diff options
Diffstat (limited to 'resources/quality/ultimaker_s5')
4 files changed, 6 insertions, 7 deletions
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 94be77a109..ef698a68e6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False -skin_outline_count = 0 skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 5c4734a32a..30eb73204b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -42,11 +42,11 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 62c40c1b18..b63ecbdad8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -42,11 +42,11 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 018b755036..ff25dd69a9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -41,11 +41,11 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 |