diff options
Diffstat (limited to 'resources/quality/nps/nps_PETG_B.inst.cfg')
| -rw-r--r-- | resources/quality/nps/nps_PETG_B.inst.cfg | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg new file mode 100644 index 0000000000..aa7eb30599 --- /dev/null +++ b/resources/quality/nps/nps_PETG_B.inst.cfg @@ -0,0 +1,46 @@ +[general]
+version = 4
+name = B
+definition = nps
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = b
+weight = 0
+material = naxe_PETG
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file |