diff options
Diffstat (limited to 'resources/quality/vzbot')
122 files changed, 1761 insertions, 0 deletions
diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_super.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_super.inst.cfg new file mode 100644 index 0000000000..1172d8936e --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_abs +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_ultra.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_ultra.inst.cfg new file mode 100644 index 0000000000..0edb3cc21e --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.2_ABS_ultra.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_abs +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_adaptive.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_adaptive.inst.cfg new file mode 100644 index 0000000000..4e0838328b --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_abs +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_low.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_low.inst.cfg new file mode 100644 index 0000000000..b7e74e6828 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_abs +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_standard.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_standard.inst.cfg new file mode 100644 index 0000000000..ffb06a5ed5 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_abs +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_super.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_super.inst.cfg new file mode 100644 index 0000000000..096008f445 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.3_ABS_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_abs +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_adaptive.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_adaptive.inst.cfg new file mode 100644 index 0000000000..44330c66ff --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_abs +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_low.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_low.inst.cfg new file mode 100644 index 0000000000..db55af0707 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_abs +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_standard.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_standard.inst.cfg new file mode 100644 index 0000000000..c900d791dc --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_abs +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_super.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_super.inst.cfg new file mode 100644 index 0000000000..dee4930c45 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.4_ABS_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_abs +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_adaptive.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_adaptive.inst.cfg new file mode 100644 index 0000000000..62503a0e57 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_abs +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_low.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_low.inst.cfg new file mode 100644 index 0000000000..3893a57516 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_abs +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_standard.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_standard.inst.cfg new file mode 100644 index 0000000000..074f737974 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_abs +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_super.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_super.inst.cfg new file mode 100644 index 0000000000..d38191adf6 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.5_ABS_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_abs +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.6_ABS_standard.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.6_ABS_standard.inst.cfg new file mode 100644 index 0000000000..ff2a7be6f8 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.6_ABS_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_abs +variant = 0.6mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/ABS/vzbot_0.8_ABS_draft.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_0.8_ABS_draft.inst.cfg new file mode 100644 index 0000000000..f9f87c4bde --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_0.8_ABS_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_abs +variant = 0.8mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/ABS/vzbot_1.0_ABS_draft.inst.cfg b/resources/quality/vzbot/base/ABS/vzbot_1.0_ABS_draft.inst.cfg new file mode 100644 index 0000000000..49acfd6c32 --- /dev/null +++ b/resources/quality/vzbot/base/ABS/vzbot_1.0_ABS_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_abs +variant = 1.0mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.2_PC_super.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.2_PC_super.inst.cfg new file mode 100644 index 0000000000..d81e378b7e --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.2_PC_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pc +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.2_PC_ultra.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.2_PC_ultra.inst.cfg new file mode 100644 index 0000000000..0138d8a2b1 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.2_PC_ultra.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_pc +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.3_PC_adaptive.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_adaptive.inst.cfg new file mode 100644 index 0000000000..b05b418263 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pc +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.3_PC_low.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_low.inst.cfg new file mode 100644 index 0000000000..9ef0d4a9d5 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pc +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.3_PC_standard.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_standard.inst.cfg new file mode 100644 index 0000000000..ce4fa4ec3b --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pc +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.3_PC_super.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_super.inst.cfg new file mode 100644 index 0000000000..bccbe5fd30 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.3_PC_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pc +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.4_PC_adaptive.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_adaptive.inst.cfg new file mode 100644 index 0000000000..007bf4a739 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pc +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.4_PC_low.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_low.inst.cfg new file mode 100644 index 0000000000..258b44c446 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pc +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.4_PC_standard.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_standard.inst.cfg new file mode 100644 index 0000000000..066563b61e --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pc +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.4_PC_super.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_super.inst.cfg new file mode 100644 index 0000000000..4064f8105d --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.4_PC_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pc +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.5_PC_adaptive.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_adaptive.inst.cfg new file mode 100644 index 0000000000..d05afb5d20 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pc +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.5_PC_low.