diff options
Diffstat (limited to 'resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg')
-rw-r--r-- | resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg new file mode 100644 index 0000000000..80c7c4c6ad --- /dev/null +++ b/resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 17 +type = quality +quality_type = b +weight = 0 +material = emotiontech_copa +variant = High temp 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +wall_0_wipe_dist = =machine_nozzle_size/2 +wall_line_count = 3 +speed_print = 35 +speed_wall = =math.ceil(speed_print * 37/55) +speed_wall_0 = =math.ceil(speed_wall * 33/37) +speed_topbottom = =math.ceil(speed_print * 37/55) +speed_layer_0 = =math.ceil(speed_print * 25/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 20 +cool_fan_speed_max = 80 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 2 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 2 +cool_lift_head = True +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_initial_print_temperature = =default_material_print_temperature +material_final_print_temperature = =default_material_print_temperature +material_flow = 91 +skin_material_flow = 92 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True +bridge_settings_enabled = True +bridge_wall_coast = 50 +bridge_wall_speed = 8 +bridge_wall_material_flow = 50 +bridge_skin_speed = 8 +bridge_skin_material_flow = 60 +bridge_skin_density = 80 +bridge_fan_speed = 80 +meshfix_maximum_resolution = 0.5 +meshfix_maximum_deviation = 0.04 |