diff options
Diffstat (limited to 'resources')
96 files changed, 82 insertions, 46 deletions
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg index 45f350cdbd..0ab179959f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg @@ -17,6 +17,8 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 @@ -26,5 +28,4 @@ wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) -speed_infill = =math.ceil(speed_print * 45 / 45) -retraction_combing_max_distance = 50 +speed_infill = =math.ceil(speed_print * 45 / 45)
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg index 3d0e9f6abd..dc4b06940c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg @@ -17,11 +17,12 @@ cool_min_layer_time = 2 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 15 infill_sparse_density = 20 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 wall_thickness = 1.05 speed_topbottom = =math.ceil(speed_print * 15 / 45) -speed_infill = =math.ceil(speed_print * 45 / 45) -retraction_combing_max_distance = 50 +speed_infill = =math.ceil(speed_print * 45 / 45)
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg index ab5559b322..2ea0c4a828 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg @@ -17,9 +17,10 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 -wall_thickness = 1.05 -retraction_combing_max_distance = 50 +wall_thickness = 1.05
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg index 286474454b..60642a3c69 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg @@ -17,8 +17,9 @@ cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 8 infill_sparse_density = 20 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 wall_thickness = 1.59 -retraction_combing_max_distance = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index d37743423b..fdaecf1142 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -26,6 +26,8 @@ raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.38 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) @@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 -retraction_combing_max_distance = 50
\ No newline at end of file +wall_thickness = 1.14
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index a0fd902e31..b9845f7002 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -26,6 +26,8 @@ raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.38 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 15 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) @@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 -retraction_combing_max_distance = 50
\ No newline at end of file +wall_thickness = 1.14
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index b96242f569..965182eb4d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -27,6 +27,8 @@ raft_interface_line_width = 1.2 raft_margin = 15 raft_surface_line_width = 0.57 raft_surface_thickness = 0.2 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) @@ -41,5 +43,4 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 -retraction_combing_max_distance = 50
\ No newline at end of file +wall_thickness = 1.14
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index 58e7974fe6..817635d4fd 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -27,6 +27,8 @@ raft_interface_line_width = 1.2 raft_margin = 15 raft_surface_line_width = 0.57 raft_surface_thickness = 0.2 +retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) @@ -41,5 +43,4 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 -retraction_combing_max_distance = 50
\ No newline at end of file +wall_thickness = 1.14
\ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg index b9074df494..2358657ab3 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg @@ -26,6 +26,7 @@ raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.5 raft_surface_thickness = 0.15 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg index 1986a09fc7..5a9283faff 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg @@ -26,6 +26,7 @@ raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.5 raft_surface_thickness = 0.15 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 78cf8fd15d..18fe82d680 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -27,6 +27,7 @@ raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg index 1b38f220e2..8685edd405 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg @@ -27,6 +27,7 @@ raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg index c03d3ca7c3..94562f422d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg index a267ce002a..43a5cb6596 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg index 3a44812078..c7c7753cf2 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg index f85c61b885..2b3c24a912 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg index 4f77e995d4..8f3079c4f4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg @@ -15,6 +15,7 @@ variant = 0.6 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index 077ce01713..a7dad05ae9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -45,7 +45,6 @@ retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 -retraction_prime_speed = 15 skin_overlap = 10 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 9e827e0da6..6f9612ff9a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -45,7 +45,6 @@ retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 -retraction_prime_speed = 15 skin_overlap = 10 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index afc75d1238..7c94a57190 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -44,7 +44,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_prime_speed = 15 skin_overlap = 10 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index 52b963bb90..6e2a8960bd 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -44,7 +44,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_prime_speed = 15 skin_overlap = 10 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg index ab146869d9..4161bd3781 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg index a985f0c797..b26340fdb2 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg index 7da9e7165c..a4ee94c36c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg @@ -15,6 +15,7 @@ variant = 0.4 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 20 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg index 1fd07a8c85..173b551e8b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg @@ -15,6 +15,7 @@ variant = 0.6 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 +retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg index 08a82f1d5d..f3cc0937a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -15,6 +15,5 @@ variant = AA 0.25 cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 -retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 47119e62bf..59423682f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -34,7 +34,6 @@ retraction_count_max = 80 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index e426ee3efd..2f6c5f2888 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 13 +retraction_prime_speed = 15 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index d0e6e36ea3..1aad4c498f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index 51f90c6c8f..1172267ed4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index e5241c36c6..19b5094f03 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -34,6 +34,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index 155001b888..a282ca7222 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -34,6 +34,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 1a6ae612ce..7c42d02ada 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg index f0b55841f3..c5641afd64 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg index fdbe5fb1d6..a6ee66b17e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg index 9bffd6f794..e888cf8ae0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 5bc7246093..5fb23190d1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 614254e9d9..a46e184d05 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 3a11b6dbe3..50d885b55f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index a5abd1bab6..84aebaf798 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 69bbcf001d..f4bb4ba024 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 63568363d2..ece85f2168 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 3a317c820e..0caf9b1cd6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 8b264ad751..751942b0f9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 7ca3b04031..d5a5be70f8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 38741f40ff..d274eaffd3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_print = 70 speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 871ab6adc8..2f54d272fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 7c8b71cd68..2c23a4ae71 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 1f005ff77a..362d9ef5b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 816eaeda5d..b59e2537e3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -42,7 +42,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 498bdd6bd5..3b3ff5b463 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 28b1470419..2530ca9490 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 2201b135b1..a3d1d1f255 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index b97bdbece7..cb2d019fdc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 262a1593a3..32ae7fbd53 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 45 speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index c438fd2a93..a81a3b9f08 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index f00bf89dc6..bda8ad2775 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 0a01d45a0c..8b0b8abf0c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 18c5c014f8..0f4a416273 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 536f766916..2b0b1c1720 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg index efacf651ab..c1d936a7a7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg @@ -15,6 +15,5 @@ variant = AA 0.25 cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 -retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index ee3750680f..2b6121e9ee 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -34,7 +34,6 @@ retraction_count_max = 80 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 07aa9462e1..9870b07ab4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 13 +retraction_prime_speed = 15 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index f6927953d1..26dc7ea9c3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index ffb22e619d..4b3fcd3fd9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index 262e6583a2..6fc1c398c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -34,6 +34,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index a11519fb05..4f7901cd52 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -33,6 +33,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 6c1a3a45af..3f3ce3ce79 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index 71c25958fa..cbabc4d432 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index 9692faac22..86c81a14a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index 5698375c63..62163c286e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 9a02eeede4..58d05433c0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -26,6 +26,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 01859d49a1..26a74aae03 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index c25a46ce20..8a6d7bdca2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 321c369975..4976153044 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 2fdc113b3c..601d1164fd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -42,7 +42,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 9adceaa9cd..cad4e25f95 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index 65364d955a..6cc4d15e73 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index e6adcfaf22..093a04b8a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index fcc7ce6278..f339aa3988 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index 27df25d5d5..206442121b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_print = 70 speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 9df48afa7b..3f29983cfd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index b3d096ed71..227730f359 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index 376cebd718..141c4604b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 3acfe41222..8c8091cb1e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 4f7e5c5860..047ee82739 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index b2b03b494d..c91c73983e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index ef698a68e6..d65f61cf74 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index e66b376515..bea0ca9228 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index cb9e545007..190f2f8e06 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 45 speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 405fd35825..190f3422b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index bd3193df37..9e614cdd28 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 30eb73204b..a867e168b1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index b63ecbdad8..f4ef171a69 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index ff25dd69a9..ce9b26051e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index a400721d90..99511e1ab6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -34,7 +34,6 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) |