diff options
Diffstat (limited to 'resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg | 132 |
1 files changed, 66 insertions, 66 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 01fe47a6a2..451aa19f60 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -1,66 +1,66 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = high -material = generic_pc_ultimaker3_AA_0.4 -weight = 1 - -[values] -acceleration_enabled = True -acceleration_print = 4000 -adhesion_type = raft -brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height -cool_fan_speed_max = 50 -cool_min_layer_time_fan_speed_max = 5 -cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) -infill_overlap = 0 -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_wipe_dist = 0.1 -jerk_enabled = True -jerk_print = 25 -layer_height = 0.06 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 -material_print_temperature = =default_material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_airgap = 0.25 -retraction_count_max = 80 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 -retraction_prime_speed = 15 -skin_overlap = 30 -speed_layer_0 = 25 -speed_print = 50 -speed_topbottom = 25 -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 40 / 50) -speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance -support_interface_density = 87.5 -support_interface_pattern = lines -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 20 -switch_extruder_retraction_speeds = 35 -travel_avoid_distance = 3 -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) -wall_thickness = 1.2 -xy_offset = -0.15 +[general]
+version = 2
+name = High Quality
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = high
+material = generic_pc_ultimaker3_AA_0.4
+weight = 1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = raft
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 8
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap = 0
+infill_overlap_mm = 0.05
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+layer_height = 0.06
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = 25
+speed_print = 50
+speed_topbottom = 25
+speed_travel = 250
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2
+xy_offset = -0.15
|