will be added:" +msgstr "Os seguintes pacotes vão ser instalados:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84 -msgctxt "@action:label" -msgid "Width (mm)" -msgstr "Largura (mm)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97 +msgctxt "@label" +msgid "The following packages can not be installed because of an incompatible Cura version:" +msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103 -msgctxt "@info:tooltip" -msgid "The depth in millimeters on the build plate" -msgstr "A profundidade em milímetros na base de construção" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20 +msgctxt "@title:window" +msgid "Confirm uninstall" +msgstr "Confirmar desinstalação" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108 -msgctxt "@action:label" -msgid "Depth (mm)" -msgstr "Profundidade (mm)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50 +msgctxt "@text:window" +msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." +msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas." -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126 -msgctxt "@info:tooltip" -msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." -msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51 +msgctxt "@text:window" +msgid "Materials" +msgstr "Materiais" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 -msgctxt "@item:inlistbox" -msgid "Darker is higher" -msgstr "Mais escuro é mais alto" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52 +msgctxt "@text:window" +msgid "Profiles" +msgstr "Perfis" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 -msgctxt "@item:inlistbox" -msgid "Lighter is higher" -msgstr "Mais claro é mais alto" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90 +msgctxt "@action:button" +msgid "Confirm" +msgstr "Confirmar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149 -msgctxt "@info:tooltip" -msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." -msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16 +msgctxt "@info" +msgid "Could not connect to the Cura Package database. Please check your connection." +msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação." -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 -msgctxt "@item:inlistbox" -msgid "Linear" -msgstr "Linear" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 +msgctxt "@label" +msgid "Community Contributions" +msgstr "Contribuições comunitárias" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 -msgctxt "@item:inlistbox" -msgid "Translucency" -msgstr "Translucidez" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 +msgctxt "@label" +msgid "Community Plugins" +msgstr "Plug-ins comunitários" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171 -msgctxt "@info:tooltip" -msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." -msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42 +msgctxt "@label" +msgid "Generic Materials" +msgstr "Materiais genéricos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177 -msgctxt "@action:label" -msgid "1mm Transmittance (%)" -msgstr "(%) transmitância de 1 mm" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89 +msgctxt "@label" +msgid "Version" +msgstr "Versão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195 -msgctxt "@info:tooltip" -msgid "The amount of smoothing to apply to the image." -msgstr "A quantidade de suavização a aplicar à imagem." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96 +msgctxt "@label" +msgid "Last updated" +msgstr "Actualizado em" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200 -msgctxt "@action:label" -msgid "Smoothing" -msgstr "Suavização" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 +msgctxt "@label" +msgid "Brand" +msgstr "Marca" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 -msgctxt "@action:button" -msgid "OK" -msgstr "OK" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110 +msgctxt "@label" +msgid "Downloads" +msgstr "Transferências" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33 msgctxt "@title:tab" -msgid "Printer" -msgstr "Impressora" +msgid "Installed plugins" +msgstr "Plug-ins instalados" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 -msgctxt "@title:label" -msgid "Nozzle Settings" -msgstr "Definições do nozzle" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72 +msgctxt "@info" +msgid "No plugin has been installed." +msgstr "Não foi instalado qualquer plug-in." -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 -msgctxt "@label" -msgid "Nozzle size" -msgstr "Tamanho do nozzle" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86 +msgctxt "@title:tab" +msgid "Installed materials" +msgstr "Materiais instalados" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 -msgctxt "@label" -msgid "mm" -msgstr "mm" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125 +msgctxt "@info" +msgid "No material has been installed." +msgstr "Não foi instalado qualquer material." -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 -msgctxt "@label" -msgid "Compatible material diameter" -msgstr "Diâmetro do material compatível" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139 +msgctxt "@title:tab" +msgid "Bundled plugins" +msgstr "Plug-ins em pacote" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 -msgctxt "@label" -msgid "Nozzle offset X" -msgstr "Desvio X do Nozzle" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184 +msgctxt "@title:tab" +msgid "Bundled materials" +msgstr "Materiais em pacote" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95 msgctxt "@label" -msgid "Nozzle offset Y" -msgstr "Desvio Y do Nozzle" +msgid "Website" +msgstr "Site" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102 msgctxt "@label" -msgid "Cooling Fan Number" -msgstr "Número de ventoinha de arrefecimento" +msgid "Email" +msgstr "E-mail" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 -msgctxt "@title:label" -msgid "Extruder Start G-code" -msgstr "G-code inicial do extrusor" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22 +msgctxt "@description" +msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise" +msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 -msgctxt "@title:label" -msgid "Extruder End G-code" -msgstr "G-code final do extrusor" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53 +msgctxt "@button" +msgid "Sign in" +msgstr "Iniciar sessão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 -msgctxt "@title:label" -msgid "Printer Settings" -msgstr "Definições da impressora" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17 +msgctxt "@info" +msgid "Fetching packages..." +msgstr "A obter pacotes..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34 msgctxt "@label" -msgid "X (Width)" -msgstr "X (Largura)" +msgid "Compatibility" +msgstr "Compatibilidade" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 -msgctxt "@label" -msgid "Y (Depth)" -msgstr "Y (Profundidade)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124 +msgctxt "@label:table_header" +msgid "Machine" +msgstr "Máquina" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 -msgctxt "@label" -msgid "Z (Height)" -msgstr "Z (Altura)" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137 +msgctxt "@label:table_header" +msgid "Build Plate" +msgstr "Base de construção" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 -msgctxt "@label" -msgid "Build plate shape" -msgstr "Forma da base de construção" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143 +msgctxt "@label:table_header" +msgid "Support" +msgstr "Suportes" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 -msgctxt "@label" -msgid "Origin at center" -msgstr "Origem no centro" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149 +msgctxt "@label:table_header" +msgid "Quality" +msgstr "Qualidade" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 -msgctxt "@label" -msgid "Heated bed" -msgstr "Base aquecida" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170 +msgctxt "@action:label" +msgid "Technical Data Sheet" +msgstr "Ficha técnica" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 -msgctxt "@label" -msgid "Heated build volume" -msgstr "Volume de construção aquecido" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179 +msgctxt "@action:label" +msgid "Safety Data Sheet" +msgstr "Ficha de segurança" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 -msgctxt "@label" -msgid "G-code flavor" -msgstr "Variante do G-code" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188 +msgctxt "@action:label" +msgid "Printing Guidelines" +msgstr "Instruções de impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 -msgctxt "@title:label" -msgid "Printhead Settings" -msgstr "Definições da cabeça de impressão" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197 +msgctxt "@action:label" +msgid "Website" +msgstr "Site" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 -msgctxt "@label" -msgid "X min" -msgstr "X mín" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30 +msgctxt "@title:tab" +msgid "Plugins" +msgstr "Plug-ins" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 -msgctxt "@label" -msgid "Y min" -msgstr "Y mín" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457 +msgctxt "@title:tab" +msgid "Materials" +msgstr "Materiais" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 -msgctxt "@label" -msgid "X max" -msgstr "X máx" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58 +msgctxt "@title:tab" +msgid "Installed" +msgstr "Instalado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 -msgctxt "@label" -msgid "Y max" -msgstr "Y máx" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 +msgctxt "@info:tooltip" +msgid "Go to Web Marketplace" +msgstr "Ir para Mercado na Web" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22 msgctxt "@label" -msgid "Gantry Height" -msgstr "Altura do pórtico" +msgid "Will install upon restarting" +msgstr "Será instalado após reiniciar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 -msgctxt "@label" -msgid "Number of Extruders" -msgstr "Número de Extrusores" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 +msgctxt "@action:button" +msgid "Update" +msgstr "Atualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374 -msgctxt "@title:label" -msgid "Start G-code" -msgstr "G-code inicial" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 +msgctxt "@action:button" +msgid "Updating" +msgstr "A Actualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385 -msgctxt "@title:label" -msgid "End G-code" -msgstr "G-code final" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 +msgctxt "@action:button" +msgid "Updated" +msgstr "Atualizado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100 -msgctxt "@info" -msgid "" -"Please make sure your printer has a connection:\n" -"- Check if the printer is turned on.\n" -"- Check if the printer is connected to the network.\n" -"- Check if you are signed in to discover cloud-connected printers." -msgstr "" -"Certifique-se de que é possível estabelecer ligação com a impressora:\n" -"- Verifique se a impressora está ligada.\n" -"- Verifique se a impressora está ligada à rede.\n" -"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud." +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53 +msgctxt "@label:The string between <a href=> and </a> is the highlighted link" +msgid "<a href='%1'>Log in</a> is required to update" +msgstr "É necessário <a href='%1'>Log in</a> para atualizar" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 +msgctxt "@action:button" +msgid "Downgrade" +msgstr "Repor Versão Anterior" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 +msgctxt "@action:button" +msgid "Uninstall" +msgstr "Desinstalar" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 +msgctxt "@action:button" +msgid "Installed" +msgstr "Instalado" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56 +msgctxt "@label:The string between <a href=> and </a> is the highlighted link" +msgid "<a href='%1'>Log in</a> is required to install or update" +msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80 +msgctxt "@label:The string between <a href=> and </a> is the highlighted link" +msgid "<a href='%1'>Buy material spools</a>" +msgstr "<a href='%1'>Comprar bobinas de material</a>" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117 +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27 +msgctxt "@label" +msgid "Premium" +msgstr "Premium" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42 +msgctxt "@label" +msgid "Search materials" +msgstr "Procurar materiais" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19 msgctxt "@info" -msgid "Please connect your printer to the network." -msgstr "Ligue a impressora à sua rede." +msgid "You will need to restart Cura before changes in packages have effect." +msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas." -#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155 -msgctxt "@label link to technical assistance" -msgid "View user manuals online" -msgstr "Ver manuais do utilizador online" +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46 +msgctxt "@info:button, %1 is the application name" +msgid "Quit %1" +msgstr "Sair %1" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25 +msgctxt "@action:button" +msgid "Back" +msgstr "Anterior" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18 +msgctxt "@action:button" +msgid "Install" +msgstr "Instalar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42 msgctxt "@label" msgid "Mesh Type" msgstr "Tipo de Objecto" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82 msgctxt "@label" msgid "Normal model" msgstr "Modelo normal" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94 msgctxt "@label" msgid "Print as support" msgstr "Imprimir como suporte" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "Modificar definições para sobreposições" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118 msgctxt "@label" msgid "Don't support overlaps" msgstr "Não suportar sobreposições" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "Apenas objeto de enchimento" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "Malha de corte" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380 msgctxt "@action:button" msgid "Select settings" msgstr "Selecionar definições" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Selecionar definições a personalizar para este modelo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94 msgctxt "@label:textbox" msgid "Filter..." msgstr "Filtrar..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68 msgctxt "@label:checkbox" msgid "Show all" msgstr "Mostrar tudo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Plug-in de pós-processamento" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Scripts de pós-processamento" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233 msgctxt "@action" msgid "Add a script" msgstr "Adicionar um script" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279 msgctxt "@label" msgid "Settings" msgstr "Definições" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "Altere os scripts de pós-processamento." -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503 +#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "O script a seguir está ativo:" msgstr[1] "Os seguintes scripts estão ativos:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 -msgctxt "@label" -msgid "Color scheme" -msgstr "Esquema de cores" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107 -msgctxt "@label:listbox" -msgid "Material Color" -msgstr "Cor do Material" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111 -msgctxt "@label:listbox" -msgid "Line Type" -msgstr "Tipo de Linha" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115 -msgctxt "@label:listbox" -msgid "Speed" -msgstr "Velocidade" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119 -msgctxt "@label:listbox" -msgid "Layer thickness" -msgstr "Espessura da Camada" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156 -msgctxt "@label" -msgid "Compatibility Mode" -msgstr "Modo Compatibilidade" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230 -msgctxt "@label" -msgid "Travels" -msgstr "Deslocações" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236 -msgctxt "@label" -msgid "Helpers" -msgstr "Auxiliares" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31 msgctxt "@label" -msgid "Shell" -msgstr "Invólucro" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 -msgctxt "@label" -msgid "Infill" -msgstr "Enchimento" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298 -msgctxt "@label" -msgid "Only Show Top Layers" -msgstr "Só Camadas Superiores" +msgid "Queued" +msgstr "Em fila" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308 -msgctxt "@label" -msgid "Show 5 Detailed Layers On Top" -msgstr "5 Camadas Superiores Detalhadas" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66 +msgctxt "@label link to connect manager" +msgid "Manage in browser" +msgstr "Gerir no browser" -# rever! -# todas as strings com a frase -# Topo / Base ?? -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 msgctxt "@label" -msgid "Top / Bottom" -msgstr "Superior / Inferior" +msgid "There are no print jobs in the queue. Slice and send a job to add one." +msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie." -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110 msgctxt "@label" -msgid "Inner Wall" -msgstr "Parede Interior" +msgid "Print jobs" +msgstr "Trabalhos em Impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122 msgctxt "@label" -msgid "min" -msgstr "mín" +msgid "Total print time" +msgstr "Tempo de impressão total" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134 msgctxt "@label" -msgid "max" -msgstr "máx" +msgid "Waiting for" +msgstr "A aguardar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" -msgid "More information on anonymous data collection" -msgstr "Mais informações sobre a recolha anónima de dados" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 -msgctxt "@text:window" -msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" -msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 -msgctxt "@text:window" -msgid "I don't want to send anonymous data" -msgstr "Não pretendo enviar dados anónimos" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 -msgctxt "@text:window" -msgid "Allow sending anonymous data" -msgstr "Permitir o envio de dados anónimos" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25 -msgctxt "@action:button" -msgid "Back" -msgstr "Anterior" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34 -msgctxt "@label" -msgid "Compatibility" -msgstr "Compatibilidade" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124 -msgctxt "@label:table_header" -msgid "Machine" -msgstr "Máquina" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137 -msgctxt "@label:table_header" -msgid "Build Plate" -msgstr "Base de construção" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143 -msgctxt "@label:table_header" -msgid "Support" -msgstr "Suportes" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149 -msgctxt "@label:table_header" -msgid "Quality" -msgstr "Qualidade" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170 -msgctxt "@action:label" -msgid "Technical Data Sheet" -msgstr "Ficha técnica" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179 -msgctxt "@action:label" -msgid "Safety Data Sheet" -msgstr "Ficha de segurança" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188 -msgctxt "@action:label" -msgid "Printing Guidelines" -msgstr "Instruções de impressão" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197 -msgctxt "@action:label" -msgid "Website" -msgstr "Site" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 -msgctxt "@action:button" -msgid "Installed" -msgstr "Instalado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56 -msgctxt "@label:The string between <a href=> and </a> is the highlighted link" -msgid "<a href='%1'>Log in</a> is required to install or update" -msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80 -msgctxt "@label:The string between <a href=> and </a> is the highlighted link" -msgid "<a href='%1'>Buy material spools</a>" -msgstr "<a href='%1'>Comprar bobinas de material</a>" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 -msgctxt "@action:button" -msgid "Update" -msgstr "Atualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 -msgctxt "@action:button" -msgid "Updating" -msgstr "A Actualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 -msgctxt "@action:button" -msgid "Updated" -msgstr "Atualizado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27 -msgctxt "@label" -msgid "Premium" -msgstr "Premium" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 -msgctxt "@info:tooltip" -msgid "Go to Web Marketplace" -msgstr "Ir para Mercado na Web" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42 -msgctxt "@label" -msgid "Search materials" -msgstr "Procurar materiais" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19 -msgctxt "@info" -msgid "You will need to restart Cura before changes in packages have effect." -msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46 -msgctxt "@info:button, %1 is the application name" -msgid "Quit %1" -msgstr "Sair %1" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30 -msgctxt "@title:tab" -msgid "Plugins" -msgstr "Plug-ins" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 -msgctxt "@title:tab" -msgid "Materials" -msgstr "Materiais" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58 -msgctxt "@title:tab" -msgid "Installed" -msgstr "Instalado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22 -msgctxt "@label" -msgid "Will install upon restarting" -msgstr "Será instalado após reiniciar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53 -msgctxt "@label:The string between <a href=> and </a> is the highlighted link" -msgid "<a href='%1'>Log in</a> is required to update" -msgstr "É necessário <a href='%1'>Log in</a> para atualizar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 -msgctxt "@action:button" -msgid "Downgrade" -msgstr "Repor Versão Anterior" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 -msgctxt "@action:button" -msgid "Uninstall" -msgstr "Desinstalar" +msgid "Configuration Changes" +msgstr "Alterações na configuração" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 msgctxt "@action:button" -msgid "Install" -msgstr "Instalar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14 -msgctxt "@title" -msgid "Changes from your account" -msgstr "Alterações feitas desde a sua conta" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 -msgctxt "@button" -msgid "Dismiss" -msgstr "Descartar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 -msgctxt "@button" -msgid "Next" -msgstr "Seguinte" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52 -msgctxt "@label" -msgid "The following packages will be added:" -msgstr "Os seguintes pacotes vão ser instalados:" +msgid "Override" +msgstr "Ignorar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85 msgctxt "@label" -msgid "The following packages can not be installed because of an incompatible Cura version:" -msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20 -msgctxt "@title:window" -msgid "Confirm uninstall" -msgstr "Confirmar desinstalação" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50 -msgctxt "@text:window" -msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." -msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51 -msgctxt "@text:window" -msgid "Materials" -msgstr "Materiais" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52 -msgctxt "@text:window" -msgid "Profiles" -msgstr "Perfis" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90 -msgctxt "@action:button" -msgid "Confirm" -msgstr "Confirmar" +msgid "The assigned printer, %1, requires the following configuration change:" +msgid_plural "The assigned printer, %1, requires the following configuration changes:" +msgstr[0] "A impressora atribuída %1 requer a seguinte alteração na configuração:" +msgstr[1] "A impressora atribuída %1 requer as seguintes alterações na configuração:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89 msgctxt "@label" -msgid "You need to accept the license to install the package" -msgstr "É necessário aceitar a licença para instalar o pacote" +msgid "The printer %1 is assigned, but the job contains an unknown material configuration." +msgstr "A impressora %1 está atribuída, mas o trabalho tem uma configuração de material desconhecida." