From bf131f539ec57d53f2cccc9d8b5053a382d16d58 Mon Sep 17 00:00:00 2001 From: Rijk van Manen Date: Tue, 15 Mar 2022 13:48:41 +0100 Subject: remove all wall_thickness statements All print profiles are following the global rules, no print profile specific exceptions. PP-115 --- resources/definitions/ultimaker3.def.json | 1 - resources/definitions/ultimaker_s3.def.json | 1 - resources/definitions/ultimaker_s5.def.json | 1 - .../intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg | 1 - .../intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg | 1 - .../intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg | 1 - .../intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg | 1 - .../ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg | 1 - .../intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg | 1 - .../intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg | 1 - .../intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg | 1 - .../intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg | 1 - resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg | 1 - .../ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg | 1 - .../quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg | 1 - resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 2 -- resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg | 3 --- resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg | 2 -- .../quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg | 2 -- .../quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg | 2 -- .../quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg | 3 --- resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg | 3 --- resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg | 3 --- resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg | 2 -- .../quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg | 2 -- .../quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg | 2 -- resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg | 3 --- resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg | 3 --- resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg | 1 - resources/variants/ultimaker3_aa0.8.inst.cfg | 1 - resources/variants/ultimaker3_aa04.inst.cfg | 1 - resources/variants/ultimaker3_bb0.8.inst.cfg | 1 - resources/variants/ultimaker3_extended_aa0.8.inst.cfg | 1 - resources/variants/ultimaker3_extended_aa04.inst.cfg | 1 - resources/variants/ultimaker3_extended_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_aa0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_aa04.inst.cfg | 1 - resources/variants/ultimaker_s3_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_cc04.inst.cfg | 1 - resources/variants/ultimaker_s3_cc06.inst.cfg | 1 - resources/variants/ultimaker_s5_aa0.8.inst.cfg | 1 - resources/variants/ultimaker_s5_aa04.inst.cfg | 1 - resources/variants/ultimaker_s5_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s5_cc04.inst.cfg | 1 - resources/variants/ultimaker_s5_cc06.inst.cfg | 1 - 302 files changed, 357 deletions(-) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 197bfa4513..48bb7b4362 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -166,7 +166,6 @@ "top_bottom_thickness": { "value": "1" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "wall_thickness": { "value": "1" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" } } } diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 034a2d78d4..83feb98eb2 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -159,7 +159,6 @@ "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "wall_thickness": { "value": "1" }, "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, "initial_layer_line_width_factor": { "value": "120" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 36aa311c23..c4afee4e3a 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -161,7 +161,6 @@ "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "wall_thickness": { "value": "1" }, "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, "optimize_wall_printing_order": { "value": "True" }, diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 5028a193e1..bd1f9f3439 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg index 03b3974996..c22e022523 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg index 7d2fe3435c..df4a46faa2 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg index 12c05d6a9a..a978570078 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 5d869888c5..043de1aacc 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg index 7b455965b6..1a630cad61 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg index 20eef0666e..f1f98a6cb0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg index 7826c9b0b2..ea0f5931e1 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index fdaf5f32ed..673594a72c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 -wall_thickness = =line_width * 2 top_bottom_thickness = =wall_thickness \ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 3dbb03b38c..eb3b69b9db 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg index c80e665041..65855281eb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg index 5a0fdccf3c..c7dcbe12fb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg index 610fa16fcc..bc62368f03 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index 4ca187133e..48803fc236 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 -wall_thickness = =line_width * 2 top_bottom_thickness = =wall_thickness \ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 374cb1bca4..dd43fa9500 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg index 45cba2271e..8219747ced 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg index 3658a72539..3b35985dd5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg index 9633a2d6e8..38d69ff221 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 25dcb1a793..9935ddbbe9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg index ff6adc5257..f80acb88f2 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg index 09c67fb20e..4002a3da6c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg index 8934e3fd80..60f10c9b34 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index a3f5b02ec2..ca991b5002 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 -wall_thickness = =line_width * 2 top_bottom_thickness = =wall_thickness \ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index a811b9d673..e1a3295b0d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 top_bottom_thickness = =wall_thickness -wall_thickness = =line_width * 2 infill_sparse_density = 15 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg index 39292b0306..40608a55d0 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg index 53eb8d16fd..3feb685904 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg index 155f6177cc..3dea8cf472 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg @@ -13,5 +13,4 @@ variant = AA 0.4 [values] speed_infill = 50 -wall_thickness = =wall_line_width * 3 top_bottom_thickness = =wall_thickness diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index 5d22b722af..2a3dcd4ca6 