diff options
Diffstat (limited to 'resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 5 |
1 files changed, 0 insertions, 5 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 7a23352c58..a05a640e0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -41,7 +39,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_travel = 300 @@ -49,7 +46,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -57,5 +53,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 |