Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/Ultimaker/Cura.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
path: root/resources
AgeCommit message (Collapse)Author
2021-01-14setting for alternating infill printing direction every layerBagelOrb
2020-11-04Merge branch 'master' into alternate_wall_directionGhostkeeper
2020-11-04Rotate FLSUN-QQ mesh by 135 degrees around negative ZGhostkeeper
Also convert it to 3MF, to save some file size. According to reports in #8663 this is the true orientation of the printer w.r.t. the coordinate system in its firmware. Fixes #8663.
2020-11-03Move build plate mesh below build volumeGhostkeeper
Not inside it. Contributes to issue CURA-7826.
2020-11-03Merge branch 'master' of https://github.com/reibuehl/Cura into reibuehl-masterGhostkeeper
2020-11-03Merge branch '4.8'Ghostkeeper
2020-11-03Change maximum resolution from 0.05mm to 0.25mmGhostkeeper
This was found to be better in https://github.com/Ultimaker/Cura/issues/8321 due to changes to the simplification function. Other printers are assumed to have a similar effect, or have their original value copied from Creality printers.
2020-10-30Set initial page through currentPage after initialisingGhostkeeper
This has a delayed effect through a signal being emitted. That is necessary because the pagesList itself is also updated delayed, so at this time page 0 doesn't exist yet. Contributes to issue CURA-7501.
2020-10-30Don't create DiscardOrKeepProfileChangesDialog on start-upGhostkeeper
Just whenever we need it, please. This removes a warning from the start-up sequence, but the warning is still there when you open the dialogue. It's complaining that a model has size -13 and another has size -14, but I don't know which model that is. The UserChangesModel seems to be fine at a size of 1 or so. Contributes to issue CURA-7501.
2020-10-30Merge pull request #8459 from Ultimaker/fix_filtering_output_mimetypesKonstantinos Karmas
Fix filtering output MIME types
2020-10-30Merge branch 'master' into fix_filtering_output_mimetypesKostas Karmas
2020-10-30Merge pull request #8546 from liquid-printer/add-Liquid-printerKonstantinos Karmas
Added Liquid 3D printer configurations
2020-10-30Update resources/definitions/tinyboy_fabrikator15.def.json Reiner Buehl
Changed profile_name to new jobname tag Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
2020-10-30Update resources/definitions/tinyboy_fabrikator15.def.json Reiner Buehl
Change fill_density to new name Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
2020-10-29Updated print platformgrigorasalex
2020-10-29Changed tabs to spacesgrigorasalex
2020-10-29Changed settings_version from 15 to 16grigorasalex
2020-10-29Changed inherits to fdmprinter and added other dependenciesgrigorasalex
2020-10-28Merge branch 'master' of github.com:Ultimaker/CuraGhostkeeper
2020-10-28Fix up whitespaceGhostkeeper
Mixing tabs and spaces and all that. Weird stuff. Contributes to issue CURA-7803.
2020-10-28Don't use stylized capitalsGhostkeeper
Equal chances for printers and brands, please. Contributes to issue CURA-7803.
2020-10-28Create koonovo_base.def.jsonKOONOVO3DPrinter
Create koonovo_elf.def.json Create koonovo_pyramid.def.json Create koonovo_base_extruder_1.def.json Add files via upload Add files via upload Add files via upload Update koonovo_base.def.json Delete base_global_draft.inst.cfg Delete base_global_high.inst.cfg Delete base_global_standard.inst.cfg Add files via upload Update koonovo_base.def.json Update koonovo_elf.def.json delete extruder1 Update koonovo_pyramid.def.json delete extruder1 Delete koonovo.png Add files via upload Update koonovo_base.def.json change first_start_actions Rename base_global_draft.inst.cfg to koonovo_base_global_draft.inst.cfg Rename base_global_high.inst.cfg to koovono_base_global_high.inst.cfg Rename base_global_standard.inst.cfg to koonovo_base_global_standard.inst.cfg Update koonovo_base.def.json "first_start_actions": [ "DiscoverUM3Action" ] change "first_start_actions": [ "MachineSettingsAction" ], Update koonovo_base.def.json change retraction_speed Create koonovo_d3.def.json This is an independent double X axis, double extrusion machine Add files via upload This is an independent double X axis, double extrusion machine Add files via upload This is an independent double X axis, double extrusion machine Delete koonovo_d3.def.json Add files via upload Delete koonovo_d3_extruder_0.def.json Delete koonovo_d3_extruder_1.def.json Add files via upload Delete koonovo_d3.stl Add files via upload Update koonovo_kn3_extruder_0.def.json Update koonovo_kn3_extruder_1.def.json Update koonovo_kn3.def.json Update koonovo_base.def.json Update koonovo_kn3_extruder_0.def.json Update koonovo_kn3_extruder_1.def.json Update koonovo_base.def.json Update and rename koonovo_base_extruder_1.def.json to koonovo_base_extruder_0.def.json Update koonovo_base.def.json Update koonovo_kn3.def.json Update koonovo_kn3_extruder_0.def.json Update koonovo_kn3_extruder_1.def.json Update koonovo_kn3_extruder_0.def.json Update koonovo_kn3_extruder_1.def.json Add files via upload Add files via upload Add files via upload