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99 msgctxt "@label" -msgid "Website" -msgstr "Site" +msgid "Change material %1 from %2 to %3." +msgstr "Alterar o material %1 de %2 para %3." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102 msgctxt "@label" -msgid "Email" -msgstr "E-mail" +msgid "Load %3 as material %1 (This cannot be overridden)." +msgstr "Carregar %3 como material %1 (isto não pode ser substituído)." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105 msgctxt "@label" -msgid "Version" -msgstr "Versão" +msgid "Change print core %1 from %2 to %3." +msgstr "Substituir o print core %1 de %2 para %3." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108 msgctxt "@label" -msgid "Last updated" -msgstr "Actualizado em" +msgid "Change build plate to %1 (This cannot be overridden)." +msgstr "Alterar base de construção para %1 (isto não pode ser substituído)." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115 msgctxt "@label" -msgid "Brand" -msgstr "Marca" +msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." +msgstr "Ignorar utilizará as definições especificadas com a configuração da impressora existente. Tal pode resultar numa falha de impressão." -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 msgctxt "@label" -msgid "Downloads" -msgstr "Transferências" +msgid "Glass" +msgstr "Vidro" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156 msgctxt "@label" -msgid "Community Contributions" -msgstr "Contribuições comunitárias" +msgid "Aluminum" +msgstr "Alumínio" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133 msgctxt "@label" -msgid "Community Plugins" -msgstr "Plug-ins comunitários" +msgid "Unavailable printer" +msgstr "Impressora indisponível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135 msgctxt "@label" -msgid "Generic Materials" -msgstr "Materiais genéricos" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16 -msgctxt "@info" -msgid "Could not connect to the Cura Package database. Please check your connection." -msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33 -msgctxt "@title:tab" -msgid "Installed plugins" -msgstr "Plug-ins instalados" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72 -msgctxt "@info" -msgid "No plugin has been installed." -msgstr "Não foi instalado qualquer plug-in." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86 -msgctxt "@title:tab" -msgid "Installed materials" -msgstr "Materiais instalados" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125 -msgctxt "@info" -msgid "No material has been installed." -msgstr "Não foi instalado qualquer material." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139 -msgctxt "@title:tab" -msgid "Bundled plugins" -msgstr "Plug-ins em pacote" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184 -msgctxt "@title:tab" -msgid "Bundled materials" -msgstr "Materiais em pacote" +msgid "First available" +msgstr "Primeira disponível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 msgctxt "@info" -msgid "Fetching packages..." -msgstr "A obter pacotes..." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22 -msgctxt "@description" -msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise" -msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19 -msgctxt "@title" -msgid "Marketplace" -msgstr "Mercado" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 -msgctxt "@title" -msgid "Build Plate Leveling" -msgstr "Nivelamento da Base de Construção" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 -msgctxt "@label" -msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." -msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 -msgctxt "@label" -msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." -msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 -msgctxt "@action:button" -msgid "Start Build Plate Leveling" -msgstr "Iniciar Nivelamento da base de construção" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 -msgctxt "@action:button" -msgid "Move to Next Position" -msgstr "Avançar para Posição Seguinte" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 -msgctxt "@label" -msgid "Please select any upgrades made to this Ultimaker Original" -msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 -msgctxt "@label" -msgid "Heated Build Plate (official kit or self-built)" -msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)" +msgid "Please update your printer's firmware to manage the queue remotely." +msgstr "Atualize o firmware da impressora para gerir a fila remotamente." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Ligar a uma Impressora em Rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Para imprimir diretamente para a sua impressora através da rede, certifique-se de que a impressora está ligada à rede através de um cabo de rede ou através de ligação à rede Wi-Fi. Se não ligar o Cura por rede à impressora, poderá ainda assim utilizar uma unidade USB para transferir ficheiros g-code para a impressora." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Selecione a impressora a partir da lista abaixo:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77 msgctxt "@action:button" msgid "Edit" msgstr "Editar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138 msgctxt "@action:button" msgid "Remove" msgstr "Remover" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96 msgctxt "@action:button" msgid "Refresh" msgstr "Atualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176 msgctxt "@label" msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>" msgstr "Se a sua impressora não estiver na lista, por favor, consulte o <a href='%1'>guia de resolução de problemas de impressão em rede</a>" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "Tipo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "Versão de Firmware" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "Endereço" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Esta impressora não está configurada para alojar um grupo de impressoras." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Esta impressora aloja um grupo de %1 impressoras." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "A impressora neste endereço ainda não respondeu." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283 msgctxt "@action:button" msgid "Connect" msgstr "Ligar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Endereço IP inválido" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Introduza um endereço IP válido." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308 msgctxt "@title:window" msgid "Printer Address" msgstr "Endereço da Impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Introduza o endereço IP da sua impressora na rede." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 -msgctxt "@title:window" -msgid "Configuration Changes" -msgstr "Alterações na configuração" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227 msgctxt "@action:button" -msgid "Override" -msgstr "Ignorar" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85 -msgctxt "@label" -msgid "The assigned printer, %1, requires the following configuration change:" -msgid_plural "The assigned printer, %1, requires the following configuration changes:" -msgstr[0] "A impressora atribuída %1 requer a seguinte alteração na configuração:" -msgstr[1] "A impressora atribuída %1 requer as seguintes alterações na configuração:" - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89 -msgctxt "@label" -msgid "The printer %1 is assigned, but the job contains an unknown material configuration." -msgstr "A impressora %1 está atribuída, mas o trabalho tem uma configuração de material desconhecida." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99 -msgctxt "@label" -msgid "Change material %1 from %2 to %3." -msgstr "Alterar o material %1 de %2 para %3." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102 -msgctxt "@label" -msgid "Load %3 as material %1 (This cannot be overridden)." -msgstr "Carregar %3 como material %1 (isto não pode ser substituído)." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105 -msgctxt "@label" -msgid "Change print core %1 from %2 to %3." -msgstr "Substituir o print core %1 de %2 para %3." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108 -msgctxt "@label" -msgid "Change build plate to %1 (This cannot be overridden)." -msgstr "Alterar base de construção para %1 (isto não pode ser substituído)." +msgid "OK" +msgstr "OK" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115 -msgctxt "@label" -msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." -msgstr "Ignorar utilizará as definições especificadas com a configuração da impressora existente. Tal pode resultar numa falha de impressão." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11 +msgctxt "@title:window" +msgid "Print over network" +msgstr "Imprimir Através da Rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 -msgctxt "@label" -msgid "Glass" -msgstr "Vidro" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52 +msgctxt "@action:button" +msgid "Print" +msgstr "Imprimir" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80 msgctxt "@label" -msgid "Aluminum" -msgstr "Alumínio" +msgid "Printer selection" +msgstr "Seleção de Impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "Mover para o topo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "Eliminar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290 msgctxt "@label" msgid "Resume" msgstr "Retomar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "A colocar em pausa..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "A recomeçar..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294 msgctxt "@label" msgid "Pause" msgstr "Colocar em pausa" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "A cancelar..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "Cancelar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Tem a certeza de que pretende mover %1 para o topo da fila?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 msgctxt "@window:title" msgid "Move print job to top" msgstr "Mover trabalho de impressão para o topo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Tem a certeza de que pretende eliminar %1?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154 msgctxt "@window:title" msgid "Delete print job" msgstr "Eliminar trabalho de impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Tem a certeza de que deseja cancelar %1?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336 msgctxt "@window:title" msgid "Abort print" msgstr "Cancelar impressão" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 +msgctxt "@label:status" +msgid "Aborted" +msgstr "Cancelado" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 +msgctxt "@label:status" +msgid "Finished" +msgstr "Impressão terminada" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 +msgctxt "@label:status" +msgid "Preparing..." +msgstr "A preparar..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 +msgctxt "@label:status" +msgid "Aborting..." +msgstr "A cancelar..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 +msgctxt "@label:status" +msgid "Pausing..." +msgstr "A colocar em pausa..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 +msgctxt "@label:status" +msgid "Paused" +msgstr "Em Pausa" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 +msgctxt "@label:status" +msgid "Resuming..." +msgstr "A recomeçar..." + +# rever! +# ver contexto! +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 +msgctxt "@label:status" +msgid "Action required" +msgstr "Ação necessária" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 +msgctxt "@label:status" +msgid "Finishes %1 at %2" +msgstr "Termina %1 a %2" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Gerir impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 -msgctxt "@info" -msgid "Please update your printer's firmware to manage the queue remotely." -msgstr "Atualize o firmware da impressora para gerir a fila remotamente." - -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" msgid "Loading..." msgstr "A carregar..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 msgctxt "@label:status" msgid "Unavailable" msgstr "Indisponível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Unreachable" msgstr "Inacessível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360 msgctxt "@label:status" msgid "Idle" msgstr "Inativa" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369 msgctxt "@label:status" msgid "Printing" msgstr "A Imprimir" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410 msgctxt "@label" msgid "Untitled" msgstr "Sem título" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431 msgctxt "@label" msgid "Anonymous" msgstr "Anónimo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "Requer alterações na configuração" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496 msgctxt "@action:button" msgid "Details" msgstr "Detalhes" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" -msgid "Unavailable printer" -msgstr "Impressora indisponível" +msgid "Please select any upgrades made to this Ultimaker Original" +msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135 +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 msgctxt "@label" -msgid "First available" -msgstr "Primeira disponível" +msgid "Heated Build Plate (official kit or self-built)" +msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 -msgctxt "@label:status" -msgid "Aborted" -msgstr "Cancelado" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 +msgctxt "@title" +msgid "Build Plate Leveling" +msgstr "Nivelamento da Base de Construção" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 -msgctxt "@label:status" -msgid "Finished" -msgstr "Impressão terminada" +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 +msgctxt "@label" +msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." +msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 -msgctxt "@label:status" -msgid "Preparing..." -msgstr "A preparar..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 +msgctxt "@label" +msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." +msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 -msgctxt "@label:status" -msgid "Aborting..." -msgstr "A cancelar..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 +msgctxt "@action:button" +msgid "Start Build Plate Leveling" +msgstr "Iniciar Nivelamento da base de construção" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 -msgctxt "@label:status" -msgid "Pausing..." -msgstr "A colocar em pausa..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 +msgctxt "@action:button" +msgid "Move to Next Position" +msgstr "Avançar para Posição Seguinte" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 -msgctxt "@label:status" -msgid "Paused" -msgstr "Em Pausa" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 +msgctxt "@title:window" +msgid "Open Project" +msgstr "Abrir Projeto" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 -msgctxt "@label:status" -msgid "Resuming..." -msgstr "A recomeçar..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62 +msgctxt "@action:ComboBox Update/override existing profile" +msgid "Update existing" +msgstr "Atualizar existente" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63 +msgctxt "@action:ComboBox Save settings in a new profile" +msgid "Create new" +msgstr "Criar nova" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69 +msgctxt "@action:title" +msgid "Summary - Cura Project" +msgstr "Resumo – Projeto Cura" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93 +msgctxt "@action:label" +msgid "Printer settings" +msgstr "Definições da impressora" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113 +msgctxt "@info:tooltip" +msgid "How should the conflict in the machine be resolved?" +msgstr "Como deve ser resolvido o conflito da máquina?" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102 +msgctxt "@action:label" +msgid "Type" +msgstr "Tipo" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 +msgctxt "@action:label" +msgid "Printer Group" +msgstr "Grupo da Impressora" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218 +msgctxt "@action:label" +msgid "Profile settings" +msgstr "Definições do perfil" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221 +msgctxt "@info:tooltip" +msgid "How should the conflict in the profile be resolved?" +msgstr "Como deve ser resolvido o conflito no perfil?" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242 +msgctxt "@action:label" +msgid "Name" +msgstr "Nome" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259 +msgctxt "@action:label" +msgid "Intent" +msgstr "Intent" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 +msgctxt "@action:label" +msgid "Not in profile" +msgstr "Inexistente no perfil" # rever! -# ver contexto! -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 -msgctxt "@label:status" -msgid "Action required" -msgstr "Ação necessária" +# contexto?! +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231 +msgctxt "@action:label" +msgid "%1 override" +msgid_plural "%1 overrides" +msgstr[0] "%1 substituição" +msgstr[1] "%1 substituições" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 -msgctxt "@label:status" -msgid "Finishes %1 at %2" -msgstr "Termina %1 a %2" +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290 +msgctxt "@action:label" +msgid "Derivative from" +msgstr "Derivado de" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295 +msgctxt "@action:label" +msgid "%1, %2 override" +msgid_plural "%1, %2 overrides" +msgstr[0] "%1, %2 substituição" +msgstr[1] "%1, %2 substituições" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312 +msgctxt "@action:label" +msgid "Material settings" +msgstr "Definições de material" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328 +msgctxt "@info:tooltip" +msgid "How should the conflict in the material be resolved?" +msgstr "Como deve ser resolvido o conflito no material?" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373 +msgctxt "@action:label" +msgid "Setting visibility" +msgstr "Visibilidade das definições" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382 +msgctxt "@action:label" +msgid "Mode" +msgstr "Modo" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398 +msgctxt "@action:label" +msgid "Visible settings:" +msgstr "Definições visíveis:" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403 +msgctxt "@action:label" +msgid "%1 out of %2" +msgstr "%1 de %2" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429 +msgctxt "@action:warning" +msgid "Loading a project will clear all models on the build plate." +msgstr "Abrir um projeto irá apagar todos os modelos na base de construção." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457 +msgctxt "@action:button" +msgid "Open" +msgstr "Abrir" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22 +msgctxt "@info:tooltip" +msgid "Some things could be problematic in this print. Click to see tips for adjustment." +msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100 +msgctxt "@info" +msgid "" +"Please make sure your printer has a connection:\n" +"- Check if the printer is turned on.\n" +"- Check if the printer is connected to the network.\n" +"- Check if you are signed in to discover cloud-connected printers." +msgstr "" +"Certifique-se de que é possível estabelecer ligação com a impressora:\n" +"- Verifique se a impressora está ligada.\n" +"- Verifique se a impressora está ligada à rede.\n" +"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117 +msgctxt "@info" +msgid "Please connect your printer to the network." +msgstr "Ligue a impressora à sua rede." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155 +msgctxt "@label link to technical assistance" +msgid "View user manuals online" +msgstr "Ver manuais do utilizador online" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 +msgctxt "@title:window" +msgid "More information on anonymous data collection" +msgstr "Mais informações sobre a recolha anónima de dados" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 +msgctxt "@text:window" +msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" +msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 +msgctxt "@text:window" +msgid "I don't want to send anonymous data" +msgstr "Não pretendo enviar dados anónimos" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 +msgctxt "@text:window" +msgid "Allow sending anonymous data" +msgstr "Permitir o envio de dados anónimos" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 msgctxt "@label" -msgid "Queued" -msgstr "Em fila" +msgid "Color scheme" +msgstr "Esquema de cores" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66 -msgctxt "@label link to connect manager" -msgid "Manage in browser" -msgstr "Gerir no browser" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109 +msgctxt "@label:listbox" +msgid "Material Color" +msgstr "Cor do Material" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113 +msgctxt "@label:listbox" +msgid "Line Type" +msgstr "Tipo de Linha" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117 +msgctxt "@label:listbox" +msgid "Speed" +msgstr "Velocidade" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121 +msgctxt "@label:listbox" +msgid "Layer Thickness" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125 +msgctxt "@label:listbox" +msgid "Line Width" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163 msgctxt "@label" -msgid "There are no print jobs in the queue. Slice and send a job to add one." -msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie." +msgid "Compatibility Mode" +msgstr "Modo Compatibilidade" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237 msgctxt "@label" -msgid "Print jobs" -msgstr "Trabalhos em Impressão" +msgid "Travels" +msgstr "Deslocações" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243 msgctxt "@label" -msgid "Total print time" -msgstr "Tempo de impressão total" +msgid "Helpers" +msgstr "Auxiliares" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249 msgctxt "@label" -msgid "Waiting for" -msgstr "A aguardar" +msgid "Shell" +msgstr "Invólucro" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11 -msgctxt "@title:window" -msgid "Print over network" -msgstr "Imprimir Através da Rede" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 +msgctxt "@label" +msgid "Infill" +msgstr "Enchimento" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52 -msgctxt "@action:button" -msgid "Print" -msgstr "Imprimir" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 +msgctxt "@label" +msgid "Starts" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314 msgctxt "@label" -msgid "Printer selection" -msgstr "Seleção de Impressora" +msgid "Only Show Top Layers" +msgstr "Só Camadas Superiores" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24 -msgctxt "@action:button" -msgid "Sign in" -msgstr "Iniciar sessão" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324 +msgctxt "@label" +msgid "Show 5 Detailed Layers On Top" +msgstr "5 Camadas Superiores Detalhadas" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40 +# rever! +# todas as strings com a frase +# Topo / Base ?? +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338 msgctxt "@label" -msgid "Your key to connected 3D printing" -msgstr "A chave para a impressão 3D em rede" +msgid "Top / Bottom" +msgstr "Superior / Inferior" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51 -msgctxt "@text" -msgid "" -"- Customize your experience with more print profiles and plugins\n" -"- Stay flexible by syncing your setup and loading it anywhere\n" -"- Increase efficiency with a remote workflow on Ultimaker printers" -msgstr "" -"- Personalize a sua experiência com mais perfis e plug-ins de impressão\n" -"- Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local\n" -"- Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342 +msgctxt "@label" +msgid "Inner Wall" +msgstr "Parede Interior" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142 -msgctxt "@button" -msgid "Create account" -msgstr "Criar conta" +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405 +msgctxt "@label" +msgid "min" +msgstr "mín" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28 +#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464 msgctxt "@label" -msgid "Checking..." -msgstr "A verificar..." +msgid "max" +msgstr "máx" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 +msgctxt "@title:label" +msgid "Nozzle Settings" +msgstr "Definições do nozzle" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 msgctxt "@label" -msgid "Account synced" -msgstr "Conta sincronizada" +msgid "Nozzle size" +msgstr "Tamanho do nozzle" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" -msgid "Something went wrong..." -msgstr "Ocorreu um problema..." +msgid "mm" +msgstr "mm" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96 -msgctxt "@button" -msgid "Install pending updates" -msgstr "Instalar atualizações pendentes" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 +msgctxt "@label" +msgid "Compatible material diameter" +msgstr "Diâmetro do material compatível" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118 -msgctxt "@button" -msgid "Check for account updates" -msgstr "Verificar atualizações de conta" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 +msgctxt "@label" +msgid "Nozzle offset X" +msgstr "Desvio X do Nozzle" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81 -msgctxt "@label The argument is a timestamp" -msgid "Last update: %1" -msgstr "Atualização mais recente: %1" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 +msgctxt "@label" +msgid "Nozzle offset Y" +msgstr "Desvio Y do Nozzle" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109 -msgctxt "@button" -msgid "Ultimaker Account" -msgstr "Conta Ultimaker" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 +msgctxt "@label" +msgid "Cooling Fan Number" +msgstr "Número de ventoinha de arrefecimento" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125 -msgctxt "@button" -msgid "Sign Out" -msgstr "Terminar sessão" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163 +msgctxt "@title:label" +msgid "Extruder Start G-code" +msgstr "G-code inicial do extrusor" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177 +msgctxt "@title:label" +msgid "Extruder End G-code" +msgstr "G-code final do extrusor" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 +msgctxt "@title:tab" +msgid "Printer" +msgstr "Impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 +msgctxt "@title:label" +msgid "Printer Settings" +msgstr "Definições da impressora" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 msgctxt "@label" -msgid "No time estimation available" -msgstr "Nenhuma estimativa de tempo disponível" +msgid "X (Width)" +msgstr "X (Largura)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 msgctxt "@label" -msgid "No cost estimation available" -msgstr "Nenhuma estimativa de custos disponível" +msgid "Y (Depth)" +msgstr "Y (Profundidade)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 -msgctxt "@button" -msgid "Preview" -msgstr "Pré-visualizar" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 +msgctxt "@label" +msgid "Z (Height)" +msgstr "Z (Altura)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 msgctxt "@label" -msgid "Time estimation" -msgstr "Estimativa de tempo" +msgid "Build plate shape" +msgstr "Forma da base de construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 msgctxt "@label" -msgid "Material estimation" -msgstr "Estimativa de material" +msgid "Origin at center" +msgstr "Origem no centro" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 -msgctxt "@label m for meter" -msgid "%1m" -msgstr "%1 m" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 +msgctxt "@label" +msgid "Heated bed" +msgstr "Base aquecida" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 -msgctxt "@label g for grams" -msgid "%1g" -msgstr "%1 g" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 +msgctxt "@label" +msgid "Heated build volume" +msgstr "Volume de construção aquecido" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55 -msgctxt "@label:PrintjobStatus" -msgid "Slicing..." -msgstr "A Seccionar..." +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 +msgctxt "@label" +msgid "G-code flavor" +msgstr "Variante do G-code" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67 -msgctxt "@label:PrintjobStatus" -msgid "Unable to slice" -msgstr "Não é possível seccionar" +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 +msgctxt "@title:label" +msgid "Printhead Settings" +msgstr "Definições da cabeça de impressão" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 +msgctxt "@label" +msgid "X min" +msgstr "X mín" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 +msgctxt "@label" +msgid "Y min" +msgstr "Y mín" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 +msgctxt "@label" +msgid "X max" +msgstr "X máx" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 +msgctxt "@label" +msgid "Y max" +msgstr "Y máx" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 +msgctxt "@label" +msgid "Gantry Height" +msgstr "Altura do pórtico" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 +msgctxt "@label" +msgid "Number of Extruders" +msgstr "Número de Extrusores" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345 +msgctxt "@label" +msgid "Apply Extruder offsets to GCode" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393 +msgctxt "@title:label" +msgid "Start G-code" +msgstr "G-code inicial" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404 +msgctxt "@title:label" +msgid "End G-code" +msgstr "G-code final" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19 +msgctxt "@title:window" +msgid "Convert Image..." +msgstr "Converter imagem..." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33 +msgctxt "@info:tooltip" +msgid "The maximum distance of each pixel from \"Base.\"" +msgstr "A distância máxima de cada pixel desde a \"Base\"" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38 +msgctxt "@action:label" +msgid "Height (mm)" +msgstr "Altura (mm)" + +# rever! +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56 +msgctxt "@info:tooltip" +msgid "The base height from the build plate in millimeters." +msgstr "A altura da \"Base\" desde a base de construção em milímetros." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61 +msgctxt "@action:label" +msgid "Base (mm)" +msgstr "Base (mm)" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79 +msgctxt "@info:tooltip" +msgid "The width in millimeters on the build plate." +msgstr "A largura em milímetros na base de construção." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84 +msgctxt "@action:label" +msgid "Width (mm)" +msgstr "Largura (mm)" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103 +msgctxt "@info:tooltip" +msgid "The depth in millimeters on the build plate" +msgstr "A profundidade em milímetros na base de construção" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108 +msgctxt "@action:label" +msgid "Depth (mm)" +msgstr "Profundidade (mm)" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126 +msgctxt "@info:tooltip" +msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." +msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139 +msgctxt "@item:inlistbox" +msgid "Darker is higher" +msgstr "Mais escuro é mais alto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139 +msgctxt "@item:inlistbox" +msgid "Lighter is higher" +msgstr "Mais claro é mais alto" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149 +msgctxt "@info:tooltip" +msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." +msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161 +msgctxt "@item:inlistbox" +msgid "Linear" +msgstr "Linear" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161 +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172 +msgctxt "@item:inlistbox" +msgid "Translucency" +msgstr "Translucidez" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171 +msgctxt "@info:tooltip" +msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." +msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177 +msgctxt "@action:label" +msgid "1mm Transmittance (%)" +msgstr "(%) transmitância de 1 mm" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195 +msgctxt "@info:tooltip" +msgid "The amount of smoothing to apply to the image." +msgstr "A quantidade de suavização a aplicar à imagem." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200 +msgctxt "@action:label" +msgid "Smoothing" +msgstr "Suavização" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 +msgctxt "@title" +msgid "My Backups" +msgstr "As minhas cópias de segurança" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 +msgctxt "@empty_state" +msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." +msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 +msgctxt "@backup_limit_info" +msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." +msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 +msgctxt "@description" +msgid "Backup and synchronize your Cura settings." +msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" -msgid "Processing" -msgstr "A processar" +msgid "Want more?" +msgstr "Deseja mais?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" -msgid "Slice" -msgstr "Segmentação" +msgid "Backup Now" +msgstr "Efetuar cópia de segurança agora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104 -msgctxt "@label" -msgid "Start the slicing process" -msgstr "Iniciar o processo de segmentação" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 +msgctxt "@checkbox:description" +msgid "Auto Backup" +msgstr "Efetuar cópia de segurança automaticamente" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 +msgctxt "@checkbox:description" +msgid "Automatically create a backup each day that Cura is started." +msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado." + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 +msgctxt "@backuplist:label" +msgid "Cura Version" +msgstr "Versão do Cura" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 +msgctxt "@backuplist:label" +msgid "Machines" +msgstr "Máquinas" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 +msgctxt "@backuplist:label" +msgid "Materials" +msgstr "Materiais" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 +msgctxt "@backuplist:label" +msgid "Profiles" +msgstr "Perfis" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118 +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 +msgctxt "@backuplist:label" +msgid "Plugins" +msgstr "Plug-ins" + +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71 msgctxt "@button" -msgid "Cancel" -msgstr "Cancelar" +msgid "Restore" +msgstr "Restaurar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82 -msgctxt "@action:inmenu" -msgid "Show Online Troubleshooting Guide" -msgstr "Mostrar Guia de resolução de problemas online" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99 +msgctxt "@dialog:title" +msgid "Delete Backup" +msgstr "Eliminar cópia de segurança" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89 -msgctxt "@action:inmenu" -msgid "Toggle Full Screen" -msgstr "Alternar para ecrã inteiro" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100 +msgctxt "@dialog:info" +msgid "Are you sure you want to delete this backup? This cannot be undone." +msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97 -msgctxt "@action:inmenu" -msgid "Exit Full Screen" -msgstr "Sair do Ecrã Inteiro" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108 +msgctxt "@dialog:title" +msgid "Restore Backup" +msgstr "Restaurar cópia de segurança" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104 -msgctxt "@action:inmenu menubar:edit" -msgid "&Undo" -msgstr "&Desfazer" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109 +msgctxt "@dialog:info" +msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" +msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114 -msgctxt "@action:inmenu menubar:edit" -msgid "&Redo" -msgstr "&Refazer" +#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25 +msgctxt "@title:window" +msgid "Cura Backups" +msgstr "Cópias de segurança do Cura" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13 +msgctxt "@label:category menu label" +msgid "Material" +msgstr "Material" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54 +msgctxt "@label:category menu label" +msgid "Favorites" +msgstr "Favoritos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79 +msgctxt "@label:category menu label" +msgid "Generic" +msgstr "Genérico" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 +msgctxt "@title:menu menubar:toplevel" +msgid "&File" +msgstr "&Ficheiro" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41 +msgctxt "@title:menu menubar:file" +msgid "&Save Project..." +msgstr "&Guardar projeto..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74 +msgctxt "@title:menu menubar:file" +msgid "&Export..." +msgstr "&Exportar..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85 msgctxt "@action:inmenu menubar:file" -msgid "&Quit" -msgstr "&Sair" +msgid "Export Selection..." +msgstr "Exportar seleção..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132 -msgctxt "@action:inmenu menubar:view" -msgid "3D View" -msgstr "Vista 3D" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Open &Recent" +msgstr "Abrir &Recente" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112 +msgctxt "@label" +msgid "Select configuration" +msgstr "Selecionar configuração" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223 +msgctxt "@label" +msgid "Configurations" +msgstr "Configurações" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 +msgctxt "@header" +msgid "Configurations" +msgstr "Configurações" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25 +msgctxt "@header" +msgid "Custom" +msgstr "Personalizado" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61 +msgctxt "@label" +msgid "Printer" +msgstr "Impressora" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213 +msgctxt "@label" +msgid "Enabled" +msgstr "Ativado" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267 +msgctxt "@label" +msgid "Material" +msgstr "Material" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394 +msgctxt "@label" +msgid "Use glue for better adhesion with this material combination." +msgstr "Utilizar cola para melhor aderência com esta combinação de materiais." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 +msgctxt "@label" +msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." +msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 +msgctxt "@label" +msgid "Marketplace" +msgstr "Mercado" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57 +msgctxt "@label" +msgid "Loading available configurations from the printer..." +msgstr "A carregar as configurações disponíveis da impressora..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58 +msgctxt "@label" +msgid "The configurations are not available because the printer is disconnected." +msgstr "As configurações não estão disponíveis porque a impressora está desligada." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 +msgctxt "@title:menu menubar:toplevel" +msgid "&View" +msgstr "&Visualizar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19 msgctxt "@action:inmenu menubar:view" -msgid "Front View" -msgstr "Vista Frente" +msgid "&Camera position" +msgstr "&Posição da câmara" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44 msgctxt "@action:inmenu menubar:view" -msgid "Top View" -msgstr "Vista Cima" +msgid "Camera view" +msgstr "Vista da câmara" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47 msgctxt "@action:inmenu menubar:view" -msgid "Left Side View" -msgstr "Vista Lado Esquerdo" +msgid "Perspective" +msgstr "Perspetiva" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" -msgid "Right Side View" -msgstr "Vista Lado Direito" +msgid "Orthographic" +msgstr "Ortográfica" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167 -msgctxt "@action:inmenu" -msgid "Configure Cura..." -msgstr "Configurar Cura..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80 +msgctxt "@action:inmenu menubar:view" +msgid "&Build plate" +msgstr "&Base de construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174 -msgctxt "@action:inmenu menubar:printer" -msgid "&Add Printer..." -msgstr "&Adicionar Impressora..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25 +msgctxt "@label:category menu label" +msgid "Network enabled printers" +msgstr "Impressoras em rede" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180 -msgctxt "@action:inmenu menubar:printer" -msgid "Manage Pr&inters..." -msgstr "Gerir Im&pressoras..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42 +msgctxt "@label:category menu label" +msgid "Local printers" +msgstr "Impressoras locais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13 msgctxt "@action:inmenu" -msgid "Manage Materials..." -msgstr "Gerir Materiais..." +msgid "Visible Settings" +msgstr "Definições Visíveis" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" -msgid "Add more materials from Marketplace" -msgstr "Use o Mercado para adicionar outros materiais" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202 -msgctxt "@action:inmenu menubar:profile" -msgid "&Update profile with current settings/overrides" -msgstr "&Atualizar perfil com as definições/substituições atuais" +msgid "Collapse All Categories" +msgstr "Fechar todas as categorias" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210 -msgctxt "@action:inmenu menubar:profile" -msgid "&Discard current changes" -msgstr "&Descartar alterações atuais" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 +msgctxt "@action:inmenu" +msgid "Manage Setting Visibility..." +msgstr "Gerir Visibilidade das Definições..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222 -msgctxt "@action:inmenu menubar:profile" -msgid "&Create profile from current settings/overrides..." -msgstr "&Criar perfil a partir das definições/substituições atuais..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 +msgctxt "@title:menu menubar:toplevel" +msgid "&Settings" +msgstr "&Definições" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228 -msgctxt "@action:inmenu menubar:profile" -msgid "Manage Profiles..." -msgstr "Gerir Perfis..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15 +msgctxt "@title:menu menubar:settings" +msgid "&Printer" +msgstr "&Impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236 -msgctxt "@action:inmenu menubar:help" -msgid "Show Online &Documentation" -msgstr "Mostrar &documentação online" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29 +msgctxt "@title:menu" +msgid "&Material" +msgstr "&Material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244 -msgctxt "@action:inmenu menubar:help" -msgid "Report a &Bug" -msgstr "Reportar um &erro" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44 +msgctxt "@action:inmenu" +msgid "Set as Active Extruder" +msgstr "Definir como Extrusor Ativo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252 -msgctxt "@action:inmenu menubar:help" -msgid "What's New" -msgstr "Novidades" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50 +msgctxt "@action:inmenu" +msgid "Enable Extruder" +msgstr "Ativar Extrusor" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258 -msgctxt "@action:inmenu menubar:help" -msgid "About..." -msgstr "Sobre..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57 +msgctxt "@action:inmenu" +msgid "Disable Extruder" +msgstr "Desativar Extrusor" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265 -msgctxt "@action:inmenu menubar:edit" -msgid "Delete Selected Model" -msgid_plural "Delete Selected Models" -msgstr[0] "Apagar Modelo Selecionado" -msgstr[1] "Apagar Modelos Selecionados" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Save Project..." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275 -msgctxt "@action:inmenu menubar:edit" -msgid "Center Selected Model" -msgid_plural "Center Selected Models" -msgstr[0] "Centrar modelo selecionado" -msgstr[1] "Centrar modelos selecionados" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27 +msgctxt "@label" +msgid "Print Selected Model With:" +msgid_plural "Print Selected Models With:" +msgstr[0] "Imprimir Modelo Selecionado Com:" +msgstr[1] "Imprimir modelos selecionados com:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284 -msgctxt "@action:inmenu menubar:edit" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116 +msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" -msgstr[0] "Multiplicar modelo selecionado" +msgstr[0] "Multiplicar Modelo Selecionado" msgstr[1] "Multiplicar modelos selecionados" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293 -msgctxt "@action:inmenu" -msgid "Delete Model" -msgstr "Apagar Modelo" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141 +msgctxt "@label" +msgid "Number of Copies" +msgstr "Número de Cópias" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301 -msgctxt "@action:inmenu" -msgid "Ce&nter Model on Platform" -msgstr "Ce&ntrar Modelo na Base" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 +msgctxt "@title:menu menubar:file" +msgid "Open File(s)..." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307 -msgctxt "@action:inmenu menubar:edit" -msgid "&Group Models" -msgstr "&Agrupar Modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146 +msgctxt "@label:header" +msgid "Custom profiles" +msgstr "Perfis personalizados" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327 -msgctxt "@action:inmenu menubar:edit" -msgid "Ungroup Models" -msgstr "Desagrupar Modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564 +msgctxt "@action:button" +msgid "Discard current changes" +msgstr "Descartar alterações atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337 -msgctxt "@action:inmenu menubar:edit" -msgid "&Merge Models" -msgstr "&Combinar Modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47 +msgctxt "@label" +msgid "Profile" +msgstr "Perfil" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347 -msgctxt "@action:inmenu" -msgid "&Multiply Model..." -msgstr "&Multiplicar Modelo..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170 +msgctxt "@tooltip" +msgid "" +"Some setting/override values are different from the values stored in the profile.\n" +"\n" +"Click to open the profile manager." +msgstr "" +"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n" +"\n" +"Clique para abrir o gestor de perfis." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354 -msgctxt "@action:inmenu menubar:edit" -msgid "Select All Models" -msgstr "Selecionar todos os modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 +msgctxt "@label:Should be short" +msgid "On" +msgstr "Ligado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364 -msgctxt "@action:inmenu menubar:edit" -msgid "Clear Build Plate" -msgstr "Limpar base de construção" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 +msgctxt "@label:Should be short" +msgid "Off" +msgstr "Desligado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374 -msgctxt "@action:inmenu menubar:file" -msgid "Reload All Models" -msgstr "Recarregar todos os modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33 +msgctxt "@label" +msgid "Experimental" +msgstr "Experimental" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383 -msgctxt "@action:inmenu menubar:edit" -msgid "Arrange All Models To All Build Plates" -msgstr "Dispor todos os modelos em todas as bases de construção" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 +msgctxt "@button" +msgid "Recommended" +msgstr "Recomendado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390 -msgctxt "@action:inmenu menubar:edit" -msgid "Arrange All Models" -msgstr "Dispor todos os modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 +msgctxt "@button" +msgid "Custom" +msgstr "Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398 -msgctxt "@action:inmenu menubar:edit" -msgid "Arrange Selection" -msgstr "Dispor seleção" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 +msgctxt "@label" +msgid "Print settings" +msgstr "Definições de impressão" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405 -msgctxt "@action:inmenu menubar:edit" -msgid "Reset All Model Positions" -msgstr "Repor todas as posições de modelos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 +msgctxt "@label shown when we load a Gcode file" +msgid "Print setup disabled. G-code file can not be modified." +msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado." -# rever! -# Cancelar todas? