From 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 4 Sep 2019 09:23:27 +0200 Subject: Commit actual files instead of my symlinks I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git. Contributes to issue CURA-6742. --- .../um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg') diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..bc04462e00 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_tough_pla +variant = AA 0.25 + +[values] +brim_width = 8 +cool_fan_full_at_height = =layer_height_0 +cool_min_speed = 7 +infill_line_width = =line_width +infill_overlap = 10 +infill_pattern = grid +line_width = =machine_nozzle_size * 0.92 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature - 15 +skin_overlap = 5 +speed_layer_0 = =math.ceil(speed_print * 30 / 30) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 30) +speed_travel_layer_0 = 120 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) +top_bottom_thickness = 0.72 +wall_0_inset = 0.015 +wall_0_wipe_dist = 0.25 +wall_line_width = =line_width +wall_line_width_x= =line_width +wall_thickness = 0.7 + -- cgit v1.2.3