diff options
Diffstat (limited to 'resources/quality')
51 files changed, 0 insertions, 51 deletions
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 9cb123bc8b..70c01090d8 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -27,7 +27,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index edea497eaf..4173d7aece 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -27,7 +27,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index 784df58a42..73ed256bb5 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index 3a06e78e67..7ca62eda33 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 185e02dc9b..f8134eb46d 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 0.8 raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index 8ab4418dd7..00538dca9e 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 0.8 raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index ca22c85f57..89f062634d 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index 83718afced..a1f55d9ccf 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index 9f87519b35..30d3097310 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index 9a8dc8dcf2..6da24b8976 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index 5cf7ca92ec..55434090cf 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -26,7 +26,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index 7dc6ca7798..20d2217018 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -26,7 +26,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg index 8329c744b1..d031473bd6 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg index 44e09f8bf3..5629b7487a 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 31c4b395e0..25ef00bbe1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index 31deb2845b..3053a2a54e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg index ec06032c58..5b69b4c073 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg index 56e43111c2..418273a176 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg index 1ddf00a69d..601c6b1a23 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 0.8 raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg index 69a69d11c1..bd8185d47e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 0.8 raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 9fafa911d0..531ba4a582 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg index 11808eeacd..d42e8ad253 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg index a6e5bab579..37a0c580ca 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg @@ -23,7 +23,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg index bb454fa2c7..394a1ab486 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg @@ -23,7 +23,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg index 812683e8e1..30e63773d7 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg index 8319c833e2..c11a9ee0ed 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg @@ -25,7 +25,6 @@ raft_base_line_width = 1.2 raft_interface_line_spacing = 1.4 raft_interface_line_width = 1.2 raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg index 6a3f5eb8aa..3d6317ab9a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg @@ -24,7 +24,6 @@ raft_base_line_width = 1.6 raft_interface_line_spacing = 1.8 raft_interface_line_width = 1.6 raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index 71e0e5b248..d0c8c08491 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index 02ec623bd5..bf04650239 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 3e2dbdda98..3a2d2639be 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index 5fd0b51e33..7ad66e1071 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 669d5c496a..ed331819e3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 1386eb3907..8cd946d1c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 142be80d40..8a2671caac 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -23,7 +23,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index e36459156c..08b984e6f4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -23,7 +23,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index cdd4e2ad27..737aa12950 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 44834f4fa5..4b5d52851b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index e244d9cf17..8761a674d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 6e72969bf1..71627ee10b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 1bfac6bb3f..5ccf533e80 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 10e5270216..2be39b48d1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -24,7 +24,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index d7e8341110..63c545abf2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -24,7 +24,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 3cdd36abe0..f863d9abd8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -24,7 +24,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index d66a2fffb0..0ecff745c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 98e728baef..7cea344a31 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 7f23bb6698..97de66e3ee 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 4a7a782e96..f7a9a01c90 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 874c09f8db..657928ac0d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index 9f742a151d..2e66d666b5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index aafcc3adfb..92100d18da 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index b4beec6797..a48f7b8b6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -24,7 +24,6 @@ prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 |