diff options
Diffstat (limited to 'resources/quality/xyzprinting/pc')
8 files changed, 284 insertions, 0 deletions
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg new file mode 100644 index 0000000000..7417b7f268 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg new file mode 100644 index 0000000000..6a2d3ac048 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg new file mode 100644 index 0000000000..760e522bf6 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg new file mode 100644 index 0000000000..409e6e9277 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg new file mode 100644 index 0000000000..4bda3e06f5 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg new file mode 100644 index 0000000000..6cad309d6e --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg new file mode 100644 index 0000000000..a2df2ca7cc --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg new file mode 100644 index 0000000000..49da58822c --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file |