From 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 4 Sep 2019 09:23:27 +0200 Subject: Commit actual files instead of my symlinks I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git. Contributes to issue CURA-6742. --- .../um_s3_aa0.4_Nylon_Fast_Print.inst.cfg | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg') diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg new file mode 100644 index 0000000000..afe5c03f8e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -0,0 +1,38 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_nylon +variant = AA 0.4 + +[values] +adhesion_type = brim +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +line_width = =machine_nozzle_size +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + +jerk_travel = 50 -- cgit v1.2.3