From 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 4 Sep 2019 09:23:27 +0200 Subject: Commit actual files instead of my symlinks I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git. Contributes to issue CURA-6742. --- .../um_s3_aa0.8_CPEP_Fast_Print.inst.cfg | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg') diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg new file mode 100644 index 0000000000..1465d5bb99 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Fast - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +retraction_hop = 0.1 +retraction_hop_enabled = False +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 15 +speed_topbottom = =math.ceil(speed_print * 35 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.6 / 0.7, 2) +support_z_distance = =layer_height +top_bottom_thickness = 1.2 -- cgit v1.2.3