Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/Ultimaker/Cura.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
path: root/resources
diff options
context:
space:
mode:
Diffstat (limited to 'resources')
-rw-r--r--resources/definitions/tronxy_d01.def.json10
-rw-r--r--resources/definitions/tronxy_x5sa.def.json10
-rw-r--r--resources/definitions/tronxy_x5sa_400.def.json15
-rw-r--r--resources/definitions/tronxy_x5sa_500.def.json13
-rw-r--r--resources/definitions/tronxy_xy2.def.json16
-rw-r--r--resources/definitions/tronxy_xy2pro.def.json23
-rw-r--r--resources/definitions/tronxy_xy3.def.json18
7 files changed, 32 insertions, 73 deletions
diff --git a/resources/definitions/tronxy_d01.def.json b/resources/definitions/tronxy_d01.def.json
index ff8badd355..141414f85f 100644
--- a/resources/definitions/tronxy_d01.def.json
+++ b/resources/definitions/tronxy_d01.def.json
@@ -5,7 +5,6 @@
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -23,15 +22,8 @@
"gantry_height": { "value": 30 },
"machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y220.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y220.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" },
+ "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
- "machine_max_feedrate_x": { "value": 150 },
- "machine_max_feedrate_y": { "value": 150 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 },
- "machine_max_acceleration_x": { "value": 150 },
- "machine_max_acceleration_y": { "value": 150 },
- "machine_max_acceleration_z": { "value": 150 },
- "machine_max_acceleration_e": { "value": 150 },
"machine_acceleration": { "value": 120 }
}
}
diff --git a/resources/definitions/tronxy_x5sa.def.json b/resources/definitions/tronxy_x5sa.def.json
index 0e70dd72b4..a4ca9a510a 100644
--- a/resources/definitions/tronxy_x5sa.def.json
+++ b/resources/definitions/tronxy_x5sa.def.json
@@ -1,11 +1,10 @@
{
- "name": "Tronxy X5SA/X5ST/Pro",
+ "name": "Tronxy X5SA/X5ST/Pro/2E/D01 Plus",
"version": 2,
"inherits": "tronxy_x",
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,8 +20,11 @@
]
},
"gantry_height": { "value": 40 },
+ "retraction_amount": { "value": 4.5 },
- "machine_start_gcode": { "default_value": "; X5SA Pro Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
- "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y0\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" }
+ "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
+
+ "machine_acceleration": { "value": 150 }
}
}
diff --git a/resources/definitions/tronxy_x5sa_400.def.json b/resources/definitions/tronxy_x5sa_400.def.json
index 5604b17619..d1448a3287 100644
--- a/resources/definitions/tronxy_x5sa_400.def.json
+++ b/resources/definitions/tronxy_x5sa_400.def.json
@@ -1,11 +1,10 @@
{
- "name": "Tronxy X5SA/X5ST/Pro 400",
+ "name": "Tronxy X5SA/X5ST/Pro/2E 400mm",
"version": 2,
"inherits": "tronxy_x",
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,13 +20,11 @@
]
},
"gantry_height": { "value": 40 },
+ "retraction_amount": { "value": 6.5 },
- "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y370.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y370.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish"},
- "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" },
+ "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
- "machine_max_feedrate_x": { "value": 100 },
- "machine_max_feedrate_y": { "value": 100 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 }
+ "machine_acceleration": { "value": 150 }
}
-}
+} \ No newline at end of file
diff --git a/resources/definitions/tronxy_x5sa_500.def.json b/resources/definitions/tronxy_x5sa_500.def.json
index b68a954115..44f8d1ba1a 100644
--- a/resources/definitions/tronxy_x5sa_500.def.json
+++ b/resources/definitions/tronxy_x5sa_500.def.json
@@ -1,11 +1,10 @@
{
- "name": "Tronxy X5SA/X5ST/Pro 500",
+ "name": "Tronxy X5SA/X5ST/Pro/2E 500mm",
"version": 2,
"inherits": "tronxy_x",
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,13 +20,11 @@
]
},
"gantry_height": { "value": 40 },
+ "retraction_amount": { "value": 6.5 },
