Age | Commit message (Collapse) | Author |
|
After https://github.com/Ultimaker/Cura/pull/8684 raft_airgap and speed_layer_0 existed twice in some of the quality profiles.
This commit fixes that by removing the old (calculated) values.
|
|
Sets max speed to 100% for small layers as the stock fan is not very strong.
|
|
Makes Anycubic i3 Mega use bed and print temperature from material.
|
|
|
|
This is the new printer from Ultimaker.
|
|
|
|
Create zav_abs_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
New ZAV intent files
Create zav_petg_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
New ZAV PEtG
Create zav_pla_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
New ZAV Pla files
New material Bestfilament
New FDPlast and Bestfilament materials
ZAV platforms
New ZAV variants
Create zav_layer_0.05.inst.cfg
New ZAV quality files
New ZAV material qualty
Update zav_l_0.60.inst.cfg
Update zav_l_0.80.inst.cfg
Update zav_l_0.50.inst.cfg
Update zav_base.def.json
Update zav_big.def.json
Update zav_bigplus.def.json
Update zav_l.def.json
Update zav_max.def.json
Update zav_maxpro.def.json
Update zav_mini.def.json
Update zav_extruder_2.def.json
Update zav_abs_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
Update zav_abs_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
Update zav_mini_1.00.inst.cfg
Update zav_mini_0.80.inst.cfg
Update zav_mini_0.60.inst.cfg
Update zav_mini_0.50.inst.cfg
Update zav_mini_0.45.inst.cfg
Update zav_mini_0.40.inst.cfg
Update zav_mini_0.35.inst.cfg
Update zav_mini_0.30.inst.cfg
Update zav_mini_0.25.inst.cfg
Update zav_mini_0.20.inst.cfg
Update zav_maxpro_1.00.inst.cfg
Update zav_mini_0.20.inst.cfg
<1mb new ZAV platfoms
Delete ZAV.png
Add files via upload
Update zav_base.def.json
Update zav_big.def.json
Update zav_bigplus.def.json
Update ZAV
Add files via upload
Add files via upload
Add files via upload
Add files via upload
Update zav_big.def.json
Update zav_big.def.json
Update zav_bigplus.def.json
Update zav_big.def.json
Update zav_l.def.json
Update zav_max.def.json
Update zav_maxpro.def.json
Update zav_mini.def.json
Update zav_layer_0.15.inst.cfg
Update zav_layer_0.15.inst.cfg
Update zav_layer_0.15.inst.cfg
Update zav_layer_0.15.inst.cfg
Add files via upload
Add files via upload
Add files via upload
Add files via upload
Update zav_extruder_1.def.json
Update zav_extruder_2.def.json
Update zav_base.def.json
Update zav_extruder_1.def.json
Update zav_extruder_2.def.json
Update zav_maxpro.def.json
Update zav_bigplus.def.json
Update zav_mini.def.json
Update zav_big.def.json
Update zav_bigplus.def.json
Update zav_max.def.json
Update zav_maxpro.def.json
delete materials
Delete bestfilament_abs_skyblue.xml.fdm_material
Delete bestfilament_petg_orange.xml.fdm_material
Delete bestfilament_pla_green.xml.fdm_material
|
|
Settings modified depending on the raft release experiemnets done for PLA, Nylon and ABS for AA0.4 print core for UMS3 and UMS5.
