diff options
Diffstat (limited to 'resources/quality/xyzprinting')
60 files changed, 2035 insertions, 0 deletions
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg new file mode 100644 index 0000000000..fac98260b8 --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg new file mode 100644 index 0000000000..b1047a0577 --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg new file mode 100644 index 0000000000..5846b1145c --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg new file mode 100644 index 0000000000..5027575edc --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg new file mode 100644 index 0000000000..c68c4a0e92 --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg new file mode 100644 index 0000000000..324c68207b --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg new file mode 100644 index 0000000000..7e390cb12b --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg new file mode 100644 index 0000000000..fe0efc5e8a --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg new file mode 100644 index 0000000000..aaeab62950 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg new file mode 100644 index 0000000000..45c97e344c --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg new file mode 100644 index 0000000000..d6f51c85d4 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg new file mode 100644 index 0000000000..c577bd6678 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg new file mode 100644 index 0000000000..503910c500 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg new file mode 100644 index 0000000000..fea8145873 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg new file mode 100644 index 0000000000..2d28e6b062 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg new file mode 100644 index 0000000000..516150a974 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg new file mode 100644 index 0000000000..9b83cee870 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg new file mode 100644 index 0000000000..799358bf34 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg new file mode 100644 index 0000000000..fdcf2f80e1 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg new file mode 100644 index 0000000000..b7bd42adca --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg new file mode 100644 index 0000000000..20503c70ac --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +line_width = 0.4 +wall_line_width_x = 0.4 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +infill_material_flow = 85 +wall_material_flow = 85
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg new file mode 100644 index 0000000000..11eaf72a17 --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +line_width = 0.4 +wall_line_width_x = 0.4 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +infill_material_flow = 85 +wall_material_flow = 85
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg new file mode 100644 index 0000000000..f43dafa4c1 --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +line_width = 0.4 +wall_line_width_x = 0.4 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +infill_material_flow = 85 +wall_material_flow = 85
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg new file mode 100644 index 0000000000..88531025db --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +line_width = 0.4 +wall_line_width_x = 0.4 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +infill_material_flow = 85 +wall_material_flow = 85
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg new file mode 100644 index 0000000000..7417b7f268 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg new file mode 100644 index 0000000000..6a2d3ac048 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg new file mode 100644 index 0000000000..760e522bf6 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg new file mode 100644 index 0000000000..409e6e9277 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 1500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg new file mode 100644 index 0000000000..4bda3e06f5 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg new file mode 100644 index 0000000000..6cad309d6e --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg new file mode 100644 index 0000000000..a2df2ca7cc --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg new file mode 100644 index 0000000000..49da58822c --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +infill_line_width = 0.6 +line_width = 0.6 +wall_line_width_x = 0.6 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +speed_layer_0 = 15 +retraction_amount = 5.5 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0 +adhesion_type = brim
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg new file mode 100644 index 0000000000..a967c9956b --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg new file mode 100644 index 0000000000..78e5500de5 --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg new file mode 100644 index 0000000000..703d37f33b --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg new file mode 100644 index 0000000000..f44b43de5e --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg new file mode 100644 index 0000000000..3def2cabb0 --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg new file mode 100644 index 0000000000..cbf7927751 --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg new file mode 100644 index 0000000000..52b389e04a --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg new file mode 100644 index 0000000000..37c4da6dff --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt +acceleration_infill = 1000.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg new file mode 100644 index 0000000000..5cee03e58a --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg new file mode 100644 index 0000000000..0b82245914 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg new file mode 100644 index 0000000000..7497be10d9 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg new file mode 100644 index 0000000000..f01b09b4b5 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg new file mode 100644 index 0000000000..37ed24d55c --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 100 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +brim_width = 20.0 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0 +infill_material_flow = 85 +wall_material_flow = 85 diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg new file mode 100644 index 0000000000..841d1e2961 --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 100 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +brim_width = 20.0 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0 +infill_material_flow = 85 +wall_material_flow = 85 diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg new file mode 100644 index 0000000000..4c176e416e --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg new file mode 100644 index 0000000000..b3a24ea515 --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 100 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50 +brim_width = 20.0 +acceleration_infill = 1000.0 +acceleration_wall = 1000.0 +infill_material_flow = 85 +wall_material_flow = 85
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg new file mode 100644 index 0000000000..29194c06c4 --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg new file mode 100644 index 0000000000..83f3d1359a --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg new file mode 100644 index 0000000000..7b88f36bd6 --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg new file mode 100644 index 0000000000..6e024b2bd5 --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 80 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg new file mode 100644 index 0000000000..723b5336f0 --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100 +acceleration_infill = 1500.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg new file mode 100644 index 0000000000..57b5a3ece1 --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100 +acceleration_infill = 1500.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg new file mode 100644 index 0000000000..610d1b7040 --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100 +acceleration_infill = 1500.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg new file mode 100644 index 0000000000..34743b40dd --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100 +acceleration_infill = 1500.0 +acceleration_wall = 1000.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg new file mode 100644 index 0000000000..0012b1fa8a --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +global_quality = True + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg new file mode 100644 index 0000000000..35abe97de0 --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +global_quality = True + +[values] +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg new file mode 100644 index 0000000000..6af1354a7a --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +global_quality = True + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg new file mode 100644 index 0000000000..c1cb4bbca3 --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +global_quality = True + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file |