From d49920a0c146c75d5b67e49d5516dceb46e9ad80 Mon Sep 17 00:00:00 2001 From: AnnaKang0219 Date: Wed, 17 Nov 2021 17:02:53 +0800 Subject: update speed_wall update speed_wall for da Vinci Super --- .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg | 1 + 4 files changed, 4 insertions(+) (limited to 'resources/quality/xyzprinting/tough_pla') diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg index 2f824fc78d..47987f93ff 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg @@ -22,6 +22,7 @@ material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature speed_print = 30 speed_topbottom = 10 +speed_wall = =speed_print speed_infill = =speed_print speed_support = =speed_print speed_travel = 120 diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg index 6dcd9c2ba3..306e342917 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg @@ -22,6 +22,7 @@ material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature speed_print = 30 speed_topbottom = 10 +speed_wall = =speed_print speed_infill = =speed_print speed_support = =speed_print speed_travel = 120 diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg index 879903b89e..922f1e0e3f 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg @@ -22,6 +22,7 @@ material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature speed_print = 30 speed_topbottom = 10 +speed_wall = =speed_print speed_infill = =speed_print speed_support = =speed_print speed_travel = 120 diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg index da115601db..073d21abcf 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg @@ -22,6 +22,7 @@ material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature speed_print = 30 speed_topbottom = 10 +speed_wall = =speed_print speed_infill = =speed_print speed_support = =speed_print speed_travel = 120 -- cgit v1.2.3 From 072243d7132af46e68d200304677b70419730cec Mon Sep 17 00:00:00 2001 From: AnnaKang0219 Date: Wed, 1 Dec 2021 14:32:06 +0800 Subject: parameter update parameter update --- .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg | 1 + .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg | 1 + .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg | 1 + .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg | 1 + ...yzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg | 1 + ...xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg | 1 + .../xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg | 1 + ...yzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg | 1 + ...printing_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg | 1 + ...zprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg | 1 + ...yzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg | 1 + ...printing_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg | 1 + ...zprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg | 1 + ...yzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg | 1 + ...xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg | 1 + ...zprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg | 1 + .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg | 1 + .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg | 1 + .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg | 1 + .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg | 1 + .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg | 1 + 24 files changed, 24 insertions(+) (limited to 'resources/quality/xyzprinting/tough_pla') diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg index df7e677e35..e99bfb073a 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg index 830074f3af..2a048f026e 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg index 5780059f51..72e421ea67 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg index fc34b0eb74..d98a431339 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg index 1de1b31787..e93914a01f 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 +retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg index 66f8dd3e04..8b55d3caa7 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 +retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg index bbb4e23cb4..4cac344d79 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 +retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg index 6f50c1e7e0..cadedf8de1 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 +retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg index acfae47f0f..9bd0192715 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg index 7b22bca1fb..decb80ea83 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg index ce972259de..3c18db68eb 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg index 546a9b596d..ef2db7bb9b 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg index 860a31e4c9..b0d1db08b0 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg index 936f83a242..19a4deed4c 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg index 6c93eb9a87..7466dcb2f4 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg index a555c6299c..4d18cce269 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg index b8c026ad7b..e7e0d528da 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg index 6910e572b6..89b05d55dd 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg index 50e2b039a2..1d1ec31bad 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg index d1f5ad7d8a..1ecd062367 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg @@ -27,5 +27,6 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg index 47987f93ff..22eddcf5c0 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg index 306e342917..e72ac02ee9 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg index 922f1e0e3f..3cd34a2e26 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg index 073d21abcf..ccda6dba5a 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg @@ -28,5 +28,6 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 +retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file -- cgit v1.2.3 From e39601e0ba7bf1fa28d9f9d2596d7e9b99e09349 Mon Sep 17 00:00:00 2001 From: AnnaKang0219 Date: Wed, 12 Jan 2022 15:23:24 +0800 Subject: remove setting remove retraction_prime_speed = =retraction_speed in all profiles. --- .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg | 1 - .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg | 1 - .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg | 1 - .../xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg | 1 - ...yzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg | 1 - ...xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg | 1 - .../xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg | 1 - ...yzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg | 1 - ...printing_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg | 1 - ...zprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg | 1 - ...yzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg | 1 - ...printing_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg | 1 - ...zprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg | 1 - ...yzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg | 1 - ...xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg | 1 - ...zprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg | 1 - .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg | 1 - .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg | 1 - .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg | 1 - .../xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg | 1 - .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg | 1 - .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg | 1 - .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg | 1 - .../xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg | 1 - 24 files changed, 24 deletions(-) (limited to 'resources/quality/xyzprinting/tough_pla') diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg index e99bfb073a..df7e677e35 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg index 2a048f026e..830074f3af 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_draft.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg index 72e421ea67..5780059f51 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_fine.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg index d98a431339..fc34b0eb74 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_1p0_pro_copper_0.40_tough_pla_normal.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 4.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg index e93914a01f..1de1b31787 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_coarse.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 -retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg index 8b55d3caa7..66f8dd3e04 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_draft.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 -retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg index 4cac344d79..bbb4e23cb4 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_fine.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 -retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg index cadedf8de1..6f50c1e7e0 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_1p0a_pro_copper_0.40_tough_pla_normal.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 4.5 retraction_speed = 30 -retraction_prime_speed = =retraction_speed skirt_brim_speed = 30 infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg index 9bd0192715..acfae47f0f 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg index decb80ea83..7b22bca1fb 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg index 3c18db68eb..ce972259de 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg index ef2db7bb9b..546a9b596d 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg index b0d1db08b0..860a31e4c9 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg index 19a4deed4c..936f83a242 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg index 7466dcb2f4..6c93eb9a87 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg index 4d18cce269..a555c6299c 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.0 retraction_speed = 15 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg index e7e0d528da..b8c026ad7b 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg index 89b05d55dd..6910e572b6 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg index 1d1ec31bad..50e2b039a2 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg index 1ecd062367..d1f5ad7d8a 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg @@ -27,6 +27,5 @@ speed_support = =speed_print speed_travel = 100 retraction_amount = 5.0 retraction_speed = =speed_print -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg index 22eddcf5c0..47987f93ff 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg index e72ac02ee9..306e342917 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg index 3cd34a2e26..922f1e0e3f 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg index ccda6dba5a..073d21abcf 100644 --- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg @@ -28,6 +28,5 @@ speed_support = =speed_print speed_travel = 120 retraction_amount = 5.5 retraction_speed = 50 -retraction_prime_speed = =retraction_speed skirt_brim_speed = =speed_print infill_sparse_density = 10 \ No newline at end of file -- cgit v1.2.3