Age | Commit message (Collapse) | Author |
|
We're currently translating for Cura 4.13, not 4.12.
Contributes to issue CURA-8753.
|
|
CURA-8753
|
|
CURA-8753
|
|
Ultimaker/PP-86-Avoid-overextrusion-for-100%-density
reduce flow for 100% density parts
|
|
|
|
Our FastConfigParser doesn't deal with these safely. It's best to disallow comments altogether. They affect the line afterwards.
Contributes to issue CURA-8746.
|
|
|
|
This needs to be enabled after the bug causing travels is fixed. (PP-86)
|
|
Relates to PP-50
|
|
Relates to PP-50
|
|
|
|
Relates to PP-50
|
|
Relates to PP-50
|
|
Relates to PP-50
|
|
This also includes a faster Draft intent profile for the 0.3mm layer height.
Relates to PP-50
|
|
Which support pattern you're using has no bearing whatsoever on the gradual infill steps. Gradual support steps, maybe, but not gradual infill steps.
|
|
Overextrusion needs to be avoided to main high quality. More info: PP-86
|
|
[CURA-8671] Don't send materials to printers that can't receive them
|
|
Because the issue could also be that their firmware is outdated and doesn't yet support syncing material.
Contributes to issue CURA-8671.
|
|
Contributes to issue CURA-8671.
|
|
This is more in line with what you see, so you can click on the icon properly to open the per-object settings panel. And the text gets properly elided where the icon starts.
|
|
And an example of such usage: In the material sync via cloud we only want to sync with printers that can receive those materials.
We might want to add a message for the user to also make sure the firmware is up to date. Because if the firmware is not up to date now it will show no printers and instruct the user how to connect the printer to the cloud.
Contributes to issue CURA-8671.
|
|
|
|
Add Czech translations for v4.12.1
|
|
Ultimaker/PP-25_close-to-100%-density-infill-behaviour
PP-25 close to 100% density infill behaviour
|
|
|
|
We changed tree support to have a correct top distance now. If you ask for 0 top distance, you get 0 top distance. If you ask for 0.2mm top distance, you get 0.2mm top distance (rounded to layers). Previously the top distance was too high. Yet it seems that people were happy with how easily Tree Support was removed from the print. So this is a best-effort attempt to keep the final result similar to what it was originally.
It won't work for everything, I fear. But it's about as good as we can make it.
Contributes to issue CURA-7624.
|
|
|
|
The engine would reserve space for each outline that should be there according to the count, not for each wall that was actually printed. Values of 999999 where chosen after discussion for _some_ of these (but not anything to do wit hskirt-brim, since we use those in the frontend for dissalowed areas) becasue then you can just fill a number of nines to get a completely 'walled' model printed.
|
|
https://github.com/fieldOfView/Cura into fieldOfView-feature_extruder_warning_icon
|
|
A configuration error or warning in a disabled extruder does not affect slicing or the available profiles for other extruder
|
|
https://github.com/fieldOfView/Cura into fieldOfView-feature_extruder_warning_icon
|
|
|
|
|
|
|
|
Updated the change log with two bug fixes
|
|
We removed the limit of density for the first bridging layer, but there are more settings for that, and there's a similar arbitrary limit for flow in place.
Contributes to issue CURA-8639 and #10736.
|
|
|
|
|
|
Ultimaker didn't make these profiles, so it shouldn't be listed here
|
|
Snapmaker
|
|
|
|
|
|
This is better grammar.
Further improvement for #10718.
|
|
|
|
To avoid over extrusion for high density infill in overlap needs to be set to zero. (see PP-25)
|
|
This is done for all ultimaker profiles (PP-25).
|
|
In the fdmprinter definition the 'infill' is created by 999999 bottom layers to change to infill pattern to lines. This hack is reverted for ultimaker printers. More info: PP-25
|
|
Maximum Feedrate was correct, but compared to the names of the X/Y/Z maximum speeds, this is considered to be more consistent.
Fixes #10767.
|
|
It's quite logical that the 3 dimensions of the printer are next to each other...
Found during work on a plug-in.
|