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_low.inst.cfg new file mode 100644 index 0000000000..237b0f5143 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pc +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.5_PC_standard.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_standard.inst.cfg new file mode 100644 index 0000000000..5a80deba10 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pc +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.5_PC_super.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_super.inst.cfg new file mode 100644 index 0000000000..274d9a325d --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.5_PC_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pc +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.6_PC_standard.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.6_PC_standard.inst.cfg new file mode 100644 index 0000000000..24f08de191 --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.6_PC_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pc +variant = 0.6mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PC/vzbot_0.8_PC_draft.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_0.8_PC_draft.inst.cfg new file mode 100644 index 0000000000..4b677368fc --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_0.8_PC_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pc +variant = 0.8mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PC/vzbot_1.0_PC_draft.inst.cfg b/resources/quality/vzbot/base/PC/vzbot_1.0_PC_draft.inst.cfg new file mode 100644 index 0000000000..e50c5f689f --- /dev/null +++ b/resources/quality/vzbot/base/PC/vzbot_1.0_PC_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pc +variant = 1.0mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_super.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_super.inst.cfg new file mode 100644 index 0000000000..04d751e946 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_super.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_petg +variant = 0.2mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*8 +#retraction_extra_prime_amount = 0.5 + diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_ultra.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_ultra.inst.cfg new file mode 100644 index 0000000000..476c1d668b --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.2_PETG_ultra.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_petg +variant = 0.2mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*8 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_adaptive.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_adaptive.inst.cfg new file mode 100644 index 0000000000..a06d17c654 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_adaptive.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_petg +variant = 0.3mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_low.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_low.inst.cfg new file mode 100644 index 0000000000..d6ee8ad833 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_low.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_petg +variant = 0.3mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_standard.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_standard.inst.cfg new file mode 100644 index 0000000000..043ba4c6c9 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_standard.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_petg +variant = 0.3mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_super.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_super.inst.cfg new file mode 100644 index 0000000000..9d4c369e21 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.3_PETG_super.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_petg +variant = 0.3mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_adaptive.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_adaptive.inst.cfg new file mode 100644 index 0000000000..9fdd362428 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_adaptive.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_petg +variant = 0.4mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_low.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_low.inst.cfg new file mode 100644 index 0000000000..235f85aac9 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_low.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_petg +variant = 0.4mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_standard.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_standard.inst.cfg new file mode 100644 index 0000000000..5d7cbd0316 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_standard.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_petg +variant = 0.4mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_super.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_super.inst.cfg new file mode 100644 index 0000000000..9bd75af91e --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.4_PETG_super.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_petg +variant = 0.4mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_adaptive.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_adaptive.inst.cfg new file mode 100644 index 0000000000..2c81e446cd --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_adaptive.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_petg +variant = 0.5mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_low.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_low.inst.cfg new file mode 100644 index 0000000000..9ac33529c2 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_low.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_petg +variant = 0.5mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_standard.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_standard.inst.cfg new file mode 100644 index 0000000000..041afa5a51 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_standard.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_petg +variant = 0.5mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_super.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_super.inst.cfg new file mode 100644 index 0000000000..1774c159c8 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.5_PETG_super.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_petg +variant = 0.5mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*4 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.6_PETG_standard.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.6_PETG_standard.inst.cfg new file mode 100644 index 0000000000..b8bb0b9c2e --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.6_PETG_standard.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_petg +variant = 0.6mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*3 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_0.8_PETG_draft.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_0.8_PETG_draft.inst.cfg new file mode 100644 index 0000000000..6743af5426 --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_0.8_PETG_draft.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_petg +variant = 0.8mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*3 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PETG/vzbot_1.0_PETG_draft.inst.cfg b/resources/quality/vzbot/base/PETG/vzbot_1.0_PETG_draft.inst.cfg new file mode 100644 index 0000000000..2d5ce7738a --- /dev/null +++ b/resources/quality/vzbot/base/PETG/vzbot_1.0_PETG_draft.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_petg +variant = 1.0mm Nozzle + +[values] +speed_layer_0 = 15 +wall_thickness = =line_width*3 +#retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_super.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_super.inst.cfg new file mode 100644 index 0000000000..33a189c97a --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_super.