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall speed_wall_x = =speed_wall speed_layer_0 = 20 -wall_thickness = =line_width * 2 top_bottom_thickness = =wall_thickness \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg index 15483409a7..1c0629f317 100644 --- a/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg @@ -18,4 +18,3 @@ infill_sparse_density = 22 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg index 63563ac9ef..d25348a524 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg @@ -21,4 +21,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 speed_wall = =math.ceil(speed_print * 50 / 60) top_bottom_thickness = 0.75 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg index b13c39c673..ccdbfcf67c 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg @@ -19,4 +19,3 @@ speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.72 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg index 2bbb4952bf..4f8ed51f0a 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg @@ -19,4 +19,3 @@ speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.8 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg index 9bb3b38200..60b3e54ef5 100644 --- a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg @@ -21,4 +21,3 @@ speed_topbottom = =math.ceil(speed_print * 20 / 55) speed_wall = =math.ceil(speed_print * 40 / 55) speed_wall_0 = =math.ceil(speed_print * 25 / 55) top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg index 0deab058ad..ac9a38f61a 100644 --- a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg @@ -19,4 +19,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg index ae0b9cefa8..dc365cd367 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 22 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg index 68aff39936..1e3072b513 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg @@ -23,7 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 55) top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 40 / 55) speed_wall_x = =math.ceil(speed_print * 80 / 55) speed_infill = =math.ceil(speed_print * 100 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg index a1f9dce7f0..878993fd03 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg @@ -21,6 +21,5 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 -wall_thickness = 1.05 speed_topbottom = =math.ceil(speed_print * 15 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg index a667f45e44..bb4cf23979 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg @@ -21,4 +21,3 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg index a73c13ecec..e5e903544a 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg @@ -21,4 +21,3 @@ speed_infill = =math.ceil(speed_print * 55 / 40) speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg index 85d8436603..de37f1e8bf 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg index 56727fc86f..0e7e14d661 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 22 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg index 7293177170..ac7ac2d3f7 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg @@ -22,7 +22,6 @@ speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg index ca3224ace7..5e20f288fe 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg @@ -21,6 +21,5 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 -wall_thickness = 1.05 speed_topbottom = =math.ceil(speed_print * 15 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg index 2be7544374..0356681013 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg @@ -21,4 +21,3 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg index 997f1fbab1..ec96dca598 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg index 8935e57bd1..008e9acdbb 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index c4d4798cef..b2114f254b 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -38,4 +38,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index e0fa416aaf..08d8680014 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -38,4 +38,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 29bcd5e3b9..da52322af5 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -43,4 +43,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index 1b1102ae41..940468c2c9 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -43,4 +43,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index 65c7e56fee..15f1447a29 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -38,4 +38,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index c99e991aef..be2e57c767 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -38,4 +38,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg index e3104ecb40..df742c79c8 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg @@ -40,5 +40,4 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1 speed_infill = =math.ceil(speed_print * 40 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg index 1953c20a11..7a1fc9963f 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg @@ -40,4 +40,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 4680476de8..0c3056f47f 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -39,7 +39,6 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 -wall_thickness = 1.06 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index 2f0a543ec5..b28481a6aa 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -38,4 +38,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 -wall_thickness = 1.06 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index 1442289d90..d31d84a314 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -44,5 +44,4 @@ support_top_distance = 0.55 support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.2 speed_infill = =math.ceil(speed_print * 55 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index 13066f1685..6048b82677 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -42,4 +42,3 @@ support_pattern = lines support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index 9288409611..7ca19f5a2c 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -43,4 +43,3 @@ support_top_distance = 0.5 support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 2.4 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index f2caa2441b..f014f71ef2 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -43,4 +43,3 @@ support_top_distance = 0.5 support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 2.4 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg index 77120dec46..e40e91b7a5 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg @@ -34,6 +34,5 @@ support_enable = True support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 0.88 speed_topbottom = =math.ceil(speed_print * 15 / 30) speed_infill = =math.ceil(speed_print * 80 / 30) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg index fce0028973..9f55d229e8 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg @@ -34,4 +34,3 @@ support_enable = True support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg index 11b213b799..b0e78c2057 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg @@ -35,6 +35,5 @@ support_enable = True support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 