diff options
Diffstat (limited to 'resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg | 128 |
1 files changed, 64 insertions, 64 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 18b51bb319..242cca1ecf 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -1,64 +1,64 @@ -[general]
-version = 2
-name = Normal
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = fast
-material = generic_pc_ultimaker3_AA_0.4
-weight = -1
-setting_version = 1
-
-[values]
-acceleration_enabled = True
-acceleration_print = 4000
-adhesion_type = raft
-brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + layer_height
-cool_fan_speed_max = 85
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 7
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
-infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_wipe_dist = 0.1
-jerk_enabled = True
-jerk_print = 25
-layer_height = 0.15
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
-material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 40
-prime_tower_enable = True
-prime_tower_wipe_enabled = True
-raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
-retraction_prime_speed = 15
-skin_overlap = 30
-speed_layer_0 = 25
-speed_print = 50
-speed_topbottom = 25
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 40 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
-support_interface_density = 87.5
-support_interface_pattern = lines
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 20
-switch_extruder_retraction_speeds = 35
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
-wall_thickness = 1.2
+[general] +version = 2 +name = Normal +definition = ultimaker3 + +[metadata] +type = quality +quality_type = fast +material = generic_pc_ultimaker3_AA_0.4 +weight = -1 +setting_version = 2 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = raft +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 85 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 7 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap_mm = 0.05 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +layer_height = 0.15 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_enabled = True +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = 25 +speed_print = 50 +speed_topbottom = 25 +speed_travel = 250 +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 |