2020-10-28Merge branch '4.8' of github.com:Ultimaker/CuraJaime van Kessel
2020-10-28Disable the activate button if the machine is already activeJaime van Kessel
Fixes #8643
2020-10-27Merge branch '4.8'Kostas Karmas
2020-10-26Update the material packages versionsJaime van Kessel
2020-10-22Merge branch '4.8' of github.com:Ultimaker/CuraJaime van Kessel
2020-10-22Up the SDK version to 7.4.0Kostas Karmas
In preparation for release of the 4.8. CURA-7795
2020-10-20Merge branch '4.8' of github.com:Ultimaker/CuraJaime van Kessel
2020-10-19Updating translation files with new stringsGhostkeeper
These are the new strings for 4.8 in every language, to be filled in by translators. Contributes to issue CURA-7782.
2020-10-19Restore reporting e-mailGhostkeeper
Contributes to issue CURA-7782.
2020-10-19Update translation templates for Cura 4.8Ghostkeeper
These are the new strings to be translated. Contributes to issue CURA-7782.
2020-10-19Add libnest2d and pynest2d to list of dependenciesGhostkeeper
Contributes to issue CURA-7781.
2020-10-19Merge branch '4.8' of github.com:Ultimaker/CuraJaime van Kessel
2020-10-18Removed @-symbols from changelogjelle Spijker
The changelog doesn't use the @-syntax for linking Github users. Removed @-symbols in front of user names to stay consistent with previous developer mentions. Also rephrased the description of allow scrolling through settings- tooltips.
2020-10-16Fix binding of extruder enable checkbox if there is no active stackGhostkeeper
There was a typo there. Contributes to issue CURA-7501.
2020-10-16Update change-log with draft 1.3 of release notes for 4.8(-BETA).Remco Burema
2020-10-15Added Liquid 3D printer configurationsgrigorasalex
More details for the printer can be found at https://liquid3d.site
2020-10-15Updated print profile setting_version from 15 to 16 on request of @konskarmReiner Buehl
2020-10-15Merge pull request #8508 from Jip-Hop/masterKonstantinos Karmas
Update the start gcode in creality_cr10max.def.json
2020-10-15Merge branch 'CURA-7745-fix-montior-page-hacks'Ghostkeeper
2020-10-14Added print profiles normal, high and draftReiner Buehl
2020-10-14Added build plate STLReiner Buehl
2020-10-14Merge pull request #8533 from ↵Remco Burema
Ultimaker/CURA-7771_compensate_for_shrinkage_compensation disable material shrinkage percentage
2020-10-14Add files via uploadReiner Buehl
2020-10-14Add files via uploadReiner Buehl
2020-10-13disable material shrinkage percentagejelle Spijker
Contributes to CURA-7771
2020-10-13Added the Artillery Sidewinder X1 and Genius (#8301)cataclism
* Added the configuration files for the Artillery Printers Added the configuration files for the Artillery Printers * Changed version file * Updated versions, removed machine_head_polygon * fixed version in some files * Added generic PLA,PETG,ABS,TPU * Update resources/definitions/artillery_base.def.json Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * Update resources/definitions/artillery_base.def.json Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * 1st batch of update * Apply suggestions from code review Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * 2nd batch of changes * Update resources/quality/artillery/PETG/artillery_0.2_PETG_super.inst.cfg Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * Update resources/quality/artillery/PETG/artillery_0.2_PETG_ultra.inst.cfg Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * Update resources/quality/artillery/PETG/artillery_0.3_PETG_low.inst.cfg Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> * Update resources/quality/artillery/PETG/artillery_0.3_PETG_adaptive.inst.cfg Co-authored-by: Konstantinos Karmas <konskarm@gmail.com> Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
2020-10-12Fix printer name in settingGhostkeeper
This really isn't used anywhere in the final g-code but all right then. Contributes to issue CURA-7767.
2020-10-12Change tabs into 4 spacesGhostkeeper
This is our code style for these files. Contributes to issue CURA-7767.
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-14 20:51:38 +0300