diff options
Diffstat (limited to 'resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg | 7 |
1 files changed, 1 insertions, 6 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 4c1c2a1d9e..cfeb6d3a27 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -12,14 +12,12 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 @@ -27,7 +25,6 @@ infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.2 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -47,7 +44,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -61,5 +57,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 |