1.2 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg index db8e5058f6..999509b82d 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg @@ -35,4 +35,3 @@ support_enable = True support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index 28c8ee4ead..b417c4c1df 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -41,5 +41,4 @@ support_line_distance = 3.5333 support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 -wall_thickness = 1.06 speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index 36059ce309..b94f0349f7 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -41,4 +41,3 @@ support_line_distance = 3.5333 support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 -wall_thickness = 1.06 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg index dd0a425aec..70510c98d2 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg @@ -35,4 +35,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 2.0 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg index 3116e3d2fc..cd6b811561 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg @@ -35,4 +35,3 @@ support_infill_rate = =20 if support_enable and support_structure == 'normal' el support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 10f6d07dba..beb0969fd8 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -64,6 +64,5 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index ca4f9ec1d9..f5b3d298fa 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -64,4 +64,3 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index c77c6fcb95..390dbf440d 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -64,4 +64,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 58b93a9af1..ab81d3bfe1 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -64,6 +64,5 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index b066ba3929..4bec3c7f24 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -64,4 +64,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index a89ac4f68b..fd4813a356 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -64,4 +64,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg index 5303e5f526..47749c135c 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg @@ -39,5 +39,4 @@ support_infill_rate = =25 if support_enable and support_structure == 'normal' el support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 0.88 speed_infill = =math.ceil(speed_print * 40 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg index b4945a27cd..26299276bb 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg @@ -37,4 +37,3 @@ support_infill_rate = =25 if support_enable and support_structure == 'normal' el support_xy_distance = 0.65 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 739f949dfc..a56d5aa535 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -40,5 +40,4 @@ support_infill_rate = =25 if support_enable and support_structure == 'normal' el support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.14 speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg index 956d708e69..49dac6e9c8 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg index 61ede571db..46476599f6 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg @@ -18,7 +18,6 @@ cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_print = 55 speed_travel = 150 speed_layer_0 = =round(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg index ab44842212..649b50dc9c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg @@ -18,7 +18,6 @@ cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 top_bottom_thickness = 0.72 -wall_thickness = 1.05 speed_print = 45 speed_layer_0 = =round(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg index 63f92a2770..9fd7dd9cf6 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg @@ -18,7 +18,6 @@ cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 top_bottom_thickness = 0.8 -wall_thickness = 1.05 speed_print = 45 speed_layer_0 = =round(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg index b7d9d9d437..b8b8ec5352 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg @@ -21,4 +21,3 @@ speed_infill = =math.ceil(speed_print * 55 / 40) speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg index 36e2b2180b..dde8e3bbb1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg @@ -20,4 +20,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg index f3d9bb79d9..6031209ccc 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg @@ -20,5 +20,4 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg index 0ab179959f..4c08270f6d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg @@ -24,7 +24,6 @@ speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg index dc4b06940c..ea6993c7f9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg @@ -23,6 +23,5 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 -wall_thickness = 1.05 speed_topbottom = =math.ceil(speed_print * 15 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg index 2ea0c4a828..bbfbd452d3 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg @@ -23,4 +23,3 @@ speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 -wall_thickness = 1.05 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg index 60642a3c69..f6984cbd4f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg @@ -22,4 +22,3 @@ retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg index 23e8d25778..e2f2f1b5f4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg @@ -20,5 +20,4 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 2.1 retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index fdaecf1142..9df0561ba1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -39,4 +39,3 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index b9845f7002..83ac3b0500 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -39,4 +39,3 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 -wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 965182eb4d..51038587a3 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -43,4 +43,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index 817635d4fd..51584f5f9b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -43,4 +43,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 -wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg index 8f3db13ad6..db1798319b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg @@ -37,5 +37,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg index c7e44efbbf..738287ba02 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg @@ -37,5 +37,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 retraction_combing_max_distance = 50 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg index 79a6223869..0f0663b905 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg @@ -39,5 +39,4 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1 speed_infill = =math.ceil(speed_print * 40 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg index b65b044aea..06c242e813 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg @@ -39,4 +39,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg index 2358657ab3..ad247a4b3a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg @@ -39,7 +39,6 