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pla +variant = 0.2mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_ultra.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_ultra.inst.cfg new file mode 100644 index 0000000000..bdb0837012 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.2_PLA_ultra.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_pla +variant = 0.2mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_adaptive.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_adaptive.inst.cfg new file mode 100644 index 0000000000..e3b1f21133 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_adaptive.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pla +variant = 0.3mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_low.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_low.inst.cfg new file mode 100644 index 0000000000..5c10f5fe44 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_low.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pla +variant = 0.3mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_standard.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_standard.inst.cfg new file mode 100644 index 0000000000..31cc0964cc --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_standard.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pla +variant = 0.3mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_super.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_super.inst.cfg new file mode 100644 index 0000000000..db65a7a5fd --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.3_PLA_super.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pla +variant = 0.3mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_adaptive.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_adaptive.inst.cfg new file mode 100644 index 0000000000..5168a91040 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_adaptive.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pla +variant = 0.4mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_low.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_low.inst.cfg new file mode 100644 index 0000000000..fb1bc859aa --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_low.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pla +variant = 0.4mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_standard.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_standard.inst.cfg new file mode 100644 index 0000000000..dbc0304fb1 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_standard.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pla +variant = 0.4mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_super.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_super.inst.cfg new file mode 100644 index 0000000000..5d7ed6eda2 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.4_PLA_super.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pla +variant = 0.4mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_adaptive.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_adaptive.inst.cfg new file mode 100644 index 0000000000..1f34441e00 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_adaptive.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pla +variant = 0.5mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_low.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_low.inst.cfg new file mode 100644 index 0000000000..600905790b --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_low.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pla +variant = 0.5mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_standard.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_standard.inst.cfg new file mode 100644 index 0000000000..9beb4f15ed --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_standard.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pla +variant = 0.5mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_super.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_super.inst.cfg new file mode 100644 index 0000000000..df89cc112f --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.5_PLA_super.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pla +variant = 0.5mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_draft.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_draft.inst.cfg new file mode 100644 index 0000000000..ea70262be7 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_draft.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pla +variant = 0.6mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_low.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_low.inst.cfg new file mode 100644 index 0000000000..7b2de73fb6 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_low.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pla +variant = 0.6mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_standard.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_standard.inst.cfg new file mode 100644 index 0000000000..0cf308feed --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.6_PLA_standard.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pla +variant = 0.6mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_0.8_PLA_draft.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_0.8_PLA_draft.inst.cfg new file mode 100644 index 0000000000..f57384d4f8 --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_0.8_PLA_draft.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pla +variant = 0.8mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PLA/vzbot_1.0_PLA_draft.inst.cfg b/resources/quality/vzbot/base/PLA/vzbot_1.0_PLA_draft.inst.cfg new file mode 100644 index 0000000000..a8ff4828cf --- /dev/null +++ b/resources/quality/vzbot/base/PLA/vzbot_1.0_PLA_draft.inst.cfg @@ -0,0 +1,13 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pla +variant = 1.0mm Nozzle + +[values] diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_super.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_super.inst.cfg new file mode 100644 index 0000000000..44cd9ab901 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pva +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_ultra.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_ultra.inst.cfg new file mode 100644 index 0000000000..da03a40dbc --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.2_PVA_ultra.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_pva +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_adaptive.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_adaptive.inst.cfg new file mode 100644 index 0000000000..8d123ae44a --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pva +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_low.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_low.inst.cfg new file mode 100644 index 0000000000..028c68fc97 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pva +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_standard.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_standard.inst.cfg new file mode 100644 index 0000000000..430edb0ef4 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pva +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_super.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_super.inst.cfg new file mode 100644 index 0000000000..be21aab260 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.3_PVA_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pva +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_adaptive.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_adaptive.inst.cfg new file mode 100644 index 0000000000..e5cb2b3206 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pva +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_low.