From 10e0175947e0c31b2e49de0a6ba69b396e5d8e2e Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 19 Sep 2018 17:10:58 +0200 Subject: Update translation templates for Cura 3.5 These are the new strings for Cura 3.5. Contributes to issue CURA-5741. --- resources/i18n/fdmprinter.def.json.pot | 296 +++++++++++++++++++++------------ 1 file changed, 194 insertions(+), 102 deletions(-) (limited to 'resources/i18n/fdmprinter.def.json.pot') diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index c505755444..79bcf5c7dc 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -1,17 +1,12 @@ -# Cura JSON setting files -# Copyright (C) 2018 Ultimaker -# This file is distributed under the same license as the Cura package. -# Ruben Dulek , 2018. -# +#, fuzzy msgid "" msgstr "" -"Project-Id-Version: Cura 3.4\n" -"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" -"POT-Creation-Date: 2018-03-29 08:36+0200\n" +"Project-Id-Version: Uranium json setting files\n" +"Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n" +"POT-Creation-Date: 2018-09-19 17:07+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" -"Language-Team: TEAM\n" -"Language: xx_XX\n" +"Language-Team: LANGUAGE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -82,6 +77,18 @@ msgctxt "material_guid description" msgid "GUID of the material. This is set automatically. " msgstr "" +#: fdmprinter.def.json +msgctxt "material_diameter label" +msgid "Diameter" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_diameter description" +msgid "" +"Adjusts the diameter of the filament used. Match this value with the " +"diameter of the used filament." +msgstr "" + #: fdmprinter.def.json msgctxt "material_bed_temp_wait label" msgid "Wait for Build Plate Heatup" @@ -1154,6 +1161,20 @@ msgctxt "top_bottom_pattern_0 option zigzag" msgid "Zig Zag" msgstr "" +#: fdmprinter.def.json +msgctxt "connect_skin_polygons label" +msgid "Connect Top/Bottom Polygons" +msgstr "" + +#: fdmprinter.def.json +msgctxt "connect_skin_polygons description" +msgid "" +"Connect top/bottom skin paths where they run next to each other. For the " +"concentric pattern enabling this setting greatly reduces the travel time, " +"but because the connections can happend midway over infill this feature can " +"reduce the top surface quality." +msgstr "" + #: fdmprinter.def.json msgctxt "skin_angles label" msgid "Top/Bottom Line Directions" @@ -1261,6 +1282,33 @@ msgid "" "already a wall in place." msgstr "" +#: fdmprinter.def.json +msgctxt "wall_min_flow label" +msgid "Minimum Wall Flow" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_min_flow description" +msgid "" +"Minimum allowed percentage flow for a wall line. The wall overlap " +"compensation reduces a wall's flow when it lies close to an existing wall. " +"Walls whose flow is less than this value will be replaced with a travel " +"move. When using this setting, you must enable the wall overlap compensation " +"and print the outer wall before inner walls." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_min_flow_retract label" +msgid "Prefer Retract" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_min_flow_retract description" +msgid "" +"If enabled, retraction is used rather than combing for travel moves that " +"replace walls whose flow is below the minimum flow threshold." +msgstr "" + #: fdmprinter.def.json msgctxt "fill_perimeter_gaps label" msgid "Fill Gaps Between Walls" @@ -1677,11 +1725,6 @@ msgctxt "infill_pattern option concentric" msgid "Concentric" msgstr "" -#: fdmprinter.def.json -msgctxt "infill_pattern option concentric_3d" -msgid "Concentric 3D" -msgstr "" - #: fdmprinter.def.json msgctxt "infill_pattern option zigzag" msgid "Zig Zag" @@ -1712,6 +1755,19 @@ msgid "" "of material used." msgstr "" +#: fdmprinter.def.json +msgctxt "connect_infill_polygons label" +msgid "Connect Infill Polygons" +msgstr "" + +#: fdmprinter.def.json +msgctxt "connect_infill_polygons description" +msgid "" +"Connect infill paths where they run next to each other. For infill patterns " +"which consist of several closed polygons, enabling this setting greatly " +"reduces the travel time." +msgstr "" + #: fdmprinter.def.json msgctxt "infill_angles label" msgid "Infill Line Directions" @@ -1748,6 +1804,35 @@ msgctxt "infill_offset_y description" msgid "The infill pattern is moved this distance along the Y axis." msgstr "" +#: fdmprinter.def.json +msgctxt "infill_multiplier label" +msgid "Infill Line Multiplier" +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_multiplier description" +msgid "" +"Convert each infill line to this many lines. The extra lines do not cross " +"over each other, but avoid each other. This makes the infill stiffer, but " +"increases print time and material usage." +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_wall_line_count label" +msgid "Extra Infill Wall Count" +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_wall_line_count description" +msgid "" +"Add extra walls around the infill area. Such walls can make top/bottom skin " +"lines sag down less which means you need less top/bottom skin layers for the " +"same quality at the cost of some extra material.