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 -wall_thickness = 1.06 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg index 5a9283faff..19daf28829 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg @@ -38,4 +38,3 @@ support_pattern = lines support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 -wall_thickness = 1.06 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 18fe82d680..f79e3d7e47 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -44,5 +44,4 @@ support_top_distance = 0.55 support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.2 speed_infill = =math.ceil(speed_print * 55 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg index 8685edd405..d872acfcf0 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg @@ -42,4 +42,3 @@ support_pattern = lines support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg index 02b1e8ae1f..a9580b1655 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg @@ -42,4 +42,3 @@ support_top_distance = 0.5 support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 2.4 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg index e9363c7f73..f089dbf76b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg @@ -42,4 +42,3 @@ support_top_distance = 0.5 support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 2.4 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg index e45b40cada..c939fef2f3 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg @@ -33,5 +33,4 @@ support_enable = True support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 0.88 speed_topbottom = =math.ceil(speed_print * 15 / 30) \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg index 4a193f9fe5..93a7a18764 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg @@ -33,4 +33,3 @@ support_enable = True support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg index 41184ed396..f113656a4e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg @@ -34,6 +34,5 @@ support_enable = True support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 1.2 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg index a90ac4a92d..3f4651f529 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg @@ -34,4 +34,3 @@ support_enable = True support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.19 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg index cece9e3581..3f8c33b01c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg @@ -40,5 +40,4 @@ support_line_distance = 3.5333 support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 -wall_thickness = 1.06 speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg index 8607215af8..055285ac60 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg @@ -40,4 +40,3 @@ support_line_distance = 3.5333 support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 -wall_thickness = 1.06 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg index 645897c076..25d9cf6700 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg @@ -34,4 +34,3 @@ support_infill_rate = =0 if support_structure == 'tree' else 20 support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg index 274e88148a..ea386d606c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg @@ -20,5 +20,4 @@ infill_sparse_density = 20 speed_layer_0 = 30 speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg index b3603991b1..47b9eae5e8 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg @@ -22,7 +22,6 @@ speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg index 08d60d6018..9bee196642 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg @@ -22,7 +22,6 @@ speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) top_bottom_thickness = 0.75 -wall_thickness = 0.7 speed_wall_0 = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall_x = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg index c86e206475..7e99b790ed 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg @@ -21,5 +21,4 @@ speed_layer_0 = 30 speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 -wall_thickness = 1.05 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg index 43cf222a39..3f72860e7f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg @@ -20,5 +20,4 @@ infill_sparse_density = 20 speed_layer_0 = 30 speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 1.59 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg index de2df7dee3..6c337bf1d5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg @@ -20,5 +20,4 @@ infill_sparse_density = 20 speed_layer_0 = 30 speed_print = 40 top_bottom_thickness = 1.2 -wall_thickness = 2.1 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg index 84442b895a..f561853992 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg @@ -18,4 +18,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg index 94562f422d..927fff72d8 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 speed_wall = =math.ceil(speed_print * 50 / 60) top_bottom_thickness = 0.75 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg index 43a5cb6596..76d264ac80 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 speed_wall = =math.ceil(speed_print * 50 / 60) top_bottom_thickness = 0.75 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg index c7c7753cf2..3af455dca4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg @@ -20,4 +20,3 @@ speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.72 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg index 2b3c24a912..e6c6d71737 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg @@ -20,4 +20,3 @@ speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.8 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg index 8f3079c4f4..b4719e69db 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 20 / 55) speed_wall = =math.ceil(speed_print * 40 / 55) speed_wall_0 = =math.ceil(speed_print * 25 / 55) top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg index f7798a0293..e4f31c9fe1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg @@ -19,4 +19,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index a7dad05ae9..9f7058912a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -63,6 +63,5 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 6f9612ff9a..961124229a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -63,4 +63,3 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 7c94a57190..db506827db 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -63,4 +63,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index 6e2a8960bd..eca5bdfd15 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -63,6 +63,5 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg index b13fcb5572..0209e93e41 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg @@ -64,4 +64,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index 935c0bb603..7873dc5cac 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -64,4 +64,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg index b3308686de..44f944a3d4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg @@ -18,4 +18,3 @@ infill_sparse_density = 20 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 -wall_thickness = 0.88 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg index 