# Copyright (c) 2018 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. import configparser #To get version numbers from config files. from typing import Dict, Iterable, List, Optional, Set, Tuple from UM.VersionUpgrade import VersionUpgrade # Superclass of the plugin. from . import MachineInstance # To upgrade machine instances. from . import Preferences #To upgrade preferences. from . import Profile # To upgrade profiles. ## Which machines have material-specific profiles in the new version? # # These are the 2.1 machine identities with "has_machine_materials": true in # their definitions in Cura 2.2. So these are the machines for which profiles # need to split into multiple profiles, one for each material and variant. # # Each machine has the materials and variants listed in which it needs to # split, since those might be different per machine. # # This should contain the definition as they are stated in the profiles. The # inheritance structure cannot be found at this stage, since the definitions # may have changed in later versions than 2.2. _machines_with_machine_quality = { "ultimaker2plus": { "materials": { "generic_abs", "generic_cpe", "generic_pla", "generic_pva", "generic_cpe_plus", "generic_nylon", "generic_pc", "generic_tpu" }, "variants": { "0.25 mm", "0.4 mm", "0.6 mm", "0.8 mm" } }, "ultimaker2_extended_plus": { "materials": { "generic_abs", "generic_cpe", "generic_pla", "generic_pva", "generic_cpe_plus", "generic_nylon", "generic_pc", "generic_tpu" }, "variants": { "0.25 mm", "0.4 mm", "0.6 mm", "0.8 mm" } } } # type: Dict[str, Dict[str, Set[str]]] ## How to translate material names from the old version to the new. _material_translations = { "PLA": "generic_pla", "ABS": "generic_abs", "CPE": "generic_cpe", "CPE+": "generic_cpe_plus", "Nylon": "generic_nylon", "PC": "generic_pc", "TPU": "generic_tpu", } # type: Dict[str, str] ## How to translate material names for in the profile names. _material_translations_profiles = { "PLA": "pla", "ABS": "abs", "CPE": "cpe", "CPE+": "cpep", "Nylon": "nylon", "PC": "pc", "TPU": "tpu", } # type: Dict[str, str] ## How to translate printer names from the old version to the new. _printer_translations = { "ultimaker2plus": "ultimaker2_plus" } # type: Dict[str, str] _printer_translations_profiles = { "ultimaker2plus": "um2p", #Does NOT get included in PLA profiles! "ultimaker2_extended_plus": "um2ep" #Has no profiles for CPE+, Nylon, PC and TPU! } # type: Dict[str, str] ## How to translate profile names from the old version to the new. # # This must have an entry for every built-in profile, since it also services # as a set for which profiles were built-in. _profile_translations = { "Low Quality": "low", "Normal Quality": "normal", "High Quality": "high", "Ulti Quality": "high", #This one doesn't have an equivalent. Map it to high. "abs_0.25_normal": "um2p_abs_0.25_normal", "abs_0.4_fast": "um2p_abs_0.4_fast", "abs_0.4_high": "um2p_abs_0.4_high", "abs_0.4_normal": "um2p_abs_0.4_normal", "abs_0.6_normal": "um2p_abs_0.6_normal", "abs_0.8_normal": "um2p_abs_0.8_normal", "cpe_0.25_normal": "um2p_cpe_0.25_normal", "cpe_0.4_fast": "um2p_cpe_0.4_fast", "cpe_0.4_high": "um2p_cpe_0.4_high", "cpe_0.4_normal": "um2p_cpe_0.4_normal", "cpe_0.6_normal": "um2p_cpe_0.6_normal", "cpe_0.8_normal": "um2p_cpe_0.8_normal", "cpep_0.4_draft": "um2p_cpep_0.4_draft", "cpep_0.4_normal": "um2p_cpep_0.4_normal", "cpep_0.6_draft": "um2p_cpep_0.6_draft", "cpep_0.6_normal": "um2p_cpep_0.6_normal", "cpep_0.8_draft": "um2p_cpep_0.8_draft", "cpep_0.8_normal": "um2p_cpep_0.8_normal", "nylon_0.25_high": "um2p_nylon_0.25_high", "nylon_0.25_normal": "um2p_nylon_0.25_normal", "nylon_0.4_fast": "um2p_nylon_0.4_fast", "nylon_0.4_normal": "um2p_nylon_0.4_normal", "nylon_0.6_fast": "um2p_nylon_0.6_fast", "nylon_0.6_normal": "um2p_nylon_0.6_normal", "nylon_0.8_draft": "um2p_nylon_0.8_draft", "nylon_0.8_normal": "um2p_nylon_0.8_normal", "pc_0.25_high": "um2p_pc_0.25_high", "pc_0.25_normal": "um2p_pc_0.25_normal", "pc_0.4_fast": "um2p_pc_0.4_fast", "pc_0.4_normal": "um2p_pc_0.4_normal", "pc_0.6_fast": "um2p_pc_0.6_fast", "pc_0.6_normal": "um2p_pc_0.6_normal", "pc_0.8_draft": "um2p_pc_0.8_draft", "pc_0.8_normal": "um2p_pc_0.8_normal", "pla_0.25_normal": "pla_0.25_normal", #Note