diff options
Diffstat (limited to 'resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg')
| -rw-r--r-- | resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg new file mode 100644 index 0000000000..6de215e455 --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file |