4161bd3781..8090d369fc 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 50) top_bottom_thickness = 0.75 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg index b26340fdb2..dbec326472 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 40) speed_travel = 150 speed_wall = =math.ceil(speed_print * 30 / 40) top_bottom_thickness = 0.75 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg index a4ee94c36c..cff856f97d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg @@ -21,4 +21,3 @@ speed_print = 40 speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) top_bottom_thickness = 0.8 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg index 173b551e8b..0ade828d53 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg @@ -22,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_print * 30 / 50) top_bottom_thickness = 1.2 -wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg index 8a5d70f1f7..f53fe84bb0 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg @@ -19,4 +19,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 -wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg index 35654230e4..9a3f92105a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg @@ -39,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 0.88 speed_infill = =math.ceil(speed_print * 40 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg index 35a2fd03db..93b84c7168 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg @@ -37,4 +37,3 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else support_xy_distance = 0.65 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg index f7fbb956b7..6637e06deb 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg @@ -40,5 +40,4 @@ support_infill_rate = =0 if support_structure == 'tree' else 25 support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 -wall_thickness = 1.14 speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg index bba792d870..82eef143ca 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -17,4 +17,3 @@ infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) -wall_thickness = 0.92 diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg index df61c040ae..559c3fdbb8 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -16,4 +16,3 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 1eaab8a586..21e09ea09b 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -49,4 +49,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg index c09c172357..87af117ef0 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -16,7 +16,6 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 retraction_combing = all diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index 1287a5b43b..82ddc1ae95 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -33,4 +33,3 @@ top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index fe621363d4..50e988afa2 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -51,4 +51,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index 0da1ac1283..2ec6072c70 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -32,4 +32,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 4a0278c7c2..7094d0635e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -24,4 +24,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index b302bbee32..f6a00a7527 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index e74bf83698..e2b621c8d4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -25,7 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index da5b43de8a..e837c5cd9c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -34,4 +34,3 @@ support_offset = 2 support_pattern = triangles support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 6175c54619..737d4683a5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -43,4 +43,3 @@ speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index 413b3da609..1379433040 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -22,4 +22,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index c2129652ee..0eb741335b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -59,4 +59,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 1b3fc14f06..1cf03d3cc7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -57,4 +57,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index c704d6ca5d..8b167fe35d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -59,4 +59,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 2964528789..cb176dbb96 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -56,4 +56,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg index 5ef579300e..971cb3cc1d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg @@ -22,6 +22,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 retraction_combing_max_distance = 8 retraction_combing = all diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 818e01f742..436bcc487e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -25,4 +25,3 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 22a6b35322..7122388645 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -24,4 +24,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index bfc4c38c8c..d51d53a932 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -26,4 +26,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 30 / 60) top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index c47f454305..e8c38d5114 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -22,4 +22,3 @@ prime_tower_enable = False skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 3d74fc55b3..532a8453cd 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -57,4 +57,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 70935140fb..6f6819e513 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -57,4 +57,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 8c84e4787c..65f9bfa7de 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -56,4 +56,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index b3b71ee573..024e1469ba 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -31,4 +31,3 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 71f674616f..e45cfb4b06 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -26,5 +26,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 42de88a562..b41f591f2e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -28,5 +28,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 370f636bc4..c72deb5540 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -58,4 +58,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index d7992a20b9..f44c8e7955 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -59,4 +59,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 59f0cae71d..d2c6c02bce 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -56,4 +56,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index added0b5ad..312157bdea 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -34,4 +34,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 0c55551453..708ddd4ff5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -36,4 +36,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 00bdc6c219..3705cc94ad 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 16093951d2..23baa1d8af 