From 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 4 Sep 2019 09:23:27 +0200 Subject: Commit actual files instead of my symlinks I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git. Contributes to issue CURA-6742. --- .../um_s3_aa0.4_BAM_Draft_Print.inst.cfg | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg') diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg new file mode 100644 index 0000000000..98e79c0475 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_bam +variant = AA 0.4 + +[values] +brim_replaces_support = False +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +# prime_tower_enable: see CURA-4248 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +top_bottom_thickness = 1 +wall_thickness = 1 +support_brim_enable = True +support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 +support_join_distance = 5 +support_offset = 2 +support_pattern = triangles +support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10 -- cgit v1.2.3