diff options
Diffstat (limited to 'resources/quality/ultimaker_s3')
32 files changed, 21 insertions, 35 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg index d875b9c8f3..5ced8748b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] retraction_combing_max_distance = 50 -retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index a3a0073bba..071db69a43 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -30,7 +30,6 @@ prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) -retraction_count_max = 80 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index 516f24dec5..6c3a7e7a81 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] retraction_combing_max_distance = 8 -retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index cd5a6ece36..8ae871f4fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -30,9 +30,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 6 +retraction_count_max = 15 retraction_extra_prime_amount = 0.2 -retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 04feb8bc3e..b933ae005b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -27,7 +27,6 @@ multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True retraction_combing_max_distance = 50 -retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index f3dce95478..526e12bfe0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -28,7 +28,6 @@ multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True retraction_combing_max_distance = 50 -retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index dbcd95a344..be5d77a69e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -29,7 +29,6 @@ multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True retraction_combing_max_distance = 50 -retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index a4f6670bb6..bc16d73c04 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -29,7 +29,6 @@ multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True retraction_combing_max_distance = 50 -retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 85d31733e6..5190288662 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -38,8 +38,6 @@ prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) -retraction_count_max = 80 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 9581f95cf0..5467595bd3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -35,8 +35,6 @@ prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) -retraction_count_max = 80 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index ff5d6f4f7c..c694b5db79 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -38,8 +38,6 @@ prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) -retraction_count_max = 80 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index a61e50f280..5287ce24c4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -36,8 +36,6 @@ prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) -retraction_count_max = 80 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 17ff0c29c0..88089479ad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -35,9 +35,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 98af956680..dd35987ced 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -34,9 +34,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 377756def0..5eff4b3248 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -36,9 +36,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 49882c937e..90a68d134e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -34,9 +34,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 722a6bd2e8..d59d5c18f7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index ca8410766a..c0445e739c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 4572e3fabc..14a7451bcc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 596f34d7b9..c466b76c1c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 4f1a91337a..804149a584 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index dc4858e463..ab71a4c37e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index d2e23c81a9..ac2181d373 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 3d4076c08c..e4bb128599 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg index afb19f1769..94802d49fc 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg @@ -16,5 +16,6 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 20 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg index 6b1cef8991..bafe3e88d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg @@ -16,6 +16,7 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 15 support_brim_enable = True support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg index 0a9a37ca05..c1b9556636 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,5 +15,6 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.18 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg index a899959d98..0a4e11c158 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg index 0cd6094bbc..8bd0e5d375 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ is_experimental = True [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_height = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg index 388ebeff72..587b7b29cd 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.8 brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg index e9030819ea..c1cbac87a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -14,5 +14,6 @@ variant = BB 0.8 [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_interface_height = 0.9 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg index c35737bb97..b5e22bef62 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = BB 0.8 [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_height = 1.2 |