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -40,4 +40,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 9a2b73fa91..8981a40303 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -40,4 +40,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index d08659c036..272485845b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -40,4 +40,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 1f86a66c38..eb59d69f6c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -29,4 +29,3 @@ speed_print = 45 support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 1c144290b4..b8eaa7d061 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -34,4 +34,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 31f23166f0..595ab7098b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -35,5 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x - diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index f0bc86da9f..969441316a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -50,4 +50,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 73ae3a5564..063485cb2d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -51,4 +51,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index af1cbe6051..11015d0af0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -50,4 +50,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg index f3cc0937a0..777dc63222 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -16,4 +16,3 @@ cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 speed_topbottom = =math.ceil(speed_print * 30 / 55) -wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg index fc2ae7e17f..1d62998c14 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -17,4 +17,3 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 59423682f1..e39774bf16 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index 34fa0d7c84..f65f3b2043 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -17,7 +17,6 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index 5f51f32b6a..74350d9509 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -33,4 +33,3 @@ top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 2f6c5f2888..7b335ddd02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -50,4 +50,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index 447d0412aa..faf54f8f77 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -32,5 +32,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index 9644732c0c..69ee9155fc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -24,9 +24,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 - - speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg index 4d33d3f8e2..79d9d27df7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg index a803e13f20..d9153d20b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg @@ -25,7 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg index b3ef4abe94..2d7f889236 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -35,4 +35,3 @@ support_offset = 2 support_pattern = triangles support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg index 757743c70b..c732cb2deb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 1aad4c498f..78e6cee580 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -43,5 +43,3 @@ speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 -wall_thickness = 1 - diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 7c42d02ada..8b4cdca8f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -23,8 +23,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 - infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index f4bb4ba024..71ae63c975 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -56,5 +56,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index ece85f2168..37a0599ee7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -55,5 +55,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 0caf9b1cd6..363a8ab0b7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -57,5 +57,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 751942b0f9..81b352fe8c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -55,5 +55,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index bff77a1390..0fd77e24b3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -22,8 +22,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 - infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index d5a5be70f8..a4b3fb3380 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -26,8 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 -wall_thickness = 0.8 - jerk_travel = 50 infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index d274eaffd3..2f89be38f9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -25,8 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 2f54d272fe..d80d8427c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -27,8 +27,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 2c23a4ae71..20025a8c0b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -23,8 +23,6 @@ retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 362d9ef5b9..fd5e5a7217 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -37,8 +37,6 @@ prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 - -wall_thickness = =line_width * 3 top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index b59e2537e3..66aed15373 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -53,5 +53,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 3b3ff5b463..a600281dc4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -54,5 +54,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 2530ca9490..37a9293976 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -56,5 +56,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index a3d1d1f255..d212ce86e6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -32,5 +32,3 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index cb2d019fdc..9cf21612a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -27,5 +27,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 - -wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 32ae7fbd53..14dcd79a29 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -28,7 +28,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 - layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index a81a3b9f08..126cf13670 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -29,5 +29,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 - diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index bda8ad2775..7a67e10783 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -37,8 +37,6 @@ prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 - -wall_thickness = =line_width * 3 top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 8b0b8abf0c..b20cc2eaef 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -55,5 +55,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 0f4a416273..849763dd0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -55,6 +55,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 2b0b1c1720..5b2d81f30e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -54,6 +54,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 279e4f4beb..ab1d37a0ed 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,6 @@ prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 9c6ec154fe..01bec374a6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -26,7 +26,6 @@ raft_margin = 10 support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 6ef378376d..86734f57a5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,6 @@ prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 0350a1836f..4ae29a2e78 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index cfe751f38b..690ae20b68 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 58a7cea554..ed4ca081cb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -38,4 +38,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index 91e9ac5632..d8f7e4e236 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -32,4 +32,3 @@ speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_thickness = =wall_line_width_0 + wall_line_width_x \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index db12dff2f0..f9a23df7dc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -34,4 +34,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index a97439f98c..31d43d6d1a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -35,4 +35,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 47cb0623eb..bc3464b305 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 1155e46024..bbbc40dd0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -48,5 +48,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index ab5562474d..1eb27c3e9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index c354eea9e3..6ce68aea6b 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index a0778a7f88..a6cc519d08 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index c78b060dee..7c660d8d67 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 031db016b6..7cb6a071fb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg index c1d936a7a7..681eae2250 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg @@ -16,4 +16,3 @@ cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 speed_topbottom = =math.ceil(speed_print * 30 / 55) -wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg index 761a361df3..ec7975921a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg @@ -17,4 +17,3 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 2b6121e9ee..2e238eba22 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index d81ae5f88e..be138a72e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -17,7 +17,6 @@ retraction_extrusion_window = 0.5 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 -wall_thickness = 0.92 initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index 621d837b92..d47272bbf6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -33,4 +33,3 @@ top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 9870b07ab4..afd70b7318 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -50,4 +50,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index e4aa517abb..4be629314e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -32,5 +32,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index d6ef41abe1..c6d0ff9985 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -24,6 +24,5 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -wall_thickness = 1 speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg index 04353d64f9..893c500797 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg @@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg index c1bb6be22f..df7189fbb8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg @@ -25,7 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg index 3e70bcacaf..f350d12cae 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg @@ -35,4 +35,3 @@ support_offset = 2 support_pattern = triangles support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 top_bottom_thickness = 1 -wall_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg index f4528b7fb8..936d157139 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index 26dc7ea9c3..8ddf41fbea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -43,5 +43,3 @@ speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 -wall_thickness = 1 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 3f3ce3ce79..56924e319a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -25,8 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickness == 0.8 else top_bottom_thickness -wall_thickness = 1 - - infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 601d1164fd..f90cab6aee 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -55,4 +55,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index cad4e25f95..3222a33386 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -55,4 +55,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index 6cc4d15e73..027b93ca14 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -57,5 +57,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 093a04b8a2..9b98b10d72 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -55,5 +55,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 2d39086d6f..344ad9108c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -24,8 +24,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickness == 0.8 else top_bottom_thickness -wall_thickness = 1 - infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index f339aa3988..d057a8a057 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -27,8 +27,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 -wall_thickness = 0.8 - jerk_travel = 50 infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index 206442121b..1ed844b4fc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -25,8 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 3f29983cfd..2e69215798 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -27,8 +27,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 227730f359..8939294b54 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -23,8 +23,6 @@ retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 -wall_thickness = 1 - jerk_travel = 50 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index 141c4604b0..efccc3a347 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -37,8 +37,6 @@ prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 - -wall_thickness = =line_width * 3 top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 8c8091cb1e..7312f07e1a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -54,5 +54,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 047ee82739..c9229621dc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -56,5 +56,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index c91c73983e..46a74cb3a9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -56,5 +56,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 - -wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index d65f61cf74..06a79da7bb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -32,5 +32,3 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 - -wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index bea0ca9228..5dda143bb2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -27,5 +27,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 - -wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 