diff options
Diffstat (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg new file mode 100644 index 0000000000..548cdbdb0d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_pc +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 85 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 7 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap_mm = 0.05 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) + +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 |