diff options
Diffstat (limited to 'resources/quality/ultimaker_s5')
47 files changed, 54 insertions, 54 deletions
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg index a69053b8ab..f8305eda7c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.25 prime_tower_size = 12 prime_tower_wall_thickness = 0.9 retraction_extrusion_window = 0.5 -speed_infill = 40 +speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index c188f37d96..bd5e8d08ff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -38,9 +38,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index f964bba440..6d7c46772c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -24,11 +24,11 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = 30 +speed_layer_0 = =speed_print speed_print = 30 speed_travel_layer_0 = 120 -speed_wall = 25 -speed_wall_0 = 20 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 72c16ebc1d..d4b4691be4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index b2c44dab01..2cf03fe4c9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 0470956c6d..9b819ad56a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 497071e01a..3fce280901 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index f080adb06f..3e1836b3b6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg index b4652d23dd..f33b562820 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg index bebc993ca3..6ed4df3844 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg index 40f0c2ab70..764094b897 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ material_print_temperature = =default_material_print_temperature - 10 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index bb5cad456f..aa34425a46 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -35,7 +35,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index ef3e8d7f4e..5ae2a219ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -35,7 +35,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index 823a6e0fdf..77b2201627 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 05c960e443..3963e53991 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 744b49b03b..3f0ff31ce1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index 58757c6dd1..7b4155c1e2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index 010ad9114a..01cf298308 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -19,7 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index 386350212d..bfec569199 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index ac23b19285..42c1e4c195 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 977ba5c309..76a1773bf4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 7e4ebed906..3d83a83d4e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 941561499b..5ec5bed4c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 04db39fc54..14562c3763 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -47,9 +47,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 65fd293954..e331f446f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -46,9 +46,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index d75b918479..afbb374fe2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -47,9 +47,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index ccffa0bc7c..969d7fc29c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -45,9 +45,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 8ea92a86d7..909af71245 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index 35a6c51ea4..fea7a76971 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index d739d132a9..d9ef5052e5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 7c86049fe1..a2eb547b08 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index e53cd8f7a8..fb806d2a8e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index e9d08feaff..30fe9772ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 58d9e1639a..7be40498f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 8adebb167e..d13e6a8b68 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -27,7 +27,7 @@ prime_tower_enable = False roofing_layer_count = 2 skin_outline_count = 0 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index 780ad37ab4..b41f7851cf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 3bcb7142e9..1c3f1470a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 45 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index b1e7eee3bb..81a952d743 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 56249427bf..5009b8395f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -46,7 +46,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index e362ffd25d..64475d822e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -46,7 +46,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 8ffe0afae6..ac6a62ae5a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -45,7 +45,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 4599155da4..3c1b47bfdb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 36654edf61..00ef557151 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 0588f2bf34..86535d5d77 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index fddb41d4b5..2e90b0215f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 9f364651c4..cf1dcfe540 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -21,7 +21,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index d3ee0ed88c..7c77bf1d53 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) |