From b13a16c92189943eacf66316c263dd5bb1f16f83 Mon Sep 17 00:00:00 2001 From: Jordan Date: Tue, 19 Jul 2022 18:35:37 +0200 Subject: take review of failures --- resources/quality/nps/nps_ABS_A.inst.cfg | 7 ++++--- resources/quality/nps/nps_ABS_B.inst.cfg | 7 ++++--- resources/quality/nps/nps_ABS_C.inst.cfg | 7 ++++--- resources/quality/nps/nps_PC_A.inst.cfg | 9 +++++---- resources/quality/nps/nps_PC_B.inst.cfg | 3 ++- resources/quality/nps/nps_PC_C.inst.cfg | 3 ++- resources/quality/nps/nps_PETG_A.inst.cfg | 7 ++++--- resources/quality/nps/nps_PETG_B.inst.cfg | 7 ++++--- resources/quality/nps/nps_PETG_C.inst.cfg | 7 ++++--- resources/quality/nps/nps_PLA_A.inst.cfg | 7 ++++--- resources/quality/nps/nps_PLA_B.inst.cfg | 7 ++++--- resources/quality/nps/nps_PLA_C.inst.cfg | 7 ++++--- resources/quality/nps/nps_TPU_A.inst.cfg | 7 ++++--- resources/quality/nps/nps_TPU_B.inst.cfg | 7 ++++--- resources/quality/nps/nps_TPU_C.inst.cfg | 7 ++++--- 15 files changed, 57 insertions(+), 42 deletions(-) (limited to 'resources/quality') diff --git a/resources/quality/nps/nps_ABS_A.inst.cfg b/resources/quality/nps/nps_ABS_A.inst.cfg index 28de2e7a4f..bd7502314e 100644 --- a/resources/quality/nps/nps_ABS_A.inst.cfg +++ b/resources/quality/nps/nps_ABS_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = a weight = 1 -material = naxe_ABS +material = generic_abs [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 19 * layer_height cool_min_speed = 10 support_angle = 65 -material_print_temperature = =default_material_print_temperature + 1 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =240 +material_print_temperature_layer_0 = =240 +material_bed_temperature = 100 material_flow = 100 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_ABS_B.inst.cfg b/resources/quality/nps/nps_ABS_B.inst.cfg index 516bc72ccd..7e0436d1a6 100644 --- a/resources/quality/nps/nps_ABS_B.inst.cfg +++ b/resources/quality/nps/nps_ABS_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = b weight = 0 -material = naxe_ABS +material = generic_abs [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height cool_min_speed = 10 support_angle = 60 -material_print_temperature = =default_material_print_temperature + 3 -material_print_temperature_layer_0 = =default_material_print_temperature + 1 +material_print_temperature = =243 +material_print_temperature_layer_0 = =243 +material_bed_temperature = 100 material_flow = 96 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_ABS_C.inst.cfg b/resources/quality/nps/nps_ABS_C.inst.cfg index 31ef47a43a..5a07d098e4 100644 --- a/resources/quality/nps/nps_ABS_C.inst.cfg +++ b/resources/quality/nps/nps_ABS_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = c weight = -1 -material = naxe_ABS +material = generic_abs [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +3 +material_print_temperature = =245 +material_print_temperature_layer_0 = =245 +material_bed_temperature = 100 material_flow = 91 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_A.inst.cfg b/resources/quality/nps/nps_PC_A.inst.cfg index 90d95b340f..3a7b22ab5c 100644 --- a/resources/quality/nps/nps_PC_A.inst.cfg +++ b/resources/quality/nps/nps_PC_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = a weight = 1 -material = naxe_PC +material = generic_pc [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) @@ -31,9 +31,10 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 12 support_angle = 60 cool_lift_head = true -material_print_temperature = 260 -material_print_temperature_layer_0 = 265 -material_flow = 88 +material_print_temperature = =280 +material_print_temperature_layer_0 = =280 +material_bed_temperature = 110 +material_flow = 100 wall_line_count = 3 retraction_extra_prime_amount = 0.1 retraction_speed = 30 diff --git a/resources/quality/nps/nps_PC_B.inst.cfg b/resources/quality/nps/nps_PC_B.inst.cfg index 0611313995..a1db650a72 100644 --- a/resources/quality/nps/nps_PC_B.inst.cfg +++ b/resources/quality/nps/nps_PC_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = b weight = 0 -material = naxe_PC +material = generic_pc [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) @@ -33,6 +33,7 @@ cool_lift_head = true support_angle = 60 material_print_temperature = 270 material_print_temperature_layer_0 = 275 +material_bed_temperature = 110 material_flow = 88 wall_line_count = 3 retraction_speed = 30 diff --git a/resources/quality/nps/nps_PC_C.inst.cfg b/resources/quality/nps/nps_PC_C.inst.cfg index 0e26f46fdf..22ba7dcbd4 100644 --- a/resources/quality/nps/nps_PC_C.inst.cfg +++ b/resources/quality/nps/nps_PC_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = c weight = -1 -material = naxe_PC +material = generic_pc [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) @@ -33,6 +33,7 @@ support_angle = 60 cool_lift_head = true material_print_temperature = 270 material_print_temperature_layer_0 = 275 +material_bed_temperature = 110 material_flow = 88 wall_line_count = 3 retraction_speed = 30 diff --git a/resources/quality/nps/nps_PETG_A.inst.cfg b/resources/quality/nps/nps_PETG_A.inst.cfg index efdd6d525c..c9e9a74c24 100644 --- a/resources/quality/nps/nps_PETG_A.inst.cfg +++ b/resources/quality/nps/nps_PETG_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = a weight = 1 -material = naxe_PETG +material = generic_petg [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height cool_min_speed = 10 support_angle = 65 -material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =235 +material_print_temperature_layer_0 = =230 +material_bed_temperature = 80 material_flow = 98 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg index aa7eb30599..c5f96c383f 100644 --- a/resources/quality/nps/nps_PETG_B.inst.cfg +++ b/resources/quality/nps/nps_PETG_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = b weight = 0 -material = naxe_PETG +material = generic_petg [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height cool_min_speed = 10 support_angle = 60 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =235 +material_print_temperature_layer_0 = =230 +material_bed_temperature = 80 material_flow = 95 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_C.inst.cfg b/resources/quality/nps/nps_PETG_C.inst.cfg index ca13ce1b30..04ef5fa32e 100644 --- a/resources/quality/nps/nps_PETG_C.inst.cfg +++ b/resources/quality/nps/nps_PETG_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = c weight = -1 -material = naxe_PETG +material = generic_petg [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_print_temperature = =235 +material_print_temperature_layer_0 = =230 +material_bed_temperature = 80 material_flow = 91 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PLA_A.inst.cfg b/resources/quality/nps/nps_PLA_A.inst.cfg index 39c83cefe4..d36c6c4af3 100644 --- a/resources/quality/nps/nps_PLA_A.inst.cfg +++ b/resources/quality/nps/nps_PLA_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = a weight = 1 -material = naxe_PLA +material = generic_pla [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 support_angle = 65 -material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =default_material_print_temperature -5 +material_print_temperature = =215 +material_print_temperature_layer_0 = =210 +material_bed_temperature = 60 material_flow = 98 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PLA_B.inst.cfg b/resources/quality/nps/nps_PLA_B.inst.cfg index 03407e6fa7..df117d52c2 100644 --- a/resources/quality/nps/nps_PLA_B.inst.cfg +++ b/resources/quality/nps/nps_PLA_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = b weight = 0 -material = naxe_PLA +material = generic_pla [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 support_angle = 60 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =215 +material_print_temperature_layer_0 = =220 +material_bed_temperature = 60 material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PLA_C.inst.cfg b/resources/quality/nps/nps_PLA_C.inst.cfg index 852fefa293..2a5c64f616 100644 --- a/resources/quality/nps/nps_PLA_C.inst.cfg +++ b/resources/quality/nps/nps_PLA_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = c weight = -1 -material = naxe_PLA +material = generic_pla [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_print_temperature = =215 +material_print_temperature_layer_0 = =220 +material_bed_temperature = 60 material_flow = 91 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_TPU_A.inst.cfg b/resources/quality/nps/nps_TPU_A.inst.cfg index 6b334ffe31..3962513493 100644 --- a/resources/quality/nps/nps_TPU_A.inst.cfg +++ b/resources/quality/nps/nps_TPU_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = a weight = 1 -material = naxe_TPU +material = generic_tpu [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 support_angle = 50 -material_print_temperature = =default_material_print_temperature + 3 -material_print_temperature_layer_0 = =default_material_print_temperature - 3 +material_print_temperature = =215 +material_print_temperature_layer_0 = =215 +material_bed_temperature = 45 material_flow = 107 retraction_extra_prime_amount = 0.2 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_TPU_B.inst.cfg b/resources/quality/nps/nps_TPU_B.inst.cfg index e5ae5d323c..082b83ee45 100644 --- a/resources/quality/nps/nps_TPU_B.inst.cfg +++ b/resources/quality/nps/nps_TPU_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = b weight = 0 -material = naxe_TPU +material = generic_tpu [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 support_angle = 50 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =215 +material_print_temperature_layer_0 = =210 +material_bed_temperature = 45 material_flow = 103 retraction_extra_prime_amount = 0.2 retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_TPU_C.inst.cfg b/resources/quality/nps/nps_TPU_C.inst.cfg index bef1a0a29c..d52fe0f941 100644 --- a/resources/quality/nps/nps_TPU_C.inst.cfg +++ b/resources/quality/nps/nps_TPU_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 19 type = quality quality_type = c weight = -1 -material = naxe_TPU +material = generic_tpu [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) @@ -30,8 +30,9 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 support_angle = 50 -material_print_temperature = =default_material_print_temperature + 7 -material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_print_temperature = =215 +material_print_temperature_layer_0 = =215 +material_bed_temperature = 45 material_flow = 101 retraction_extra_prime_amount = 0.2 retraction_min_travel = =3*line_width -- cgit v1.2.3