diff options
Diffstat (limited to 'resources/quality')
86 files changed, 365 insertions, 84 deletions
diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_draft.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_draft.inst.cfg new file mode 100644 index 0000000000..8059065638 --- /dev/null +++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_draft.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Draft +definition = elegoo_neptune_2 + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +weight = -2 +global_quality = True + +[values] +acceleration_enabled = True +jerk_enabled = True +layer_height = 0.28 +layer_height_0 = 0.28 + +bottom_layers = =999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4)) +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 10.0 +material_flow_layer_0 = 95 +retraction_amount = 6 +roofing_layer_count = 1 +skin_overlap = 15.0 +skirt_brim_speed = 25.0 +speed_layer_0 = 30.0 +speed_print = 60.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +top_bottom_thickness = =layer_height_0+layer_height*3 +top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4)) +travel_compensate_overlapping_walls_0_enabled = True +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_corner = z_seam_corner_weighted +z_seam_type = sharpest_corner
\ No newline at end of file diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_fine.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_fine.inst.cfg new file mode 100644 index 0000000000..ea2ed7694e --- /dev/null +++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine +definition = elegoo_neptune_2 + +[metadata] +setting_version = 20 +type = quality +quality_type = fine +weight = 1 +global_quality = True + +[values] +acceleration_enabled = True +jerk_enabled = True +layer_height = 0.12 +layer_height_0 = 0.2 +support_enable = False + +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 25 +material_flow_layer_0 = 95 +retraction_amount = 6 +skirt_brim_speed = 25.0 +speed_layer_0 = 25.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +top_bottom_thickness = 1 +travel_compensate_overlapping_walls_0_enabled = True +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_type = sharpest_corner
\ No newline at end of file diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg new file mode 100644 index 0000000000..c43de670d1 --- /dev/null +++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Normal +definition = elegoo_neptune_2 + +[metadata] +setting_version = 20 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +acceleration_enabled = True +adhesion_type = skirt +jerk_enabled = True +layer_height = 0.2 +layer_height_0 = 0.2 +support_enable = False + +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 25 +material_flow_layer_0 = 95 +retraction_amount = 6 +skin_angles = [90 ] +skin_line_width = =line_width +skin_monotonic = True +skin_outline_count = 0 +skin_overlap = 30.0 +skirt_brim_speed = 25.0 +speed_layer_0 = 25.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +support_xy_distance = 0.2 +top_bottom_thickness = 1 +travel_compensate_overlapping_walls_0_enabled = True +wall_0_inset = 0.2 +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_type = sharpest_corner diff --git a/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_draft.inst.cfg b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_draft.inst.cfg new file mode 100644 index 0000000000..16cb188d69 --- /dev/null +++ b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_draft.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Draft +definition = elegoo_neptune_2D + +[metadata] +setting_version = 20 +type = quality +quality_type = draft +weight = -2 +global_quality = True + +[values] +acceleration_enabled = True +jerk_enabled = True +layer_height = 0.28 +layer_height_0 = 0.28 + +bottom_layers = =999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4)) +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 10.0 +material_flow_layer_0 = 95 +retraction_amount = 6 +roofing_layer_count = 1 +skin_overlap = 15.0 +skirt_brim_speed = 25.0 +speed_layer_0 = 30.0 +speed_print = 60.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +top_bottom_thickness = =layer_height_0+layer_height*3 +top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4)) +travel_compensate_overlapping_walls_0_enabled = True +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_corner = z_seam_corner_weighted +z_seam_type = sharpest_corner
\ No newline at end of file diff --git a/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_fine.inst.cfg b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_fine.inst.cfg new file mode 100644 index 0000000000..790cc7aced --- /dev/null +++ b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_fine.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine +definition = elegoo_neptune_2D + +[metadata] +setting_version = 20 +type = quality +quality_type = fine +weight = 1 +global_quality = True + +[values] +acceleration_enabled = True +jerk_enabled = True +layer_height = 0.12 +layer_height_0 = 0.2 +support_enable = False + +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 25 +material_flow_layer_0 = 95 +retraction_amount = 6 +skirt_brim_speed = 25.0 +speed_layer_0 = 25.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +top_bottom_thickness = 1 +travel_compensate_overlapping_walls_0_enabled = True +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_type = sharpest_corner
\ No newline at end of file diff --git a/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_normal.inst.cfg b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_normal.inst.cfg new file mode 100644 index 0000000000..8b09145c1b --- /dev/null +++ b/resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_normal.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Normal +definition = elegoo_neptune_2D + +[metadata] +setting_version = 20 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +acceleration_enabled = True +adhesion_type = skirt +jerk_enabled = True +layer_height = 0.2 +layer_height_0 = 0.2 +support_enable = False + +coasting_enable = False +infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1)))) +infill_pattern = grid +infill_sparse_density = 25 +material_flow_layer_0 = 95 +retraction_amount = 6 +skin_angles = [90 ] +skin_line_width = =line_width +skin_monotonic = True +skin_outline_count = 0 +skin_overlap = 30.0 +skirt_brim_speed = 25.0 +speed_layer_0 = 25.0 +speed_travel_layer_0 = 125.0 +speed_wall_x = 50.0 +support_xy_distance = 0.2 +top_bottom_thickness = 1 +travel_compensate_overlapping_walls_0_enabled = True +wall_0_inset = 0.2 +wall_0_material_flow = 95 +wall_0_wipe_dist = 0.4 +wall_thickness = 1.2 +z_seam_type = sharpest_corner diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index 10d86c3a2f..516f24dec5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index 6bef64658f..ef7623fe0a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index 61ec5d977d..a19b438a9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 2b91c0c745..e5b88f2d77 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -34,8 +34,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index ff3e3c3e51..1c0ac78324 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -34,8 +34,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 6f5aa0168d..1e133a2148 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -33,8 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index e0d6001f47..4256f134cc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -33,8 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index e77195665a..aa1ba2ef27 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_overlap = 20 speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 8117c60edc..7c2ad43944 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index 85a05b576a..5b65d2351b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index b75ab359b4..20b668ca51 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 06fecc3abc..c82fb9c68d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 @@ -26,8 +28,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 -jerk_travel = 50 - infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index