From 850f14f14a4d13ebb39103212a90230acb6f1002 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Fri, 7 Feb 2020 14:21:27 +0100 Subject: Update translation templates for Cura 4.5 These are the new texts to be translated this release. Obtained by executing the extract-messages target of CMake. Contributes to issue CURA-7201. --- resources/i18n/fdmprinter.def.json.pot | 580 +++++++++++++++++++-------------- 1 file changed, 343 insertions(+), 237 deletions(-) (limited to 'resources/i18n/fdmprinter.def.json.pot') diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index 89ff364e2d..a8de37f445 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Uranium json setting files\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" -"POT-Creation-Date: 2019-11-05 13:13+0000\n" +"POT-Creation-Date: 2020-02-07 14:19+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE\n" @@ -437,6 +437,18 @@ msgid "" "property in G1 commands to retract the material." msgstr "" +#: fdmprinter.def.json +msgctxt "machine_extruders_share_heater label" +msgid "Extruders Share Heater" +msgstr "" + +#: fdmprinter.def.json +msgctxt "machine_extruders_share_heater description" +msgid "" +"Whether the extruders share a single heater rather than each extruder having " +"its own heater." +msgstr "" + #: fdmprinter.def.json msgctxt "machine_disallowed_areas label" msgid "Disallowed Areas" @@ -457,16 +469,6 @@ msgctxt "nozzle_disallowed_areas description" msgid "A list of polygons with areas the nozzle is not allowed to enter." msgstr "" -#: fdmprinter.def.json -msgctxt "machine_head_polygon label" -msgid "Machine Head Polygon" -msgstr "" - -#: fdmprinter.def.json -msgctxt "machine_head_polygon description" -msgid "A 2D silhouette of the print head (fan caps excluded)." -msgstr "" - #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon label" msgid "Machine Head & Fan Polygon" @@ -2215,6 +2217,26 @@ msgid "" "to the vertical." msgstr "" +#: fdmprinter.def.json +msgctxt "skin_edge_support_thickness label" +msgid "Skin Edge Support Thickness" +msgstr "" + +#: fdmprinter.def.json +msgctxt "skin_edge_support_thickness description" +msgid "The thickness of the extra infill that supports skin edges." +msgstr "" + +#: fdmprinter.def.json +msgctxt "skin_edge_support_layers label" +msgid "Skin Edge Support Layers" +msgstr "" + +#: fdmprinter.def.json +msgctxt "skin_edge_support_layers description" +msgid "The number of infill layers that supports skin edges." +msgstr "" + #: fdmprinter.def.json msgctxt "material label" msgid "Material" @@ -2430,6 +2452,18 @@ msgid "" "retraction." msgstr "" +#: fdmprinter.def.json +msgctxt "material_break_preparation_temperature label" +msgid "Break Preparation Temperature" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_break_preparation_temperature description" +msgid "" +"The temperature used to purge material, should be roughly equal to the " +"highest possible printing temperature." +msgstr "" + #: fdmprinter.def.json msgctxt "material_break_retracted_position label" msgid "Break Retracted Position" @@ -2461,6 +2495,66 @@ msgctxt "material_break_temperature description" msgid "The temperature at which the filament is broken for a clean break." msgstr "" +#: fdmprinter.def.json +msgctxt "material_flush_purge_speed label" +msgid "Flush Purge Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_flush_purge_speed description" +msgid "Material Station internal value" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_flush_purge_length label" +msgid "Flush Purge Length" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_flush_purge_length description" +msgid "Material Station internal value" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_end_of_filament_purge_speed label" +msgid "End Of Filament Purge Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_end_of_filament_purge_speed description" +msgid "Material Station internal value" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_end_of_filament_purge_length label" +msgid "End Of Filament Purge Length" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_end_of_filament_purge_length description" +msgid "Material Station internal value" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_maximum_park_duration label" +msgid "Maximum Park Duration" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_maximum_park_duration description" +msgid "Material Station internal value" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_no_load_move_factor label" +msgid "No Load Move Factor" +msgstr "" + +#: fdmprinter.def.json +msgctxt "material_no_load_move_factor description" +msgid "Material Station internal value" +msgstr "" + #: fdmprinter.def.json msgctxt "material_flow label" msgid "Flow" @@ -2606,134 +2700,6 @@ msgid "" "the initial layer is multiplied by this value." msgstr "" -#: fdmprinter.def.json -msgctxt "retraction_enable label" -msgid "Enable Retraction" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_enable description" -msgid "" -"Retract the filament when the nozzle is moving over a non-printed area. " -msgstr "" - -#: fdmprinter.def.json -msgctxt "retract_at_layer_change label" -msgid "Retract at Layer Change" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retract_at_layer_change description" -msgid "Retract the filament when the nozzle is moving to the next layer." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_amount label" -msgid "Retraction Distance" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_amount description" -msgid "The length of material retracted during a retraction move." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_speed label" -msgid "Retraction Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_speed description" -msgid "" -"The speed at which the filament is retracted and primed during a retraction " -"move." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_retract_speed label" -msgid "Retraction Retract Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_retract_speed description" -msgid "The speed at which the filament is retracted during a retraction move." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_prime_speed label" -msgid "Retraction Prime Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_prime_speed description" -msgid "The speed at which the filament is primed during a retraction move." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_extra_prime_amount label" -msgid "Retraction Extra Prime Amount" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_extra_prime_amount description" -msgid "" -"Some material can ooze away during a travel move, which can be compensated " -"for here." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_min_travel label" -msgid "Retraction Minimum Travel" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_min_travel description" -msgid "" -"The minimum distance of travel needed for a retraction to happen at all. " -"This helps to get fewer retractions in a small area." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_count_max label" -msgid "Maximum Retraction Count" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_count_max description" -msgid "" -"This setting limits the number of retractions occurring within the minimum " -"extrusion distance window. Further retractions within this window will be " -"ignored. This avoids retracting repeatedly on the same piece of filament, as " -"that can flatten the filament and cause grinding issues." -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_extrusion_window label" -msgid "Minimum Extrusion Distance Window" -msgstr "" - -#: fdmprinter.def.json -msgctxt "retraction_extrusion_window description" -msgid "" -"The window in which the maximum retraction count is enforced. This value " -"should be approximately the same as the retraction distance, so that " -"effectively the number of times a retraction passes the same patch of " -"material is limited." -msgstr "" - -#: fdmprinter.def.json -msgctxt "limit_support_retractions label" -msgid "Limit Support Retractions" -msgstr "" - -#: fdmprinter.def.json -msgctxt "limit_support_retractions description" -msgid "" -"Omit retraction when moving from support to support in a straight line. " -"Enabling this setting saves print time, but can lead to excessive stringing " -"within the support structure." -msgstr "" - #: fdmprinter.def.json msgctxt "material_standby_temperature label" msgid "Standby Temperature" @@ -2746,64 +2712,6 @@ msgid "" "printing." msgstr "" -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_amount label" -msgid "Nozzle Switch Retraction Distance" -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_amount description" -msgid "" -"The amount of retraction when switching extruders. Set to 0 for no " -"retraction at all. This should generally be the same as the length of the " -"heat zone." -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_speeds label" -msgid "Nozzle Switch Retraction Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_speeds description" -msgid "" -"The speed at which the filament is retracted. A higher retraction speed " -"works better, but a very high retraction speed can lead to filament grinding." -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_speed label" -msgid "Nozzle Switch Retract Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_retraction_speed description" -msgid "" -"The speed at which the filament is retracted during a nozzle switch retract." -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_prime_speed label" -msgid "Nozzle Switch Prime Speed" -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_prime_speed description" -msgid "" -"The speed at which the filament is pushed back after a nozzle switch " -"retraction." -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_extra_prime_amount label" -msgid "Nozzle Switch Extra Prime Amount" -msgstr "" - -#: fdmprinter.def.json -msgctxt "switch_extruder_extra_prime_amount description" -msgid "Extra material to prime after nozzle switching." -msgstr "" - #: fdmprinter.def.json msgctxt "speed label" msgid "Speed" @@ -3507,6 +3415,134 @@ msgctxt "travel description" msgid "travel" msgstr "" +#: fdmprinter.def.json +msgctxt "retraction_enable label" +msgid "Enable Retraction" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_enable description" +msgid "" +"Retract the filament when the nozzle is moving over a non-printed area. " +msgstr "" + +#: fdmprinter.def.json +msgctxt "retract_at_layer_change label" +msgid "Retract at Layer Change" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retract_at_layer_change description" +msgid "Retract the filament when the nozzle is moving to the next layer." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_amount label" +msgid "Retraction Distance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_amount description" +msgid "The length of material retracted during a retraction move." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_speed label" +msgid "Retraction Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_speed description" +msgid "" +"The speed at which the filament is retracted and primed during a retraction " +"move." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_retract_speed label" +msgid "Retraction Retract Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_retract_speed description" +msgid "The speed at which the filament is retracted during a retraction move." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_prime_speed label" +msgid "Retraction Prime Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_prime_speed description" +msgid "The speed at which the filament is primed during a retraction move." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_extra_prime_amount label" +msgid "Retraction Extra Prime Amount" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_extra_prime_amount description" +msgid "" +"Some material can ooze away during a travel move, which can be compensated " +"for here." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_min_travel label" +msgid "Retraction Minimum Travel" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_min_travel description" +msgid "" +"The minimum distance of travel needed for a retraction to happen at all. " +"This helps to get fewer retractions in a small area." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_count_max label" +msgid "Maximum Retraction Count" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_count_max description" +msgid "" +"This setting limits the number of retractions occurring within the minimum " +"extrusion distance window. Further retractions within this window will be " +"ignored. This avoids retracting repeatedly on the same piece of filament, as " +"that can flatten the filament and cause grinding issues." +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_extrusion_window label" +msgid "Minimum Extrusion Distance Window" +msgstr "" + +#: fdmprinter.def.json +msgctxt "retraction_extrusion_window description" +msgid "" +"The window in which the maximum retraction count is enforced. This value " +"should be approximately the same as the retraction distance, so that " +"effectively the number of times a retraction passes the same patch of " +"material is limited." +msgstr "" + +#: fdmprinter.def.json +msgctxt "limit_support_retractions label" +msgid "Limit Support Retractions" +msgstr "" + +#: fdmprinter.def.json +msgctxt "limit_support_retractions description" +msgid "" +"Omit retraction when moving from support to support in a straight line. " +"Enabling this setting saves print time, but can lead to excessive stringing " +"within the support structure." +msgstr "" + #: fdmprinter.def.json msgctxt "retraction_combing label" msgid "Combing Mode" @@ -4926,6 +4962,19 @@ msgid "" "build plate, but also reduces the effective print area." msgstr "" +#: fdmprinter.def.json +msgctxt "brim_gap label" +msgid "Brim Distance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "brim_gap description" +msgid "" +"The horizontal distance between the first brim line and the outline of the " +"first layer of the print. A small gap can make the brim easier to remove " +"while still providing the thermal benefits." +msgstr "" + #: fdmprinter.def.json msgctxt "brim_replaces_support label" msgid "Brim Replaces Support" @@ -5416,6 +5465,64 @@ msgctxt "ooze_shield_dist description" msgid "Distance of the ooze shield from the print, in the X/Y directions." msgstr "" +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_amount label" +msgid "Nozzle Switch Retraction Distance" +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_amount description" +msgid "" +"The amount of retraction when switching extruders. Set to 0 for no " +"retraction at all. This should generally be the same as the length of the " +"heat zone." +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_speeds label" +msgid "Nozzle Switch Retraction Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_speeds description" +msgid "" +"The speed at which the filament is retracted. A higher retraction speed " +"works better, but a very high retraction speed can lead to filament grinding." +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_speed label" +msgid "Nozzle Switch Retract Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_retraction_speed description" +msgid "" +"The speed at which the filament is retracted during a nozzle switch retract." +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_prime_speed label" +msgid "Nozzle Switch