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412 -msgctxt "@action:inmenu menubar:edit" -msgid "Reset All Model Transformations" -msgstr "Repor Todas as Transformações do Modelo" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193 +msgctxt "@label" +msgid "Gradual infill" +msgstr "Enchimento gradual" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419 -msgctxt "@action:inmenu menubar:file" -msgid "&Open File(s)..." -msgstr "&Abrir Ficheiro(s)..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232 +msgctxt "@label" +msgid "Gradual infill will gradually increase the amount of infill towards the top." +msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427 -msgctxt "@action:inmenu menubar:file" -msgid "&New Project..." -msgstr "&Novo Projeto..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728 +msgctxt "@label" +msgid "Profiles" +msgstr "Perfis" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434 -msgctxt "@action:inmenu menubar:help" -msgid "Show Configuration Folder" -msgstr "Mostrar pasta de configuração" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81 +msgctxt "@tooltip" +msgid "You have modified some profile settings. If you want to change these go to custom mode." +msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538 -msgctxt "@action:menu" -msgid "Configure setting visibility..." -msgstr "Configurar visibilidade das definições..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30 +msgctxt "@label" +msgid "Support" +msgstr "Suportes" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448 -msgctxt "@action:menu" -msgid "&Marketplace" -msgstr "&Mercado" +# rever! +# collapse ? +# desmoronar? desabar? +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71 +msgctxt "@label" +msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." +msgstr "Criar estruturas para suportar partes do modelo, suspensas ou com saliências. Sem estas estruturas, essas partes do modelo podem desmoronar durante a impressão." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29 msgctxt "@label" -msgid "This package will be installed after restarting." -msgstr "Este pacote será instalado após reiniciar." +msgid "Adhesion" +msgstr "Aderência à Base de Construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15 -msgctxt "@title:tab" -msgid "General" -msgstr "Geral" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74 +msgctxt "@label" +msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." +msgstr "Permite a impressão de uma aba ou raft. Isto irá adicionar, respetivamente, uma área plana em torno ou sob a base do seu objeto, que são fáceis de retirar posteriormente." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462 -msgctxt "@title:tab" -msgid "Settings" -msgstr "Definições" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 +msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" +msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" +msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" +msgstr[0] "Não existe um perfil %1 para a configuração do extrusor %2. O objetivo predefinido será usado como alternativa" +msgstr[1] "Não existe um perfil %1 para as configurações dos extrusores %2. O objetivo predefinido será usado como alternativa" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 -msgctxt "@title:tab" -msgid "Printers" -msgstr "Impressoras" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24 +msgctxt "@label" +msgid "No items to select from" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 -msgctxt "@title:tab" -msgid "Profiles" -msgstr "Perfis" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140 +msgctxt "@label" +msgid "Active print" +msgstr "Impressão ativa" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587 -msgctxt "@title:window %1 is the application name" -msgid "Closing %1" -msgstr "A fechar %1" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148 +msgctxt "@label" +msgid "Job Name" +msgstr "Nome do trabalho" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600 -msgctxt "@label %1 is the application name" -msgid "Are you sure you want to exit %1?" -msgstr "Tem a certeza de que pretende sair de %1?" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156 +msgctxt "@label" +msgid "Printing Time" +msgstr "Tempo de Impressão" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164 +msgctxt "@label" +msgid "Estimated time left" +msgstr "Tempo restante estimado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15 msgctxt "@title:window" -msgid "Open file(s)" -msgstr "Abrir ficheiro(s)" +msgid "Discard or Keep changes" +msgstr "Descartar ou Manter as alterações" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744 -msgctxt "@window:title" -msgid "Install Package" -msgstr "Instalar Pacote" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57 +msgctxt "@text:window, %1 is a profile name" +msgid "" +"You have customized some profile settings.\n" +"Would you like to Keep these changed settings after switching profiles?\n" +"Alternatively, you can discard the changes to load the defaults from '%1'." +msgstr "" +"Personalizou algumas definições de perfil.\n" +"Pretende manter estas definições alteradas depois de trocar de perfis?\n" +"Como alternativa, pode descartar as alterações para carregar as predefinições a partir de '%1'." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752 -msgctxt "@title:window" -msgid "Open File(s)" -msgstr "Abrir ficheiro(s)" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111 +msgctxt "@title:column" +msgid "Profile settings" +msgstr "Definições do perfil" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755 -msgctxt "@text:window" -msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." -msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 +msgctxt "@title:column" +msgid "Current changes" +msgstr "Alterações atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858 -msgctxt "@title:window" -msgid "Add Printer" -msgstr "Adicionar Impressora" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747 +msgctxt "@option:discardOrKeep" +msgid "Always ask me this" +msgstr "Perguntar sempre isto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866 -msgctxt "@title:window" -msgid "What's New" -msgstr "Novidades" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159 +msgctxt "@option:discardOrKeep" +msgid "Discard and never ask again" +msgstr "Descartar e não perguntar novamente" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 +msgctxt "@option:discardOrKeep" +msgid "Keep and never ask again" +msgstr "Manter e não perguntar novamente" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197 +msgctxt "@action:button" +msgid "Discard changes" +msgstr "Descartar alterações" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210 +msgctxt "@action:button" +msgid "Keep changes" +msgstr "Manter alterações" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "Acerca de %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "versão: %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "A Solução completa para a impressão 3D por filamento fundido." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" @@ -3625,1263 +3631,1613 @@ msgstr "" "O Cura foi desenvolvido pela Ultimaker B.V. em colaboração com a comunidade.\n" "O Cura tem o prazer de utilizar os seguintes projetos open source:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135 msgctxt "@label" msgid "Graphical user interface" msgstr "Interface gráfica do utilizador" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "Application framework" msgstr "Framework da aplicação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "G-code generator" msgstr "Gerador de G-code" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label" msgid "Interprocess communication library" msgstr "Biblioteca de comunicação interprocessual" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "Programming language" msgstr "Linguagem de programação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "GUI framework" msgstr "GUI framework" # rever! # use eng programing terms? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "GUI framework bindings" msgstr "Ligações de estrutura da GUI" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "C/C++ Binding library" msgstr "Biblioteca de ligações C/C++" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label" msgid "Data interchange format" msgstr "Formato de intercâmbio de dados" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label" msgid "Support library for scientific computing" msgstr "Biblioteca de apoio para computação científica" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Support library for faster math" msgstr "Biblioteca de apoio para cálculos mais rápidos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "Support library for handling STL files" msgstr "Biblioteca de apoio para processamento de ficheiros STL" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "Support library for handling planar objects" msgstr "Biblioteca de apoio para processamento de objetos planos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "Biblioteca de apoio para processamento de malhas triangulares" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "Biblioteca de apoio para processamento de ficheiros 3MF" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "Biblioteca de apoio para transmissões de fluxo e metadados de ficheiros" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label" msgid "Serial communication library" msgstr "Biblioteca de comunicação em série" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "Biblioteca de deteção ZeroConf" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@label" msgid "Polygon clipping library" msgstr "Biblioteca de recortes de polígonos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155 msgctxt "@Label" msgid "Static type checker for Python" msgstr "Verificador de tipo estático para Python" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "Certificados de raiz para validar a credibilidade SSL" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@Label" msgid "Python Error tracking library" msgstr "Biblioteca de controlo de erros de Python" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "Biblioteca de embalagens de polígonos, desenvolvida pela Prusa Research" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "Ligações Python para libnest2d" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161 +msgctxt "@label" +msgid "Support library for system keyring access" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162 +msgctxt "@label" +msgid "Python extensions for Microsoft Windows" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "Font" msgstr "Tipo de letra" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "SVG icons" msgstr "Ícones SVG" # rever! -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "Implementação da aplicação de distribuição cruzada Linux" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20 -msgctxt "@title:window" -msgid "Open project file" -msgstr "Abrir ficheiro de projeto" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93 -msgctxt "@text:window" -msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" -msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103 -msgctxt "@text:window" -msgid "Remember my choice" -msgstr "Memorizar a minha escolha" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122 -msgctxt "@action:button" -msgid "Open as project" -msgstr "Abrir como projeto" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131 -msgctxt "@action:button" -msgid "Import models" -msgstr "Importar modelos" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627 msgctxt "@title:window" -msgid "Discard or Keep changes" -msgstr "Descartar ou Manter as alterações" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57 -msgctxt "@text:window, %1 is a profile name" -msgid "" -"You have customized some profile settings.\n" -"Would you like to Keep these changed settings after switching profiles?\n" -"Alternatively, you can discard the changes to load the defaults from '%1'." -msgstr "Personalizou algumas definições de perfil.\nPretende manter estas definições alteradas depois de trocar de perfis?\nComo alternativa, pode descartar as" -" alterações para carregar as predefinições a partir de '%1'." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111 -msgctxt "@title:column" -msgid "Profile settings" -msgstr "Definições do perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 -msgctxt "@title:column" -msgid "Current changes" -msgstr "Alterações atuais" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747 -msgctxt "@option:discardOrKeep" -msgid "Always ask me this" -msgstr "Perguntar sempre isto" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159 -msgctxt "@option:discardOrKeep" -msgid "Discard and never ask again" -msgstr "Descartar e não perguntar novamente" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 -msgctxt "@option:discardOrKeep" -msgid "Keep and never ask again" -msgstr "Manter e não perguntar novamente" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197 -msgctxt "@action:button" -msgid "Discard changes" -msgstr "Descartar alterações" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210 -msgctxt "@action:button" -msgid "Keep changes" -msgstr "Manter alterações" +msgid "Open file(s)" +msgstr "Abrir ficheiro(s)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Encontrámos um ou mais projetos do Cura nos ficheiros selecionados. Só é possível abrir um Projeto do Cura, de cada vez. Sugerimos importar apenas os modelos 3D desses Projetos do Cura. Deseja continuar?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94 msgctxt "@action:button" msgid "Import all as models" msgstr "Importar tudo como modelos 3D" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15 msgctxt "@title:window" msgid "Save Project" msgstr "Guardar projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extrusor %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 & material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 msgctxt "@action:label" msgid "Material" msgstr "Material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Não mostrar novamente o resumo do projeto ao guardar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300 msgctxt "@action:button" msgid "Save" msgstr "Guardar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16 -msgctxt "@label %1 is filled in with the name of an extruder" -msgid "Print Selected Model with %1" -msgid_plural "Print Selected Models with %1" -msgstr[0] "Imprimir Modelo Selecionado com o %1" -msgstr[1] "Imprimir Modelos Selecionados com o %1" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20 +msgctxt "@title:window" +msgid "Open project file" +msgstr "Abrir ficheiro de projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88 +msgctxt "@text:window" +msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" +msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98 +msgctxt "@text:window" +msgid "Remember my choice" +msgstr "Memorizar a minha escolha" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117 +msgctxt "@action:button" +msgid "Open as project" +msgstr "Abrir como projeto" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126 +msgctxt "@action:button" +msgid "Import models" +msgstr "Importar modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99 msgctxt "@text Print job name" msgid "Untitled" msgstr "Sem título" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "&File" -msgstr "&Ficheiro" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 +msgctxt "@label" +msgid "Welcome to Ultimaker Cura" +msgstr "Bem-vindo ao Ultimaker Cura" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31 -msgctxt "@title:menu menubar:toplevel" -msgid "&Edit" -msgstr "&Editar" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68 +msgctxt "@text" +msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 -msgctxt "@title:menu menubar:toplevel" -msgid "&View" -msgstr "&Visualizar" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86 +msgctxt "@button" +msgid "Get started" +msgstr "Iniciar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 -msgctxt "@title:menu menubar:toplevel" -msgid "&Settings" -msgstr "&Definições" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 +msgctxt "@label" +msgid "Empty" +msgstr "Vazio" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56 -msgctxt "@title:menu menubar:toplevel" -msgid "E&xtensions" -msgstr "E&xtensões" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 +msgctxt "@label" +msgid "Help us to improve Ultimaker Cura" +msgstr "Ajude-nos a melhorar o Ultimaker Cura" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94 -msgctxt "@title:menu menubar:toplevel" -msgid "P&references" -msgstr "P&referências" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 +msgctxt "@text" +msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" +msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102 -msgctxt "@title:menu menubar:toplevel" -msgid "&Help" -msgstr "&Ajuda" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 +msgctxt "@text" +msgid "Machine types" +msgstr "Tipos de máquina" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148 -msgctxt "@title:window" -msgid "New project" -msgstr "Novo projeto" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 +msgctxt "@text" +msgid "Material usage" +msgstr "Utilização do material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149 -msgctxt "@info:question" -msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." -msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 +msgctxt "@text" +msgid "Number of slices" +msgstr "Número de segmentos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90 -msgctxt "@action:button" -msgid "Marketplace" -msgstr "Mercado" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 +msgctxt "@text" +msgid "Print settings" +msgstr "Definições de impressão" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 -msgctxt "@header" -msgid "Configurations" -msgstr "Configurações" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 +msgctxt "@text" +msgid "Data collected by Ultimaker Cura will not contain any personal information." +msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 +msgctxt "@text" +msgid "More information" +msgstr "Mais informações" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" -msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." -msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto." +msgid "Add printer by IP address" +msgstr "Adicionar impressora por endereço IP" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 +msgctxt "@text" +msgid "Enter your printer's IP address." +msgstr "Introduza o endereço IP da sua impressora." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 +msgctxt "@button" +msgid "Add" +msgstr "Adicionar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 msgctxt "@label" -msgid "Marketplace" -msgstr "Mercado" +msgid "Could not connect to device." +msgstr "Não foi possível ligar ao dispositivo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" -msgid "Loading available configurations from the printer..." -msgstr "A carregar as configurações disponíveis da impressora..." +msgid "Can't connect to your Ultimaker printer?" +msgstr "Não se consegue ligar a uma impressora Ultimaker?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 msgctxt "@label" -msgid "The configurations are not available because the printer is disconnected." -msgstr "As configurações não estão disponíveis porque a impressora está desligada." +msgid "The printer at this address has not responded yet." +msgstr "A impressora neste endereço ainda não respondeu." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 msgctxt "@label" -msgid "Select configuration" -msgstr "Selecionar configuração" +msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." +msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 +msgctxt "@button" +msgid "Back" +msgstr "Anterior" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 +msgctxt "@button" +msgid "Connect" +msgstr "Ligar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" -msgid "Configurations" -msgstr "Configurações" +msgid "Add a printer" +msgstr "Adicionar uma impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25 -msgctxt "@header" -msgid "Custom" -msgstr "Personalizado" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 +msgctxt "@label" +msgid "Add a networked printer" +msgstr "Adicionar uma impressora em rede" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90 msgctxt "@label" -msgid "Printer" -msgstr "Impressora" +msgid "Add a non-networked printer" +msgstr "Adicionar uma impressora sem rede" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28 msgctxt "@label" -msgid "Enabled" -msgstr "Ativado" +msgid "What's New" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" -msgid "Material" -msgstr "Material" +msgid "Add a Cloud printer" +msgstr "Adicionar uma impressora de cloud" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 msgctxt "@label" -msgid "Use glue for better adhesion with this material combination." -msgstr "Utilizar cola para melhor aderência com esta combinação de materiais." +msgid "Waiting for Cloud response" +msgstr "A aguardar resposta da cloud" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 msgctxt "@label" -msgid "Print Selected Model With:" -msgid_plural "Print Selected Models With:" -msgstr[0] "Imprimir Modelo Selecionado Com:" -msgstr[1] "Imprimir modelos selecionados com:" +msgid "No printers found in your account?" +msgstr "Não foram encontradas impressoras na sua conta?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116 -msgctxt "@title:window" -msgid "Multiply Selected Model" -msgid_plural "Multiply Selected Models" -msgstr[0] "Multiplicar Modelo Selecionado" -msgstr[1] "Multiplicar modelos selecionados" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 +msgctxt "@label" +msgid "The following printers in your account have been added in Cura:" +msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204 +msgctxt "@button" +msgid "Add printer manually" +msgstr "Adicionar impressora manualmente" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20 msgctxt "@label" -msgid "Number of Copies" -msgstr "Número de Cópias" +msgid "Sign in to the Ultimaker platform" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33 -msgctxt "@title:menu menubar:file" -msgid "&Save Project..." -msgstr "&Guardar projeto..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124 +msgctxt "@text" +msgid "Add material settings and plugins from the Marketplace" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54 -msgctxt "@title:menu menubar:file" -msgid "&Export..." -msgstr "&Exportar..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154 +msgctxt "@text" +msgid "Backup and sync your material settings and plugins" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65 -msgctxt "@action:inmenu menubar:file" -msgid "Export Selection..." -msgstr "Exportar seleção..