diff options
Diffstat (limited to 'resources/quality/ultimaker_s3')
30 files changed, 0 insertions, 54 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 071db69a43..6c7119b683 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -41,7 +41,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg index af2a491912..b9fb0ce221 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg index b836a5ac75..1aef0a2e54 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg @@ -26,13 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg index a4ac385d1c..748cde5bf7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -24,14 +24,8 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg index 76a16f87df..fe3cecf254 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = 0.3 support_bottom_distance = 0.3 support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 5190288662..01a67d5e0c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -49,7 +49,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 5467595bd3..dd9e932c32 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -47,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index c694b5db79..87e4c43f76 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -50,7 +50,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 5287ce24c4..93196d462c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -48,7 +48,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 6af1fe5ae6..d6887f655d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 30cd2da9b0..c333d0e4b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 8d54246f13..1491af9743 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2 material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index f650f796bc..fdad9fc5df 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -26,7 +26,6 @@ material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index a9a14307f1..9f12894816 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2 material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 14a7451bcc..1727dd8711 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -33,7 +33,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index c466b76c1c..c71f536f40 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -34,7 +34,6 @@ retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 804149a584..70583773b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -32,7 +32,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index 7551e2e39f..622bc635c7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -32,5 +32,4 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index bc1b444d93..f20bde1f59 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -34,5 +34,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 4b6aa5629a..d4a02e65e8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -35,5 +35,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index ab71a4c37e..92930eae98 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index ac2181d373..229b010d6a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -42,7 +42,6 @@ speed_wall_x = =speed_print speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index e4bb128599..3ec91f0f9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg index 8bd0e5d375..6bbccd8acb 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -18,4 +18,3 @@ material_standby_temperature = 100 retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 -support_interface_height = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg index c1cbac87a0..b1ffea8db0 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -16,4 +16,3 @@ brim_replaces_support = False material_standby_temperature = 100 retraction_count_max = 5 support_brim_enable = True -support_interface_height = 0.9 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg index b5e22bef62..96a9b73ea5 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -17,4 +17,3 @@ material_standby_temperature = 100 retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 -support_interface_height = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index f015b749d2..10d8666ade 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index 88b079b388..5a9f03349a 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index 8f6492f82d..237eda83e3 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index b8e45c49fb..c561977e5b 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 |