Prime Speed" +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_prime_speed description" +msgid "" +"The speed at which the filament is pushed back after a nozzle switch " +"retraction." +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_extra_prime_amount label" +msgid "Nozzle Switch Extra Prime Amount" +msgstr "" + +#: fdmprinter.def.json +msgctxt "switch_extruder_extra_prime_amount description" +msgid "Extra material to prime after nozzle switching." +msgstr "" + #: fdmprinter.def.json msgctxt "meshfix label" msgid "Mesh Fixes" @@ -5592,10 +5699,10 @@ msgstr "" msgctxt "print_sequence description" msgid "" "Whether to print all models one layer at a time or to wait for one model to " -"finish, before moving on to the next. One at a time mode is only possible if " -"all models are separated in such a way that the whole print head can move in " -"between and all models are lower than the distance between the nozzle and " -"the X/Y axes." +"finish, before moving on to the next. One at a time mode is possible if a) " +"only one extruder is enabled and b) all models are separated in such a way " +"that the whole print head can move in between and all models are lower than " +"the distance between the nozzle and the X/Y axes. " msgstr "" #: fdmprinter.def.json @@ -5877,30 +5984,6 @@ msgid "" "increases slicing time dramatically." msgstr "" -#: fdmprinter.def.json -msgctxt "support_tree_wall_thickness label" -msgid "Tree Support Wall Thickness" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_tree_wall_thickness description" -msgid "" -"The thickness of the walls of the branches of tree support. Thicker walls " -"take longer to print but don't fall over as easily." -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_tree_wall_count label" -msgid "Tree Support Wall Line Count" -msgstr "" - -#: fdmprinter.def.json -msgctxt "support_tree_wall_count description" -msgid "" -"The number of walls of the branches of tree support. Thicker walls take " -"longer to print but don't fall over as easily." -msgstr "" - #: fdmprinter.def.json msgctxt "slicing_tolerance label" msgid "Slicing Tolerance" @@ -6377,6 +6460,16 @@ msgid "" "rough and fuzzy look." msgstr "" +#: fdmprinter.def.json +msgctxt "magic_fuzzy_skin_outside_only label" +msgid "Fuzzy Skin Outside Only" +msgstr "" + +#: fdmprinter.def.json +msgctxt "magic_fuzzy_skin_outside_only description" +msgid "Jitter only the parts' outlines and not the parts' holes." +msgstr "" + #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_thickness label" msgid "Fuzzy Skin Thickness" @@ -6865,6 +6958,18 @@ msgid "" "skin settings." msgstr "" +#: fdmprinter.def.json +msgctxt "bridge_sparse_infill_max_density label" +msgid "Bridge Sparse Infill Max Density" +msgstr "" + +#: fdmprinter.def.json +msgctxt "bridge_sparse_infill_max_density description" +msgid "" +"Maximum density of infill considered to be sparse. Skin over sparse infill " +"is considered to be unsupported and so may be treated as a bridge skin." +msgstr "" + #: fdmprinter.def.json msgctxt "bridge_wall_coast label" msgid "Bridge Wall Coasting" @@ -7053,10 +7158,10 @@ msgstr "" #: fdmprinter.def.json msgctxt "clean_between_layers description" msgid "" -"Whether to include nozzle wipe G-Code between layers. Enabling this setting " -"could influence behavior of retract at layer change. Please use Wipe " -"Retraction settings to control retraction at layers where the wipe script " -"will be working." +"Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). " +"Enabling this setting could influence behavior of retract at layer change. " +"Please use Wipe Retraction settings to control retraction at layers where " +"the wipe script will be working." msgstr "" #: fdmprinter.def.json @@ -7067,8 +7172,10 @@ msgstr "" #: fdmprinter.def.json msgctxt "max_extrusion_before_wipe description" msgid "" -"Maximum material, that can be extruded before another nozzle wipe is " -"initiated." +"Maximum material that can be extruded before another nozzle wipe is " +"initiated. If this value is less than the volume of material required in a " +"layer, the setting has no effect in this layer, i.e. it is limited to one " +"wipe per layer." msgstr "" #: fdmprinter.def.json @@ -7129,7 +7236,7 @@ msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_prime_speed label" -msgid "Retraction Prime Speed" +msgid "Wipe Retraction Prime Speed" msgstr "" #: fdmprinter.def.json @@ -7150,16 +7257,15 @@ msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable label" -msgid "Wipe Z Hop When Retracted" +msgid "Wipe Z Hop" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable description" msgid "" -"Whenever a retraction is done, the build plate is lowered to create " -"clearance between the nozzle and the print. It prevents the nozzle from " -"hitting the print during travel moves, reducing the chance to knock the " -"print from the build plate." +"When wiping, the build plate is lowered to create clearance between the " +"nozzle and the print. It prevents the nozzle from hitting the print during " +"travel moves, reducing the chance to knock the print from the build plate." msgstr "" #: fdmprinter.def.json -- cgit v1.2.3