From 1cb109d192189afcfd236907d40c5a19465c0070 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Tue, 21 Nov 2017 16:42:42 +0100 Subject: Update translation templates for Cura 3.1 Generated by calling 'make extract-messages'. This commit introduces a string freeze for Cura 3.1. Contributes to issue CURA-4601. --- resources/i18n/fdmprinter.def.json.pot | 481 ++++++++++++++++++++------------- 1 file changed, 296 insertions(+), 185 deletions(-) (limited to 'resources/i18n/fdmprinter.def.json.pot') diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index 460e508eb9..9d5ef93fc3 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -5,7 +5,7 @@ # msgid "" msgstr "" -"Project-Id-Version: Cura 3.0\n" +"Project-Id-Version: Cura 3.1\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" @@ -651,6 +651,38 @@ msgid "" "adhesion to the build plate easier." msgstr "" +#: fdmprinter.def.json +msgctxt "slicing_tolerance label" +msgid "Slicing Tolerance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "slicing_tolerance description" +msgid "" +"How to slice layers with diagonal surfaces. The areas of a layer can be " +"generated based on where the middle of the layer intersects the surface " +"(Middle). Alternatively each layer can have the areas which fall inside of " +"the volume throughout the height of the layer (Exclusive) or a layer has the " +"areas which fall inside anywhere within the layer (Inclusive). Exclusive " +"retains the most details, Inclusive makes for the best fit and Middle takes " +"the least time to process." +msgstr "" + +#: fdmprinter.def.json +msgctxt "slicing_tolerance option middle" +msgid "Middle" +msgstr "" + +#: fdmprinter.def.json +msgctxt "slicing_tolerance option exclusive" +msgid "Exclusive" +msgstr "" + +#: fdmprinter.def.json +msgctxt "slicing_tolerance option inclusive" +msgid "Inclusive" +msgstr "" + #: fdmprinter.def.json msgctxt "line_width label" msgid "Line Width" @@ -809,6 +841,18 @@ msgctxt "shell description" msgid "Shell" msgstr "" +#: fdmprinter.def.json +msgctxt "wall_extruder_nr label" +msgid "Wall Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "wall_extruder_nr description" +msgid "" +"The extruder train used for printing the walls. This is used in multi-" +"extrusion." +msgstr "" + #: fdmprinter.def.json msgctxt "wall_0_extruder_nr label" msgid "Outer Wall Extruder" @@ -823,7 +867,7 @@ msgstr "" #: fdmprinter.def.json msgctxt "wall_x_extruder_nr label" -msgid "Inner Walls Extruder" +msgid "Inner Wall Extruder" msgstr "" #: fdmprinter.def.json @@ -1339,6 +1383,117 @@ msgid "" "material." msgstr "" +#: fdmprinter.def.json +msgctxt "ironing_enabled label" +msgid "Enable Ironing" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_enabled description" +msgid "" +"Go over the top surface one additional time, but without extruding material. " +"This is meant to melt the plastic on top further, creating a smoother " +"surface." +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_only_highest_layer label" +msgid "Iron Only Highest Layer" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_only_highest_layer description" +msgid "" +"Only perform ironing on the very last layer of the mesh. This saves time if " +"the lower layers don't need a smooth surface finish." +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_pattern label" +msgid "Ironing Pattern" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_pattern description" +msgid "The pattern to use for ironing top surfaces." +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_pattern option concentric" +msgid "Concentric" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_pattern option zigzag" +msgid "Zig Zag" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_line_spacing label" +msgid "Ironing Line Spacing" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_line_spacing description" +msgid "The distance between the lines of ironing." +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_flow label" +msgid "Ironing Flow" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_flow description" +msgid "" +"The amount of material, relative to a normal skin line, to extrude during " +"ironing. Keeping the nozzle filled helps filling some of the crevices of the " +"top surface, but too much results in overextrusion and blips on the side of " +"the surface." +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_inset label" +msgid "Ironing Inset" +msgstr "" + +#: fdmprinter.def.json +msgctxt "ironing_inset description" +msgid "" +"A distance to keep from the edges of the model. Ironing all the way to the " +"edge of the mesh may result in a jagged edge on your print." +msgstr "" + +#: fdmprinter.def.json +msgctxt "speed_ironing label" +msgid "Ironing Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "speed_ironing description" +msgid "The speed at which to pass over the top surface." +msgstr "" + +#: fdmprinter.def.json +msgctxt "acceleration_ironing label" +msgid "Ironing Acceleration" +msgstr "" + +#: fdmprinter.def.json +msgctxt "acceleration_ironing description" +msgid "The acceleration with which ironing is performed." +msgstr "" + +#: fdmprinter.def.json +msgctxt "jerk_ironing label" +msgid "Ironing Jerk" +msgstr "" + +#: fdmprinter.def.json +msgctxt "jerk_ironing description" +msgid "The maximum instantaneous velocity change while performing ironing." +msgstr "" + #: fdmprinter.def.json msgctxt "infill label" msgid "Infill" @@ -1392,9 +1547,10 @@ msgctxt "infill_pattern description" msgid "" "The pattern of the infill material of the print. The line and zig zag infill " "swap direction on alternate layers, reducing material cost. The grid, " -"triangle, cubic, octet, quarter cubic and concentric patterns are fully " -"printed every layer. Cubic, quarter cubic and octet infill change with every " -"layer to provide a more equal distribution of strength over each direction." +"triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric " +"patterns are fully printed every layer. Cubic, quarter cubic and octet " +"infill change with every layer to provide a more equal distribution of " +"strength over each direction." msgstr "" #: fdmprinter.def.json @@ -1412,6 +1568,11 @@ msgctxt "infill_pattern option triangles" msgid "Triangles" msgstr "" +#: fdmprinter.def.json +msgctxt "infill_pattern option trihexagon" +msgid "Tri-Hexagon" +msgstr "" + #: fdmprinter.def.json msgctxt "infill_pattern option cubic" msgid "Cubic" @@ -1465,9 +1626,9 @@ msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "" -"Connect the ends where the infill pattern meets the inner wall using a lines " +"Connect the ends where the infill pattern meets the inner wall using a line " "which follows the shape of the inner wall. Enabling this setting can make " -"the infill adhere to the walls better and reduces the effects on infill on " +"the infill adhere to the walls better and reduce the effects of infill on " "the quality of vertical surfaces. Disabling this setting reduces the amount " "of material used." msgstr "" @@ -1488,6 +1649,26 @@ msgid "" "lines and zig zag patterns and 45 degrees for all other patterns)." msgstr "" +#: fdmprinter.def.json +msgctxt "infill_offset_x label" +msgid "Infill X Offset" +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_offset_x description" +msgid "The infill pattern is offset this distance along the X axis." +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_offset_y label" +msgid "Infill Y Offset" +msgstr "" + +#: fdmprinter.def.json +msgctxt "infill_offset_y description" +msgid "The infill pattern is offset this distance along the Y axis." +msgstr "" + #: fdmprinter.def.json msgctxt "sub_div_rad_add label" msgid "Cubic Subdivision Shell" @@ -1875,6 +2056,26 @@ msgid "" "diameter of the used filament." msgstr "" +#: fdmprinter.def.json +msgctxt "material_adhesion_tendency label" +msgid "Adhesion Tendency" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_adhesion_tendency description" +msgid "Surface adhesion tendency." +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_surface_energy label" +msgid "Surface Energy" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_surface_energy description" +msgid "Surface energy." +msgstr "" + #: fdmprinter.def.json msgctxt "material_flow label" msgid "Flow" @@ -3253,42 +3454,6 @@ msgid "" "structure." msgstr "" -#: fdmprinter.def.json -msgctxt "support_skip_some_zags label" -msgid "Break Up Support In Chunks" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_skip_some_zags description" -msgid "" -"Skip some support line connections to make the support structure easier to " -"break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_skip_zag_per_mm label" -msgid "Support Chunk Size" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_skip_zag_per_mm description" -msgid "" -"Leave out a connection between support lines once every N millimeter to make " -"the support structure easier to break away." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_zag_skip_count label" -msgid "Support Chunk Line Count" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_zag_skip_count description" -msgid "" -"Skip one in every N connection lines to make the support structure easier to " -"break away." -msgstr "" - #: fdmprinter.def.json msgctxt "support_infill_rate label" msgid "Support Density" @@ -3913,7 +4078,7 @@ msgstr "" msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" -"This is the minimum distance, multiple skirt lines will extend outwards from " +"This is the minimum distance. Multiple skirt lines will extend outwards from " "this distance." msgstr "" @@ -3969,32 +4134,6 @@ msgid "" "that much." msgstr "" -#: fdmprinter.def.json -msgctxt "z_offset_layer_0 label" -msgid "Initial Layer Z Offset" -msgstr "" - -#: fdmprinter.def.json -msgctxt "z_offset_layer_0 description" -msgid "" -"The extruder is offset from the normal height of the first layer by this " -"amount. It can be positive (raised) or negative (lowered). Some filament " -"types adhere to the build plate better if the extruder is raised slightly." -msgstr "" - -#: fdmprinter.def.json -msgctxt "z_offset_taper_layers label" -msgid "Z Offset Taper Layers" -msgstr "" - -#: fdmprinter.def.json -msgctxt "z_offset_taper_layers description" -msgid "" -"When non-zero, the Z offset is reduced to 0 over that many layers. A value " -"of 0 means that the Z offset remains constant for all the layers in the " -"print." -msgstr "" - #: fdmprinter.def.json msgctxt "raft_margin label" msgid "Raft Extra Margin" @@ -4016,10 +4155,10 @@ msgstr "" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "" -"This setting control how much inner corners in the raft outline are rounded. " -"Inward corners are rounded to a semi circle with a radius equal to the value " -"given here. This setting also removes holes in the raft outline which are " -"smaller than such a circle." +"This setting controls how much inner corners in the raft outline are " +"rounded. Inward corners are rounded to a semi circle with a radius equal to " +"the value given here. This setting also removes holes in the raft outline " +"which are smaller than such a circle." msgstr "" #: fdmprinter.def.json @@ -4560,6 +4699,20 @@ msgid "" "everything else fails to produce proper GCode." msgstr "" +#: fdmprinter.def.json +msgctxt "meshfix_maximum_resolution label" +msgid "Maximum Resolution" +msgstr "" + +#: fdmprinter.def.json +msgctxt "meshfix_maximum_resolution description" +msgid "" +"The minimum size of a line segment after slicing. If you increase this, the " +"mesh will have a lower resolution. This may allow the printer to keep up " +"with the speed it has to process g-code and will increase slice speed by " +"removing details of the mesh that it can't process anyway." +msgstr "" + #: fdmprinter.def.json msgctxt "multiple_mesh_overlap label" msgid "Merged Meshes Overlap" @@ -4598,6 +4751,19 @@ msgid "" "is removed from the other meshes." msgstr "" +#: fdmprinter.def.json +msgctxt "remove_empty_first_layers label" +msgid "Remove Empty First Layers" +msgstr "" + +#: fdmprinter.def.json +msgctxt "remove_empty_first_layers description" +msgid "" +"Remove empty layers beneath the first printed layer if they are present. " +"Disabling this setting can cause empty first layers if the Slicing Tolerance " +"setting is set to Exclusive or Middle." +msgstr "" + #: fdmprinter.def.json msgctxt "blackmagic label" msgid "Special Modes" @@ -4852,6 +5018,42 @@ msgid "" "time estimates with and without optimization." msgstr "" +#: fdmprinter.def.json +msgctxt "support_skip_some_zags label" +msgid "Break Up Support In Chunks" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_skip_some_zags description" +msgid "" +"Skip some support line connections to make the support structure easier to " +"break away. This setting is applicable to the Zig Zag support infill pattern." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_skip_zag_per_mm label" +msgid "Support Chunk Size" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_skip_zag_per_mm description" +msgid "" +"Leave out a connection between support lines once every N millimeter to make " +"the support structure easier to break away." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_zag_skip_count label" +msgid "Support Chunk Line Count" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_zag_skip_count description" +msgid "" +"Skip one in every N connection lines to make the support structure easier to " +"break away." +msgstr "" + #: fdmprinter.def.json msgctxt "draft_shield_enabled label" msgid "Enable Draft Shield" @@ -5210,6 +5412,26 @@ msgid "" "higher than half the Fuzzy Skin Thickness." msgstr "" +#: fdmprinter.def.json +msgctxt "flow_rate_max_extrusion_offset label" +msgid "Flow rate compensation max extrusion offset" +msgstr "" + +#: fdmprinter.def.json +msgctxt "flow_rate_max_extrusion_offset description" +msgid "The maximum distance in mm to compensate." +msgstr "" + +#: fdmprinter.def.json +msgctxt "flow_rate_extrusion_offset_factor label" +msgid "Flow rate compensation factor" +msgstr "" + +#: fdmprinter.def.json +msgctxt "flow_rate_extrusion_offset_factor description" +msgid "The multiplication factor for the flow rate -> distance translation." +msgstr "" + #: fdmprinter.def.json msgctxt "wireframe_enabled label" msgid "Wire Printing" @@ -5523,117 +5745,6 @@ msgid "" "applies to Wire Printing." msgstr "" -#: fdmprinter.def.json -msgctxt "ironing_enabled label" -msgid "Enable Ironing" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_enabled description" -msgid "" -"Go over the top surface one additional time, but without extruding material. " -"This is meant to melt the plastic on top further, creating a smoother " -"surface." -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_only_highest_layer label" -msgid "Iron Only Highest Layer" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_only_highest_layer description" -msgid "" -"Only perform ironing on the very last layer of the mesh. This saves time if " -"the lower layers don't need a smooth surface finish." -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_pattern label" -msgid "Ironing Pattern" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_pattern description" -msgid "The pattern to use for ironing top surfaces." -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_pattern option concentric" -msgid "Concentric" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_pattern option zigzag" -msgid "Zig Zag" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_line_spacing label" -msgid "Ironing Line Spacing" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_line_spacing description" -msgid "The distance between the lines of ironing." -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_flow label" -msgid "Ironing Flow" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_flow description" -msgid "" -"The amount of material, relative to a normal skin line, to extrude during " -"ironing. Keeping the nozzle filled helps filling some of the crevices of the " -"top surface, but too much results in overextrusion and blips on the side of " -"the surface." -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_inset label" -msgid "Ironing Inset" -msgstr "" - -#: fdmprinter.def.json -msgctxt "ironing_inset description" -msgid "" -"A distance to keep from the edges of the model. Ironing all the way to the " -"edge of the mesh may result in a jagged edge on your print." -msgstr "" - -#: fdmprinter.def.json -msgctxt "speed_ironing label" -msgid "Ironing Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "speed_ironing description" -msgid "The speed at which to pass over the top surface." -msgstr "" - -#: fdmprinter.def.json -msgctxt "acceleration_ironing label" -msgid "Ironing Acceleration" -msgstr "" - -#: fdmprinter.def.json -msgctxt "acceleration_ironing description" -msgid "The acceleration with which ironing is performed." -msgstr "" - -#: fdmprinter.def.json -msgctxt "jerk_ironing label" -msgid "Ironing Jerk" -msgstr "" - -#: fdmprinter.def.json -msgctxt "jerk_ironing description" -msgid "The maximum instantaneous velocity change while performing ironing." -msgstr "" - #: fdmprinter.def.json msgctxt "command_line_settings label" msgid "Command Line Settings" -- cgit v1.2.3