that the PLA profiles don't get the um2p_ prefix, though they are for UM2+. "pla_0.4_fast": "pla_0.4_fast", "pla_0.4_high": "pla_0.4_high", "pla_0.4_normal": "pla_0.4_normal", "pla_0.6_normal": "pla_0.6_normal", "pla_0.8_normal": "pla_0.8_normal", "tpu_0.25_high": "um2p_tpu_0.25_high", "tpu_0.4_normal": "um2p_tpu_0.4_normal", "tpu_0.6_fast": "um2p_tpu_0.6_fast" } # type: Dict[str, str] ## Settings that are no longer in the new version. _removed_settings = { "fill_perimeter_gaps", "support_area_smoothing" } # type: Set[str] ## How to translate setting names from the old version to the new. _setting_name_translations = { "remove_overlapping_walls_0_enabled": "travel_compensate_overlapping_walls_0_enabled", "remove_overlapping_walls_enabled": "travel_compensate_overlapping_walls_enabled", "remove_overlapping_walls_x_enabled": "travel_compensate_overlapping_walls_x_enabled", "retraction_hop": "retraction_hop_enabled", "skin_overlap": "infill_overlap", "skirt_line_width": "skirt_brim_line_width", "skirt_minimal_length": "skirt_brim_minimal_length", "skirt_speed": "skirt_brim_speed", "speed_support_lines": "speed_support_infill", "speed_support_roof": "speed_support_interface", "support_roof_density": "support_interface_density", "support_roof_enable": "support_interface_enable", "support_roof_extruder_nr": "support_interface_extruder_nr", "support_roof_line_distance": "support_interface_line_distance", "support_roof_line_width": "support_interface_line_width", "support_roof_pattern": "support_interface_pattern" } # type: Dict[str, str] ## Custom profiles become quality_changes. This dictates which quality to base # the quality_changes profile on. # # Which quality profile to base the quality_changes on depends on the machine, # material and nozzle. # # If a current configuration is missing, fall back to "normal". _quality_fallbacks = { "ultimaker2_plus": { "ultimaker2_plus_0.25": { "generic_abs": "um2p_abs_0.25_normal", "generic_cpe": "um2p_cpe_0.25_normal", #No CPE+. "generic_nylon": "um2p_nylon_0.25_normal", "generic_pc": "um2p_pc_0.25_normal", "generic_pla": "pla_0.25_normal", "generic_tpu": "um2p_tpu_0.25_high" }, "ultimaker2_plus_0.4": { "generic_abs": "um2p_abs_0.4_normal", "generic_cpe": "um2p_cpe_0.4_normal", "generic_cpep": "um2p_cpep_0.4_normal", "generic_nylon": "um2p_nylon_0.4_normal", "generic_pc": "um2p_pc_0.4_normal", "generic_pla": "pla_0.4_normal", "generic_tpu": "um2p_tpu_0.4_normal" }, "ultimaker2_plus_0.6": { "generic_abs": "um2p_abs_0.6_normal", "generic_cpe": "um2p_cpe_0.6_normal", "generic_cpep": "um2p_cpep_0.6_normal", "generic_nylon": "um2p_nylon_0.6_normal", "generic_pc": "um2p_pc_0.6_normal", "generic_pla": "pla_0.6_normal", "generic_tpu": "um2p_tpu_0.6_fast", }, "ultimaker2_plus_0.8": { "generic_abs": "um2p_abs_0.8_normal", "generic_cpe": "um2p_cpe_0.8_normal", "generic_cpep": "um2p_cpep_0.8_normal", "generic_nylon": "um2p_nylon_0.8_normal", "generic_pc": "um2p_pc_0.8_normal", "generic_pla": "pla_0.8_normal", #No TPU. } } } # type: Dict[str, Dict[str, Dict[str, str]]] ## How to translate variants of specific machines from the old version to the # new. _variant_translations = { "ultimaker2_plus": { "0.25 mm": "ultimaker2_plus_0.25", "0.4 mm": "ultimaker2_plus_0.4", "0.6 mm": "ultimaker2_plus_0.6", "0.8 mm": "ultimaker2_plus_0.8" }, "ultimaker2_extended_plus": { "0.25 mm": "ultimaker2_extended_plus_0.25", "0.4 mm": "ultimaker2_extended_plus_0.4", "0.6 mm": "ultimaker2_extended_plus_0.6", "0.8 mm": "ultimaker2_extended_plus_0.8" } } # type: Dict[str, Dict[str, str]] ## How to translate variant names for in the profile names. _variant_translations_profiles = { "0.25 mm": "0.25", "0.4 mm": "0.4", "0.6 mm": "0.6", "0.8 mm": "0.8" } # type: Dict[str, str] ## Cura 2.2's material profiles use a different naming scheme for variants. # # Getting pretty stressed out by this sort of thing... _variant_translations_materials = { "ultimaker2_plus": { "0.25 mm": "ultimaker2_plus_0.25_mm", "0.4 