diff options
Diffstat (limited to 'resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini')
-rw-r--r-- | resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini | 299 |
1 files changed, 0 insertions, 299 deletions
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini deleted file mode 100644 index 42139fffc8..0000000000 --- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini +++ /dev/null @@ -1,299 +0,0 @@ -[profile] -layer_height = 0.325 -wall_thickness = 0.6 -retraction_enable = True -solid_layer_thickness = 0.65 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 0.6 -print_speed = 50 -print_temperature = 222 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 40 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100 -retraction_speed = 10 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.4 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 8 -infill_speed = 18 -solidarea_speed = 18 -inset0_speed = 12 -insetx_speed = 16 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 100 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S160 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S170 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S180 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - |