diff options
Diffstat (limited to 'resources/quality')
241 files changed, 228 insertions, 639 deletions
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index 94a8136dbd..25841f3f1e 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -20,7 +20,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index 2ffdf91577..2bf0aea9f5 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -20,7 +20,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 017e5e29bd..85d5be2acb 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 -line_width = 0.57 + raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index 35e77d675a..e9b2983687 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 -line_width = 0.57 + raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 59611c8857..9a8c33f1ee 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index c1ae09474f..4e0e26b76f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 2b08b7607d..8de69298cc 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 955f0dac4d..c2aa1f68be 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 739bf3b04d..23931ba527 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index 118e4d0eba..9f8df82d07 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 4212f9d837..610d19b6bb 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed * 35 / 60 cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 -line_width = 0.57 raft_airgap = 0.24 raft_base_line_spacing = 1.2 raft_base_line_width = 0.6 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index 6d451a383c..f6aaae5840 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index 9ea6b60bba..b96f0aa10e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 16dc7d7c9c..ead1063349 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.57 raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index f6a05528d2..6b46e85906 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.57 raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index ba43d5bcec..df39f5c02c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 35ca780774..de16d949ea 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 95476b7670..65851adf80 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index ec65074c80..90ff15eab9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg index dad4ff5ba2..70f4044233 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index 535c2310db..6a4e5b609d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg index 103a0b23be..141ba84e6c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg @@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 -line_width = 0.57 raft_airgap = 0.24 raft_base_line_spacing = 1.2 raft_base_line_width = 0.6 diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index cbaaaac17b..1f5b7c74c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 43548ae864..066748c369 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -50,5 +49,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index 000e271b14..31d15a9ba6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -17,12 +17,11 @@ brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -53,5 +52,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index 7ceaff020c..9c72b7d858 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,8 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,6 +32,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index f3d45432c3..26eebe8b28 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index b7a112a228..8a51169cf7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index b3ee2c98b8..86fe20b481 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 8dd6278d5c..f85759369f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index f4be16949f..1d7318177e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 06eadd8ef6..99fbd8f1a1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index 85b28c5044..d8fa4f3c28 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 63780d2e67..b02c5dba6b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 3877cd9fbc..a292c2cca4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -59,5 +59,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index b9c8c4d224..f8d1c87f76 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -58,5 +58,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index a24eb1127b..4bb729fc4f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -59,5 +59,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index e97c40e61d..9e42621db6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -56,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 16859e4497..13f855385c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 937ef800cf..c5838af6a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index cedddc57d3..edc4a19f15 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 1f7ceeb3f6..091061b233 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 95de9768a6..38a1fa60f9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -17,14 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.2 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -58,5 +57,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index f576339a7e..e5d7a502f3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -17,14 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.15 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -58,5 +57,4 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 2ac4a3dcb9..60be6bd2e8 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -17,13 +17,12 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +56,4 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index b1bb3fb3c4..70cb2cc08f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index cf782bcb33..110bb95473 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,6 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) wall_thickness = 1.23 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index d702054971..380236a09a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 98745c8801..3d07077c9c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 @@ -25,7 +25,6 @@ infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.2 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,5 +57,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 7c2c01c13c..57eef897b5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 @@ -25,7 +25,6 @@ infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.15 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -59,5 +58,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 5b0211a743..aadcf96ce5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -17,14 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -56,5 +55,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg index 78da98eba5..d2985f56e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index d9c13de473..68d615559a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 30 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg index e523e70e09..ebabeb8b7e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 27 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index c1f5edfa46..18aee2af4d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height - -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -33,6 +31,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 8070aa5604..49bd4513f7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,9 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height - layer_height = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 4dd08b9b78..438e5b294a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -17,7 +17,6 @@ brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height layer_height = 0.3 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index 6bd1632658..5c4c7533f0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index 51e2d1210d..88216c6a50 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 15 layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index a598359638..7abba389a9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 15 layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 547cc0fa4a..31a9fae6f7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 612ff139f0..aff779c11c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - -infill_line_width = =line_width layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 @@ -29,7 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 5fbf5c06f3..342944b069 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - -infill_line_width = =line_width layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 @@ -29,8 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index a8a473566c..2c727d5d49 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height - -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +27,3 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 349cc6ffef..69fd0299f6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -17,7 +17,6 @@ brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -29,4 +28,3 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index 489a71ca73..b457d4f40b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -17,7 +17,6 @@ brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -30,4 +29,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg index 2757964881..8ddaf83b3e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index 2ee0af5a1b..525d12766a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg index 363038fe13..4a76fd24bc 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 37fd2bacf3..e00a21d571 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,9 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -33,10 +31,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 30bb84038a..bd38700ecf 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles layer_height = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,10 +33,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index e2341e376e..cccba67fd0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles layer_height = 0.3 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index b772b7450c..2c91aaa083 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 2a6a0286e8..bd8791fa98 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index