dd13a94e1b..f60adf89f3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 @@ -25,8 +27,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index fdd1bf57b4..6f230a94cd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 @@ -27,8 +29,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index c25c15c030..57fad8111c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,13 +18,13 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 3e61e38cb5..0ce09d5812 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 @@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed @@ -42,3 +40,4 @@ top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' raft_airgap = =0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 3851a06c59..a9e32a5283 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index 9c688e3995..3f08161091 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index f6885552ba..1046c70272 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index 09146132d0..48443ce029 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 680cf17e46..4bf6623cf6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 @@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed @@ -42,3 +40,4 @@ top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' raft_airgap = =0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg index 24845618c7..46f1985be1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 6718f911cc..b72c4565ad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -22,5 +22,5 @@ speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_infill = =math.ceil(speed_print * 33 / 45) -jerk_travel = 50
\ No newline at end of file + +speed_infill = =math.ceil(speed_print * 33 / 45)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg index f46afc8993..43d518be56 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 9e4cace003..ad9ef89a03 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,11 +16,12 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 663253cf7b..1f131578a9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 @@ -23,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) speed_infill = =math.ceil(speed_print * 33 / 45) -jerk_travel = 50 -cool_fan_speed = 20 +cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 27521b1da4..60c06b80ce 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,12 +16,13 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 layer_height_0 = 0.27 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index cf5af207e0..8d54246f13 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index b0b5c41bb0..f650f796bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 048a39bbcb..a9a14307f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index cfda526a6c..7551e2e39f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index ed64488c93..bc1b444d93 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 0bdda74982..4b6aa5629a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 46c7b4a45b..dc4858e463 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 6655f88e39..d2e23c81a9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -49,4 +49,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index c4444eb43d..3d4076c08c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index eb3820387e..f015b749d2 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index afc85cd4ed..88b079b388 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index c777af7195..8f6492f82d 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 432770e611..b8e45c49fb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index cb11ec1809..7a3b50c550 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index 6c82905859..d469288e35 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 37a15aa1ba..1e0b4c0044 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 8afe7e841f..9271ecc864 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -32,5 +32,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 29de3386d6..eb4ced65c1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -34,7 +34,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 053c129431..7ba60c0fd4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -33,7 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 0eff2bcf3c..e991199658 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -33,7 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 5b18b9c62d..78eda2718b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index f9a8aa8915..2a6b354674 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index 289521bd01..2925e5ca6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 8129f66fc3..7dbca8a664 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 42292a5786..a9e107d887 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 @@ -27,8 +29,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 -jerk_travel = 50 - infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b9d31e9196..408c65da04 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 @@ -25,7 +27,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index ca57e66b8e..e803a92538 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 @@ -27,7 +29,5 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 5053a62297..4653d1bdbb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,12 +18,12 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index ac348f3e70..5087857b86 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 @@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed @@ -42,3 +40,4 @@ top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' raft_airgap = =0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 53cc0ccc9c..e102ff7ac3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index f1370caaf0..a2e585117b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 8f1158bcbc..def68b8525 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 6f46c9c441..5a55438f0e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index af207733ef..d3637ca861 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 @@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed @@ -42,3 +40,4 @@ top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' raft_airgap = =0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg index c66f64eae5..f79c57f967 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index 577ae0e24b..3f9bec36ab 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -23,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) speed_infill = =math.ceil(speed_print * 33 / 45) -jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg index e3c995b644..d2ec9bdc00 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 53b84c3a4f..6e6b0a09a4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,11 +16,12 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index a8182573d5..5de1db358f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 @@ -23,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) speed_infill = =math.ceil(speed_print * 33 / 45) -jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 598b45268d..1f95f693e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,12 +16,13 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 5904532c52..4ad620367d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 8aadfa2352..7acfa04a29 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 0263adbe59..756316ed7f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 3b598808dd..7587ebf336 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index a5a64b28fe..b6cd8788b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index eff689b7fe..522cb974ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index a672798bd0..f6d8169fe8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 5b8b097a57..561acf9fbc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -48,4 +48,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 77c9e91886..fa432061bb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index f5d7301734..6a4115dd82 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 01929fe2cd..7392f4e6ee 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 21a3cbe449..053b9399a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index da60d4b054..9835e46e5d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 |