diff options
Diffstat (limited to 'resources/quality')
28 files changed, 36 insertions, 81 deletions
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg index 27bf2ce7dd..60c4210209 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg @@ -17,8 +17,7 @@ acceleration_travel = 3000 adhesion_type = skirt brim_width = 4.0 cool_fan_full_at_height = 0.5 -cool_fan_speed = 100 -cool_fan_speed_0 = 100 +cool_fan_speed_max = 100 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 25 @@ -28,10 +27,7 @@ jerk_print = 8 jerk_travel = 10 layer_height = 0.3 layer_height_0 = 0.3 -material_bed_temperature = 60 material_diameter = 1.75 -material_print_temperature = 200 -material_print_temperature_layer_0 = 0 retract_at_layer_change = False retraction_amount = 6 retraction_hop = 0.075 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg index 6005152107..209e2008d1 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg @@ -17,8 +17,7 @@ acceleration_travel = 3000 adhesion_type = skirt brim_width = 4.0 cool_fan_full_at_height = 0.5 -cool_fan_speed = 100 -cool_fan_speed_0 = 100 +cool_fan_speed_max = 100 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 25 @@ -28,10 +27,7 @@ jerk_print = 8 jerk_travel = 10 layer_height = 0.1 layer_height_0 = 0.1 -material_bed_temperature = 60 material_diameter = 1.75 -material_print_temperature = 200 -material_print_temperature_layer_0 = 0 retract_at_layer_change = False retraction_amount = 6 retraction_hop = 0.075 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg index b2c0309dc9..e0e4d0743b 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg @@ -17,8 +17,7 @@ acceleration_travel = 3000 adhesion_type = skirt brim_width = 4.0 cool_fan_full_at_height = 0.5 -cool_fan_speed = 100 -cool_fan_speed_0 = 100 +cool_fan_speed_max = 100 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 25 @@ -28,10 +27,7 @@ jerk_print = 8 jerk_travel = 10 layer_height = 0.2 layer_height_0 = 0.2 -material_bed_temperature = 60 material_diameter = 1.75 -material_print_temperature = 200 -material_print_temperature_layer_0 = 0 retract_at_layer_change = False retraction_amount = 6 retraction_hop = 0.075 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index 08a27aa3b4..0cef0f11da 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) raft_jerk = =jerk_layer_0 raft_margin = 10 @@ -33,6 +33,5 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width -raft_airgap = 0.4 raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index 9a8ed386c0..3ed16d3420 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) @@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index 615e8cc487..75619973a8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index 10149781cb..5edfda7541 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) @@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index 137a316f14..6aba500231 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) @@ -27,4 +27,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index f98d5c5d70..4949817547 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 9e4d40bcf3..026783cf17 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 755127b66f..f23ad38956 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 26f0b52f91..b97c0b9ffe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index c5613e0f49..81be2ebb6d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) @@ -35,4 +35,3 @@ acceleration_wall = 2000 acceleration_wall_0 = 2000 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 17967f923c..e57fc51db1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) @@ -31,4 +31,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 1c271f6af1..5abeff6589 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 @@ -33,4 +33,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 0aae33c115..56ab049b3b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 top_bottom_thickness = 1 wall_thickness = 1 @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 193e6de18b..5689aaff8b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) @@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 1aae14fe6b..854858ee5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 1c57587309..bb75703f87 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) @@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index ec2819cf93..4c850c4904 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,11 +19,10 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 0f1f2c872b..bd42d349c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index d3e3e43830..9fe2328c88 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 4a838d3b02..6bfd398d12 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 8c86a63b0b..7832217f95 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 25235ba336..dd674e9a6b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) @@ -35,4 +35,3 @@ layer_height_0 = 0.2 acceleration_wall = 2000 acceleration_wall_0 = 2000 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index f9ed0bc62a..d743e3fc31 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) @@ -30,4 +30,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 23042d0f23..4c69195362 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 @@ -32,4 +32,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index c0414898af..462e2b37bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 top_bottom_thickness = 1 wall_thickness = 1 @@ -28,4 +28,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 |