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_low.inst.cfg new file mode 100644 index 0000000000..8b40061ad9 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pva +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_standard.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_standard.inst.cfg new file mode 100644 index 0000000000..fd3ae9365e --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pva +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_super.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_super.inst.cfg new file mode 100644 index 0000000000..51b94b8f25 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.4_PVA_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pva +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_adaptive.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_adaptive.inst.cfg new file mode 100644 index 0000000000..71582cac63 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_pva +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_low.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_low.inst.cfg new file mode 100644 index 0000000000..4d05101be5 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_pva +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_standard.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_standard.inst.cfg new file mode 100644 index 0000000000..64033125b5 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pva +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_super.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_super.inst.cfg new file mode 100644 index 0000000000..cf53742dd9 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.5_PVA_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_pva +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.6_PVA_standard.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.6_PVA_standard.inst.cfg new file mode 100644 index 0000000000..fcd17e7c77 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.6_PVA_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_pva +variant = 0.6mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PVA/vzbot_0.8_PVA_draft.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_0.8_PVA_draft.inst.cfg new file mode 100644 index 0000000000..b38d437bb6 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_0.8_PVA_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pva +variant = 0.8mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/PVA/vzbot_1.0_PVA_draft.inst.cfg b/resources/quality/vzbot/base/PVA/vzbot_1.0_PVA_draft.inst.cfg new file mode 100644 index 0000000000..ef83c1e707 --- /dev/null +++ b/resources/quality/vzbot/base/PVA/vzbot_1.0_PVA_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_pva +variant = 1.0mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_adaptive.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_adaptive.inst.cfg new file mode 100644 index 0000000000..9ca773979e --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_adaptive.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_tpu +variant = 0.3mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_standard.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_standard.inst.cfg new file mode 100644 index 0000000000..db460cc2ae --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_standard.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_tpu +variant = 0.3mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_super.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_super.inst.cfg new file mode 100644 index 0000000000..d19f4e96ea --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.3_TPU_super.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_tpu +variant = 0.3mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_adaptive.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_adaptive.inst.cfg new file mode 100644 index 0000000000..4d40a7a6ac --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_adaptive.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_tpu +variant = 0.4mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_standard.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_standard.inst.cfg new file mode 100644 index 0000000000..e3ba8d9aa2 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_standard.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_tpu +variant = 0.4mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_super.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_super.inst.cfg new file mode 100644 index 0000000000..26d5dd1e9e --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.4_TPU_super.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_tpu +variant = 0.4mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_adaptive.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_adaptive.inst.cfg new file mode 100644 index 0000000000..14a2dce709 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_adaptive.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_tpu +variant = 0.5mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_standard.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_standard.inst.cfg new file mode 100644 index 0000000000..e139231910 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_standard.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_tpu +variant = 0.5mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_super.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_super.inst.cfg new file mode 100644 index 0000000000..ac167cee50 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.5_TPU_super.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_tpu +variant = 0.5mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.6_TPU_standard.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.6_TPU_standard.inst.cfg new file mode 100644 index 0000000000..c1b93cdb67 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.6_TPU_standard.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_tpu +variant = 0.6mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_0.8_TPU_draft.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_0.8_TPU_draft.inst.cfg new file mode 100644 index 0000000000..26fac84680 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_0.8_TPU_draft.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_tpu +variant = 0.8mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/TPU/vzbot_1.0_TPU_draft.inst.cfg b/resources/quality/vzbot/base/TPU/vzbot_1.0_TPU_draft.inst.cfg new file mode 100644 index 0000000000..3e0586e119 --- /dev/null +++ b/resources/quality/vzbot/base/TPU/vzbot_1.0_TPU_draft.inst.cfg @@ -0,0 +1,15 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_tpu +variant = 1.0mm Nozzle + +[values] +retraction_enable = False +speed_print = 150 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_super.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_super.inst.cfg new file mode 100644 index 0000000000..e6a89b1c87 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_nylon +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_ultra.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_ultra.inst.cfg new file mode 100644 index 0000000000..9c86dcd8b1 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.2_nylon_ultra.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +material = generic_nylon +variant = 0.2mm Nozzle + +[values] +wall_thickness = =line_width*8 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_adaptive.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_adaptive.inst.cfg new file mode 100644 index 0000000000..1a81dca16b --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_nylon +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_low.