From 6e7e0b5f7706caab3e116bf98e1ed7a10db5dd49 Mon Sep 17 00:00:00 2001
From: "p.kuiper"
Date: Fri, 3 Jun 2022 14:02:53 +0200
Subject: Switching on support gradual infill and support offset to 2*line
width when support interface layer is enabled.
Relates to PP-108
---
resources/definitions/ultimaker.def.json | 20 +++++++++++++-------
resources/definitions/ultimaker3.def.json | 5 -----
resources/definitions/ultimaker_s3.def.json | 5 -----
resources/definitions/ultimaker_s5.def.json | 5 -----
4 files changed, 13 insertions(+), 22 deletions(-)
(limited to 'resources/definitions')
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 172a7ccfbd..67a602bd19 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -221,19 +221,22 @@
"value": true
},
"support_infill_rate": {
- "value": "80 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 80"
+ "value": "0 if support_enable and support_structure == 'tree' else (80 if support_interface_enable else 15)"
},
"support_offset": {
- "value": "2*line_width"
+ "value": "2*line_width if support_interface_enable else 0"
},
"support_xy_distance": {
"value": "support_offset"
},
+ "support_xy_distance_overhang": {
+ "value": "wall_line_width_0"
+ },
"support_join_distance": {
"value": 0
},
"gradual_support_infill_steps": {
- "value": 2
+ "value": "2 if support_interface_enable else 0"
},
"gradual_support_infill_step_height": {
"value": "4*layer_height"
@@ -247,14 +250,17 @@
"support_interface_pattern": {
"value": "'zigzag'"
},
- "support_interface_enable": {
- "value": true
- },
- "minimum_interface_area": {
+ "minimum_interface_area": {
"value": "minimum_support_area"
},
"support_interface_offset": {
"value": "support_offset"
+ },
+ "support_use_towers": {
+ "value": false
+ },
+ "support_z_distance": {
+ "value": "0"
}
}
}
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 858d5f91a7..38428b89ca 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -139,11 +139,6 @@
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
"speed_wall_x": { "value": "speed_wall" },
"support_angle": { "value": "45" },
- "support_pattern": { "value": "'triangles'" },
- "support_use_towers": { "value": "False" },
- "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
- "support_xy_distance_overhang": { "value": "wall_line_width_0" },
- "support_z_distance": { "value": "0" },
"switch_extruder_prime_speed": { "value": "15" },
"switch_extruder_retraction_amount": { "value": "8" },
"top_bottom_thickness": { "value": "1" },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 67f8ddab83..1d0d8a7613 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -131,11 +131,6 @@
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
"speed_wall_x": { "value": "speed_wall" },
"support_angle": { "value": "45" },
- "support_pattern": { "value": "'triangles'" },
- "support_use_towers": { "value": "False" },
- "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
- "support_xy_distance_overhang": { "value": "wall_line_width_0" },
- "support_z_distance": { "value": "0" },
"switch_extruder_prime_speed": { "value": "15" },
"switch_extruder_retraction_amount": { "value": "8" },
"top_bottom_thickness": { "value": "1" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 005c876117..b48c5cca6e 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -133,11 +133,6 @@
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
"speed_wall_x": { "value": "speed_wall" },
"support_angle": { "value": "45" },
- "support_pattern": { "value": "'triangles'" },
- "support_use_towers": { "value": "False" },
- "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
- "support_xy_distance_overhang": { "value": "wall_line_width_0" },
- "support_z_distance": { "value": "0" },
"switch_extruder_prime_speed": { "value": "15" },
"switch_extruder_retraction_amount": { "value": "8" },
"top_bottom_thickness": { "value": "1" },
--
cgit v1.2.3