From 4759bccdb8261948ae8d745b0838c6e244e88855 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Thu, 27 Oct 2016 11:31:07 +0200 Subject: Update translation templates after merging secret plug-ins The UM3 Network Printing plug-in was secret because the UM3 wasn't released yet. This update contains all texts to be translated as of this writing. --- resources/i18n/fdmprinter.def.json.pot | 250 ++++++++++++++++++--------------- 1 file changed, 139 insertions(+), 111 deletions(-) (limited to 'resources/i18n/fdmprinter.def.json.pot') diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index e338ae2882..d65b1a10de 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Uranium json setting files\n" "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n" -"POT-Creation-Date: 2016-09-20 14:48+0000\n" +"POT-Creation-Date: 2016-10-27 11:28+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE\n" @@ -815,6 +815,20 @@ msgid "" "outside of the model." msgstr "" +#: fdmprinter.def.json +msgctxt "outer_inset_first label" +msgid "Outer Before Inner Walls" +msgstr "" + +#: fdmprinter.def.json +msgctxt "outer_inset_first description" +msgid "" +"Prints walls in order of outside to inside when enabled. This can help " +"improve dimensional accuracy in X and Y when using a high viscosity plastic " +"like ABS; however it can decrease outer surface print quality, especially on " +"overhangs." +msgstr "" + #: fdmprinter.def.json msgctxt "alternate_extra_perimeter label" msgid "Alternate Extra Wall" @@ -1310,42 +1324,6 @@ msgid "" "material is limited." msgstr "" -#: fdmprinter.def.json -msgctxt "retraction_hop_enabled label" -msgid "Z Hop when Retracted" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop_enabled description" -msgid "" -"Whenever a retraction is done, the build plate is lowered to create " -"clearance between the nozzle and the print. It prevents the nozzle from " -"hitting the print during travel moves, reducing the chance to knock the " -"print from the build plate." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop_only_when_collides label" -msgid "Z Hop Only Over Printed Parts" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop_only_when_collides description" -msgid "" -"Only perform a Z Hop when moving over printed parts which cannot be avoided " -"by horizontal motion by Avoid Printed Parts when Traveling." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop label" -msgid "Z Hop Height" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop description" -msgid "The height difference when performing a Z Hop." -msgstr "" - #: fdmprinter.def.json msgctxt "material_standby_temperature label" msgid "Standby Temperature" @@ -1405,19 +1383,6 @@ msgid "" "retraction." msgstr "" -#: fdmprinter.def.json -msgctxt "retraction_hop_after_extruder_switch label" -msgid "Z Hop After Extruder Switch" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_hop_after_extruder_switch description" -msgid "" -"After the machine switched from one extruder to the other, the build plate " -"is lowered to create clearance between the nozzle and the print. This " -"prevents the nozzle from leaving oozed material on the outside of a print." -msgstr "" - #: fdmprinter.def.json msgctxt "speed label" msgid "Speed" @@ -2070,6 +2035,55 @@ msgid "" "during travel moves." msgstr "" +#: fdmprinter.def.json +msgctxt "retraction_hop_enabled label" +msgid "Z Hop when Retracted" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop_enabled description" +msgid "" +"Whenever a retraction is done, the build plate is lowered to create " +"clearance between the nozzle and the print. It prevents the nozzle from " +"hitting the print during travel moves, reducing the chance to knock the " +"print from the build plate." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop_only_when_collides label" +msgid "Z Hop Only Over Printed Parts" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop_only_when_collides description" +msgid "" +"Only perform a Z Hop when moving over printed parts which cannot be avoided " +"by horizontal motion by Avoid Printed Parts when Traveling." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop label" +msgid "Z Hop Height" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop description" +msgid "The height difference when performing a Z Hop." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop_after_extruder_switch label" +msgid "Z Hop After Extruder Switch" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_hop_after_extruder_switch description" +msgid "" +"After the machine switched from one extruder to the other, the build plate " +"is lowered to create clearance between the nozzle and the print. This " +"prevents the nozzle from leaving oozed material on the outside of a print." +msgstr "" + #: fdmprinter.def.json msgctxt "cooling label" msgid "Cooling" @@ -2176,7 +2190,9 @@ msgctxt "cool_min_layer_time description" msgid "" "The minimum time spent in a layer. This forces the printer to slow down, to " "at least spend the time set here in one layer. This allows the printed " -"material to cool down properly before printing the next layer." +"material to cool down properly before printing the next layer. Layers may " +"still take shorter than the minimal layer time if Lift Head is disabled and " +"if the Minimum Speed would otherwise be violated." msgstr "" #: fdmprinter.def.json @@ -2227,6 +2243,54 @@ msgid "" "severe overhangs." msgstr "" +#: fdmprinter.def.json +msgctxt "support_extruder_nr label" +msgid "Support Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_extruder_nr description" +msgid "" +"The extruder train to use for printing the support. This is used in multi-" +"extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_infill_extruder_nr label" +msgid "Support Infill Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_infill_extruder_nr description" +msgid "" +"The extruder train to use for printing the infill of the support. This is " +"used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_extruder_nr_layer_0 label" +msgid "First Layer Support Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_extruder_nr_layer_0 description" +msgid "" +"The extruder train to use for printing the first layer of support infill. " +"This is used in multi-extrusion." +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_interface_extruder_nr label" +msgid "Support Interface Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "support_interface_extruder_nr description" +msgid "" +"The extruder train to use for printing the roofs and bottoms of the support. " +"This is used in multi-extrusion." +msgstr "" + #: fdmprinter.def.json msgctxt "support_type label" msgid "Support Placement" @@ -2687,6 +2751,18 @@ msgctxt "adhesion_type option raft" msgid "Raft" msgstr "" +#: fdmprinter.def.json +msgctxt "adhesion_extruder_nr label" +msgid "Build Plate Adhesion Extruder" +msgstr "" + +#: fdmprinter.def.json +msgctxt "adhesion_extruder_nr description" +msgid "" +"The extruder train to use for printing the skirt/brim/raft. This is used in " +"multi-extrusion." +msgstr "" + #: fdmprinter.def.json msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3100,66 +3176,6 @@ msgctxt "dual description" msgid "Settings used for printing with multiple extruders." msgstr "" -#: fdmprinter.def.json -msgctxt "adhesion_extruder_nr label" -msgid "Build Plate Adhesion Extruder" -msgstr "" - -#: fdmprinter.def.json -msgctxt "adhesion_extruder_nr description" -msgid "" -"The extruder train to use for printing the skirt/brim/raft. This is used in " -"multi-extrusion." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_extruder_nr label" -msgid "Support Extruder" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_extruder_nr description" -msgid "" -"The extruder train to use for printing the support. This is used in multi-" -"extrusion." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_infill_extruder_nr label" -msgid "Support Infill Extruder" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_infill_extruder_nr description" -msgid "" -"The extruder train to use for printing the infill of the support. This is " -"used in multi-extrusion." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_extruder_nr_layer_0 label" -msgid "First Layer Support Extruder" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_extruder_nr_layer_0 description" -msgid "" -"The extruder train to use for printing the first layer of support infill. " -"This is used in multi-extrusion." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_interface_extruder_nr label" -msgid "Support Interface Extruder" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_interface_extruder_nr description" -msgid "" -"The extruder train to use for printing the roofs and bottoms of the support. " -"This is used in multi-extrusion." -msgstr "" - #: fdmprinter.def.json msgctxt "prime_tower_enable label" msgid "Enable Prime Tower" @@ -3336,6 +3352,18 @@ msgid "" "everything else fails to produce proper GCode." msgstr "" +#: fdmprinter.def.json +msgctxt "carve_multiple_volumes label" +msgid "Remove Mesh Intersection" +msgstr "" + +#: fdmprinter.def.json +msgctxt "carve_multiple_volumes description" +msgid "" +"Remove areas where multiple objecs are overlapping with each other. This is " +"may be used if merged dual material objects overlap with each other." +msgstr "" + #: fdmprinter.def.json msgctxt "blackmagic label" msgid "Special Modes" -- cgit v1.2.3