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_low.inst.cfg new file mode 100644 index 0000000000..8aa09c3fad --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_nylon +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_standard.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_standard.inst.cfg new file mode 100644 index 0000000000..f7686ef1e9 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_nylon +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_super.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_super.inst.cfg new file mode 100644 index 0000000000..b9c5d88753 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.3_nylon_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_nylon +variant = 0.3mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_adaptive.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_adaptive.inst.cfg new file mode 100644 index 0000000000..b50b782a2c --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_nylon +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_low.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_low.inst.cfg new file mode 100644 index 0000000000..0cceeee6ba --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_nylon +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_standard.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_standard.inst.cfg new file mode 100644 index 0000000000..23e7d27895 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_nylon +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_super.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_super.inst.cfg new file mode 100644 index 0000000000..2f94a9aa13 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.4_nylon_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_nylon +variant = 0.4mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_adaptive.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_adaptive.inst.cfg new file mode 100644 index 0000000000..ccd20b204d --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_adaptive.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +material = generic_nylon +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_low.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_low.inst.cfg new file mode 100644 index 0000000000..cba8ccba33 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_low.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +material = generic_nylon +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_standard.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_standard.inst.cfg new file mode 100644 index 0000000000..964a50083b --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_nylon +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_super.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_super.inst.cfg new file mode 100644 index 0000000000..f2c7dab429 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.5_nylon_super.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +material = generic_nylon +variant = 0.5mm Nozzle + +[values] +wall_thickness = =line_width*4 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.6_nylon_standard.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.6_nylon_standard.inst.cfg new file mode 100644 index 0000000000..966e963d61 --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.6_nylon_standard.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +material = generic_nylon +variant = 0.6mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/nylon/vzbot_0.8_nylon_draft.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_0.8_nylon_draft.inst.cfg new file mode 100644 index 0000000000..82589b81ac --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_0.8_nylon_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_nylon +variant = 0.8mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/nylon/vzbot_1.0_nylon_draft.inst.cfg b/resources/quality/vzbot/base/nylon/vzbot_1.0_nylon_draft.inst.cfg new file mode 100644 index 0000000000..bd465e599e --- /dev/null +++ b/resources/quality/vzbot/base/nylon/vzbot_1.0_nylon_draft.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +material = generic_nylon +variant = 1.0mm Nozzle + +[values] +wall_thickness = =line_width*3 diff --git a/resources/quality/vzbot/base/vzbot_global_adaptive.inst.cfg b/resources/quality/vzbot/base/vzbot_global_adaptive.inst.cfg new file mode 100644 index 0000000000..118d1d406d --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_adaptive.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Dynamic Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = adaptive +weight = -2 +global_quality = True + +[values] +layer_height = 0.16 +layer_height_0 = 0.20 +top_bottom_thickness = =layer_height_0+layer_height*4 +wall_thickness = =line_width*3 +support_interface_height = =layer_height*6 +adaptive_layer_height_enabled = true diff --git a/resources/quality/vzbot/base/vzbot_global_draft.inst.cfg b/resources/quality/vzbot/base/vzbot_global_draft.inst.cfg new file mode 100644 index 0000000000..5aa89ed91b --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_draft.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Draft Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +weight = -5 +global_quality = True + +[values] +layer_height = 0.32 +layer_height_0 = 0.32 +top_bottom_thickness = =layer_height_0+layer_height*3 +wall_thickness = =line_width*2 +support_interface_height = =layer_height*4 diff --git a/resources/quality/vzbot/base/vzbot_global_low.inst.cfg b/resources/quality/vzbot/base/vzbot_global_low.inst.cfg new file mode 100644 index 0000000000..096f6243cc --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_low.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Low Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = low +weight = -4 +global_quality = True + +[values] +layer_height = 0.28 +layer_height_0 = 0.28 +top_bottom_thickness = =layer_height_0+layer_height*3 +wall_thickness = =line_width*2 +support_interface_height = =layer_height*4 diff --git a/resources/quality/vzbot/base/vzbot_global_standard.inst.cfg b/resources/quality/vzbot/base/vzbot_global_standard.inst.cfg new file mode 100644 index 0000000000..1728f05845 --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_standard.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Standard Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = standard +weight = -3 +global_quality = True + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 +top_bottom_thickness = =layer_height_0+layer_height*3 +wall_thickness = =line_width*2 +support_interface_height = =layer_height*4 diff --git a/resources/quality/vzbot/base/vzbot_global_super.inst.cfg b/resources/quality/vzbot/base/vzbot_global_super.inst.cfg new file mode 100644 index 0000000000..edaab249fd --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_super.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Super Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = super +weight = -1 +global_quality = True + +[values] +layer_height = 0.12 +layer_height_0 = 0.12 +top_bottom_thickness = =layer_height_0+layer_height*6 +wall_thickness = =line_width*3 +support_interface_height = =layer_height*8 diff --git a/resources/quality/vzbot/base/vzbot_global_ultra.inst.cfg b/resources/quality/vzbot/base/vzbot_global_ultra.inst.cfg new file mode 100644 index 0000000000..b0be2d68d1 --- /dev/null +++ b/resources/quality/vzbot/base/vzbot_global_ultra.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Ultra Quality +definition = vzbot_base + +[metadata] +setting_version = 20 +type = quality +quality_type = ultra +weight = 0 +global_quality = True + +[values] +layer_height = 0.08 +layer_height_0 = 0.12 +top_bottom_thickness = =layer_height_0+layer_height*10 +wall_thickness = =line_width*3 +support_interface_height = =layer_height*12 |