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184 +msgctxt "@text" +msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13 -msgctxt "@label:category menu label" -msgid "Material" -msgstr "Material" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217 +msgctxt "@text" +msgid "Create a free Ultimaker Account" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54 -msgctxt "@label:category menu label" -msgid "Favorites" -msgstr "Favoritos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230 +msgctxt "@button" +msgid "Skip" +msgstr "Ignorar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79 -msgctxt "@label:category menu label" -msgid "Generic" -msgstr "Genérico" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 +msgctxt "@label" +msgid "User Agreement" +msgstr "Contrato de utilizador" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25 -msgctxt "@label:category menu label" -msgid "Network enabled printers" -msgstr "Impressoras em rede" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70 +msgctxt "@button" +msgid "Decline and close" +msgstr "Rejeitar e fechar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42 -msgctxt "@label:category menu label" -msgid "Local printers" -msgstr "Impressoras locais" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 +msgctxt "@label" +msgid "Release Notes" +msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 -msgctxt "@title:menu menubar:file" -msgid "Open &Recent" -msgstr "Abrir &Recente" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 +msgctxt "@label" +msgid "There is no printer found over your network." +msgstr "Não foi encontrada nenhuma impressora na sua rede." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15 -msgctxt "@title:menu menubar:settings" -msgid "&Printer" -msgstr "&Impressora" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182 +msgctxt "@label" +msgid "Refresh" +msgstr "Atualizar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29 -msgctxt "@title:menu" -msgid "&Material" -msgstr "&Material" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193 +msgctxt "@label" +msgid "Add printer by IP" +msgstr "Adicionar impressora por IP" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44 -msgctxt "@action:inmenu" -msgid "Set as Active Extruder" -msgstr "Definir como Extrusor Ativo" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204 +msgctxt "@label" +msgid "Add cloud printer" +msgstr "Adicionar impressora de cloud" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50 -msgctxt "@action:inmenu" -msgid "Enable Extruder" -msgstr "Ativar Extrusor" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240 +msgctxt "@label" +msgid "Troubleshooting" +msgstr "Resolução de problemas" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57 -msgctxt "@action:inmenu" -msgid "Disable Extruder" -msgstr "Desativar Extrusor" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230 +msgctxt "@label" +msgid "Manufacturer" +msgstr "Fabricante" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247 +msgctxt "@label" +msgid "Profile author" +msgstr "Autor do perfil" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265 +msgctxt "@label" +msgid "Printer name" +msgstr "Nome da impressora" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274 +msgctxt "@text" +msgid "Please name your printer" +msgstr "Atribuir um nome à impressora" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81 +msgctxt "@label The argument is a timestamp" +msgid "Last update: %1" +msgstr "Atualização mais recente: %1" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109 +msgctxt "@button" +msgid "Ultimaker Account" +msgstr "Conta Ultimaker" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125 +msgctxt "@button" +msgid "Sign Out" +msgstr "Terminar sessão" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42 +msgctxt "@text" +msgid "" +"- Add material profiles and plug-ins from the Marketplace\n" +"- Back-up and sync your material profiles and plug-ins\n" +"- Share ideas and get help from 48,000+ users in the Ultimaker community" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62 +msgctxt "@button" +msgid "Create a free Ultimaker account" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24 +msgctxt "@action:button" +msgid "Sign in" +msgstr "Iniciar sessão" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28 +msgctxt "@label" +msgid "Checking..." +msgstr "A verificar..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35 +msgctxt "@label" +msgid "Account synced" +msgstr "Conta sincronizada" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42 +msgctxt "@label" +msgid "Something went wrong..." +msgstr "Ocorreu um problema..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96 +msgctxt "@button" +msgid "Install pending updates" +msgstr "Instalar atualizações pendentes" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118 +msgctxt "@button" +msgid "Check for account updates" +msgstr "Verificar atualizações de conta" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59 +msgctxt "@label" +msgid "Object list" +msgstr "Lista de objetos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82 msgctxt "@action:inmenu" -msgid "Visible Settings" -msgstr "Definições Visíveis" +msgid "Show Online Troubleshooting Guide" +msgstr "Mostrar Guia de resolução de problemas online" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89 msgctxt "@action:inmenu" -msgid "Collapse All Categories" -msgstr "Fechar todas as categorias" +msgid "Toggle Full Screen" +msgstr "Alternar para ecrã inteiro" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97 msgctxt "@action:inmenu" -msgid "Manage Setting Visibility..." -msgstr "Gerir Visibilidade das Definições..." +msgid "Exit Full Screen" +msgstr "Sair do Ecrã Inteiro" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104 +msgctxt "@action:inmenu menubar:edit" +msgid "&Undo" +msgstr "&Desfazer" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114 +msgctxt "@action:inmenu menubar:edit" +msgid "&Redo" +msgstr "&Refazer" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124 +msgctxt "@action:inmenu menubar:file" +msgid "&Quit" +msgstr "&Sair" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132 msgctxt "@action:inmenu menubar:view" -msgid "&Camera position" -msgstr "&Posição da câmara" +msgid "3D View" +msgstr "Vista 3D" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" -msgid "Camera view" -msgstr "Vista da câmara" +msgid "Front View" +msgstr "Vista Frente" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" -msgid "Perspective" -msgstr "Perspetiva" +msgid "Top View" +msgstr "Vista Cima" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" -msgid "Orthographic" -msgstr "Ortográfica" +msgid "Left Side View" +msgstr "Vista Lado Esquerdo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" -msgid "&Build plate" -msgstr "&Base de construção" +msgid "Right Side View" +msgstr "Vista Lado Direito" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119 -msgctxt "@label:MonitorStatus" -msgid "Not connected to a printer" -msgstr "Sem ligação a uma impressora" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167 +msgctxt "@action:inmenu" +msgid "Configure Cura..." +msgstr "Configurar Cura..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123 -msgctxt "@label:MonitorStatus" -msgid "Printer does not accept commands" -msgstr "A impressora não aceita comandos" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174 +msgctxt "@action:inmenu menubar:printer" +msgid "&Add Printer..." +msgstr "&Adicionar Impressora..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133 -msgctxt "@label:MonitorStatus" -msgid "In maintenance. Please check the printer" -msgstr "Em manutenção. Verifique a impressora" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180 +msgctxt "@action:inmenu menubar:printer" +msgid "Manage Pr&inters..." +msgstr "Gerir Im&pressoras..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144 -msgctxt "@label:MonitorStatus" -msgid "Lost connection with the printer" -msgstr "Perdeu-se a ligação com a impressora" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187 +msgctxt "@action:inmenu" +msgid "Manage Materials..." +msgstr "Gerir Materiais..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146 -msgctxt "@label:MonitorStatus" -msgid "Printing..." -msgstr "A imprimir..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195 +msgctxt "@action:inmenu" +msgid "Add more materials from Marketplace" +msgstr "Use o Mercado para adicionar outros materiais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149 -msgctxt "@label:MonitorStatus" -msgid "Paused" -msgstr "Em pausa" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202 +msgctxt "@action:inmenu menubar:profile" +msgid "&Update profile with current settings/overrides" +msgstr "&Atualizar perfil com as definições/substituições atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152 -msgctxt "@label:MonitorStatus" -msgid "Preparing..." -msgstr "A preparar..." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210 +msgctxt "@action:inmenu menubar:profile" +msgid "&Discard current changes" +msgstr "&Descartar alterações atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154 -msgctxt "@label:MonitorStatus" -msgid "Please remove the print" -msgstr "Remova a impressão" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222 +msgctxt "@action:inmenu menubar:profile" +msgid "&Create profile from current settings/overrides..." +msgstr "&Criar perfil a partir das definições/substituições atuais..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228 +msgctxt "@action:inmenu menubar:profile" +msgid "Manage Profiles..." +msgstr "Gerir Perfis..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236 +msgctxt "@action:inmenu menubar:help" +msgid "Show Online &Documentation" +msgstr "Mostrar &documentação online" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244 +msgctxt "@action:inmenu menubar:help" +msgid "Report a &Bug" +msgstr "Reportar um &erro" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252 +msgctxt "@action:inmenu menubar:help" +msgid "What's New" +msgstr "Novidades" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258 +msgctxt "@action:inmenu menubar:help" +msgid "About..." +msgstr "Sobre..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265 +msgctxt "@action:inmenu menubar:edit" +msgid "Delete Selected" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275 +msgctxt "@action:inmenu menubar:edit" +msgid "Center Selected" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284 +msgctxt "@action:inmenu menubar:edit" +msgid "Multiply Selected" +msgstr "" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293 +msgctxt "@action:inmenu" +msgid "Delete Model" +msgstr "Apagar Modelo" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301 +msgctxt "@action:inmenu" +msgid "Ce&nter Model on Platform" +msgstr "Ce&ntrar Modelo na Base" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307 +msgctxt "@action:inmenu menubar:edit" +msgid "&Group Models" +msgstr "&Agrupar Modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327 +msgctxt "@action:inmenu menubar:edit" +msgid "Ungroup Models" +msgstr "Desagrupar Modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337 +msgctxt "@action:inmenu menubar:edit" +msgid "&Merge Models" +msgstr "&Combinar Modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347 +msgctxt "@action:inmenu" +msgid "&Multiply Model..." +msgstr "&Multiplicar Modelo..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354 +msgctxt "@action:inmenu menubar:edit" +msgid "Select All Models" +msgstr "Selecionar todos os modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364 +msgctxt "@action:inmenu menubar:edit" +msgid "Clear Build Plate" +msgstr "Limpar base de construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374 +msgctxt "@action:inmenu menubar:file" +msgid "Reload All Models" +msgstr "Recarregar todos os modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383 +msgctxt "@action:inmenu menubar:edit" +msgid "Arrange All Models To All Build Plates" +msgstr "Dispor todos os modelos em todas as bases de construção" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390 +msgctxt "@action:inmenu menubar:edit" +msgid "Arrange All Models" +msgstr "Dispor todos os modelos" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398 +msgctxt "@action:inmenu menubar:edit" +msgid "Arrange Selection" +msgstr "Dispor seleção" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405 +msgctxt "@action:inmenu menubar:edit" +msgid "Reset All Model Positions" +msgstr "Repor todas as posições de modelos" + +# rever! +# Cancelar todas? +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412 +msgctxt "@action:inmenu menubar:edit" +msgid "Reset All Model Transformations" +msgstr "Repor Todas as Transformações do Modelo" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421 +msgctxt "@action:inmenu menubar:file" +msgid "&Open File(s)..." +msgstr "&Abrir Ficheiro(s)..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431 +msgctxt "@action:inmenu menubar:file" +msgid "&New Project..." +msgstr "&Novo Projeto..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438 +msgctxt "@action:inmenu menubar:help" +msgid "Show Configuration Folder" +msgstr "Mostrar pasta de configuração" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538 +msgctxt "@action:menu" +msgid "Configure setting visibility..." +msgstr "Configurar visibilidade das definições..." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452 +msgctxt "@action:menu" +msgid "&Marketplace" +msgstr "&Mercado" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61 +msgctxt "@info:status" +msgid "Calculated" +msgstr "Calculado" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75 +msgctxt "@title:column" +msgid "Setting" +msgstr "Definição" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82 +msgctxt "@title:column" +msgid "Profile" +msgstr "Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89 +msgctxt "@title:column" +msgid "Current" +msgstr "Atual" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97 +msgctxt "@title:column" +msgid "Unit" +msgstr "Unidade" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72 +msgctxt "@title" +msgid "Information" +msgstr "Informações" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101 +msgctxt "@title:window" +msgid "Confirm Diameter Change" +msgstr "Confirmar Alteração de Diâmetro" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102 +msgctxt "@label (%1 is a number)" +msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" +msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128 msgctxt "@label" -msgid "Abort Print" -msgstr "Cancelar impressão" +msgid "Display Name" +msgstr "Nome" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148 msgctxt "@label" -msgid "Are you sure you want to abort the print?" -msgstr "Tem a certeza de que deseja cancelar a impressão?" +msgid "Material Type" +msgstr "Tipo de Material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158 msgctxt "@label" -msgid "Is printed as support." -msgstr "É imprimido como suporte." +msgid "Color" +msgstr "Cor" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208 msgctxt "@label" -msgid "Other models overlapping with this model are modified." -msgstr "Foram modificados outros modelos sobrepostos com este modelo." +msgid "Properties" +msgstr "Propriedades" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" -msgid "Infill overlapping with this model is modified." -msgstr "Foi modificada a sobreposição de enchimento com este modelo." +msgid "Density" +msgstr "Densidade" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225 msgctxt "@label" -msgid "Overlaps with this model are not supported." -msgstr "Não são suportadas sobreposições com este modelo." +msgid "Diameter" +msgstr "Diâmetro" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130 -msgctxt "@label %1 is the number of settings it overrides." -msgid "Overrides %1 setting." -msgid_plural "Overrides %1 settings." -msgstr[0] "Substitui %1 definição." -msgstr[1] "Substitui %1 definições." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259 +msgctxt "@label" +msgid "Filament Cost" +msgstr "Custo do Filamento" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276 msgctxt "@label" -msgid "Object list" -msgstr "Lista de objetos" +msgid "Filament weight" +msgstr "Peso do Filamento" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294 +msgctxt "@label" +msgid "Filament length" +msgstr "Comprimento do filamento" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303 +msgctxt "@label" +msgid "Cost per Meter" +msgstr "Custo por Metro" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317 +msgctxt "@label" +msgid "This material is linked to %1 and shares some of its properties." +msgstr "Este material está associado a %1 e partilha algumas das suas propriedades." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324 +msgctxt "@label" +msgid "Unlink Material" +msgstr "Desassociar Material" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335 +msgctxt "@label" +msgid "Description" +msgstr "Descrição" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348 +msgctxt "@label" +msgid "Adhesion Information" +msgstr "Informações de Aderência" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84 +msgctxt "@action:button" +msgid "Activate" +msgstr "Ativar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126 +msgctxt "@action:button" +msgid "Create" +msgstr "Criar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141 +msgctxt "@action:button" +msgid "Duplicate" +msgstr "Duplicar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167 +msgctxt "@action:button" +msgid "Import" +msgstr "Importar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179 +msgctxt "@action:button" +msgid "Export" +msgstr "Exportar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234 +msgctxt "@action:label" +msgid "Printer" +msgstr "Impressora" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277 +msgctxt "@title:window" +msgid "Confirm Remove" +msgstr "Confirmar Remoção" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278 +msgctxt "@label (%1 is object name)" +msgid "Are you sure you wish to remove %1? This cannot be undone!" +msgstr "Tem a certeza de que deseja remover o perfil %1? Não é possível desfazer esta ação!" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323 +msgctxt "@title:window" +msgid "Import Material" +msgstr "Importar material" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324 +msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" +msgid "Could not import material <filename>%1</filename>: <message>%2</message>" +msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328 +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Successfully imported material <filename>%1</filename>" +msgstr "Material <filename>%1</filename> importado com êxito" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354 +msgctxt "@title:window" +msgid "Export Material" +msgstr "Exportar Material" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358 +msgctxt "@info:status Don't translate the XML tags <filename> and <message>!" +msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>" +msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364 +msgctxt "@info:status Don't translate the XML tag <filename>!" +msgid "Successfully exported material to <filename>%1</filename>" +msgstr "Material exportado com êxito para <filename>%1</filename>" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455 +msgctxt "@title:tab" +msgid "Printers" +msgstr "Impressoras" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152 +msgctxt "@action:button" +msgid "Rename" +msgstr "Mudar Nome" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459 +msgctxt "@title:tab" +msgid "Profiles" +msgstr "Perfis" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104 +msgctxt "@label" +msgid "Create" +msgstr "Criar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121 +msgctxt "@label" +msgid "Duplicate" +msgstr "Duplicar" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202 +msgctxt "@title:window" +msgid "Create Profile" +msgstr "Criar Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204 +msgctxt "@info" +msgid "Please provide a name for this profile." +msgstr "Forneça um nome para este perfil." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263 +msgctxt "@title:window" +msgid "Duplicate Profile" +msgstr "Duplicar Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294 +msgctxt "@title:window" +msgid "Rename Profile" +msgstr "Mudar Nome do Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307 +msgctxt "@title:window" +msgid "Import Profile" +msgstr "Importar Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336 +msgctxt "@title:window" +msgid "Export Profile" +msgstr "Exportar Perfil" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399 +msgctxt "@label %1 is printer name" +msgid "Printer: %1" +msgstr "Impressora: %1" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557 +msgctxt "@action:button" +msgid "Update profile with current settings/overrides" +msgstr "Atualizar perfil com as definições/substituições atuais" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583 +msgctxt "@action:label" +msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." +msgstr "Este perfil utiliza as predefinições especificadas pela impressora, pelo que não tem quaisquer definições/substituições na lista seguinte." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591 +msgctxt "@action:label" +msgid "Your current settings match the selected profile." +msgstr "As suas definições atuais correspondem ao perfil selecionado." + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609 +msgctxt "@title:tab" +msgid "Global Settings" +msgstr "Definições Globais" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14 +msgctxt "@title:tab" +msgid "Setting Visibility" +msgstr "Visibilidade das Definições" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46 +msgctxt "@label:textbox" +msgid "Check all" +msgstr "Selecionar tudo" + +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450 +msgctxt "@title:tab" +msgid "General" +msgstr "Geral" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137 msgctxt "@label" msgid "Interface" msgstr "Interface" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216 msgctxt "@label" msgid "Currency:" msgstr "Moeda:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229 msgctxt "@label" msgid "Theme:" msgstr "Tema:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285 msgctxt "@label" msgid "You will need to restart the application for these changes to have effect." msgstr "É necessário reiniciar a aplicação para que estas alterações sejam aplicadas." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Seccionar automaticamente ao alterar as definições." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310 msgctxt "@option:check" msgid "Slice automatically" msgstr "Seccionar automaticamente" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324 msgctxt "@label" msgid "Viewport behavior" msgstr "Comportamento da janela" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Realçar, a vermelho, as áreas do modelo sem apoio. Sem suporte, estas áreas podem não ser impressas correctamente." # rever! # consolas? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341 msgctxt "@option:check" msgid "Display overhang" msgstr "Mostrar Saliências (Overhangs)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "Destaque as superfícies extra ou em falta do modelo utilizando sinais de aviso. As trajetórias de ferramentas irão falhar muitas vezes partes da geometria pretendida." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360 msgctxt "@option:check" msgid "Display model errors" msgstr "Apresentar erros de modelo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Move a câmara de forma que o modelo fique no centro da visualização quando é selecionado um modelo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Centrar câmara ao selecionar item" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "O comportamento de zoom predefinido do Cura deve ser invertido?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Inverta a direção do zoom da câmera." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "O zoom deve deslocar-se na direção do rato?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Fazer zoom em direção ao rato não é suportado na perspetiva ortográfica." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Fazer Zoom na direção do rato" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Os modelos, na plataforma, devem ser movidos para que não se intersectem?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Garantir que os modelos não se interceptam" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Pousar os modelos na base de construção?