e73b964e51..f509f33d70 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 752c5760b1..4a8c9c3f91 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -29,9 +27,6 @@ prime_tower_enable = False retract_at_layer_change = False speed_print = 45 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 403f54ae61..91344347da 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 30e2d750fa..dffdbf28a6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,11 +32,8 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 4f0f1df348..d09295a62f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -41,7 +39,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_travel = 300 @@ -49,7 +46,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -57,5 +53,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index eeac6e0063..56891da283 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -42,7 +40,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_travel = 300 @@ -50,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -58,5 +54,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 7a23352c58..a05a640e0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -41,7 +39,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_travel = 300 @@ -49,7 +46,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -57,5 +53,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index f4a41586b8..2f7677d850 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,6 +31,6 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 245f19fb7c..b19a7b9c7d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -49,5 +48,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 0d0fc4df75..a097d692dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -17,12 +17,11 @@ brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -52,5 +51,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index d50e151552..a03260d3e8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,9 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width + infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,7 +33,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index 43a456238a..6fd7afc364 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index a8a9a68d83..0f22b8977b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index 2e778e0ad9..3364e4720d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -24,7 +24,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index ec82e4de33..93f2e1a739 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 286e2da004..9e85a31e5e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index 70c710da88..a95e3ca53b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index 0c5d20e570..ef67add796 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index ab8735ca06..6f8cc41f26 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 69dc6993da..11274b2f0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index df6754b065..626d56d1b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index c09ee2a95a..c3b3e14dc4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index dc0c34c7b2..59eadf035b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 7a4894f065..adf6786e83 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 460672ac0f..5ae2735f2d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 77b5bc8ee4..5085510594 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -58,5 +58,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 77f1c1659f..68c9a1bbec 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -56,5 +56,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 5045b5b0ab..e12e733e3d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -28,7 +28,7 @@ top_bottom_thickness = 0.8 wall_thickness = 0.8 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 0cc2754a69..2c2a2b39a7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -27,7 +27,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 0d60d544a6..c5ea2e1400 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -29,7 +29,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index daa75b8dd0..9636a55c61 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -25,7 +25,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 20eb2c084b..6142412e33 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -17,13 +17,12 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -55,5 +54,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 1e2927b94a..e29f83ed8e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -17,13 +17,11 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +55,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 62d45c44ed..cd8db42a37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -17,13 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 39fe086b64..efd14ee639 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index 58c582e061..deffe82cd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 6b67046216..7512adc068 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -31,6 +31,3 @@ wall_thickness = 1.23 layer_height_0 = 0.2 -line_width = =round(machine_nozzle_size * 1.025, 3) -wall_line_width_x = =line_width -infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index ba051c3da0..0c9d86f51f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 585e77b07f..b985c97b11 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -56,5 +56,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 0edd73415c..03a7c8fae4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -56,6 +56,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 83cfa8b4f7..482fc42161 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -55,6 +55,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg index 8cae3917a2..83307b3989 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg index 4114848e22..597a7bb4fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg index 0680929256..0fee66e2e4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 22 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index 0dd0a53eb0..a3c1641407 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 1b1e52033b..340c20d968 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 3dd94709ee..d064920dcf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg index a1533ea905..3cb350975c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 246ef4cc63..91bce0f11b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg index d9259fdecc..0cf188093b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 9a98be3135..a0c3386e76 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =line_width + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 3f0b9e0e06..687e9f371f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =line_width + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 1f43d241d3..06c806d85b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =line_width + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index 6bdb14bdf5..f291ab075a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,3 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index c3af9333f1..313d31e1a3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -line_width = =machine_nozzle_size * 0.875 + material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -28,4 +28,3 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index b529b956ec..7bf8768c6d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 8f6026e176..4b66d6fdaf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index fab71760d3..7a2c5261e1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index cbb178b2dd..190f74524b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 9e1dff0827..30fd5c9eca 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 42d3a435c5..47e921703b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 95035c6996..e9f282c87e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index d7d5ff32bf..2a37bcb466 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 19bf973154..15c6de5603 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index a5c6902c9f..a035d08418 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -35,16 +35,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index a5eac8aaa8..26585acf60 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 52df4bed2c..32eb10ae89 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 11230abb5a..d92ee73bb1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 023851dded..a2752126a4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 - -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -39,15 +37,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,7 +50,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 82fa45fbd3..bff82d1c3b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -40,15 +40,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -56,6 +53,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index dfed86dfa0..7471e5031e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -39,15 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,6 +52,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg index 0778af5eeb..db9f7a118e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg index 0231e933f5..a4270f7c79 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg index c51fab4ee3..a675beb61e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg index a6e0bd1744..e9003721ec 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg index c77bdd9ebf..7f692d8a8c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg index 835d86ea59..26a2e6fae4 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg index 001959a334..4b63017464 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg index 7a055b6e29..58076ba6e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index be856977a8..ed376310c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index fe6a05e98a..69d0d5274b 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg index 2ee202a68a..07d37ef967 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg index 073d07dbef..969da49a51 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg index 3f1fd4c34e..bc65773a45 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg index 3d3e746d63..8ed2e7fb96 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index d993a5ae22..cb8264338f 