|
|
|
|
Added Liquid 3D printer configurations
|
|
|
|
Create koonovo_elf.def.json
Create koonovo_pyramid.def.json
Create koonovo_base_extruder_1.def.json
Add files via upload
Add files via upload
Add files via upload
Update koonovo_base.def.json
Delete base_global_draft.inst.cfg
Delete base_global_high.inst.cfg
Delete base_global_standard.inst.cfg
Add files via upload
Update koonovo_base.def.json
Update koonovo_elf.def.json
delete extruder1
Update koonovo_pyramid.def.json
delete extruder1
Delete koonovo.png
Add files via upload
Update koonovo_base.def.json
change first_start_actions
Rename base_global_draft.inst.cfg to koonovo_base_global_draft.inst.cfg
Rename base_global_high.inst.cfg to koovono_base_global_high.inst.cfg
Rename base_global_standard.inst.cfg to koonovo_base_global_standard.inst.cfg
Update koonovo_base.def.json
"first_start_actions": [ "DiscoverUM3Action" ] change "first_start_actions": [ "MachineSettingsAction" ],
Update koonovo_base.def.json
change retraction_speed
Create koonovo_d3.def.json
This is an independent double X axis, double extrusion machine
Add files via upload
This is an independent double X axis, double extrusion machine
Add files via upload
This is an independent double X axis, double extrusion machine
Delete koonovo_d3.def.json
Add files via upload
Delete koonovo_d3_extruder_0.def.json
Delete koonovo_d3_extruder_1.def.json
Add files via upload
Delete koonovo_d3.stl
Add files via upload
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_kn3.def.json
Update koonovo_base.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_base.def.json
Update and rename koonovo_base_extruder_1.def.json to koonovo_base_extruder_0.def.json
Update koonovo_base.def.json
Update koonovo_kn3.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Add files via upload
Add files via upload
Add files via upload
|
|
More details for the printer can be found at https://liquid3d.site
|
|
|
|
|
|
* Added the configuration files for the Artillery Printers
Added the configuration files for the Artillery Printers
* Changed version file
* Updated versions, removed machine_head_polygon
* fixed version in some files
* Added generic PLA,PETG,ABS,TPU
* Update resources/definitions/artillery_base.def.json
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* Update resources/definitions/artillery_base.def.json
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* 1st batch of update
* Apply suggestions from code review
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* 2nd batch of changes
* Update resources/quality/artillery/PETG/artillery_0.2_PETG_super.inst.cfg
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* Update resources/quality/artillery/PETG/artillery_0.2_PETG_ultra.inst.cfg
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* Update resources/quality/artillery/PETG/artillery_0.3_PETG_low.inst.cfg
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
* Update resources/quality/artillery/PETG/artillery_0.3_PETG_adaptive.inst.cfg
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
|
|
These IDs were the same as the Creality profiles. As a result, only one profile could load into Cura of the two duplicates. In this case it chose Biqu's profile, and the Creality profiles wouldn't load as a result.
Contributes to issue CURA-7752.
|
|
This is the default (preferred) nozzle for the FABtotum Personal Fabricator.
Apparently when these nozzle profiles were added, the existing quality profiles weren't considered. We'll now put them on the nozzle size that the FABtotum printer had before the nozzle profiles were added. There is also the Pro nozzle for FABtotum but I think the Lite is more likely what the profiles were originally made for, since that is the default.
|
|
Normally we'd require contributors to submit up-to-date profiles but in this case they did, we were just slow to respond.
Contributes to issue CURA-7757.
|
|
eMotion-Tech-master
|
|
* Added BIQU machine base files as well as BIQU B1 machine files.
* Fixed a variants settings version error.
* Updated base def by removing excluded materials and changing the pref to pla175
* Fixed the machine name value which should only take a default value and not also a value.
* Increased the max extruder feedrate to allow the default retraction speed.
* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.
* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.
* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8
* Final tweaks to B1 start gcode
* Added an ABL version of the B1 with tweaked start codes.
|
|
* Add files via upload
* Add files via upload
* Add files via upload
* Update fusedform_300_draft_abs.inst.cfg
* Add files via upload
* Delete fusedform_300_draft_abs.inst.cfg
* Delete fusedform_300_draft_pla.inst.cfg
* Deletion of old files
* changes in STD quality profiles
* Changes in mini quality files
* Changes in FF600 quality files
* changes in machine definition name
* Changes in definition files
* extruder and definition linking
* ff300 inherits and extruder def
* Update fusedform_300.def.json
* category deprecation in definitions
* inherits
* ff300 extruder definition machine
* extruder machine definitions
* Fused form FF600plus machine profiles
* PETG profiles
* Update fusedform_300.def.json
* changes in start gcode
* machine configuration dynamics on definitions
* speed adjustments
* dynamics modification in petg and flex quality
* Further adjustments on dynamics definitiosn
* Modification of all files under inherits data structure.
* Quality setting version 15 to 16
* These changes are for limiting quality types in the materials defined
* Quality Modification under Global and Material specific structure
Global quality structures and material specific definitions under the global structures
|
|
|
|
|
|
A printer was added in the meantime that had setting_version = 15, which was leading to failing
tests, considering that this PR has changed the setting version to 16.
CURA-7118
|
|
|
|
We have a change now that requires a version upgrade. This triggers all profiles to update for the user, and we must update accordingly in the built-in profiles.
Contributes to issue CURA-7118.
|
|
|
|
|
|
|
|
|
|
|
|
Merge remote-tracking branch 'upstream/master'
|
|
|
|
CURA-7619
|
|
* Added Definitions for all SVT FDM printers
CURA-7619
|
|
Unsure whether this is necessary, but we decided to do this to make
the evaluation logically equivalent to the existing code currently
in master.
CURA-6711
|
|
CURA-6711
|
|
|
|
|
|
|
|
|
|
CPE+ must have combing mode set to 'all' now.
Contributes to issue CURA-7535.
|
|
|
|
|
|
|
|
|
|
|
|
These were apparently outdated.
Contributes to issue CURA-7515.
|
|
It's useful if they are together. The folder name is now more in line with the rest, too.
|