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Pousar automaticamente os modelos na base de construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Mostrar mensagem de aviso no leitor de g-code." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Mensagem de aviso no leitor de g-code" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "A vista por camada deve ser forçada a utilizar o modo de compatibilidade?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Forçar o modo de compatibilidade na visualização por camada (é necessário reiniciar)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "O Cura deve abrir na localização onde foi fechado?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Restore window position on start" msgstr "Restaurar posição da janela ao iniciar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Que tipo de composição de câmara deve ser utilizado?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520 msgctxt "@window:text" msgid "Camera rendering:" msgstr "Composição de câmara:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531 msgid "Perspective" msgstr "Perspetiva" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532 msgid "Orthographic" msgstr "Ortográfica" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563 msgctxt "@label" msgid "Opening and saving files" msgstr "Abrir e guardar ficheiros" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "Pretende que os ficheiros abertos a partir do ambiente de trabalho ou de aplicações externas sejam executados na mesma instância do Cura?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "Utilizar uma única instância do Cura" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Os modelos devem ser redimensionados até ao volume de construção se forem demasiado grandes?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590 msgctxt "@option:check" msgid "Scale large models" msgstr "Redimensionar modelos demasiado grandes" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Um modelo pode parecer extremamente pequeno se, por exemplo, este tiver sido criado em metros e não em milímetros. Estes modelos devem ser redimensionados?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Redimensionar modelos extremamente pequenos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Selecionar os modelos depois de abertos?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Selecionar os modelos depois de abertos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Deve um prefixo com base no nome da impressora ser adicionado ao nome do trabalho de impressão automaticamente?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Adicionar prefixo da máquina ao nome do trabalho" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Deve ser apresentado um resumo ao guardar um ficheiro de projeto?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Mostrar caixa de diálogo de resumo ao guardar projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Comportamento predefinido ao abrir um ficheiro de projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Comportamento predefinido ao abrir um ficheiro de projeto: " -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Perguntar sempre isto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Abrir sempre como projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683 msgctxt "@option:openProject" msgid "Always import models" msgstr "Importar sempre modelos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Quando tiver realizado alterações a um perfil e mudado para outro, será apresentada uma caixa de diálogo a perguntar se pretende manter as alterações. Caso contrário, pode escolher um comportamento predefinido, sendo que a caixa de diálogo nunca mais é apresentada." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 -msgctxt "@label" -msgid "Profiles" -msgstr "Perfis" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Comportamento predefinido para valores de definição alterados ao mudar para um perfil diferente: " -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Descartar sempre definições alteradas" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Transferir sempre definições alteradas para o novo perfil" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783 msgctxt "@label" msgid "Privacy" msgstr "Privacidade" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "O Cura deve procurar atualizações quando o programa é iniciado?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Procurar atualizações ao iniciar" # rever! # legal wording -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Podem alguns dados anónimos sobre a impressão ser enviados para a Ultimaker? Não são enviadas, nem armazenadas, quaisquer informações pessoais, incluindo modelos, endereços IP ou outro tipo de identificação pessoal." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Enviar dados (anónimos) sobre a impressão" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819 msgctxt "@action:button" msgid "More information" msgstr "Mais informações" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 -msgctxt "@action:button" -msgid "Activate" -msgstr "Ativar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 -msgctxt "@action:button" -msgid "Rename" -msgstr "Mudar Nome" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126 -msgctxt "@action:button" -msgid "Create" -msgstr "Criar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141 -msgctxt "@action:button" -msgid "Duplicate" -msgstr "Duplicar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 -msgctxt "@action:button" -msgid "Import" -msgstr "Importar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 -msgctxt "@action:button" -msgid "Export" -msgstr "Exportar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234 -msgctxt "@action:label" -msgid "Printer" -msgstr "Impressora" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274 -msgctxt "@title:window" -msgid "Confirm Remove" -msgstr "Confirmar Remoção" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275 -msgctxt "@label (%1 is object name)" -msgid "Are you sure you wish to remove %1? This cannot be undone!" -msgstr "Tem a certeza de que deseja remover o perfil %1? Não é possível desfazer esta ação!" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323 -msgctxt "@title:window" -msgid "Import Material" -msgstr "Importar material" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324 -msgctxt "@info:status Don't translate the XML tags <filename> or <message>!" -msgid "Could not import material <filename>%1</filename>: <message>%2</message>" -msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50 +msgctxt "@label" +msgid "View type" +msgstr "Ver tipo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328 -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Successfully imported material <filename>%1</filename>" -msgstr "Material <filename>%1</filename> importado com êxito" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119 +msgctxt "@label:MonitorStatus" +msgid "Not connected to a printer" +msgstr "Sem ligação a uma impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354 -msgctxt "@title:window" -msgid "Export Material" -msgstr "Exportar Material" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123 +msgctxt "@label:MonitorStatus" +msgid "Printer does not accept commands" +msgstr "A impressora não aceita comandos" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358 -msgctxt "@info:status Don't translate the XML tags <filename> and <message>!" -msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>" -msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133 +msgctxt "@label:MonitorStatus" +msgid "In maintenance. Please check the printer" +msgstr "Em manutenção. Verifique a impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364 -msgctxt "@info:status Don't translate the XML tag <filename>!" -msgid "Successfully exported material to <filename>%1</filename>" -msgstr "Material exportado com êxito para <filename>%1</filename>" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144 +msgctxt "@label:MonitorStatus" +msgid "Lost connection with the printer" +msgstr "Perdeu-se a ligação com a impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72 -msgctxt "@title" -msgid "Information" -msgstr "Informações" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146 +msgctxt "@label:MonitorStatus" +msgid "Printing..." +msgstr "A imprimir..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101 -msgctxt "@title:window" -msgid "Confirm Diameter Change" -msgstr "Confirmar Alteração de Diâmetro" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149 +msgctxt "@label:MonitorStatus" +msgid "Paused" +msgstr "Em pausa" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102 -msgctxt "@label (%1 is a number)" -msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" -msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152 +msgctxt "@label:MonitorStatus" +msgid "Preparing..." +msgstr "A preparar..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128 -msgctxt "@label" -msgid "Display Name" -msgstr "Nome" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154 +msgctxt "@label:MonitorStatus" +msgid "Please remove the print" +msgstr "Remova a impressão" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326 msgctxt "@label" -msgid "Material Type" -msgstr "Tipo de Material" +msgid "Abort Print" +msgstr "Cancelar impressão" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338 msgctxt "@label" -msgid "Color" -msgstr "Cor" +msgid "Are you sure you want to abort the print?" +msgstr "Tem a certeza de que deseja cancelar a impressão?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208 -msgctxt "@label" -msgid "Properties" -msgstr "Propriedades" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68 +msgctxt "@label:textbox" +msgid "Search settings" +msgstr "Procurar definições" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 -msgctxt "@label" -msgid "Density" -msgstr "Densidade" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456 +msgctxt "@action:menu" +msgid "Copy value to all extruders" +msgstr "Copiar valor para todos os extrusores" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225 -msgctxt "@label" -msgid "Diameter" -msgstr "Diâmetro" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465 +msgctxt "@action:menu" +msgid "Copy all changed values to all extruders" +msgstr "Copiar todos os valores alterados para todos os extrusores" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259 -msgctxt "@label" -msgid "Filament Cost" -msgstr "Custo do Filamento" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502 +msgctxt "@action:menu" +msgid "Hide this setting" +msgstr "Esconder esta definição" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276 -msgctxt "@label" -msgid "Filament weight" -msgstr "Peso do Filamento" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515 +msgctxt "@action:menu" +msgid "Don't show this setting" +msgstr "Não mostrar esta definição" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294 -msgctxt "@label" -msgid "Filament length" -msgstr "Comprimento do filamento" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519 +msgctxt "@action:menu" +msgid "Keep this setting visible" +msgstr "Manter esta definição visível" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303 +# rever! +# ocultas? +# escondidas? +# valor normal? automatico? +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200 msgctxt "@label" -msgid "Cost per Meter" -msgstr "Custo por Metro" +msgid "" +"Some hidden settings use values different from their normal calculated value.\n" +"\n" +"Click to make these settings visible." +msgstr "" +"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n" +"\n" +"Clique para tornar estas definições visíveis." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81 msgctxt "@label" -msgid "This material is linked to %1 and shares some of its properties." -msgstr "Este material está associado a %1 e partilha algumas das suas propriedades." +msgid "This setting is not used because all the settings that it influences are overridden." +msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324 -msgctxt "@label" -msgid "Unlink Material" -msgstr "Desassociar Material" +# rever! +# Afeta? +# Influencia? +# Altera? +# Modifica? +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86 +msgctxt "@label Header for list of settings." +msgid "Affects" +msgstr "Modifica" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335 -msgctxt "@label" -msgid "Description" -msgstr "Descrição" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91 +msgctxt "@label Header for list of settings." +msgid "Affected By" +msgstr "Modificado Por" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187 msgctxt "@label" -msgid "Adhesion Information" -msgstr "Informações de Aderência" +msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." +msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191 msgctxt "@label" -msgid "Print settings" -msgstr "Definições de impressão" +msgid "This setting is resolved from conflicting extruder-specific values:" +msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230 msgctxt "@label" -msgid "Create" -msgstr "Criar" +msgid "" +"This setting has a value that is different from the profile.\n" +"\n" +"Click to restore the value of the profile." +msgstr "" +"Esta definição tem um valor que é diferente do perfil.\n" +"\n" +"Clique para restaurar o valor do perfil." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329 msgctxt "@label" -msgid "Duplicate" -msgstr "Duplicar" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202 -msgctxt "@title:window" -msgid "Create Profile" -msgstr "Criar Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204 -msgctxt "@info" -msgid "Please provide a name for this profile." -msgstr "Forneça um nome para este perfil." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260 -msgctxt "@title:window" -msgid "Duplicate Profile" -msgstr "Duplicar Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291 -msgctxt "@title:window" -msgid "Rename Profile" -msgstr "Mudar Nome do Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304 -msgctxt "@title:window" -msgid "Import Profile" -msgstr "Importar Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333 -msgctxt "@title:window" -msgid "Export Profile" -msgstr "Exportar Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396 -msgctxt "@label %1 is printer name" -msgid "Printer: %1" -msgstr "Impressora: %1" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554 -msgctxt "@action:button" -msgid "Update profile with current settings/overrides" -msgstr "Atualizar perfil com as definições/substituições atuais" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 -msgctxt "@action:button" -msgid "Discard current changes" -msgstr "Descartar alterações atuais" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580 -msgctxt "@action:label" -msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." -msgstr "Este perfil utiliza as predefinições especificadas pela impressora, pelo que não tem quaisquer definições/substituições na lista seguinte." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588 -msgctxt "@action:label" -msgid "Your current settings match the selected profile." -msgstr "As suas definições atuais correspondem ao perfil selecionado." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606 -msgctxt "@title:tab" -msgid "Global Settings" -msgstr "Definições Globais" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61 -msgctxt "@info:status" -msgid "Calculated" -msgstr "Calculado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75 -msgctxt "@title:column" -msgid "Setting" -msgstr "Definição" +msgid "" +"This setting is normally calculated, but it currently has an absolute value set.\n" +"\n" +"Click to restore the calculated value." +msgstr "" +"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n" +"\n" +"Clique para restaurar o valor calculado." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82 -msgctxt "@title:column" -msgid "Profile" -msgstr "Perfil" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27 +msgctxt "@info:tooltip" +msgid "3D View" +msgstr "Vista 3D" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89 -msgctxt "@title:column" -msgid "Current" -msgstr "Atual" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40 +msgctxt "@info:tooltip" +msgid "Front View" +msgstr "Vista Frente" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97 -msgctxt "@title:column" -msgid "Unit" -msgstr "Unidade" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53 +msgctxt "@info:tooltip" +msgid "Top View" +msgstr "Vista Cima" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14 -msgctxt "@title:tab" -msgid "Setting Visibility" -msgstr "Visibilidade das Definições" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66 +msgctxt "@info:tooltip" +msgid "Left View" +msgstr "Vista esquerda" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46 -msgctxt "@label:textbox" -msgid "Check all" -msgstr "Selecionar tudo" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79 +msgctxt "@info:tooltip" +msgid "Right View" +msgstr "Vista direita" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41 msgctxt "@label" msgid "Extruder" msgstr "Extrusor" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "A temperatura-alvo do extrusor. O extrusor irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento do extrusor será desligado." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "A temperatura atual deste extrusor." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "A temperatura-alvo de preaquecimento do extrusor." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Cancelar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 msgctxt "@button" msgid "Pre-heat" msgstr "Preaquecer" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "Aquecer o extrusor com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que o extrusor aqueça quando começar a impressão." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "A cor do material neste extrusor." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "O material neste extrusor." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "O nozzle inserido neste extrusor." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26 msgctxt "@label" msgid "Build plate" msgstr "Base de construção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "A temperatura desejada da base aquecida. A base irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento da base será desligado." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "A temperatura atual da base aquecida." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "A temperatura de pré-aquecimento da base." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "Aqueçer a base com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que a base aqueça quando começar a impressão." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52 msgctxt "@label" msgid "Printer control" msgstr "Controlo da impressora" @@ -4889,17 +5245,17 @@ msgstr "Controlo da impressora" # rever! # contexto?! # Jog? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67 msgctxt "@label" msgid "Jog Position" msgstr "Posição de deslocação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85 msgctxt "@label" msgid "X/Y" msgstr "X/Y" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192 msgctxt "@label" msgid "Z" msgstr "Z" @@ -4907,745 +5263,495 @@ msgstr "Z" # rever! # contexto?! # Jog? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Jog Distance" msgstr "Distância de deslocação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301 msgctxt "@label" msgid "Send G-code" msgstr "Enviar G-code" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Enviar um comando G-code personalizado para a impressora ligada. Prima \"Enter\" para enviar o comando." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "A impressora não está ligada." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 -msgctxt "@status" -msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." -msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 -msgctxt "@status" -msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." -msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 -msgctxt "@status" -msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." -msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 -msgctxt "@status" -msgid "The cloud connection is currently unavailable. Please check your internet connection." -msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238 -msgctxt "@button" -msgid "Add printer" -msgstr "Adicionar Impressora" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255 -msgctxt "@button" -msgid "Manage printers" -msgstr "Gerir impressoras" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 -msgctxt "@label" -msgid "Connected printers" -msgstr "Impressoras ligadas" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 -msgctxt "@label" -msgid "Preset printers" -msgstr "Impressoras predefinidas" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140 -msgctxt "@label" -msgid "Active print" -msgstr "Impressão ativa" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148 -msgctxt "@label" -msgid "Job Name" -msgstr "Nome do trabalho" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156 -msgctxt "@label" -msgid "Printing Time" -msgstr "Tempo de Impressão" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164 -msgctxt "@label" -msgid "Estimated time left" -msgstr "Tempo restante estimado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114 msgctxt "@label" -msgid "Profile" -msgstr "Perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170 -msgctxt "@tooltip" -msgid "" -"Some setting/override values are different from the values stored in the profile.\n" -"\n" -"Click to open the profile manager." -msgstr "" -"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n" -"\n" -"Clique para abrir o gestor de perfis." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146 -msgctxt "@label:header" -msgid "Custom profiles" -msgstr "Perfis personalizados" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 -msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" -msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" -msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" -msgstr[0] "Não existe um perfil %1 para a configuração do extrusor %2. O objetivo predefinido será usado como alternativa" -msgstr[1] "Não existe um perfil %1 para as configurações dos extrusores %2. O objetivo predefinido será usado como alternativa" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 -msgctxt "@label shown when we load a Gcode file" -msgid "Print setup disabled. G-code file can not be modified." -msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 -msgctxt "@button" -msgid "Recommended" -msgstr "Recomendado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 -msgctxt "@button" -msgid "Custom" -msgstr "Personalizado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 -msgctxt "@label:Should be short" -msgid "On" -msgstr "Ligado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 -msgctxt "@label:Should be short" -msgid "Off" -msgstr "Desligado" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33 -msgctxt "@label" -msgid "Experimental" -msgstr "Experimental" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29 -msgctxt "@label" -msgid "Adhesion" -msgstr "Aderência à Base de Construção" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74 -msgctxt "@label" -msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." -msgstr "Permite a impressão de uma aba ou raft. Isto irá adicionar, respetivamente, uma área plana em torno ou sob a base do seu objeto, que são fáceis de retirar posteriormente." +msgid "Is printed as support." +msgstr "É imprimido como suporte." