diff options
Diffstat (limited to 'resources')
24 files changed, 45 insertions, 25 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index 344c8ec47b..e396856b76 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,5 +17,6 @@ material_print_temperature = =default_material_print_temperature + 30 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 633f48893d..22934d8e1c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -31,6 +31,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index d9bbacf909..5ff5caa662 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -19,5 +19,6 @@ material_standby_temperature = 100 prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 81c4bb3394..894c58e154 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,5 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index a7a1593a29..58de81f8b9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -19,7 +19,8 @@ material_standby_temperature = 100 prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) retraction_combing_max_distance = 8 retraction_combing = all diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 708ddd4ff5..611513d8ba 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,9 +29,10 @@ raft_margin = 10 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 8981a40303..0281f813c7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 90d9cbeff7..fe9fab6e55 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -40,8 +40,9 @@ retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_travel = 300 -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg index 78593302e3..59df82fb37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index edac440f9a..5c6bc43aca 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 0062aa89f8..dd30b14c7b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -20,7 +20,7 @@ prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 4100787241..83cb84e6cc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,5 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 8940e53e23..d670433f17 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -20,8 +20,9 @@ prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 4c5a6bcc0f..096dbbee78 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,7 +29,8 @@ top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 690ae20b68..b1fa6f4e07 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index fe1365891e..d50eb3c3ad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -37,8 +37,9 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 96b7e79ad5..12b8cb993d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index d31ca4ffbe..89ea586ff0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -33,6 +33,7 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index 07e19b9ca3..929557b076 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -20,7 +20,7 @@ prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 1ee17fd498..f13d0b015f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -26,6 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index 855a5ae292..0725dbd57b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -20,9 +20,9 @@ prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 6ea13295ba..f8c3ec8a15 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,7 +29,8 @@ top_bottom_thickness = =layer_height * 4 retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall = =math.ceil(speed_print * 35 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 067033d1c3..a770f71fe6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 4092a930d3..896104d61a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -36,8 +36,9 @@ retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_wall = =math.ceil(speed_print * 30 / 30) -speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_wall = =speed_print +speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width |