\n" +"This feature can combine with the Connect Infill Polygons to connect all the " +"infill into a single extrusion path without the need for travels or " +"retractions if configured right." +msgstr "" + #: fdmprinter.def.json msgctxt "sub_div_rad_add label" msgid "Cubic Subdivision Shell" @@ -2139,18 +2224,6 @@ msgctxt "material_bed_temperature_layer_0 description" msgid "The temperature used for the heated build plate at the first layer." msgstr "" -#: fdmprinter.def.json -msgctxt "material_diameter label" -msgid "Diameter" -msgstr "" - -#: fdmprinter.def.json -msgctxt "material_diameter description" -msgid "" -"Adjusts the diameter of the filament used. Match this value with the " -"diameter of the used filament." -msgstr "" - #: fdmprinter.def.json msgctxt "material_adhesion_tendency label" msgid "Adhesion Tendency" @@ -3106,7 +3179,9 @@ msgid "" "results in slightly longer travel moves but reduces the need for " "retractions. If combing is off, the material will retract and the nozzle " "moves in a straight line to the next point. It is also possible to avoid " -"combing over top/bottom skin areas by combing within the infill only." +"combing over top/bottom skin areas and also to only comb within the infill. " +"Note that the 'Within Infill' option behaves exactly like the 'Not in Skin' " +"option in earlier Cura releases." msgstr "" #: fdmprinter.def.json @@ -3124,6 +3199,11 @@ msgctxt "retraction_combing option noskin" msgid "Not in Skin" msgstr "" +#: fdmprinter.def.json +msgctxt "retraction_combing option infill" +msgid "Within Infill" +msgstr "" + #: fdmprinter.def.json msgctxt "retraction_combing_max_distance label" msgid "Max Comb Distance With No Retract" @@ -3581,11 +3661,6 @@ msgctxt "support_pattern option concentric" msgid "Concentric" msgstr "" -#: fdmprinter.def.json -msgctxt "support_pattern option concentric_3d" -msgid "Concentric 3D" -msgstr "" - #: fdmprinter.def.json msgctxt "support_pattern option zigzag" msgid "Zig Zag" @@ -3658,6 +3733,30 @@ msgid "" "calculated by the support density." msgstr "" +#: fdmprinter.def.json +msgctxt "support_initial_layer_line_distance label" +msgid "Initial Layer Support Line Distance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_initial_layer_line_distance description" +msgid "" +"Distance between the printed initial layer support structure lines. This " +"setting is calculated by the support density." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_infill_angle label" +msgid "Support Infill Line Direction" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_infill_angle description" +msgid "" +"Orientation of the infill pattern for supports. The support infill pattern " +"is rotated in the horizontal plane." +msgstr "" + #: fdmprinter.def.json msgctxt "support_z_distance label" msgid "Support Z Distance" @@ -4005,11 +4104,6 @@ msgctxt "support_interface_pattern option concentric" msgid "Concentric" msgstr "" -#: fdmprinter.def.json -msgctxt "support_interface_pattern option concentric_3d" -msgid "Concentric 3D" -msgstr "" - #: fdmprinter.def.json msgctxt "support_interface_pattern option zigzag" msgid "Zig Zag" @@ -4045,11 +4139,6 @@ msgctxt "support_roof_pattern option concentric" msgid "Concentric" msgstr "" -#: fdmprinter.def.json -msgctxt "support_roof_pattern option concentric_3d" -msgid "Concentric 3D" -msgstr "" - #: fdmprinter.def.json msgctxt "support_roof_pattern option zigzag" msgid "Zig Zag" @@ -4086,13 +4175,32 @@ msgid "Concentric" msgstr "" #: fdmprinter.def.json -msgctxt "support_bottom_pattern option concentric_3d" -msgid "Concentric 3D" +msgctxt "support_bottom_pattern option zigzag" +msgid "Zig Zag" msgstr "" #: fdmprinter.def.json -msgctxt "support_bottom_pattern option zigzag" -msgid "Zig Zag" +msgctxt "support_fan_enable label" +msgid "Fan Speed Override" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_fan_enable description" +msgid "" +"When enabled, the print cooling fan speed is altered for the skin regions " +"immediately above the support." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_supported_skin_fan_speed label" +msgid "Supported Skin Fan Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_supported_skin_fan_speed description" +msgid "" +"Percentage fan speed to use when printing the skin regions immediately above " +"the support. Using a high fan speed can make the support easier to remove." msgstr "" #: fdmprinter.def.json @@ -4487,7 +4595,7 @@ msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_spacing label" -msgid "Raft Line Spacing" +msgid "Raft Base Line Spacing" msgstr "" #: fdmprinter.def.json @@ -4720,18 +4828,6 @@ msgid "" "enough material." msgstr "" -#: fdmprinter.def.json -msgctxt "prime_tower_wall_thickness label" -msgid "Prime Tower Thickness" -msgstr "" - -#: fdmprinter.def.json -msgctxt "prime_tower_wall_thickness description" -msgid "" -"The thickness of the hollow prime tower. A thickness larger than half the " -"Prime Tower Minimum Volume will result in a dense prime tower." -msgstr "" - #: fdmprinter.def.json msgctxt "prime_tower_position_x label" msgid "Prime Tower X Position" @@ -4776,32 +4872,6 @@ msgid "" "the other nozzle off on the prime tower." msgstr "" -#: fdmprinter.def.json -msgctxt "dual_pre_wipe label" -msgid "Wipe Nozzle After Switch" -msgstr "" - -#: fdmprinter.def.json -msgctxt "dual_pre_wipe description" -msgid "" -"After switching extruder, wipe the oozed material off of the nozzle on the " -"first thing printed. This performs a safe slow wipe move at a place where " -"the oozed material causes least harm to the surface quality of your print." -msgstr "" - -#: fdmprinter.def.json -msgctxt "prime_tower_purge_volume label" -msgid "Prime Tower Purge Volume" -msgstr "" - -#: fdmprinter.def.json -msgctxt "prime_tower_purge_volume description" -msgid "" -"Amount of filament to be purged when wiping on the prime tower. Purging is " -"useful for compensating the filament lost by oozing during inactivity of the " -"nozzle." -msgstr "" - #: fdmprinter.def.json msgctxt "ooze_shield_enabled label" msgid "Enable Ooze Shield" @@ -5402,6 +5472,20 @@ msgid "" "Celsius)." msgstr "" +#: fdmprinter.def.json +msgctxt "minimum_polygon_circumference label" +msgid "Minimum Polygon Circumference" +msgstr "" + +#: fdmprinter.def.json +msgctxt "minimum_polygon_circumference description" +msgid "" +"Polygons in sliced layers that have a circumference smaller than this amount " +"will be filtered out. Lower values lead to higher resolution mesh at the " +"cost of slicing time. It is meant mostly for high resolution SLA printers " +"and very tiny 3D models with a lot of details." +msgstr "" + #: fdmprinter.def.json msgctxt "meshfix_maximum_resolution label" msgid "Maximum Resolution" @@ -6203,6 +6287,30 @@ msgid "" "the tan of the steepest slope in a layer." msgstr "" +#: fdmprinter.def.json +msgctxt "wall_overhang_angle label" +msgid "Overhanging Wall Angle" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_overhang_angle description" +msgid "" +"Walls that overhang more than this angle will be printed using overhanging " +"wall settings. When the value is 90, no walls will be treated as overhanging." +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_overhang_speed_factor label" +msgid "Overhanging Wall Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_overhang_speed_factor description" +msgid "" +"Overhanging walls will be printed at this percentage of their normal print " +"speed." +msgstr "" + #: fdmprinter.def.json msgctxt "bridge_settings_enabled label" msgid "Enable Bridge Settings" @@ -6241,22 +6349,6 @@ msgid "" "skin settings." msgstr "" -#: fdmprinter.def.json -msgctxt "bridge_wall_max_overhang label" -msgid "Bridge Wall Max Overhang" -msgstr "" - -#: fdmprinter.def.json -msgctxt "bridge_wall_max_overhang description" -msgid "" -"The maximum allowed width of the region of air below a wall line before the " -"wall is printed using bridge settings. Expressed as a percentage of the wall " -"line width. When the air gap is wider than this, the wall line is printed " -"using the bridge settings. Otherwise, the wall line is printed using the " -"normal settings. The lower the value, the more likely it is that overhung " -"wall lines will be printed using bridge settings." -msgstr "" - #: fdmprinter.def.json msgctxt "bridge_wall_coast label" msgid "Bridge Wall Coasting" -- cgit v1.2.3