- "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n "},
- "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" },
+ "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
- "machine_max_feedrate_x": { "value": 150 },
- "machine_max_feedrate_y": { "value": 150 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 }
+ "machine_acceleration": { "value": 150 }
}
}
diff --git a/resources/definitions/tronxy_xy2.def.json b/resources/definitions/tronxy_xy2.def.json
index eaae1dbb08..ce7966fc3b 100644
--- a/resources/definitions/tronxy_xy2.def.json
+++ b/resources/definitions/tronxy_xy2.def.json
@@ -5,7 +5,6 @@
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,18 +20,11 @@
]
},
"gantry_height": { "value": 40 },
+ "retraction_amount": { "value": 4.5 },
- "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
- "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0 ;Turn-off fan\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+ "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
- "machine_max_feedrate_x": { "value": 100 },
- "machine_max_feedrate_y": { "value": 100 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 },
- "machine_max_acceleration_x": { "value": 150 },
- "machine_max_acceleration_y": { "value": 150 },
- "machine_max_acceleration_z": { "value": 150 },
- "machine_max_acceleration_e": { "value": 150 },
- "machine_acceleration": { "value": 80 }
+ "machine_acceleration": { "value": 150 }
}
}
diff --git a/resources/definitions/tronxy_xy2pro.def.json b/resources/definitions/tronxy_xy2pro.def.json
index 59e727bbb0..fb2bd70ea3 100644
--- a/resources/definitions/tronxy_xy2pro.def.json
+++ b/resources/definitions/tronxy_xy2pro.def.json
@@ -1,11 +1,10 @@
{
- "name": "Tronxy XY-2 Pro",
+ "name": "Tronxy XY-2 Pro/Pro 2E/XY3 SE",
"version": 2,
"inherits": "tronxy_x",
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,23 +20,11 @@
]
},
"gantry_height": { "value": 40 },
+ "retraction_amount": { "value": 4.5 },
- "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
- "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+ "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
- "machine_max_feedrate_x": { "value": 100 },
- "machine_max_feedrate_y": { "value": 100 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 },
-
- "machine_max_acceleration_x": { "value": 120 },
- "machine_max_acceleration_y": { "value": 120 },
- "machine_max_acceleration_z": { "value": 120 },
- "machine_max_acceleration_e": { "value": 120 },
- "machine_acceleration": { "value": 150 },
-
- "machine_max_jerk_xy": { "value": 20 },
- "machine_max_jerk_z": { "value": 0.4 },
- "machine_max_jerk_e": { "value": 5 }
+ "machine_acceleration": { "value": 150 }
}
}
diff --git a/resources/definitions/tronxy_xy3.def.json b/resources/definitions/tronxy_xy3.def.json
index db03c344f5..941ca7142f 100644
--- a/resources/definitions/tronxy_xy3.def.json
+++ b/resources/definitions/tronxy_xy3.def.json
@@ -1,11 +1,10 @@
{
- "name": "Tronxy XY-3",
+ "name": "Tronxy XY-3/Pro",
"version": 2,
"inherits": "tronxy_x",
"metadata": {
"quality_definition": "tronxy_x",
"visible": true,
- "author": "AdderMk2",
"platform": "tronxy.stl"
},
"overrides": {
@@ -21,18 +20,11 @@
]
},
"gantry_height": { "value": 30 },
+ "retraction_amount": { "value": 5 },
- "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
- "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+ "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+ "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
- "machine_max_feedrate_x": { "value": 100 },
- "machine_max_feedrate_y": { "value": 100 },
- "machine_max_feedrate_z": { "value": 20 },
- "machine_max_feedrate_e": { "value": 120 },
- "machine_max_acceleration_x": { "value": 150 },
- "machine_max_acceleration_y": { "value": 150 },
- "machine_max_acceleration_z": { "value": 150 },
- "machine_max_acceleration_e": { "value": 150 },
- "machine_acceleration": { "value": 80 }
+ "machine_acceleration": { "value": 150 }
}
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-31 08:49:46 +0300