190f2f8e06..cdb80b7ed7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -28,5 +28,4 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 190f3422b0..c98bc73da9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -29,5 +29,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_thickness = 1.23 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 9e614cdd28..54eb99d099 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -37,8 +37,6 @@ prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 - -wall_thickness = =line_width * 3 top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index a867e168b1..790551aab4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -55,5 +55,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index f4ef171a69..6b01e411e5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -55,6 +55,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index ce9b26051e..20ce8fd979 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -54,6 +54,3 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 - -wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 495f18dc4a..70cf3bd857 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,6 @@ prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 814c7a2b5e..1e2ae90927 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -26,7 +26,6 @@ raft_margin = 10 support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index bf341d3bf0..0833197f9c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,6 @@ prime_tower_enable = True support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 2042e29518..074e24b223 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index f0b09c333d..067033d1c3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 9cb6b43d70..26c2b53052 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -38,4 +38,3 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 6f02b91def..852b4ad45a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -32,4 +32,3 @@ speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_thickness = =wall_line_width_0 + wall_line_width_x \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 818e9130e5..5028f98e7b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -34,4 +34,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index b5d32d020c..4c4164feab 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -35,4 +35,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index d89919328e..12b4734b7f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 99511e1ab6..bb6520947b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 19842185fe..847552d471 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index a9cef5ca36..198c8df013 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index e8a37bb6fc..717b14a722 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 9052dfee7d..3785791ec2 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index fd41d88a76..e1b22ab0f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -35,4 +35,3 @@ support_angle = 70 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index abe079eeb5..1f75b862d0 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -53,4 +53,3 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_thickness = 2 diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg index 8362a52fb5..7c24475a38 100644 --- a/resources/variants/ultimaker3_aa04.inst.cfg +++ b/resources/variants/ultimaker3_aa04.inst.cfg @@ -39,5 +39,4 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_thickness = 1.3 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index af5daf9f11..43cd08faeb 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -84,4 +84,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_thickness = 1 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 0f603036b8..bf8d74c344 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -53,4 +53,3 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_thickness = 2 diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg index 2a523703b6..e875fd4263 100644 --- a/resources/variants/ultimaker3_extended_aa04.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg @@ -39,5 +39,4 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_thickness = 1.3 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset \ No newline at end of file diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index b73d5c2bc7..9dbd34093d 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -84,4 +84,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_thickness = 1 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 3bc112c7fa..8284a48ce3 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -54,4 +54,3 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_thickness = 2 diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg index 9e56a0e75e..5cbc772525 100644 --- a/resources/variants/ultimaker_s3_aa04.inst.cfg +++ b/resources/variants/ultimaker_s3_aa04.inst.cfg @@ -38,4 +38,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_thickness = 1.3 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 5f6373338b..72d4cb3a9c 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -82,4 +82,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_thickness = 1 diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg index 3f61f5d326..7cd5454fbf 100644 --- a/resources/variants/ultimaker_s3_cc04.inst.cfg +++ b/resources/variants/ultimaker_s3_cc04.inst.cfg @@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = =layer_height * 6 -wall_thickness = =line_width * 3 diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg index 9a216b8506..a01a58fef8 100644 --- a/resources/variants/ultimaker_s3_cc06.inst.cfg +++ b/resources/variants/ultimaker_s3_cc06.inst.cfg @@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = =layer_height * 6 -wall_thickness = =line_width * 3 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 75581681f9..2ec650e81d 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -54,4 +54,3 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_thickness = 2 diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg index 923d8cadec..e5507ba661 100644 --- a/resources/variants/ultimaker_s5_aa04.inst.cfg +++ b/resources/variants/ultimaker_s5_aa04.inst.cfg @@ -38,4 +38,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_thickness = 1.3 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 4c43f2da26..ae2b8020a4 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -82,4 +82,3 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_thickness = 1 diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg index 6934706bcd..b745ab8a6c 100644 --- a/resources/variants/ultimaker_s5_cc04.inst.cfg +++ b/resources/variants/ultimaker_s5_cc04.inst.cfg @@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = =layer_height * 6 -wall_thickness = =line_width * 3 diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg index 98821ca002..0a87570372 100644 --- a/resources/variants/ultimaker_s5_cc06.inst.cfg +++ b/resources/variants/ultimaker_s5_cc06.inst.cfg @@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = =layer_height * 6 -wall_thickness = =line_width * 3 -- cgit v1.2.3