diff options
Diffstat (limited to 'resources/quality/ultimaker3')
20 files changed, 20 insertions, 20 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index 77af8bae1e..f26fcd025f 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -31,9 +31,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 45 +retraction_count_max = 15 retraction_extra_prime_amount = 0.2 -retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 5a49c5d95f..c151870622 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -38,9 +38,8 @@ prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_amount = 6.5 -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 1da161a2fb..7e21bec438 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -37,9 +37,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 52aadd5b2d..e37f16bc72 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -36,9 +36,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index b5cc9b7261..0cf30a04ca 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 4e7696c0b3..66e1160692 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -37,9 +37,8 @@ material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_amount = 7 -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index caed386864..c0889bdbeb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -34,9 +34,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 8fdcd54797..6510c0db81 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index ff729395b9..d37c9aef29 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 911932c819..2313d3e7f2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 53bf19e17b..e68fde0763 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index a1cfef6d5f..c0c9e7c48a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -31,7 +31,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 388959da4a..e85db940a5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index ae1cd2f262..a9adf2e3de 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -16,5 +16,6 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 20 support_brim_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 9652a2f50a..90be6c2b37 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -16,6 +16,7 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 15 support_brim_enable = True support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 72cc7dc901..98d9566577 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,5 +15,6 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.18 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index e828b94f2e..cc8c3bf10a 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index e7c07c73fa..6a54c04e7b 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.8 brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index bcb92ccefa..7947e3cfe8 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -15,5 +15,6 @@ variant = BB 0.8 brim_replaces_support = False layer_height = 0.4 material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_interface_height = 0.9 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index 3ce14a2ad0..3e2c92bbf6 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = BB 0.8 brim_replaces_support = False layer_height = 0.3 material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_height = 1.2 |