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 008ecc21e3..3bde0b6e99 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index bddbc0a804..5d70a4654b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,4 +32,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 4d6e63f717..5b33819817 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width + infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -49,5 +49,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 665bcdb56e..d8b9738910 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -17,12 +17,12 @@ brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 + machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -52,5 +52,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 9f77222c38..cf07723ce3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,10 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width + infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 156684593d..92e4ca53ea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -25,8 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 8ec3cf7ff6..8b3af8702f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -24,8 +24,5 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 8c2274b4f9..4d92585cdb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -24,7 +24,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index 172e4fc147..5d575bfc75 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -23,6 +23,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index c434ca1ebe..db713524e3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 2b1f8dad32..7710a2372b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index cd034f531a..6313577880 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 1ba548fc58..8a757abeb5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 5a8dd34130..67f2fe4a45 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +31,5 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width - jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 76ffa690a3..b8ab1712e9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index ae67bb193b..702ccd8fcd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index fc62e4b299..89be14ed90 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index b962c495ac..85596210a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -57,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 39b6950cd4..7efa54f778 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index 813f8e47b9..efd031273b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -58,5 +58,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index f257b35f2e..327c2e81c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -56,5 +56,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 734501d7ae..19540fba2c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ top_bottom_thickness = 0.8 wall_thickness = 0.8 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index a8a8cfd35e..29ecfb903b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -27,6 +27,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 4009bfaad0..8abcd19440 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -29,6 +29,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 930ef3b7c7..b133cde125 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -25,6 +25,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 4135680fb3..666382da2b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -17,13 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -55,5 +55,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index c1b687c61a..f503800a2f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -17,13 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 7900ed2944..80f1d5c522 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -17,13 +17,13 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 7373f53e33..2dd354c591 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index 64a6a3f0a4..414002f41c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index a4241a45c0..c7eaaad188 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -28,9 +28,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 wall_thickness = 1.23 - layer_height_0 = 0.2 - -line_width = =round(machine_nozzle_size * 1.025, 3) -wall_line_width_x = =line_width -infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 1a2878fed2..94e5f21630 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 05b8d39dcd..9fb1c609a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -56,5 +56,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index e0836510d7..1877d2b85d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -56,6 +56,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 48227c0a1a..15956837e7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -17,14 +17,14 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -55,6 +55,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg index 0f4e96d747..5df2bcfb82 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 07ebd60b2c..ebd187fc1b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg index 95dc342945..b97ae609d3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 22 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 8ffd11928e..347ffd48ac 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -16,7 +16,6 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index abc87da36d..0e6600bad9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 5237ea6eab..7fe450be9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +34,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) + support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg index 8e31caaeb3..2d0ae892be 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index d3a77ad844..befcdb7b3a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg index 5fa91c4ae0..b7ab4be733 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index 4459b7079e..4b1705c084 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index d01339c2e8..02d87b8600 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index d951b5ecf0..a7180a4f9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =line_width + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index 53e1f3e8aa..a2ea24662b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,4 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 9c72305acb..539f732dfd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ is_experimental = True brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -line_width = =machine_nozzle_size * 0.875 + material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -28,4 +28,4 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index 109cb8b6c9..8a1eb6519b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height - -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +27,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 8b1a944e35..ad368149c8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index ab045702e2..ba091c8b17 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index f22772f612..59c97e5b76 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 472b9443ef..dad634521b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 2e567f9078..60964f7210 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 3f97a63acc..240a8108f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index fe77ed6928..7ed303a517 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,15 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 2397c882fb..28a67ff727 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -36,15 +36,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) + wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 8f4ca7e088..7feb2ffdda 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -35,15 +35,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) + wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 5b632ea5df..0b2e183947 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 5840a142b0..74b6765685 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index 9a800ad838..0d90fa543f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index b228d5453b..8feb40167c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = cross_3d jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -39,14 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -54,6 +52,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 07778d66f0..efa8ed52fd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -40,14 +40,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,6 +53,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index edf361e7e3..30aa50b2f0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + infill_pattern = cross_3d infill_sparse_density = 10 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) @@ -39,14 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -54,6 +52,6 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) + wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index 90123d5c39..9125145dae 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index b35838edf2..bfc159f656 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 80bd62f36a..503980d76e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index 5fc9661de9..9216994d0a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index 1b10f01a6a..fc07c21439 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index 7aedd8dbdb..b79484e54a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index 4d7a2ef685..8d6b4ee796 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index 023763dfd7..b95351cde0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index 3fb92b6f8b..abbcd3a747 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index c02df86438..06cfa6e6c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index 3a8c651fc0..2a69cd445c 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index 641e4b9a6d..d754d2e6a0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index e035ffcad0..fb68f5abc7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 70e4142e98..c32e8d446d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 0222afd01b..058aecc495 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index 5c8c1d2b53..b12afe0366 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x |