From 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 4 Sep 2019 09:23:27 +0200 Subject: Commit actual files instead of my symlinks I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git. Contributes to issue CURA-6742. --- .../um_s3_cc0.6_PLA_Draft_Print.inst.cfg | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg (limited to 'resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg') diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..a5bdfad16a --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -3 +material = generic_pla +variant = CC 0.6 +is_experimental = True + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_pattern = ='triangles' +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x -- cgit v1.2.3