mm": "ultimaker2_plus_0.4_mm", "0.6 mm": "ultimaker2_plus_0.6_mm", "0.8 mm": "ultimaker2_plus_0.8_mm" }, "ultimaker2_extended_plus": { "0.25 mm": "ultimaker2_plus_0.25_mm", "0.4 mm": "ultimaker2_plus_0.4_mm", "0.6 mm": "ultimaker2_plus_0.6_mm", "0.8 mm": "ultimaker2_plus_0.8_mm" } } # type: Dict[str, Dict[str, str]] ## Converts configuration from Cura 2.1's file formats to Cura 2.2's. # # It converts the machine instances and profiles. class VersionUpgrade21to22(VersionUpgrade): ## Gets the fallback quality to use for a specific machine-variant-material # combination. # # For custom profiles we fall back onto this quality profile, since we # don't know which quality profile it was based on. # # \param machine The machine ID of the user's configuration in 2.2. # \param variant The variant ID of the user's configuration in 2.2. # \param material The material ID of the user's configuration in 2.2. @staticmethod def getQualityFallback(machine: str, variant: str, material: str) -> str: if machine not in _quality_fallbacks: return "normal" if variant not in _quality_fallbacks[machine]: return "normal" if material not in _quality_fallbacks[machine][variant]: return "normal" return _quality_fallbacks[machine][variant][material] ## Gets the set of built-in profile names in Cura 2.1. # # This is required to test if profiles should be converted to a quality # profile or a quality-changes profile. @staticmethod def builtInProfiles() -> Iterable[str]: return _profile_translations.keys() ## Gets a set of the machines which now have per-material quality profiles. # # \return A set of machine identifiers. @staticmethod def machinesWithMachineQuality() -> Dict[str, Dict[str, Set[str]]]: return _machines_with_machine_quality ## Converts machine instances from format version 1 to version 2. # # \param serialised The serialised machine instance in version 1. # \param filename The supposed file name of the machine instance, without # extension. # \return A tuple containing the new filename and the serialised machine # instance in version 2, or None if the input was not of the correct # format. def upgradeMachineInstance(self, serialised: str, filename: str) -> Optional[Tuple[List[str], List[str]]]: machine_instance = MachineInstance.importFrom(serialised, filename) if not machine_instance: #Invalid file format. return None return machine_instance.export() ## Converts preferences from format version 2 to version 3. # # \param serialised The serialised preferences file in version 2. # \param filename The supposed file name of the preferences file, without # extension. # \return A tuple containing the new filename and the serialised # preferences in version 3, or None if the input was not of the correct # format. def upgradePreferences(self, serialised: str, filename: str) -> Optional[Tuple[List[str], List[str]]]: preferences = Preferences.importFrom(serialised, filename) if not preferences: #Invalid file format. return None return preferences.export() ## Converts profiles from format version 1 to version 2. # # \param serialised The serialised profile in version 1. # \param filename The supposed file name of the profile, without # extension. # \return A tuple containing the new filename and the serialised profile # in version 2, or None if the input was not of the correct format. def upgradeProfile(self, serialised: str, filename: str) -> Optional[Tuple[List[str], List[str]]]: profile = Profile.importFrom(serialised, filename) if not profile: # Invalid file format. return None return profile.export() ## Translates a material name for the change from Cura 2.1 to 2.2. # # \param material A material name in Cura 2.1. # \return The name of the corresponding material in Cura 2.2. @staticmethod def translateMaterial(material: str) -> str: if material in _material_translations: return _material_translations[material] return material ## Translates a material name for the change from Cura 2.1 to 2.2 in # quality profile names. # # \param material A material name in Cura 2.1. # \return The name of the corresponding material in the quality profiles # in Cura 2.2. @staticmethod def translateMaterialForProfiles(material: str) -> str: if material in _material_translations_profiles: return _material_translations_profiles[material] return material ## Translates a printer name that might have changed since the last # version. # # \param printer A printer name in Cura 2.1. # \return The name of the corresponding printer in Cura 2.2. @staticmethod def translatePrinter(printer: str) -> str: if printer in _printer_translations: return _printer_translations[printer] return printer #Doesn't need to be translated. ## Translates a printer name for the change from Cura 2.1 to 2.2 in quality # profile names. # # \param printer A printer name in 2.1. # \return The name of the corresponding printer in Cura 2.2. @staticmethod def translatePrinterForProfile(printer: str) -> str: if printer in _printer_translations_profiles: return _printer_translations_profiles[printer] return printer ## Translates a built-in profile name that might have changed since the # last version. # # \param profile A profile name in the old version. # \return The corresponding profile name in the new version. @staticmethod def translateProfile(profile: str) -> str: if profile in _profile_translations: return _profile_translations[profile] return profile #Doesn't need to be translated. ## Updates settings for the change from Cura 2.1 to 2.2. # # The keys and values of settings are changed to what they should be in # the new version. Each setting is changed in-place in the provided # dictionary. This changes the input parameter. # # \param settings A dictionary of settings (as key-value pairs) to update. # \return The same dictionary. @staticmethod def translateSettings(settings: Dict[str, str]) -> Dict[str, str]: new_settings = {} for key, value in settings.items(): if key in _removed_settings: continue if key == "retraction_combing": #Combing was made into an enum instead of a boolean. new_settings[key] = "off" if (value == "False") else "all" continue if key == "cool_fan_full_layer": #Layer counting was made one-indexed. new_settings[key] = str(int(value) + 1) continue if key in _setting_name_translations: new_settings[_setting_name_translations[key]] = value continue new_settings[key] = value return new_settings ## Translates a setting name for the change from Cura 2.1 to 2.2. # # \param setting The name of a setting in Cura 2.1. # \return The name of the corresponding setting in Cura 2.2. @staticmethod def translateSettingName(setting: str) -> str: if setting in _setting_name_translations: return _setting_name_translations[setting] return setting #Doesn't need to be translated. ## Translates a variant name for the change from Cura 2.1 to 2.2 # # \param variant The name of a variant in Cura 2.1. # \param machine The name of the machine this variant is part of in Cura # 2.2's naming. # \return The name of the corresponding variant in Cura 2.2. @staticmethod def translateVariant(variant: str, machine: str) -> str: if machine in _variant_translations and variant in _variant_translations[machine]: return _variant_translations[machine][variant] return variant ## Translates a variant name for the change from Cura 2.1 to 2.2 in # material profiles. # # \param variant The name of the variant in Cura 2.1. # \param machine The name of the machine this variant is part of in Cura # 2.2's naming. # \return The name of the corresponding variant for in material profiles # in Cura 2.2. @staticmethod def translateVariantForMaterials(variant: str, machine: str) -> str: if machine in _variant_translations_materials and variant in _variant_translations_materials[machine]: return _variant_translations_materials[machine][variant] return variant ## Translates a variant name for the change from Cura 2.1 to 2.2 in quality # profiles. # # \param variant The name of the variant in Cura 2.1. # \return The name of the corresponding variant for in quality profiles in # Cura 2.2. @staticmethod def translateVariantForProfiles(variant: str) -> str: if variant in _variant_translations_profiles: return _variant_translations_profiles[variant] return variant