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117 msgctxt "@label" -msgid "Gradual infill" -msgstr "Enchimento gradual" +msgid "Other models overlapping with this model are modified." +msgstr "Foram modificados outros modelos sobrepostos com este modelo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120 msgctxt "@label" -msgid "Gradual infill will gradually increase the amount of infill towards the top." -msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81 -msgctxt "@tooltip" -msgid "You have modified some profile settings. If you want to change these go to custom mode." -msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado." +msgid "Infill overlapping with this model is modified." +msgstr "Foi modificada a sobreposição de enchimento com este modelo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123 msgctxt "@label" -msgid "Support" -msgstr "Suportes" +msgid "Overlaps with this model are not supported." +msgstr "Não são suportadas sobreposições com este modelo." -# rever! -# collapse ? -# desmoronar? desabar? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71 -msgctxt "@label" -msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." -msgstr "Criar estruturas para suportar partes do modelo, suspensas ou com saliências. Sem estas estruturas, essas partes do modelo podem desmoronar durante a impressão." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130 +msgctxt "@label %1 is the number of settings it overrides." +msgid "Overrides %1 setting." +msgid_plural "Overrides %1 settings." +msgstr[0] "Substitui %1 definição." +msgstr[1] "Substitui %1 definições." -# rever! -# ocultas? -# escondidas? -# valor normal? automatico? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200 -msgctxt "@label" -msgid "" -"Some hidden settings use values different from their normal calculated value.\n" -"\n" -"Click to make these settings visible." -msgstr "" -"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n" -"\n" -"Clique para tornar estas definições visíveis." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90 +msgctxt "@action:button" +msgid "Marketplace" +msgstr "Mercado" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81 -msgctxt "@label" -msgid "This setting is not used because all the settings that it influences are overridden." -msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31 +msgctxt "@title:menu menubar:toplevel" +msgid "&Edit" +msgstr "&Editar" -# rever! -# Afeta? -# Influencia? -# Altera? -# Modifica? -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86 -msgctxt "@label Header for list of settings." -msgid "Affects" -msgstr "Modifica" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56 +msgctxt "@title:menu menubar:toplevel" +msgid "E&xtensions" +msgstr "E&xtensões" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91 -msgctxt "@label Header for list of settings." -msgid "Affected By" -msgstr "Modificado Por" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94 +msgctxt "@title:menu menubar:toplevel" +msgid "P&references" +msgstr "P&referências" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187 -msgctxt "@label" -msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." -msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102 +msgctxt "@title:menu menubar:toplevel" +msgid "&Help" +msgstr "&Ajuda" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191 -msgctxt "@label" -msgid "This setting is resolved from conflicting extruder-specific values:" -msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148 +msgctxt "@title:window" +msgid "New project" +msgstr "Novo projeto" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230 -msgctxt "@label" -msgid "" -"This setting has a value that is different from the profile.\n" -"\n" -"Click to restore the value of the profile." -msgstr "" -"Esta definição tem um valor que é diferente do perfil.\n" -"\n" -"Clique para restaurar o valor do perfil." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149 +msgctxt "@info:question" +msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." +msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257 msgctxt "@label" -msgid "" -"This setting is normally calculated, but it currently has an absolute value set.\n" -"\n" -"Click to restore the calculated value." -msgstr "" -"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n" -"\n" -"Clique para restaurar o valor calculado." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68 -msgctxt "@label:textbox" -msgid "Search settings" -msgstr "Procurar definições" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456 -msgctxt "@action:menu" -msgid "Copy value to all extruders" -msgstr "Copiar valor para todos os extrusores" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465 -msgctxt "@action:menu" -msgid "Copy all changed values to all extruders" -msgstr "Copiar todos os valores alterados para todos os extrusores" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502 -msgctxt "@action:menu" -msgid "Hide this setting" -msgstr "Esconder esta definição" +msgid "This package will be installed after restarting." +msgstr "Este pacote será instalado após reiniciar." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515 -msgctxt "@action:menu" -msgid "Don't show this setting" -msgstr "Não mostrar esta definição" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453 +msgctxt "@title:tab" +msgid "Settings" +msgstr "Definições" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519 -msgctxt "@action:menu" -msgid "Keep this setting visible" -msgstr "Manter esta definição visível" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576 +msgctxt "@title:window %1 is the application name" +msgid "Closing %1" +msgstr "A fechar %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27 -msgctxt "@info:tooltip" -msgid "3D View" -msgstr "Vista 3D" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589 +msgctxt "@label %1 is the application name" +msgid "Are you sure you want to exit %1?" +msgstr "Tem a certeza de que pretende sair de %1?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40 -msgctxt "@info:tooltip" -msgid "Front View" -msgstr "Vista Frente" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737 +msgctxt "@window:title" +msgid "Install Package" +msgstr "Instalar Pacote" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53 -msgctxt "@info:tooltip" -msgid "Top View" -msgstr "Vista Cima" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745 +msgctxt "@title:window" +msgid "Open File(s)" +msgstr "Abrir ficheiro(s)" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66 -msgctxt "@info:tooltip" -msgid "Left View" -msgstr "Vista esquerda" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748 +msgctxt "@text:window" +msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." +msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79 -msgctxt "@info:tooltip" -msgid "Right View" -msgstr "Vista direita" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857 +msgctxt "@title:window" +msgid "Add Printer" +msgstr "Adicionar Impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50 -msgctxt "@label" -msgid "View type" -msgstr "Ver tipo" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865 +msgctxt "@title:window" +msgid "What's New" +msgstr "Novidades" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 -msgctxt "@label" -msgid "Add a Cloud printer" -msgstr "Adicionar uma impressora de cloud" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 +msgctxt "@status" +msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." +msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 -msgctxt "@label" -msgid "Waiting for Cloud response" -msgstr "A aguardar resposta da cloud" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 +msgctxt "@status" +msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." +msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 -msgctxt "@label" -msgid "No printers found in your account?" -msgstr "Não foram encontradas impressoras na sua conta?" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 +msgctxt "@status" +msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." +msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 -msgctxt "@label" -msgid "The following printers in your account have been added in Cura:" -msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 +msgctxt "@status" +msgid "The cloud connection is currently unavailable. Please check your internet connection." +msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238 msgctxt "@button" -msgid "Add printer manually" -msgstr "Adicionar impressora manualmente" +msgid "Add printer" +msgstr "Adicionar Impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255 msgctxt "@button" -msgid "Finish" -msgstr "Concluir" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230 -msgctxt "@label" -msgid "Manufacturer" -msgstr "Fabricante" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247 -msgctxt "@label" -msgid "Profile author" -msgstr "Autor do perfil" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265 -msgctxt "@label" -msgid "Printer name" -msgstr "Nome da impressora" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274 -msgctxt "@text" -msgid "Please name your printer" -msgstr "Atribuir um nome à impressora" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 -msgctxt "@label" -msgid "Add a printer" -msgstr "Adicionar uma impressora" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 -msgctxt "@label" -msgid "Add a networked printer" -msgstr "Adicionar uma impressora em rede" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90 -msgctxt "@label" -msgid "Add a non-networked printer" -msgstr "Adicionar uma impressora sem rede" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 -msgctxt "@label" -msgid "There is no printer found over your network." -msgstr "Não foi encontrada nenhuma impressora na sua rede." +msgid "Manage printers" +msgstr "Gerir impressoras" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" -msgid "Refresh" -msgstr "Atualizar" +msgid "Connected printers" +msgstr "Impressoras ligadas" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" -msgid "Add printer by IP" -msgstr "Adicionar impressora por IP" +msgid "Preset printers" +msgstr "Impressoras predefinidas" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204 -msgctxt "@label" -msgid "Add cloud printer" -msgstr "Adicionar impressora de cloud" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16 +msgctxt "@label %1 is filled in with the name of an extruder" +msgid "Print Selected Model with %1" +msgid_plural "Print Selected Models with %1" +msgstr[0] "Imprimir Modelo Selecionado com o %1" +msgstr[1] "Imprimir Modelos Selecionados com o %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" -msgid "Troubleshooting" -msgstr "Resolução de problemas" +msgid "Time estimation" +msgstr "Estimativa de tempo" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 msgctxt "@label" -msgid "Add printer by IP address" -msgstr "Adicionar impressora por endereço IP" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 -msgctxt "@text" -msgid "Enter your printer's IP address." -msgstr "Introduza o endereço IP da sua impressora." - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 -msgctxt "@button" -msgid "Add" -msgstr "Adicionar" +msgid "Material estimation" +msgstr "Estimativa de material" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 -msgctxt "@label" -msgid "Could not connect to device." -msgstr "Não foi possível ligar ao dispositivo." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 +msgctxt "@label m for meter" +msgid "%1m" +msgstr "%1 m" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 -msgctxt "@label" -msgid "Can't connect to your Ultimaker printer?" -msgstr "Não se consegue ligar a uma impressora Ultimaker?" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 +msgctxt "@label g for grams" +msgid "%1g" +msgstr "%1 g" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 -msgctxt "@label" -msgid "The printer at this address has not responded yet." -msgstr "A impressora neste endereço ainda não respondeu." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55 +msgctxt "@label:PrintjobStatus" +msgid "Slicing..." +msgstr "A Seccionar..." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 -msgctxt "@label" -msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." -msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo." +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67 +msgctxt "@label:PrintjobStatus" +msgid "Unable to slice" +msgstr "Não é possível seccionar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" -msgid "Back" -msgstr "Anterior" +msgid "Processing" +msgstr "A processar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" -msgid "Connect" -msgstr "Ligar" +msgid "Slice" +msgstr "Segmentação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104 msgctxt "@label" -msgid "Ultimaker Account" -msgstr "Conta Ultimaker" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84 -msgctxt "@text" -msgid "Your key to connected 3D printing" -msgstr "A chave para a impressão 3D em rede" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101 -msgctxt "@text" -msgid "- Customize your experience with more print profiles and plugins" -msgstr "Personalize a sua experiência com mais perfis e plug-ins de impressão" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104 -msgctxt "@text" -msgid "- Stay flexible by syncing your setup and loading it anywhere" -msgstr "Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local" - -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107 -msgctxt "@text" -msgid "- Increase efficiency with a remote workflow on Ultimaker printers" -msgstr "Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker" +msgid "Start the slicing process" +msgstr "Iniciar o processo de segmentação" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118 msgctxt "@button" -msgid "Skip" -msgstr "Ignorar" +msgid "Cancel" +msgstr "Cancelar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" -msgid "Help us to improve Ultimaker Cura" -msgstr "Ajude-nos a melhorar o Ultimaker Cura" +msgid "No time estimation available" +msgstr "Nenhuma estimativa de tempo disponível" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 -msgctxt "@text" -msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" -msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 +msgctxt "@label" +msgid "No cost estimation available" +msgstr "Nenhuma estimativa de custos disponível" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 -msgctxt "@text" -msgid "Machine types" -msgstr "Tipos de máquina" +#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 +msgctxt "@button" +msgid "Preview" +msgstr "Pré-visualizar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 -msgctxt "@text" -msgid "Material usage" -msgstr "Utilização do material" +#: RemovableDriveOutputDevice/plugin.json +msgctxt "description" +msgid "Provides removable drive hotplugging and writing support." +msgstr "Fornece suporte de ligação da unidade amovível e suporte de gravação." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 -msgctxt "@text" -msgid "Number of slices" -msgstr "Número de segmentos" +#: RemovableDriveOutputDevice/plugin.json +msgctxt "name" +msgid "Removable Drive Output Device Plugin" +msgstr "Plug-in de dispositivo de saída da unidade amovível" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 -msgctxt "@text" -msgid "Print settings" -msgstr "Definições de impressão" +#: VersionUpgrade/VersionUpgrade35to40/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." +msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 -msgctxt "@text" -msgid "Data collected by Ultimaker Cura will not contain any personal information." -msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais." +#: VersionUpgrade/VersionUpgrade35to40/plugin.json +msgctxt "name" +msgid "Version Upgrade 3.5 to 4.0" +msgstr "Atualização da versão 3.5 para 4.0" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 -msgctxt "@text" -msgid "More information" -msgstr "Mais informações" +#: VersionUpgrade/VersionUpgrade462to47/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." +msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 -msgctxt "@label" -msgid "Empty" -msgstr "Vazio" +#: VersionUpgrade/VersionUpgrade462to47/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.6.2 to 4.7" +msgstr "Atualização da versão 4.6.2 para a versão 4.7" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 -msgctxt "@label" -msgid "User Agreement" -msgstr "Contrato de utilizador" +#: VersionUpgrade/VersionUpgrade22to24/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." +msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70 -msgctxt "@button" -msgid "Decline and close" -msgstr "Rejeitar e fechar" +#: VersionUpgrade/VersionUpgrade22to24/plugin.json +msgctxt "name" +msgid "Version Upgrade 2.2 to 2.4" +msgstr "Atualização da versão 2.2 para 2.4" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29 -msgctxt "@label" -msgid "Welcome to Ultimaker Cura" -msgstr "Bem-vindo ao Ultimaker Cura" +#: VersionUpgrade/VersionUpgrade42to43/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." +msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47 -msgctxt "@text" -msgid "" -"Please follow these steps to set up\n" -"Ultimaker Cura. This will only take a few moments." -msgstr "" -"Siga estes passos para configurar o\n" -"Ultimaker Cura. Este processo deverá demorar apenas alguns momentos." +#: VersionUpgrade/VersionUpgrade42to43/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.2 to 4.3" +msgstr "Atualização da versão 4.2 para 4.3" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58 -msgctxt "@button" -msgid "Get started" -msgstr "Iniciar" +#: VersionUpgrade/VersionUpgrade460to462/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." +msgstr "Atualiza as configurações do Cura 4.6.0 para o Cura 4.6.2." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24 -msgctxt "@label" -msgid "What's new in Ultimaker Cura" -msgstr "Novidades no Ultimaker Cura" +#: VersionUpgrade/VersionUpgrade460to462/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.6.0 to 4.6.2" +msgstr "Atualização da versão 4.6.0 para a versão 4.6.2" -#: ModelChecker/plugin.json +#: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" -msgid "Checks models and print configuration for possible printing issues and give suggestions." -msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões." +msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." +msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1." -#: ModelChecker/plugin.json +#: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" -msgid "Model Checker" -msgstr "Verificador de Modelos" +msgid "Version Upgrade 3.0 to 3.1" +msgstr "Atualização da versão 3.0 para 3.1" -#: 3MFReader/plugin.json +#: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" -msgid "Provides support for reading 3MF files." -msgstr "Fornece suporte para ler ficheiros 3MF." +msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." +msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1." -#: 3MFReader/plugin.json +#: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" -msgid "3MF Reader" -msgstr "Leitor de 3MF" +msgid "Version Upgrade 4.0 to 4.1" +msgstr "Atualização da versão 4.0 para 4.1" -#: 3MFWriter/plugin.json +#: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" -msgid "Provides support for writing 3MF files." -msgstr "Possiblita a gravação de ficheiros 3MF." +msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." +msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7." -#: 3MFWriter/plugin.json +#: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" -msgid "3MF Writer" -msgstr "Gravador 3MF" +msgid "Version Upgrade 2.6 to 2.7" +msgstr "Atualização da versão 2.6 para 2.7" -#: AMFReader/plugin.json +#: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" -msgid "Provides support for reading AMF files." -msgstr "Fornece suporte para ler ficheiros AMF." +msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." +msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6." -#: AMFReader/plugin.json +#: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" -msgid "AMF Reader" -msgstr "Leitor de AMF" +msgid "Version Upgrade 2.5 to 2.6" +msgstr "Atualização da versão 2.5 para 2.6" -#: CuraDrive/plugin.json +#: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" -msgid "Backup and restore your configuration." -msgstr "Efetua uma cópia de segurança e repõe a sua configuração." +msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." +msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2." -#: CuraDrive/plugin.json +#: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" -msgid "Cura Backups" -msgstr "Cópias de segurança do Cura" +msgid "Version Upgrade 4.1 to 4.2" +msgstr "Atualização da versão 4.1 para 4.2" -#: CuraEngineBackend/plugin.json +#: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" -msgid "Provides the link to the CuraEngine slicing backend." -msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine." +msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." +msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2." -#: CuraEngineBackend/plugin.json +#: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" -msgid "CuraEngine Backend" -msgstr "Back-end do CuraEngine" +msgid "Version Upgrade 2.1 to 2.2" +msgstr "Atualização da versão 2.1 para 2.2" -#: CuraProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" -msgid "Provides support for importing Cura profiles." -msgstr "Fornece suporte para importar perfis Cura." +msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." +msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3." -#: CuraProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" -msgid "Cura Profile Reader" -msgstr "Leitor de Perfis Cura" +msgid "Version Upgrade 3.2 to 3.3" +msgstr "Atualização da versão 3.2 para 3.3" -# rever! -# Fornece suporte para exportar perfis Cura. -#: CuraProfileWriter/plugin.json +#: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" -msgid "Provides support for exporting Cura profiles." -msgstr "Possibilita a exportação de perfis do Cura." +msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." +msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6." -#: CuraProfileWriter/plugin.json +#: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" -msgid "Cura Profile Writer" -msgstr "Gravador de perfis Cura" +msgid "Version Upgrade 4.5 to 4.6" +msgstr "Atualização da versão 4.5 para a versão 4.6" -#: FirmwareUpdateChecker/plugin.json +#: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" -msgid "Checks for firmware updates." -msgstr "Procura e verifica se existem atualizações de firmware." +msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." +msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5." -#: FirmwareUpdateChecker/plugin.json +#: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" -msgid "Firmware Update Checker" -msgstr "Verificador Atualizações Firmware" +msgid "Version Upgrade 4.4 to 4.5" +msgstr "Atualização da versão 4.4 para a versão 4.5" -#: FirmwareUpdater/plugin.json +#: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" -msgid "Provides a machine actions for updating firmware." -msgstr "Disponibiliza as ações da máquina para atualizar o firmware." +msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." +msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8." -#: FirmwareUpdater/plugin.json +#: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" -msgid "Firmware Updater" -msgstr "Atualizador de firmware" +msgid "Version Upgrade 4.7 to 4.8" +msgstr "Atualização da versão 4.7 para 4.8" -#: GCodeGzReader/plugin.json +#: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" -msgid "Reads g-code from a compressed archive." -msgstr "Lê o g-code a partir de um arquivo comprimido." +msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." +msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4." -#: GCodeGzReader/plugin.json +#: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" -msgid "Compressed G-code Reader" -msgstr "Leitor de G-code comprimido" +msgid "Version Upgrade 3.3 to 3.4" +msgstr "Atualização da versão 3.3 para 3.4" -#: GCodeGzWriter/plugin.json +#: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" -msgid "Writes g-code to a compressed