diff options
Diffstat (limited to 'resources')
87 files changed, 185 insertions, 47 deletions
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index cf3f66f496..56e1a7ab07 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -764,7 +764,7 @@ "label": "Scale Fan Speed To 0-1", "description": "Scale the fan speed to be between 0 and 1 instead of between 0 and 256.", "type": "bool", - "default_value": true, + "default_value": false, "settable_per_mesh": false, "settable_per_extruder": false, "settable_per_meshgroup": false @@ -2534,7 +2534,7 @@ "unit": "%", "type": "float", "default_value": 100.0, - "enabled": false, + "enabled": true, "minimum_value": "0.001", "minimum_value_warning": "100", "maximum_value_warning": "120", @@ -2550,7 +2550,7 @@ "unit": "%", "type": "float", "default_value": 100.0, - "enabled": false, + "enabled": true, "minimum_value": "0.001", "minimum_value_warning": "100", "maximum_value_warning": "120", @@ -2566,7 +2566,7 @@ "unit": "%", "type": "float", "default_value": 100.0, - "enabled": false, + "enabled": true, "minimum_value": "0.001", "minimum_value_warning": "100", "maximum_value_warning": "120", diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 2f69ad27a7..41593be8c2 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -60,13 +60,13 @@ "value": "'no_outer_surfaces'" }, "roofing_layer_count": { - "value": "1" + "value": "0" }, "roofing_material_flow": { "value": "material_flow" }, "skin_material_flow": { - "value": "0.95 * material_flow" + "value": "0.97 * material_flow" }, "skin_monotonic" : { "value": true @@ -81,7 +81,7 @@ "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" }, "xy_offset": { - "value": "-layer_height * 0.2" + "value": "-layer_height * 0.1" } } } diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index 3805e28d10..fd8e40e1a6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,5 +17,6 @@ material_print_temperature = =default_material_print_temperature + 30 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index ab93ceecfd..cfe6b1bf0a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -31,6 +31,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index 813521d10f..1cfd1a7132 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -19,5 +19,6 @@ material_standby_temperature = 100 prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 70dc30c606..d1785e2892 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,5 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index 2400196121..f8d6b4df20 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -19,7 +19,8 @@ material_standby_temperature = 100 prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) retraction_combing_max_distance = 8 retraction_combing = all diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index f53718287b..c2236f4e28 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,9 +29,10 @@ raft_margin = 10 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 70d4c22905..ff729395b9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 1908decfe0..53bf19e17b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index f18a4e23f5..a1cfef6d5f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 layer_height = 0.4 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -40,8 +40,9 @@ retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_travel = 300 -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 4709acfb58..388959da4a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 layer_height = 0.3 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index 10d86c3a2f..516f24dec5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index 6bef64658f..ef7623fe0a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index 61ec5d977d..a19b438a9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index e77195665a..aa1ba2ef27 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_overlap = 20 speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 8117c60edc..7c2ad43944 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index 85a05b576a..5b65d2351b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index b75ab359b4..20b668ca51 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 06fecc3abc..1c2322a89a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index dd13a94e1b..55d40e570c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index fdd1bf57b4..57e6a36b1e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index c25c15c030..0c1f8fdde9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,6 +18,8 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 718f1050b4..894d71da08 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 3851a06c59..a9e32a5283 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index 9c688e3995..3f08161091 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index f6885552ba..1046c70272 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index 09146132d0..48443ce029 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index f20c7b729a..84262cfdb5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg index 81b4ebac66..567f8b8c9f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 4692f15639..2a2ea30d89 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 02a34a4536..6718f911cc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -20,7 +20,7 @@ prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 4a268c97a3..ce043bc020 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,5 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 9e4cace003..1cf749a436 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 5c6144c024..4eb4c11298 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,12 +16,15 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 27521b1da4..157ec95d41 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 6873d6bc4d..8d54246f13 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 @@ -31,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 7fedec3c84..f650f796bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 @@ -29,8 +31,8 @@ top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 +speed_infill = =math.ceil(speed_print * 35 / 45) layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 9a8eceea8e..a9a14307f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 @@ -31,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 3d55189662..596f34d7b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index cfda526a6c..7551e2e39f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index ed64488c93..bc1b444d93 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 0bdda74982..4b6aa5629a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index a7b8e63380..6655f88e39 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -37,8 +37,9 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 470f043fa5..c4444eb43d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index eb3820387e..f015b749d2 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index afc85cd4ed..88b079b388 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index c777af7195..8f6492f82d 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 432770e611..b8e45c49fb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index cb11ec1809..7a3b50c550 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index 6c82905859..d469288e35 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 37a15aa1ba..1e0b4c0044 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 5b18b9c62d..78eda2718b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index f9a8aa8915..2a6b354674 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index 289521bd01..2925e5ca6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 8129f66fc3..7dbca8a664 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 42292a5786..d26fe8666b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b9d31e9196..e9b8596f9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index ca57e66b8e..124bd93167 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 5053a62297..1d617734b4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,6 +18,8 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index 17cc31bd8a..bc74eeb4cf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 53cc0ccc9c..e102ff7ac3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index f1370caaf0..a2e585117b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 8f1158bcbc..def68b8525 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 6f46c9c441..5a55438f0e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 3ebc15e8d6..33e4f52acd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 1337d0845e..88c5aee1a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 2785b662c0..7f3b35fa36 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index 45f59de1bd..577ae0e24b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -20,7 +20,7 @@ prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index d4dcfb6eb2..72be6682c6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,6 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 53b84c3a4f..6e181a16ff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index dbc320d383..058c5f2581 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,13 +16,15 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 598b45268d..10c05f49f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index b44d0ef5fb..4ad620367d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 @@ -31,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index b2cb8cff86..7acfa04a29 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 @@ -29,8 +31,8 @@ top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 +speed_infill = =math.ceil(speed_print * 35 / 45) layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index e574800962..756316ed7f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 @@ -31,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -infill_sparse_density = 15 layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 6c3c755d14..7026544931 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 3b598808dd..7587ebf336 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index a5a64b28fe..b6cd8788b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index eff689b7fe..522cb974ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index d3f07a54cf..5b8b097a57 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -36,8 +36,9 @@ retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 2edceb4c11..77c9e91886 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index f5d7301734..6a4115dd82 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 01929fe2cd..7392f4e6ee 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 21a3cbe449..053b9399a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index da60d4b054..9835e46e5d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index a4c8cd58bc..b5b1ab7b1a 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -117,6 +117,9 @@ material_bed_temperature material_bed_temperature_layer_0 material_adhesion_tendency material_surface_energy +material_shrinkage_percentage +material_shrinkage_percentage_xy +material_shrinkage_percentage_z material_flow wall_material_flow wall_0_material_flow @@ -134,6 +137,7 @@ material_flow_layer_0 material_standby_temperature material_alternate_walls + [speed] speed_print speed_infill |