diff options
Diffstat (limited to 'resources')
61 files changed, 122 insertions, 3 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index 10d86c3a2f..516f24dec5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index 6bef64658f..ef7623fe0a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index 61ec5d977d..a19b438a9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index e77195665a..aa1ba2ef27 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_overlap = 20 speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 8117c60edc..7c2ad43944 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index 85a05b576a..5b65d2351b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index b75ab359b4..20b668ca51 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 06fecc3abc..1c2322a89a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index dd13a94e1b..55d40e570c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index fdd1bf57b4..57e6a36b1e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index c25c15c030..0c1f8fdde9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,6 +18,8 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 3e61e38cb5..22555472df 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 3851a06c59..a9e32a5283 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index 9c688e3995..3f08161091 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index f6885552ba..1046c70272 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index 09146132d0..48443ce029 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 680cf17e46..28d1483ea5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 9e4cace003..1cf749a436 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 663253cf7b..4eb4c11298 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 27521b1da4..157ec95d41 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index cf5af207e0..8d54246f13 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index b0b5c41bb0..f650f796bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 048a39bbcb..a9a14307f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index cfda526a6c..7551e2e39f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index ed64488c93..bc1b444d93 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 0bdda74982..4b6aa5629a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index eb3820387e..f015b749d2 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index afc85cd4ed..88b079b388 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index c777af7195..8f6492f82d 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 432770e611..b8e45c49fb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index cb11ec1809..7a3b50c550 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file +material_print_temperature = =default_material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index 6c82905859..d469288e35 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = 190 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 retraction_hop = 0.2 skin_overlap = 5 speed_layer_0 = =speed_print diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 37a15aa1ba..1e0b4c0044 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 5b18b9c62d..78eda2718b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.4 material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index f9a8aa8915..2a6b354674 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -16,6 +16,8 @@ cool_min_speed = 7 material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index 289521bd01..2925e5ca6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 8129f66fc3..7dbca8a664 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 retraction_combing_max_distance = 8 speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 42292a5786..d26fe8666b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b9d31e9196..e9b8596f9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index ca57e66b8e..124bd93167 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 5053a62297..1d617734b4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,6 +18,8 @@ cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index ac348f3e70..780761d88f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 53cc0ccc9c..e102ff7ac3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index f1370caaf0..a2e585117b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 8f1158bcbc..def68b8525 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 6f46c9c441..5a55438f0e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index af207733ef..bc542246ca 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -32,6 +32,8 @@ material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 53b84c3a4f..6e181a16ff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index a8182573d5..058c5f2581 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 598b45268d..10c05f49f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -16,6 +16,8 @@ brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.5 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 5904532c52..4ad620367d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 8aadfa2352..7acfa04a29 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True raft_margin = 10 support_angle = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 0263adbe59..756316ed7f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 3b598808dd..7587ebf336 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 0 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index a5a64b28fe..b6cd8788b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False raft_margin = 10 retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index eff689b7fe..522cb974ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.3 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = False retract_at_layer_change = False speed_infill = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index f5d7301734..6a4115dd82 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 01929fe2cd..7392f4e6ee 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 21a3cbe449..053b9399a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index da60d4b054..9835e46e5d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 +material_shrinkage_percentage_xy = 100.2 +material_shrinkage_percentage_z = 100.1 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 diff --git a/resources/setting_visibility/advanced.cfg b/resources/setting_visibility/advanced.cfg index 53db1fc062..768dad20a5 100644 --- a/resources/setting_visibility/advanced.cfg +++ b/resources/setting_visibility/advanced.cfg @@ -57,7 +57,6 @@ retract_at_layer_change retraction_amount retraction_speed material_standby_temperature -material_shrinkage_percentage [speed] speed_print |