diff options
Diffstat (limited to 'resources/quality/ultimaker_s5')
8 files changed, 15 insertions, 10 deletions
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 96b7e79ad5..12b8cb993d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index d31ca4ffbe..89ea586ff0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index 07e19b9ca3..929557b076 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -20,7 +20,7 @@ prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 1ee17fd498..f13d0b015f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,6 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index 855a5ae292..0725dbd57b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -20,9 +20,9 @@ prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 6ea13295ba..f8c3ec8a15 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,7 +29,8 @@ top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 067033d1c3..a770f71fe6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 4092a930d3..896104d61a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -36,8 +36,9 @@ retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width |