1 files changed, 42 insertions, 0 deletions
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..2aebe1e918
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_cpe_plus
+variant = 0.4 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+line_width = 0.38
+raft_airgap = 0.37
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+raft_surface_line_width = 0.38
+speed_layer_0 = =math.ceil(speed_print * 15 / 35)
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 20 / 35)
+speed_wall_0 = =math.ceil(speed_print * 20 / 35)
+speed_wall_x = =math.ceil(speed_print * 30 / 35)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.5
+wall_thickness = 1.14
+retraction_combing_max_distance = 50
+\ No newline at end of file