diff options
Diffstat (limited to 'resources/quality/key3d/key3d_tyro_normal.inst.cfg')
| -rw-r--r-- | resources/quality/key3d/key3d_tyro_normal.inst.cfg | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/resources/quality/key3d/key3d_tyro_normal.inst.cfg b/resources/quality/key3d/key3d_tyro_normal.inst.cfg new file mode 100644 index 0000000000..7f650612ff --- /dev/null +++ b/resources/quality/key3d/key3d_tyro_normal.inst.cfg @@ -0,0 +1,127 @@ +[general] +version = 4 +name = Normal Quality +definition = key3d_tyro + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +layer_height = 0.16 +layer_height_0 = 0.24 +line_width = 0.4 +initial_layer_line_width_factor = 100 +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +roofing_layer_count = 1 +top_bottom_thickness = 0.6 +top_thickness = 0.8 +top_layers = 5 +bottom_thickness = 0.6 +bottom_layers = 3 +top_bottom_pattern = lines +top_bottom_pattern_0 = lines +wall_0_inset = 0 +optimize_wall_printing_order = False +outer_inset_first = False +alternate_extra_perimeter = False +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +wall_min_flow = 0 +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +fill_outline_gaps = True +xy_offset = 0 +skin_no_small_gaps_heuristic = True +skin_outline_count = 1 +ironing_enabled = False +infill_sparse_density = 20 +zig_zaggify_infill = False +infill_multiplier = 1 +infill_wall_line_count = 0 +infill_overlap = 10 +skin_overlap = 5 +infill_wipe_dist = 0.1 +gradual_infill_steps = 0 +infill_before_walls = False +infill_support_enabled = False +max_skin_angle_for_expansion = 90 +material_diameter = 1.75 +default_material_print_temperature = 220 +material_print_temperature = 220 +material_print_temperature_layer_0 = 220 +material_initial_print_temperature = 220 +material_final_print_temperature = 220 +default_material_bed_temperature = 0 +material_bed_temperature = 0 +build_volume_temperature = 0 +material_flow = 100 +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 5 +retraction_speed = 45 +retraction_extra_prime_amount = 0 +retraction_min_travel = 0.8 +retraction_count_max = 90 +retraction_extrusion_window = 5 +limit_support_retractions = True +switch_extruder_retraction_amount = 16 +switch_extruder_retraction_speeds = 20 +speed_print = 50 +speed_travel = 150 +speed_layer_0 = 10 +speed_travel_layer_0 = 50 +speed_slowdown_layers = 2 +speed_equalize_flow_enabled = False +acceleration_enabled = False +acceleration_roofing = 3000 +jerk_enabled = False +retraction_combing = off +travel_retract_before_outer_wall = False +retraction_hop_enabled = False +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.32 +cool_lift_head = False +support_enable = True +support_type = everywhere +support_angle = 50 +support_pattern = grid +support_wall_count = 0 +zig_zaggify_support = False +support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20 +support_infill_angles = [0] +support_brim_enable = True +support_brim_line_count = 5 +support_z_distance = 0.21 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.2 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5.0 +support_join_distance = 2.0 +support_offset = 0.2 +gradual_support_infill_steps = 0 +support_roof_enable = True +support_bottom_enable = False +support_roof_height = 0.45 +support_roof_density = 45 +support_roof_pattern = lines +support_fan_enable = False +support_use_towers = True +support_tower_diameter = 3 +support_tower_roof_angle = 65 +adhesion_type = skirt +skirt_line_count = 2 +skirt_gap = 3 +meshfix_union_all = True +meshfix_union_all_remove_holes = False +meshfix_extensive_stitching = False +meshfix_keep_open_polygons = False +multiple_mesh_overlap = 0.16 +carve_multiple_volumes = False |