archive." -msgstr "Grava o g-code num arquivo comprimido." +msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." +msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4." -#: GCodeGzWriter/plugin.json +#: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" -msgid "Compressed G-code Writer" -msgstr "Gravador de G-code comprimido" +msgid "Version Upgrade 4.3 to 4.4" +msgstr "Atualização da versão 4.3 para 4.4" -#: GCodeProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" -msgid "Provides support for importing profiles from g-code files." -msgstr "Permite importar perfis a partir de ficheiros g-code." +msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." +msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5." -#: GCodeProfileReader/plugin.json +#: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" -msgid "G-code Profile Reader" -msgstr "Leitor de perfis G-code" +msgid "Version Upgrade 3.4 to 3.5" +msgstr "Atualização da versão 3.4 para 3.5" -#: GCodeReader/plugin.json +#: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" -msgid "Allows loading and displaying G-code files." -msgstr "Permite abrir e visualizar ficheiros G-code." +msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." +msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0." -#: GCodeReader/plugin.json +#: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" -msgid "G-code Reader" -msgstr "Leitor de G-code" +msgid "Version Upgrade 2.7 to 3.0" +msgstr "Atualização da versão 2.7 para 3.0" -#: GCodeWriter/plugin.json +#: AMFReader/plugin.json msgctxt "description" -msgid "Writes g-code to a file." -msgstr "Grava o g-code num ficheiro." +msgid "Provides support for reading AMF files." +msgstr "Fornece suporte para ler ficheiros AMF." -#: GCodeWriter/plugin.json +#: AMFReader/plugin.json msgctxt "name" -msgid "G-code Writer" -msgstr "Gravador de G-code" +msgid "AMF Reader" +msgstr "Leitor de AMF" -#: ImageReader/plugin.json +#: GCodeProfileReader/plugin.json msgctxt "description" -msgid "Enables ability to generate printable geometry from 2D image files." -msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D." +msgid "Provides support for importing profiles from g-code files." +msgstr "Permite importar perfis a partir de ficheiros g-code." -#: ImageReader/plugin.json +#: GCodeProfileReader/plugin.json msgctxt "name" -msgid "Image Reader" -msgstr "Leitor de imagens" +msgid "G-code Profile Reader" +msgstr "Leitor de perfis G-code" -#: LegacyProfileReader/plugin.json +#: FirmwareUpdater/plugin.json msgctxt "description" -msgid "Provides support for importing profiles from legacy Cura versions." -msgstr "Permite importar perfis de versões antigas do Cura." +msgid "Provides a machine actions for updating firmware." +msgstr "Disponibiliza as ações da máquina para atualizar o firmware." -#: LegacyProfileReader/plugin.json +#: FirmwareUpdater/plugin.json msgctxt "name" -msgid "Legacy Cura Profile Reader" -msgstr "Leitor de perfis antigos do Cura" +msgid "Firmware Updater" +msgstr "Atualizador de firmware" -#: MachineSettingsAction/plugin.json +#: X3DReader/plugin.json msgctxt "description" -msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." -msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)." +msgid "Provides support for reading X3D files." +msgstr "Fornece suporte para ler ficheiros X3D." -#: MachineSettingsAction/plugin.json +#: X3DReader/plugin.json msgctxt "name" -msgid "Machine Settings Action" -msgstr "Função Definições da Máquina" +msgid "X3D Reader" +msgstr "Leitor de X3D" -#: MonitorStage/plugin.json +#: Toolbox/plugin.json msgctxt "description" -msgid "Provides a monitor stage in Cura." -msgstr "Fornece uma fase de monitorização no Cura." +msgid "Find, manage and install new Cura packages." +msgstr "Encontre, organize e instale novos pacotes para o Cura." -#: MonitorStage/plugin.json +#: Toolbox/plugin.json msgctxt "name" -msgid "Monitor Stage" -msgstr "Fase de monitorização" +msgid "Toolbox" +msgstr "Toolbox" #: PerObjectSettingsTool/plugin.json msgctxt "description" @@ -5667,76 +5773,117 @@ msgctxt "name" msgid "Post Processing" msgstr "Pós-Processamento" -#: PrepareStage/plugin.json +#: CuraEngineBackend/plugin.json msgctxt "description" -msgid "Provides a prepare stage in Cura." -msgstr "Fornece uma fase de preparação no Cura." +msgid "Provides the link to the CuraEngine slicing backend." +msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine." -#: PrepareStage/plugin.json +#: CuraEngineBackend/plugin.json msgctxt "name" -msgid "Prepare Stage" -msgstr "Fase de preparação" +msgid "CuraEngine Backend" +msgstr "Back-end do CuraEngine" -#: PreviewStage/plugin.json +#: USBPrinting/plugin.json msgctxt "description" -msgid "Provides a preview stage in Cura." -msgstr "Fornece uma fase de pré-visualização no Cura." +msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." +msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware." -#: PreviewStage/plugin.json +#: USBPrinting/plugin.json msgctxt "name" -msgid "Preview Stage" -msgstr "Fase de pré-visualização" +msgid "USB printing" +msgstr "Impressão USB" -#: RemovableDriveOutputDevice/plugin.json +# rever! +# Fornece suporte para exportar perfis Cura. +#: CuraProfileWriter/plugin.json msgctxt "description" -msgid "Provides removable drive hotplugging and writing support." -msgstr "Fornece suporte de ligação da unidade amovível e suporte de gravação." +msgid "Provides support for exporting Cura profiles." +msgstr "Possibilita a exportação de perfis do Cura." -#: RemovableDriveOutputDevice/plugin.json +#: CuraProfileWriter/plugin.json msgctxt "name" -msgid "Removable Drive Output Device Plugin" -msgstr "Plug-in de dispositivo de saída da unidade amovível" +msgid "Cura Profile Writer" +msgstr "Gravador de perfis Cura" -#: SentryLogger/plugin.json +#: UM3NetworkPrinting/plugin.json msgctxt "description" -msgid "Logs certain events so that they can be used by the crash reporter" -msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\"" +msgid "Manages network connections to Ultimaker networked printers." +msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker." -#: SentryLogger/plugin.json +#: UM3NetworkPrinting/plugin.json msgctxt "name" -msgid "Sentry Logger" -msgstr "Sentry Logger" +msgid "Ultimaker Network Connection" +msgstr "Ligação de rede Ultimaker" -#: SimulationView/plugin.json +#: UltimakerMachineActions/plugin.json msgctxt "description" -msgid "Provides the Simulation view." -msgstr "Permite a visualização por camadas." +msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." +msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)." -# rever! -#: SimulationView/plugin.json +#: UltimakerMachineActions/plugin.json msgctxt "name" -msgid "Simulation View" -msgstr "Visualização por camadas" +msgid "Ultimaker machine actions" +msgstr "Funções para impressoras Ultimaker" -#: SliceInfoPlugin/plugin.json +#: 3MFReader/plugin.json msgctxt "description" -msgid "Submits anonymous slice info. Can be disabled through preferences." -msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências." +msgid "Provides support for reading 3MF files." +msgstr "Fornece suporte para ler ficheiros 3MF." -#: SliceInfoPlugin/plugin.json +#: 3MFReader/plugin.json msgctxt "name" -msgid "Slice info" -msgstr "Informações do seccionamento" +msgid "3MF Reader" +msgstr "Leitor de 3MF" -#: SolidView/plugin.json +#: GCodeGzWriter/plugin.json msgctxt "description" -msgid "Provides a normal solid mesh view." -msgstr "Permite a visualização (simples) dos objetos como sólidos." +msgid "Writes g-code to a compressed archive." +msgstr "Grava o g-code num arquivo comprimido." -#: SolidView/plugin.json +#: GCodeGzWriter/plugin.json msgctxt "name" -msgid "Solid View" -msgstr "Vista Sólidos" +msgid "Compressed G-code Writer" +msgstr "Gravador de G-code comprimido" + +#: GCodeGzReader/plugin.json +msgctxt "description" +msgid "Reads g-code from a compressed archive." +msgstr "Lê o g-code a partir de um arquivo comprimido." + +#: GCodeGzReader/plugin.json +msgctxt "name" +msgid "Compressed G-code Reader" +msgstr "Leitor de G-code comprimido" + +#: ModelChecker/plugin.json +msgctxt "description" +msgid "Checks models and print configuration for possible printing issues and give suggestions." +msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões." + +#: ModelChecker/plugin.json +msgctxt "name" +msgid "Model Checker" +msgstr "Verificador de Modelos" + +#: FirmwareUpdateChecker/plugin.json +msgctxt "description" +msgid "Checks for firmware updates." +msgstr "Procura e verifica se existem atualizações de firmware." + +#: FirmwareUpdateChecker/plugin.json +msgctxt "name" +msgid "Firmware Update Checker" +msgstr "Verificador Atualizações Firmware" + +#: GCodeReader/plugin.json +msgctxt "description" +msgid "Allows loading and displaying G-code files." +msgstr "Permite abrir e visualizar ficheiros G-code." + +#: GCodeReader/plugin.json +msgctxt "name" +msgid "G-code Reader" +msgstr "Leitor de G-code" #: SupportEraser/plugin.json msgctxt "description" @@ -5748,16 +5895,6 @@ msgctxt "name" msgid "Support Eraser" msgstr "Eliminador de suportes" -#: Toolbox/plugin.json -msgctxt "description" -msgid "Find, manage and install new Cura packages." -msgstr "Encontre, organize e instale novos pacotes para o Cura." - -#: Toolbox/plugin.json -msgctxt "name" -msgid "Toolbox" -msgstr "Toolbox" - #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." @@ -5768,6 +5905,16 @@ msgctxt "name" msgid "Trimesh Reader" msgstr "Leitor de Trimesh" +#: SentryLogger/plugin.json +msgctxt "description" +msgid "Logs certain events so that they can be used by the crash reporter" +msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\"" + +#: SentryLogger/plugin.json +msgctxt "name" +msgid "Sentry Logger" +msgstr "Sentry Logger" + #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." @@ -5778,265 +5925,254 @@ msgctxt "name" msgid "UFP Reader" msgstr "Leitor de UFP" -#: UFPWriter/plugin.json -msgctxt "description" -msgid "Provides support for writing Ultimaker Format Packages." -msgstr "Permite a gravação de arquivos Ultimaker Format." - -#: UFPWriter/plugin.json -msgctxt "name" -msgid "UFP Writer" -msgstr "Gravador de UFP" - -#: UltimakerMachineActions/plugin.json -msgctxt "description" -msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." -msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)." - -#: UltimakerMachineActions/plugin.json -msgctxt "name" -msgid "Ultimaker machine actions" -msgstr "Funções para impressoras Ultimaker" - -#: UM3NetworkPrinting/plugin.json +#: LegacyProfileReader/plugin.json msgctxt "description" -msgid "Manages network connections to Ultimaker networked printers." -msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker." +msgid "Provides support for importing profiles from legacy Cura versions." +msgstr "Permite importar perfis de versões antigas do Cura." -#: UM3NetworkPrinting/plugin.json +#: LegacyProfileReader/plugin.json msgctxt "name" -msgid "Ultimaker Network Connection" -msgstr "Ligação de rede Ultimaker" +msgid "Legacy Cura Profile Reader" +msgstr "Leitor de perfis antigos do Cura" -#: USBPrinting/plugin.json +#: PrepareStage/plugin.json msgctxt "description" -msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." -msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware." +msgid "Provides a prepare stage in Cura." +msgstr "Fornece uma fase de preparação no Cura." -#: USBPrinting/plugin.json +#: PrepareStage/plugin.json msgctxt "name" -msgid "USB printing" -msgstr "Impressão USB" +msgid "Prepare Stage" +msgstr "Fase de preparação" -#: VersionUpgrade/VersionUpgrade21to22/plugin.json +#: MonitorStage/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." -msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2." +msgid "Provides a monitor stage in Cura." +msgstr "Fornece uma fase de monitorização no Cura." -#: VersionUpgrade/VersionUpgrade21to22/plugin.json +#: MonitorStage/plugin.json msgctxt "name" -msgid "Version Upgrade 2.1 to 2.2" -msgstr "Atualização da versão 2.1 para 2.2" +msgid "Monitor Stage" +msgstr "Fase de monitorização" -#: VersionUpgrade/VersionUpgrade22to24/plugin.json +#: XRayView/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." -msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4." +msgid "Provides the X-Ray view." +msgstr "Permite a visualização em Raio-X." -#: VersionUpgrade/VersionUpgrade22to24/plugin.json +#: XRayView/plugin.json msgctxt "name" -msgid "Version Upgrade 2.2 to 2.4" -msgstr "Atualização da versão 2.2 para 2.4" +msgid "X-Ray View" +msgstr "Vista Raio-X" -#: VersionUpgrade/VersionUpgrade25to26/plugin.json +#: 3MFWriter/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." -msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6." +msgid "Provides support for writing 3MF files." +msgstr "Possiblita a gravação de ficheiros 3MF." -#: VersionUpgrade/VersionUpgrade25to26/plugin.json +#: 3MFWriter/plugin.json msgctxt "name" -msgid "Version Upgrade 2.5 to 2.6" -msgstr "Atualização da versão 2.5 para 2.6" +msgid "3MF Writer" +msgstr "Gravador 3MF" -#: VersionUpgrade/VersionUpgrade26to27/plugin.json +#: SliceInfoPlugin/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." -msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7." +msgid "Submits anonymous slice info. Can be disabled through preferences." +msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências." -#: VersionUpgrade/VersionUpgrade26to27/plugin.json +#: SliceInfoPlugin/plugin.json msgctxt "name" -msgid "Version Upgrade 2.6 to 2.7" -msgstr "Atualização da versão 2.6 para 2.7" +msgid "Slice info" +msgstr "Informações do seccionamento" -#: VersionUpgrade/VersionUpgrade27to30/plugin.json +#: PreviewStage/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0." +msgid "Provides a preview stage in Cura." +msgstr "Fornece uma fase de pré-visualização no Cura." -#: VersionUpgrade/VersionUpgrade27to30/plugin.json +#: PreviewStage/plugin.json msgctxt "name" -msgid "Version Upgrade 2.7 to 3.0" -msgstr "Atualização da versão 2.7 para 3.0" +msgid "Preview Stage" +msgstr "Fase de pré-visualização" -#: VersionUpgrade/VersionUpgrade30to31/plugin.json +#: SimulationView/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." -msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1." +msgid "Provides the Simulation view." +msgstr "Permite a visualização por camadas." -#: VersionUpgrade/VersionUpgrade30to31/plugin.json +# rever! +#: SimulationView/plugin.json msgctxt "name" -msgid "Version Upgrade 3.0 to 3.1" -msgstr "Atualização da versão 3.0 para 3.1" +msgid "Simulation View" +msgstr "Visualização por camadas" -#: VersionUpgrade/VersionUpgrade32to33/plugin.json +#: MachineSettingsAction/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." -msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3." +msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." +msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)." -#: VersionUpgrade/VersionUpgrade32to33/plugin.json +#: MachineSettingsAction/plugin.json msgctxt "name" -msgid "Version Upgrade 3.2 to 3.3" -msgstr "Atualização da versão 3.2 para 3.3" +msgid "Machine Settings Action" +msgstr "Função Definições da Máquina" -#: VersionUpgrade/VersionUpgrade33to34/plugin.json +#: XmlMaterialProfile/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." -msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4." +msgid "Provides capabilities to read and write XML-based material profiles." +msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML." -#: VersionUpgrade/VersionUpgrade33to34/plugin.json +#: XmlMaterialProfile/plugin.json msgctxt "name" -msgid "Version Upgrade 3.3 to 3.4" -msgstr "Atualização da versão 3.3 para 3.4" +msgid "Material Profiles" +msgstr "Perfis de Materiais" -#: VersionUpgrade/VersionUpgrade34to35/plugin.json +#: SolidView/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." -msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5." +msgid "Provides a normal solid mesh view." +msgstr "Permite a visualização (simples) dos objetos como sólidos." -#: VersionUpgrade/VersionUpgrade34to35/plugin.json +#: SolidView/plugin.json msgctxt "name" -msgid "Version Upgrade 3.4 to 3.5" -msgstr "Atualização da versão 3.4 para 3.5" +msgid "Solid View" +msgstr "Vista Sólidos" -#: VersionUpgrade/VersionUpgrade35to40/plugin.json +#: CuraProfileReader/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." -msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0." +msgid "Provides support for importing Cura profiles." +msgstr "Fornece suporte para importar perfis Cura." -#: VersionUpgrade/VersionUpgrade35to40/plugin.json +#: CuraProfileReader/plugin.json msgctxt "name" -msgid "Version Upgrade 3.5 to 4.0" -msgstr "Atualização da versão 3.5 para 4.0" +msgid "Cura Profile Reader" +msgstr "Leitor de Perfis Cura" -#: VersionUpgrade/VersionUpgrade40to41/plugin.json +#: UFPWriter/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." -msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1." +msgid "Provides support for writing Ultimaker Format Packages." +msgstr "Permite a gravação de arquivos Ultimaker Format." -#: VersionUpgrade/VersionUpgrade40to41/plugin.json +#: UFPWriter/plugin.json msgctxt "name" -msgid "Version Upgrade 4.0 to 4.1" -msgstr "Atualização da versão 4.0 para 4.1" +msgid "UFP Writer" +msgstr "Gravador de UFP" -#: VersionUpgrade/VersionUpgrade41to42/plugin.json +#: GCodeWriter/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." -msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2." +msgid "Writes g-code to a file." +msgstr "Grava o g-code num ficheiro." -#: VersionUpgrade/VersionUpgrade41to42/plugin.json +#: GCodeWriter/plugin.json msgctxt "name" -msgid "Version Upgrade 4.1 to 4.2" -msgstr "Atualização da versão 4.1 para 4.2" +msgid "G-code Writer" +msgstr "Gravador de G-code" -#: VersionUpgrade/VersionUpgrade42to43/plugin.json +#: ImageReader/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." -msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3." +msgid "Enables ability to generate printable geometry from 2D image files." +msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D." -#: VersionUpgrade/VersionUpgrade42to43/plugin.json +#: ImageReader/plugin.json msgctxt "name" -msgid "Version Upgrade 4.2 to 4.3" -msgstr "Atualização da versão 4.2 para 4.3" +msgid "Image Reader" +msgstr "Leitor de imagens" -#: VersionUpgrade/VersionUpgrade43to44/plugin.json +#: CuraDrive/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." -msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4." +msgid "Backup and restore your configuration." +msgstr "Efetua uma cópia de segurança e repõe a sua configuração." -#: VersionUpgrade/VersionUpgrade43to44/plugin.json +#: CuraDrive/plugin.json msgctxt "name" -msgid "Version Upgrade 4.3 to 4.4" -msgstr "Atualização da versão 4.3 para 4.4" - -#: VersionUpgrade/VersionUpgrade44to45/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." -msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5." +msgid "Cura Backups" +msgstr "Cópias de segurança do Cura" -#: VersionUpgrade/VersionUpgrade44to45/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.4 to 4.5" -msgstr "Atualização da versão 4.4 para a versão 4.5" +#~ msgctxt "@info:status" +#~ msgid "Global stack is missing." +#~ msgstr "A pilha global está em falta." -#: VersionUpgrade/VersionUpgrade45to46/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." -msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6." +#~ msgctxt "@info:status" +#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces." +#~ msgstr "O seu modelo não é uma variedade. As áreas destacadas indicam superfícies extra ou em falta." -#: VersionUpgrade/VersionUpgrade45to46/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.5 to 4.6" -msgstr "Atualização da versão 4.5 para a versão 4.6" +#~ msgctxt "@info:title" +#~ msgid "Model errors" +#~ msgstr "Erros de modelo" -#: VersionUpgrade/VersionUpgrade460to462/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." -msgstr "Atualiza as configurações do Cura 4.6.0 para o Cura 4.6.2." +#~ msgctxt "@label:listbox" +#~ msgid "Layer thickness" +#~ msgstr "Espessura da Camada" -#: VersionUpgrade/VersionUpgrade460to462/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.6.0 to 4.6.2" -msgstr "Atualização da versão 4.6.0 para a versão 4.6.2" +#~ msgctxt "@label" +#~ msgid "Your key to connected 3D printing" +#~ msgstr "A chave para a impressão 3D em rede" -#: VersionUpgrade/VersionUpgrade462to47/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." -msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7." +#~ msgctxt "@text" +#~ msgid "" +#~ "- Customize your experience with more print profiles and plugins\n" +#~ "- Stay flexible by syncing your setup and loading it anywhere\n" +#~ "- Increase efficiency with a remote workflow on Ultimaker printers" +#~ msgstr "" +#~ "- Personalize a sua experiência com mais perfis e plug-ins de impressão\n" +#~ "- Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local\n" +#~ "- Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker" -#: VersionUpgrade/VersionUpgrade462to47/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.6.2 to 4.7" -msgstr "Atualização da versão 4.6.2 para a versão 4.7" +#~ msgctxt "@button" +#~ msgid "Create account" +#~ msgstr "Criar conta" + +#~ msgctxt "@action:inmenu menubar:edit" +#~ msgid "Delete Selected Model" +#~ msgid_plural "Delete Selected Models" +#~ msgstr[0] "Apagar Modelo Selecionado" +#~ msgstr[1] "Apagar Modelos Selecionados" + +#~ msgctxt "@action:inmenu menubar:edit" +#~ msgid "Center Selected Model" +#~ msgid_plural "Center Selected Models" +#~ msgstr[0] "Centrar modelo selecionado" +#~ msgstr[1] "Centrar modelos selecionados" + +#~ msgctxt "@action:inmenu menubar:edit" +#~ msgid "Multiply Selected Model" +#~ msgid_plural "Multiply Selected Models" +#~ msgstr[0] "Multiplicar modelo selecionado" +#~ msgstr[1] "Multiplicar modelos selecionados" -#: VersionUpgrade/VersionUpgrade47to48/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." -msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8." +#~ msgctxt "@button" +#~ msgid "Finish" +#~ msgstr "Concluir" -#: VersionUpgrade/VersionUpgrade47to48/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.7 to 4.8" -msgstr "Atualização da versão 4.7 para 4.8" +#~ msgctxt "@label" +#~ msgid "Ultimaker Account" +#~ msgstr "Conta Ultimaker" -#: X3DReader/plugin.json -msgctxt "description" -msgid "Provides support for reading X3D files." -msgstr "Fornece suporte para ler ficheiros X3D." +#~ msgctxt "@text" +#~ msgid "Your key to connected 3D printing" +#~ msgstr "A chave para a impressão 3D em rede" -#: X3DReader/plugin.json -msgctxt "name" -msgid "X3D Reader" -msgstr "Leitor de X3D" +#~ msgctxt "@text" +#~ msgid "- Customize your experience with more print profiles and plugins" +#~ msgstr "Personalize a sua experiência com mais perfis e plug-ins de impressão" -#: XmlMaterialProfile/plugin.json -msgctxt "description" -msgid "Provides capabilities to read and write XML-based material profiles." -msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML." +#~ msgctxt "@text" +#~ msgid "- Stay flexible by syncing your setup and loading it anywhere" +#~ msgstr "Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local" -#: XmlMaterialProfile/plugin.json -msgctxt "name" -msgid "Material Profiles" -msgstr "Perfis de Materiais" +#~ msgctxt "@text" +#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers" +#~ msgstr "Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker" -#: XRayView/plugin.json -msgctxt "description" -msgid "Provides the X-Ray view." -msgstr "Permite a visualização em Raio-X." +#~ msgctxt "@text" +#~ msgid "" +#~ "Please follow these steps to set up\n" +#~ "Ultimaker Cura. This will only take a few moments." +#~ msgstr "" +#~ "Siga estes passos para configurar o\n" +#~ "Ultimaker Cura. Este processo deverá demorar apenas alguns momentos." -#: XRayView/plugin.json -msgctxt "name" -msgid "X-Ray View" -msgstr "Vista Raio-X" +#~ msgctxt "@label" +#~ msgid "What's new in Ultimaker Cura" +#~ msgstr "Novidades no Ultimaker Cura" #~ msgctxt "@label ({} is object name)" #~ msgid "Are you sure you wish to remove {}? This cannot be undone!" |